Chemical Engineering Commons^™

Removal Of Sustained Casing Pressure By Gravity Displacement Of Annular Fluid, Efecan Demirci

LSU Master's Theses

Sustained Casing Pressure (SCP) is the undesirable casing head pressure of a well annulus that rebuilds when bled-down. As the conventional methods for SCP removal using rigs are expensive, there is a need for improvement. Annular intervention for replacing the fluid above the leaking cement with a heavier fluid to stop gas migration is a solution for SCP removal; however, previous attempts failed due to miscibility of injected fluids. Using hydrophobic heavy fluids for the purpose is a newly proposed technique to the technology. Potential of theoretically selected and produced immiscible heavy fluids are investigated in characterized annular fluids. A …

Investigation Of Dimensionality-Dependent Foam Rheological Properties By Using Mechanistic Foam Model, Woochan Lee

LSU Master's Theses

A numerous laboratory and field tests revealed that foam can effectively control gas mobility, improve sweep efficiency, and increase oil production, if correctly designed. It is believed that there is a significant gap between small laboratory-scale experiments and large field-scale tests because of two main reasons: (i) typical laboratory flow tests are conducted in linear systems, while field-scale foam EOR processes are performed in radial (or spherical partly) systems in general; and (ii) through the complicated in-situ lamella creation and coalescence mechanisms and non-Newtonian behavior, foam rheology is thought to depend on geometry and dimensionality and, as a result, it …

Analysis Of Microseismic Events Associated With Hydraulic Fracture Propagation, Chennu Fan

LSU Master's Theses

Previous practice to determine the source mechanism of microseismic events associated with hydraulic fracture typically includes only far-field terms in moment tensor inversion. The intermediate-field terms and near-field term are normally ignored because of increased complexity in the calculation. Source-receiver distances in hydraulic fracturing are usually 1000 ft and the effects of near and intermediate-field terms are still unknown. We perform a study to improve the precision of the source mechanism by including the intermediate-field term in moment tensor inversion. We find that the intermediate-field term contributes 1/3 of the signal amplitude when the source-receiver distance is 1000 ft. The …

Continuous Reservoir Modeling Updating By Integrating Experimental Data Using An Ensemble Kalman Filter, Ting Sun

LSU Doctoral Dissertations

The continuous researvoir model updating is widely used to calibrate reservoir simulation models to production data, but many challenges remain. First, few real field data are available to test the new history matching method, and most of the data sets are synthetic cases. Second, computational cost may be high when using non-Gaussian priors or nonlinear models. Third, with large complex models, the simulation runs and history matching method require huge memory allocations. This dissertation achieves a continuous reservoir model updating workflow with a meter-scale , two-phase flow experiment. Both production and seismic data are collected in the experiment. Because the …

Poroelastic Inhomogeneities: Applications In Reservoir Geomechanics, Houman Bedayat

LSU Doctoral Dissertations

The scarce amount of conventional hydrocarbon reservoirs and increase of fuel consumption in the world have made production from unconventional hydrocarbon resources inevitable. Because of the low permeability of unconventional formations, fractures are the main paths for the fluid to flow. Therefore, detailed knowledge of the size, orientation, and permeability of the fracture systems are essential for reservoir engineers. Permeability of the fractures is function of their volume and opening, and stress and fluid pore pressure distribution in the formation. Since reservoir pressure may change over the production life of the reservoir, studying stress redistribution and mechanical behavior of the …

Gas Composition Analysis Using Limited Production Data Eagle Ford Case Study, Ryckur K. Shuttler

Honors Capstones

No abstract provided.

The Biological Impact Of Concurrent Exposure To Metallic Nanoparticles And A Static Magnetic Field, Kristen K. Comfort, Elizabeth I. Maurer, Saber M. Hussain

Chemical and Materials Engineering Faculty Publications

The rapid advancement of technology has led to an exponential increase of both nanomaterial and magnetic field utilization in applications spanning a variety of sectors. While extensive work has focused on the impact of these two variables on biological systems independently, the existence of any synergistic effects following concurrent exposure has yet to be investigated. This study sought to ascertain the induced alterations to the stress and proliferation responses of the human adult low calcium, high temperature keratinocyte (HaCaT) cell line by the application of a static magnetic field (approximately 0.5 or 30 mT) in conjunction with either gold or …

Effects Of Enhanced Oil Recovery On Production Engineers, Elm Coulee Field, Bakken Reservoir, Richland County, Montana, Burt J. Todd, Ph.D., John Evans, Leo Heath, David Reichhardt

Petroleum Engineering

This presentation describes research at Montana Tech to improve oil recovery rates in the Elm Coulee Oil Field in the Bakken Reservoir, Richmond County, Montana. The slides display current recovery rate predictions, enhanced oil recovery methods, reservoir model building and history matching strategies. Recommended development strategies include implementing hydrocarbon gas injection operations to improve current oil recovery rates by more than 75%. The impact of increased production on Production Engineers is also described. The Principal Investigators include John Evans, Leo Heath, David Reichhardt and Burt Todd in the Petroleum Engineering Department.

Slab Flattening Trigger For Isotopic Disturbance And Magmatic Flareup In The Southernmost Sierra Nevada Batholith, California, Alan D. Chapman, Jason B. Saleeby, John Eiler

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The San Emigdio Schist of Southern California permits examination of partial melting and devolatilization processes along a Late Cretaceous shallow subduction zone. Detrital and recrystallized zircon of the structurally highest portions of the schist bracket the depositional age to between ca. 102 and 98 Ma. Zircon oxygen isotope data from both lower-plate schist and upper-plate assemblages of the Sierra Nevada batholith (SNB) reveal a δ18O shift of ̃1.5% between igneous (̃5.5%) and recrystallized (̃7%) domains. These results, taken with previous zircon and whole-rock δ18O measurements, provide evidence for devolatilization and/or partial melting of the schist and fluid ascent through overlying …

Decoupling The Stationary Navier-Stokes-Darcy System With The Beavers-Joseph-Saffman Interface Condition, Yong Cao, Yuchuan Chu, Xiaoming He, Mingzhen Wei

Mathematics and Statistics Faculty Research & Creative Works

This paper proposes a domain decomposition method for the coupled stationary Navier-Stokes and Darcy equations with the Beavers-Joseph-Saffman interface condition in order to improve the efficiency of the finite element method. The physical interface conditions are directly utilized to construct the boundary conditions on the interface and then decouple the Navier-Stokes and Darcy equations. Newton iteration will be used to deal with the nonlinear systems. Numerical results are presented to illustrate the features of the proposed method.

Enzymatic Production Of Biodiesel From Fats Extracted From Lamb Meat Using Supercritical Co2, Hanifa Easa Taher

Theses

Due to the reduction in fossil fuel reserves and associated environmental impacts from using petroleum fuels, biodiesel has been presented as a feasible alternative because it is sustainable and environmentally friendly. In this study, it is proposed to investigate the feasibility of enzymatic production of biodiesel from waste animal fats using supercritical fluid technology for the extraction and reaction. The operating conditions that resulted in the optimum extraction and biodiesel production yield were identified. To the best of my knowledge of the investigators, the waste animal fat extracted by supercritical CO₂ (SC-CO₂) for the production of biodiesel …

A Framework For Oil Price Benchmark Determination: Lessons For Nigeria, Taiwo H. Sanni, Bassey D. Akpan

Bullion

The main thrust of this paper is to draw lessons of experience from other selected oil producing countries. the outcome of the study is expected to help in strengthening Nigeria's oil price framework in line with international best practice. Section 2 dwells on the theoretical and literature review on oil based fiscal rule, while section 3 presents the framework for oil price benchmark determination and section 4 examines those factors capable of stimulating determination of oil price benchmark, lastly section 5 discusses some lessons of experience from Nigeria and then the conclusion.

Fuel Subsidy And Other Unproductive Public Expenditures Removal: A Pragmatic Approach To Restructure And Transform The Nigerian Economy, Lawrence O. Akinboyo

Bullion

While the short term measures to reduce recurrent expenditure are necessary conditions for fiscal sustainability, the long term imperative is to increase revenue. Thus, efforts should be made by the fiscal authorities in Nigeria to pursue the policy of balancing of expenditure with revenue improvements. The issues of the underperformance of the capital budget should be reversed before savings from cuts in recurrent expenditure can be diverted to the financing of capital expenditure. From the analysis, we say that removal of fuel subsidy would no doubt have some social and economic hardship on the people in the short run, However, …

Minimizing Formation Damage For Preformed Particle Gels Treatment In Mature Reservoirs, Mahmoud Omran Elsharafi

Doctoral Dissertations

"This research studied the effect of preformed particle gels (PPGs) on unswept, low-permeable zones/areas. The objective was to find methods that minimized the damage caused by PPGs on unswept, low-permeable zones/areas, thus improving PPG treatment efficiency. These results can help to identify of the best PPG types, particle sizes, and brine concentrations for specific reservoirs and treatments. This study used sandstone core samples with various degrees of permeability. Two types of particle gels, a strong Daqing gel (DQ) and a weak Liquiblock™ 40k gel (40K), were used, each with a different strength.

This research included two stages. Firstly, both a …

Comparison Of Class Ii Injection Well Area Of Review Requirements With Area Of Evaluation For Hydraulically Fractured Wells, Yashesh Jitendra Panchal

Masters Theses

"Since 2010 the US Environmental Protection Agency (EPA) has been proposing plans to study, and has now initiated research regarding the potential impact of hydraulic fracturing processes on drinking water sources. Their work refers to an 'Area of Evaluation' around a hydraulically fractured well, inferring that the wells immediately around hydraulic fractured wells should be studied, to evaluate the conditions of these wells and their potential to contaminate overlying USDWs. Class II injection wells must have a minimum 1/4 mile radius area of review to determine the condition of wells surrounding the proposed injection well. All wells within this AOR …

Tensile Failure During Structural Development Of Single-Layer Buckle Folds, Xiaolong Liu

Masters Theses

"Folds and fold trains of sedimentary strata are among the most common structural traps systems for hydrocarbon reservoirs. The existence of tensile fractures associated to buckle folding is associated to the distribution of extensional strain in the outer arc of the fold hinges. This study investigates the conditions under which tensile stresses develop due to buckling in a realistic in situ stress scenario. By applying a 2D finite element modeling approach, the influence of realistic mechanical stratigraphy (including strain rate, overburden depth, competence contrasts, viscosity, and permeability) on the development of single-layer buckle folds with Newtonian viscous rheology is studied. …

Gas And Water Flow Through Nanoscale Porous Media, Songyuan Liu

Masters Theses

"This work provides a lab experiment to describe the fluid diffusion in nanoscale porous media. By using ideal ceramic membranes which have uniform pore size in nanoscale and homogeneous pore distribution instead of shale or tight sandstone which have various pore sizes and complicated pore distribution and structure, a better understanding of fluid flow through nanoscale porous media could be gained.

Core flooding test were conducted by injecting nitrogen and water separately to describe gas and liquid flow in nanoscale porous media. With all the other factors known or controlled, pressure and flow rate were measured to calculate permeability. By …

Comparison Of Square Root Of Time Approach And Statistical Approach To Minimize Subjectivity In The Determination Of Minimum In-Situ Stress, Soumitra Bhaskar Nande

Masters Theses

"A formation's minimum in-situ stress is an important parameter to determine for hydraulic fracturing. While minimum in-situ stress, and its orientation, can be measured from triaxial tests on core, it is more common to measure it as closure stress, by performing pressure testing of wells in the field. Closure stress is considered equal to, or a good approximation of the minimum in-situ stress for most cases. The analytical methods applied to such pressure testing include the square root of time plot, G function plot and the G-dP/dG plot. These plots require the engineer to fit tangent lines to the data, …

Computational Fluid Dynamics Flow Comparison Between Openhole Sleeve And Plug-And-Perf Completion In A Hydraulic Fractured Horizontal Well, Viriyah Theppornprapakorn

Masters Theses

"Multi-stage hydraulic fracture completions in horizontal wells have facilitated economic development of natural gas from unconventional and tight gas reservoirs.Industry has relied on two horizontal multi-stage completion technologies: cemented and perforated liner or Plug-and-perf method and Openhole Sleeve Multi-stage method. Each method has its own advantages and disadvantages. However, one of the most important questions is which method yields better gas production? Computation fluid dynamics (CFD) is a powerful tool for solving complex fluid flow problems. In well completion design, CFD plays a significant role aiding the completion engineers on making decision on well completion methods. In this study, a …

Tannic Acid Coated Gold Nanorods Demonstrate A Distinctive Form Of Endosomal Uptake And Unique Distribution Within Cells, Emily A. Untener, Kristen K. Comfort, Elizabeth I. Maurer, Christin M. Grabinski, Donald A. Comfort, Saber M. Hussain

Chemical and Materials Engineering Faculty Publications

One of the primary challenges associated with nanoparticle-dependent biological applications is that endosomal entrapment in a physiological environment severely limits the desired targeting and functionality of the nanoconstructs. This study sought to overcome that challenge through a systematic approach of gold nanorod (GNR) functionalization: evaluating the influence of both aspect ratio and surface chemistry on targeted cellular internalization rates and preservation of particle integrity. Owing to their unique spectral properties and enhanced surface area, GNRs possess great potential for the advancement of nanobased delivery and imaging applications. However, their ability for efficient intracellular delivery while maintaining their specific physiochemical parameters …

An Experimental And Computational Investigation Of Rotating Flexible Shaft System Dynamics In Rotary Drilling Assemblies For Down Hole Drilling Vibration Mitigation, Richard Duff

LSU Doctoral Dissertations

Rotary drilling system vibration has long been associated with damaging the bit, the bottom hole assembly (BHA) and drill string. Vibration has been traditionally measured in the bottom hole assembly, and been closely associated with the resonant behaviors.

This research study proposes an improved physical laboratory model to explore the dynamic behaviors associated with vibration. This model includes contact with the borehole wall allowing a range of stabilization geometries while removing bit-formation interaction effects. The results of exercising the model help develop new insights into both vibration measurement diagnostics and mitigation strategy execution.

Presented here is a review of other …

Evaluation Of Gas-Assisted Gravity Drainage Eor Process Applicability In A Louisiana Oil Field Through Experiments And Reservoir Simulation, Wagirin Ruiz Paidin

LSU Doctoral Dissertations

The Gas-Assisted Gravity Drainage (GAGD) process was developed as an alternative to conventional gas injection enhanced oil recovery (EOR) processes, which suffer from their inherent weakness of combating gravity segregation. The GAGD process, however, is aimed at taking advantage of this phenomenon and consists of using horizontal producers near the bottom of the payzone while injecting gas using vertical injection wells. It is hypothesized that the injected gas will rise to the top, thereby forming a gas cap while displacing reservoir brine/oil downward towards the producers. In this study, a single-well alternative to the multi-well GAGD process was investigated to …

A Large Scale Network Model To Obtain Interwell Formation Characteristics, Seyedmohammadamin Gherabati

LSU Doctoral Dissertations

Limited data availability and poor data quality make it difficult to characterize many reservoirs. For reservoirs that have undergone waterflooding, production and injection data are a reliable source of information from which injector-to-producer connections can be inferred. In this research, we use well locations, injection and production rate data and well fractional flow values to develop a reservoir-scale network model. A Voronoi mesh divides the reservoir into a number of node volumes each of which contains a well. Bonds connect each of the nodes with conductance values that must be inferred from the rate data. An inverse problem is formulated …

Experimental And Modeling Study Of Foam Flow In Pipes With Two Foam-Flow Regimes, Ali Reza Edrisi

LSU Doctoral Dissertations

The use of foams can be found abundantly in many applications in a wide range of industries, including oil and gas industry. Although understanding foam flow behavior is crucial for the optimization of such applications, the complex flow behavior of foams has been a major challenge. Recent experimental studies with surfactant foams presented a new way to characterize foam flow characteristics by using two flow regimes: the low-quality regime showing either plug-flow or segregated-flow pattern, and the high-quality regime showing slug-flow pattern. This study consists of three main components: (1) experimental investigation of foam rheology in pipes; (2) building up …

Coupled Geomechanical Reservoir Simulation, Amin Amirlatifi

Doctoral Dissertations

"Founded by Department Of Energy, the Plains CO₂ Reduction (PCOR) Partnership is investigating the Williston Basin as a candidate for sequestering CO₂ emissions from power plants. The State of Missouri, a member of PCOR, lies at the outermost point on the proposed transportation route and consequently faces the highest CO₂ compression and transportation costs. In order to minimize the cost of CO₂ sequestration, it is desirable to find a storage site within the state. The Lamotte sandstone is identified as a suitable sequestration aquifer formation in Missouri with acceptable permeability, porosity, extension, rock strength and water salinity. Using the finite …

Establishing Well Operability Limits For Frac Pack Sandface Well Completions Using A Screen Erosion Model And Well Completion Score Card, Rickey Hendrix

Doctoral Dissertations

"Completion quality has a direct impact upon the maximum production rate at which a frac pack well should be operated. Best practices for frac pack well completions ensure the highest possible quality for the well completion. A novel frac pack well completion score card was developed based on best practices for frac pack well completions identified through consultation with industry experts. The score card systematically combines and assesses completions data readily available standard completion reports. The outcome of the score card process is a numerical completion quality rating, which combines all well design and frac pack operations information.

The completion …

Preparation Of Cobalt/Nickel Molybdenum Sulfide Catalysts Supported By Aqueous Media Soluble Multi-Wall Carbon Nanotubes., Hassan Ahmad Bleibel

Open Access Theses & Dissertations

Multi-walled carbon nanotubes (MWCNTs) have been subjected to chemical treatment in order to introduce hydrophilic functional groups on their surfaces. These covalently bonded groups did enhance the solubility of MWCNTs in aqueous media as expected. Functionalized MWCNTs were characterized using FTIR, Raman spectroscopy, TGA, X-ray diffraction, dispersion test and TEM. Then, functionalized MWCNTs were incorporated in the hydrothermal synthesis method of transition metal sulfide catalysts (CoMo, NiMo, and Ethylenediamine-CoMo Sulfides). Catalysts were characterized using X-ray diffraction, TEM, SEM, N2 Gas adsorption-desorption, elemental analysis, and Hydrodesulfurization (HDS) reaction of dibenzothiophene (DBT). The objective was to study the functionalized MWCNTs' effect; being …

Thermal, Compositional, And Salinity Effects On Wettability And Oil Recovery In A Dolomite Reservoir, Azadeh Kafili Kasmaei

LSU Master's Theses

Low salinity and composition effects in improving oil recovery in sandstone reservoirs are known. However, these effects have not been thoroughly studied for the carbonate reservoirs. Because of the lack of the clay minerals in the carbonate rocks, the mechanisms for the improved oil recovery with low salinity, brine composition, and temperature may not be the same as those for sandstones. This experimental study attempts to investigate the effects of low salinity, brine composition, and temperature on wettability and oil recovery in a dolomite reservoir. Also, it is attempted to confirm that wettability alteration is the main mechanism for improvement …

Discrete Phase Simulations Of Drilled Cuttings Transport Process In Highly Deviated Wells, Doguhan Yilmaz

LSU Master's Theses

Transporting drilled cuttings from the bottomhole to the surface becomes more difficult and problematic in highly deviated wells than in vertical wells. Cuttings tend to settle down on the low side of the annulus typically in the form of a bed which can cause further problems. The height of this bed depends on many parameters such as annular domain geometry, drilling fluid density and rheology, annular flow rate, drill pipe rotation speed, cuttings size, shape, and their density. Prediction of the stationary cuttings bed height with respect to these aforementioned parameters is thus necessary to optimize the range of the …

The Diagnosis Of Well Control Complications During Managed Pressure Drilling, Brian Piccolo

LSU Master's Theses

The constant bottom-hole pressure method of managed pressure drilling is generally expected to reduce well control risks and apply well understood concepts when a kick is taken. Nevertheless, complications, such as operator error, leaks, plugging, equipment failures, and exceeding kick tolerance, can occur during kick circulation. By not properly interpreting the symptoms of a complication, a driller risks the consequences of additional influx, lost circulation or the simultaneous occurrence of both. To address the challenge of diagnosing complications, the implied pit gain (IPG) method is being evaluated as an enhancement to established industry practices. Traditional diagnostic methods attempt to match …