Chemical Engineering Commons^™

Optimation Model Of Planning Investment Dockyard With Approach Multi Objective Goal Programming, Ali Azhar

Makara Journal of Technology

Optimation model of planning investment dockyard with approach multi objective goal programming. The purpose of this research is to determine decision variable, goal function, alternative priority and achievement function in investment planning. From this optimation component, the model of ship yard investment planning could be achieved. The model of developed model in this research was the optimation of ship yard investment planning using multi objective goal programming approach. The model consist of 5 decision variable, 11 goal function, 2 alternative priority and 11 achievement functions. The model implementation was done toward PT ASSI investment planning. The calculation using from Quantitative …

Self-Ignition Properties Of Peat, Palm Shell Fibre And Woods, Yulianto Sulistyo Nugroho

Makara Journal of Technology

Self-ignition properties of peat, palm shell fibre and woods. Forest fire is one of the greatest environmental problems faced by Indonesia. Forest fires have destroyed million hectares of forest and land which cause economic loss, social problems including smoke related diseases and environmental disaster with long time consequences. The exothermic reactions of forest fuels that lead to fire can be initiated by a piloted flame and low-temperature oxidation mechanism. This paper presents the results of low temperature oxidation studies using forests fuel samples i.e. palm shell fibre, peat, woods and low-rank coal. The measured values of the critical oven temperatures …

The Use Of 2d Plastic Grating For Surface Profile And Dimension Manufacture Product Measurements By Using Ndt Moiré Technique, Retno Wigajatri P., Dini Andiani

Makara Journal of Technology

The Use of 2D Plastic Grating for Surface Profile and Dimension Manufacture Product Measurements by Using NDT Moiré Technique. Research of measuring the shape and dimension of object using the moiré technique have been done. Measurement have been made by observing the moiré space as a result of interaction between grating and its shadow casted on the object’s surface caused by the projector lamp with CCD camera. The acquired data was further processed by way of off-line. By successive phase shifts that is π/2, π dan 3π/2 towards the table tennis ball at the distance of 48 cm from the …

The Effects Of Corrosive Chemicals On Corrosion Rate Of Steel Reinforcement Bars: I. Swamp Water, Sulistyoweni Widanarko, Henki W. Ashadi, Andri Krisnadi Wicaksono

Makara Journal of Technology

Most of infrastructures using steel concrete to reinforce the strength of concrete. Steel concrete is so vulnerable to chemical compounds that can cause corrosion. It can happen due to the presence of chemical compounds in acid environment in low pH level. These chemical compounds are SO4 2-, Cl-, NO3 -. There are many swamp area in Indonesia. The acid contents and the concentration of ion sulphate, chlorides, and nitrate are higher in the swamp water than in the ground water .The objective of this research was to find out the influence of corrosive chemicals in the swamp water to the …

The Effects Of Corrosive Chemicals On Corrosion Rate Of Steel Reinforcement Bars: Ii. Swamp Sludges, Henki W. Ashadi, Sulistyoweni Widanarko, Irma Gusniani

Makara Journal of Technology

A polluted environment will influence the building age. The objective of this research was to find out the influence of corrosive chemicals within the sludge swamp area with the corrosion rate of steel concrete. Corrosion in steel concrete usually occur in acid area which contain of SO4 2-, Cl- and NO3 -. The research treatment used by emerging ST 37 and ST 60 within 60 days in ‘polluted’ sludge swamp area. Three variation of ‘polluted’ swamp sludge were made by increasing the concentration a corrosive unsure up to 1X, 5X and 10X. The corrosion rate measured by using an Immersion …

The Effect Of Ca Content On Cao-Zeolite On Nitrogen Adsorption Capacity, Mohammad Nasikin, Tania Surya Utami, Agustina Tp Siahaan

Makara Journal of Technology

In industry, Ca zeolite is used as nitrogen selective adsorbent with the use of PSA (Pressure Swing Adsorption)/VSA (Vacuum Swing Adsorption) methods. Natural zeolite modified to be Cao-zeolite by ion exchange process using Ca(OH)2. Adsorption test was done on CaO-zeolite with different Ca concentration to understand how it’s adsorption phenomena on oxygen and nitrogen. Adsorption test has been done for CaO-zeolite with Ca concentration = 0,682%, 0,849% and 1,244% to oxygen and nitrogen with equal concentration seperately. Pressure variation has being done three times (5 minutes long each time) adsorption time to analyze the connection between adsorption time and how …

Cetane Number Booster Additive For Diesel Fuel Synthesized From Coconut Oil, Mohammad Nasikin, Rita Arbianti, Abdul Azis

Makara Journal of Technology

To reduce NOx, SOx, HC, and particulates that produce because of using diesel fuel, can be done by increasing cetane number. One of methods is adding an additive to diesel fuel. 2-Ethyl Hexyl Nitrate (2-EHN) is a commercial additive that an organic nitrate. Making an additive in this research is used palm oil by nitration reaction that used HNO3 and H2SO4. Result of this reaction is methyl ester nitrate that has a structure looks like 2-EHN. IR spectra from research show that methyl ester nitrate is indicated by spectrum NO2 at 1635 cm-1. This result show that methyl ester nitrate …

Analogy Method Development For Cost Estimation Of Software Design, Riyanarto Sarno, Joko Lianto Buliali, Siti Maimunah

Makara Journal of Technology

The important aspect of planning and managing software development project is to estimate the cost of a project. There are several methods for estimating the cost of a software development project, and the Analogy method is a method which gives relatively better estimates. This paper shows that the modified Analogy method selects a closer project reference, estimates more accurate project effort and cost. This study enhances the cost estimate technique by including valid and complete cost parameters, therefore the estimate of a project cost is better than the result of the standard Analogy method.

The Role Of Si3n4 Amorphous Phase In Nc-Tin/A-Si3n4 Nanocomposites In Increases The Hardness And Thermal Stability, Keba Moto

Makara Journal of Technology

The role of Si3N4 amorphous phase in nc-TiN/a-Si3N4 nanocomposites will be shown and compared with polycrystalline ZrN/Ni which has no such amorphous phase (non-composites). The presence of amorphous phase Si3N4 increases the hardness of film as well as the toughness of the bulk nanocomposites under indentation load. It has been observed that nc-TiN/a-Si3N4 nanocomposites films has higher thermal stability than ZrN/Ni polycrystalline films.

Biodiesel's Characteristics Preparation From Palm Oil, Tilani Hamid. S, Rachman Yusuf

Makara Journal of Technology

Biodiesel’s characteristics preparation from palm oil. Using vegetable oils directly as an alternative diesel fuel has presented engine problems. The problems have been attributed to high viscosity of vegetable oil that causes the poor atomization of fuel in the injector system and pruduces uncomplete combustion. Therefore, it is necessary to convert the vegetable oil into ester (metil ester) by tranesterification process to decrease its viscosity. In this research has made biodiesel by reaction of palm oil and methanol using lye (NaOH) as catalyst with operation conditions: constant temperature at 60 oC in atmosferic pressure, palm oil : methanol volume ratio …

Development Of Hardness Measurement Procedure For Nanocomposite Nc-Tin/A-Si3n4, Keba Moto

Makara Journal of Technology

Hardness of nc-TiN/a-Si3N4 nanocomposites which was determined by using two methods of measurements i. e. depth sensing method and remaining plastic indentation area that were magnified by using SEM (Scanning Electron Microscope) lie in the good agreement. The hardness value is not influenced by the biaxial and residual compressive stress. The measurement of the biaxial stress on the substrate shows a very small value of biaxial stress as well as the constant hardness and crystallite size against annealing temperature. Therefore, the reported hardness value here is the intrinsic value that depend on its microstructure properties.

Integrating Passenger And Modulo As Learning Tools For Collaborative Engineering Education, Kalamullah Ramli, Frank Schwarz, Stefan Werner, A Halim Shamsuddin, Axel Hunger

Makara Journal of Technology

The University of Indonesia (UI), Gerhard Mercator University (GMU), the Universiti Kebangsaan Malaysia (UKM) have agreed to cooperate as partners to develop a joint bachelor (3+1) and masters (1+1) degree, and collaborate in the research fi elds of multimedia- and internet-based learning and application level active networks. This paper describes the introduction of the Offshore Project and the extending of information technology applications to the partner institutions in this international cooperation which would very much enhance the operations of the new initiative in engineering education, which could provide students in far distance with more fl exible learning environment.

Study Effect Of Salt Washing Process On Content And Iodium Stability Of Salt, Nelson Saksono

Makara Journal of Technology

Effect of Salt Washing Process on Content and Iodium Stability of Salt. Salt washing process should increase the salt quality. It should clean the salt from sludge or clay and also reduce the impurity compound such as Mg, Ca and the reductor content. The objective of these reseach is to assess the effect of washing process on the content og hygroscopic impurities compound (Ca and Mg), and reductor content of salt. The research also investigate the water absorbing, pH, KIO3 content as function of time to obtain effect of washing process on KIO3 stability in salt. The experiment result shows …

Object Classfification In Computer Vision With Discriminant Analysis, Amir Hamzahan

Makara Journal of Technology

A robotic sensor system is always supported by a computer system called ‘computer vision’. The important concept of computer vision is object classfifi cation. In this study two algorithms for object classifi cation in this system will be compared. Firstly, A simple method that do not need complex computation and that considered as an informal method is called binary tree decision structure. This method is based on modest caracteristic decriptors of an object such as vertical line, horizontal line or ellipse line. Unfortunately this method has weakness in recognize an image that contaminated by a noise. Secondly, a more formal …

Making Alloys (Ti1 - Xalx) N Using Plasma Cvd Technique From Alcl3 Powder, H2 And N2 Gas ,With Solvent Ticl4, Keba Moto

Makara Journal of Technology

The substitution of Ti atoms by Al atoms in TiN lattice sites to form (Ti1-xAlx)N is clearly demonstrated by the coatings which were deposited on steel substrate and using plasma CVD technique. The presence of Al atoms in TiN lattice site is shown by means of XRD and EDX techniques: lattice parameters decreasing of TiN as the fraction of Al increases (XRD) and precipitation of hexagonal AlN phase (XRD) as the fraction of Al exceeding 0.8 (EDX). The hardness of these coating are just around 30 GPa, which is beyond the values reported in literatures.

Effects Of 0.25 % Mo (Molybdenum) Which Is Contained In The Ductile Cast Iron On Mechanical Properties Of Austempered Ductile Iron (Adi)., Nukman Nukman, Bustanul Arifin, Bambang Sugiarto

Makara Journal of Technology

The aim of this research is to investigate the effects of 0.25 % Mo (Molybdenum) which is contained in the ductile cast iron on mechanical properties of Austempered Ductile Iron (ADI). The various temperatures and the holding times are used in the heat treatment processes. Using a given 0.25 % Mo in the ductile iron, ADI's alloyed developes a higher ultimate tensile stress value and decreases the elongation if we compare with the as cast (non alloy ductile iron). The higher impact energy value obtained at 9000 C austenization and 375o C austempering temperatures during 60 minutes holding times. The …

The Manufacturing Properties Of Galvanised Steel Sheet With Hexagonal And Tetragonal Network Of Circle Holes, Rahmat Saptono

Makara Journal of Technology

Galvanized steel sheet of 0.8 mm in thickness was drilled with circle holes of 2.5 mm diameter and spacing arranged in tetragonal and hexagonal pattern. The manufacturing properties of specimen were studied through drawing and stretching simulative test. It was concluded from the results that, at high ratio of punch to hole diameter (40/2.5), the drawing properties (LDR) of both square and hexagonal perforated sheet were slightly lower than that of solid sheet, while hexagonal perforated showing LDR somewhat higher than the square one. The stretching properties (LDH) of sheet, however, were much lower than that of solid sheet while …

Develops The Software Of Dsp Processor For The Cdma Circuitry, Arman Djohan D.

Makara Journal of Technology

This research develops the software of DSP Processor type TMS320C54X for the CDMA circuitry. This research apply two algorithms namely Mathematic Algorithm and table lookup Algorithm. From both algorithms, the research examine what algorithm have the fasted processing time and the smallest memory occupation. From the examination results the Mathematic Algorithm have 20.62 milliseconds processing time and the Table lookup algorithm have 14.08 milliseconds processing time. The Table lookup algorithm have the fastest processing time because the Matematic algorithm need the rounding process of the fi gure. Eventhough such processing time is not exceed from the 125 millisecond of delay …

Studies On Use Of Carbon Slurry, A Waste From Fertilizer Plant, In Treatment Of Waste Water, Sanjay Tewari

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

"Non biodegradable materials like heavy metals, refractory organics are not removed during the conventional treatment process. In order to meet the regulatory standards and for safe disposal, it is necessary to go for tertiary treatment. Various tertiary treatment methods include adsorption, membrane separation process, ultra filtration, reverse osmosis etc. Adsorption has been found to be efficient for the removal of most of heavy metals in waste water at lower concentrations. Activated carbon is commonly used adsorbents, however, due to its high cost and loss in regeneration, various low cost adsorbents have been investigated during recent years.

The aim of the …

Biological Reduction Of Perchlorate In Ion Exchange Regenerant Solutions Containing High Salinity And Ammonium Levels, Tina M. Gingras, Jacimaria R. Batista

Civil and Environmental Engineering and Construction Faculty Research

The most promising technologies to remove perchlorate from water are ion exchange and biological reduction. Although successful, ion exchange only separates perchlorate from water; it does not eliminate it from the environment. The waste streams from these systems contain the caustic or saline regenerant solutions used in the process as well as high levels of perchlorate. Biological reduction could be used to treat the regenerant waste solutions from the ion exchange process. A treatment scheme, combining ion exchange and biodegradation, is proposed to completely remove perchlorate from the environment. Perchlorate-laden resins generate brines containing salt concentrations up to 6% or …

Comparative Performance Of Wastewater Treatment Plants In Three Rubber Glove Manufacturing Plants, Lee Kuan Loh

Student Works (2000-2009)

During the manufacturing of rubber gloves, water is used as wash water at different stages to clean the rubber gloves, thus generating quite a substantial amount of effluent. There are four main sources of effluent. i.e. a) from the glove formers cleaning tank, which collects the acidified water used to clean these formers, b) latex dipping tank, where it collects wash water used to cool the tank during dipping process and the sludge form the tank itself, c) leaching tank, where it collects wash water used to leach out the pollutants from the gloves and lastly d) latex compounding, containing …

Waste Management In Palm-Oleo Sdn. Bhd, Ramesh Ramasamy

Student Works (2000-2009)

Oleochemical industry in Malaysia has been diversifying significantly due to the availability of raw materials (palm oil) and the high demand for downstream products such as fatty acids, fatty alcohols and glycerine. The growth of oleochemical industries is further enhanced by fluctuations io petroleum price and regular animal diseases, which made tallow-based fats unreliable. Environmental awareness is growing rapidly in Malaysia. There is growing realization of the need to balance industrial and economic development with environmental preservation and protection, as well as, with efficient use of energy sources in order to achieve sustainable development. Extensive waste management studies were focused …

Simulation Of Temperature And Stress Fields During Rcc Dam Construction, Ronaldo Luna, Yongfu Wu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The worldwide experience in the construction of roller-compacted concrete (RCC) dams together with the use of numerical solutions, allows the simulation of different scenarios in a computer. It is well documented that thermal control is one of the most important problems for RCC dam construction. The dam temperature changes due to the heat produced by the internal hydration of concrete and the environmental boundary conditions influencing the elastic modulus and creep properties of concrete. The construction process was simulated to study how the temperature and stress change during dam construction. The numerical methodology considers the effect of temperature on the …

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …

Production Of Fermentable Sugars From Waterhyacinth By High-Temperature Dilute-Acid Hydrolysis Method, J. H. Y. Katima

Tanzania Journal of Engineering and Technology (TJET)

A study on acid-catalyzed hydrolysis of Waterhyacinth (WH) biomass for production of monomeric sugars has been done. Waterhyacinth (Eichhornia Crassipes) plants were obtained from Lake Victoria. A yield of 18.5% w/w fermentable sugars was achieved during hydrolysis of oven-dried Waterhyacinth (ODWH) biomass at 220°C and 1.5% w/w H₂SO₄ acid. The waterhyacinth (WH) hydrolysates obtained from a high-temperature dilute-acid hydrolysis were rich in six-carbon (C₆) sugars (glucose) which could be fermented to ethanol. The production of fermentable sugars from waterhyacinth biomass is a promising new opportunity for its economic value which can in turn accelerate its rate of harvest and utilization.

Use Of Dissolved Oxygen Concentration Probes In Biological Wastewater Treatment Plants, S Manyele

Tanzania Journal of Engineering and Technology (TJET)

A study on use Of dissolved oxygen probes (DOP) for measurement Of oxygen concentration in warer and wastewater treatment is presented. The principles Of operation, design considerations and selection criteria for Two types of probes, viz. galvanic and polarographic, are discussed Use of polarographic probes in n rhree-phase fluidized bed bioreactor and in laboratory experiments is presented and discussed. The effect of airflow rate and treatment time on dissolved oxygen concentration was found to be significant. It was found that polarographic probes are important equipment in determining the pollution of the industrial effluents. Finally, the use of the DOC probes …

Assessment Of Environmental Implications Of Abandoned Oil And Gas Wells, Donald L. Warner, Cary L. Mcconnell

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

A detailed study was made of the potential for abandoned oil and gas wells in the Lower Tuscaloosa sand of Mississippi and Louisiana to act as conduits for movement of saline water from the Lower Tuscaloosa into underground sources of drinking water (USDW's). Finite-difference numerical modeling determined the extent that water might be forced from the Lower Tuscaloosa sand into a USDW as a result of injection into the Lower Tuscaloosa. Within the range of conditions modeled, water from the Lower Tuscaloosa never traveled into a USDW. On the basis of the modeling, we concluded that it is unlikely that …

Winery Waste Utilization-A Case Study Of Dowico, J. H.Y. Katima

Tanzania Journal of Engineering and Technology (TJET)

The Dodoma Winery Company (DOWICO), is presently processing about 1000 tonnes of grapes to produce different types of wines, with left overs of about 200 as wastes. These wastes are dumped outside the factory, obviously, a poor method of waste disposition as far as the environmental significance is concerned. Since the expansion programme, to enable the plant to handle up to 30000 tonnes of grapes per year is in the pipeline the best method of disposing the huge amount of waste (about 6000 tonnes) that will result, has to be sought.

This paper highlights the financial and sanitary advantage of …

A Field Perspective On Groundwater Contamination, John A. Cherry

Maine Collection

A Field Perspective on Groundwater Contamination

Geological Society of Maine Distinguished Lecturer John Cherry, University of Waterloo, Ontario, sponsored by the Department of Geosciences, University of Southern Maine, 19th May 1988.

Contents: Lecture 1 : Contaminant Migration Processes Illustrated by Field Experiments / Lecture 2 : Behavior of Dense Non-Aqueous Phase Liquids, Illustrated by Lab Experiments and Conceptual Examples / Lecture 3 : Field Case Histories on Groundwater Contamination / Lecture 4 : Hydrogeological Concepts and Criteria for Waste Disposal / Waterloo Center for Groundwater Research Publications List

Geotechnical Evaluation Of The Support Of Coal Pillars In Underground Coal Mines., John D. Rockaway, Richard W. Stephenson

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Study Described Was Accomplished through an Investigation of Both the Intact and Insitu Geotechnical Properties of the Sub coal Strata and through the Installation of Floor Movement Monitoring Instrumentation. the Method of Bearing Capacity Analysis Developed by A. S. Vesic Was Used to Define Pillar Stability. This Method Includes Provisions for Taking into Consideration a Two-Layer System Such as Assumed for Mine Conditions Where a Weak Underclay overlies Firmer Strata.