Chemical Engineering Commons^™

Mineralization Potential Of Electrospun Pdo-Hydroxyapatite-Fibrinogen Blended Scaffolds, Isaac A. Rodriguez, Parthasarathy A. Madurantakam, Jennifer M. Mccool, Scott A. Sell, Hu Yang, Peter C. Moon, Gary L. Bowlin

Chemical and Biochemical Engineering Faculty Research & Creative Works

The current bone autograft procedure for cleft palate repair presents several disadvantages such as limited availability, additional invasive surgery, and donor site morbidity. The present preliminary study evaluates the mineralization potential of electrospun polydioxanone:nano-hydroxyapatite: fibrinogen (PDO: nHA: Fg) blended scaffolds in different simulated body fluids (SBF). Scaffolds were fabricated by blending PDO: nHA: Fg in the following percent by weight ratios: 100: 0: 0, 50: 25: 25, 50: 50: 0, 50: 0: 50, 0: 0: 100, and 0: 50: 50. Samples were immersed in (conventional (c), revised (r), ionic (i), and modified (m)) SBF for 5 and 14 days to …

Experimental Composite Guidance Conduits For Peripheral Nerve Repair: An Evaluation Of Ion Release, X. F. Zhang, A. Coughlan, H. O'Shea, Mark R. Towler, S. Kehoe, D. Boyd

Chemical and Biochemical Engineering Faculty Research & Creative Works

Poly (lactide-co-glycolide) (PLGA) - Pluronic F127 - glass composites have demonstrated excellent potential, from the perspective of controlled mechanical properties and cytocompatibility, for peripheral nerve regeneration. In addition to controlling the mechanical properties and cytotoxicity for such composite devices, the glass component may mediate specific responses upon implantation via degradation in the physiological environment and release of constituent elements. However, research focused on quantifying the release levels of such therapeutic ions from these experimental medical devices has been limited. To redress the balance, this paper explores the ion release profiles for Si⁴⁺, Ca²⁺, Na⁺, …

Gallium Containing Glass Polyalkenoate Anti-Cancerous Bone Cements: Glass Characterization And Physical Properties, A. W. Wren, A. Coughlan, L. Placek, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

A gallium (Ga) glass series (0.48SiO₂-0.40ZnO-0.12CaO, with 0.08 mol% substitution for ZnO) was developed to formulate a Ga-containing Glass Polyalkenoate Cement (GPC) series. Network connectivity (NC) and X-ray Photoelectron Spectroscopy (XPS) was employed to investigate the role of Ga³⁺ in the glass, where it is assumed to act as a network modifier. Ga-GPC series was formulated with E9 and E11 polyacrylic acid (PAA) at 50, 55 and 60 wt% additions. E11 working times (T_w) ranged from 68 to 96 s (Lcon.) and 106 s for the Ga-GPCs (LGa-1 and LGa-2). Setting times (T_s) …

Examination Of The Migratory Potential Of Patterned Cortical Neurons Using Laser Direct-Write, T. B. Phamduy, C. J. Rivet, D. Kingsley, R. J. Gilbert, D. B. Chrisey

Chemical and Biochemical Engineering Faculty Research & Creative Works

We describe the patterning of neuronal cultures by a laser-based printing system. Embryonic chick cortical neurons were transferred into predetermined array positions with micron accuracy, enabling detailed study of neuronal migration, aggregation, and neurite outgrowth regulated by cell-cell interactions on a homogeneous surface. Images of cells were analyzed up to 14 days. Results demonstrated that increasing the spacing between neighboring groups of cells causes intra-group cells to preferentially migrate towards each other and aggregate towards the center of the printed 'spot'. In addition, increasing the printed 'spot' size encouraged migration towards neighboring groups of cells. © 2012 IEEE.

The Structural Characterization Of Ga 2o 3-Na 2o-Cao-Zno-Sio 2 Bioactive Glasses, T. J. Keenan, A. W. Wren, A. Coughlan, M. M. Hall, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

The characterization of bioactive glasses in which zinc (Zn) has been incrementally replaced by gallium (Ga). © 2012 IEEE.

Silver Coated Bioactive Glass Particles For Wound Healing Applications, P. Hassanzadeh, A. W. Wren, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Hench and colleagues discovered that bone could bond chemically to certain glass compositions in 1969 [1]. This group of glasses is known as bioactive glasses [1]. Some special compositions of bioactive glasses will bond to soft tissues as well as bone [1]. One of the important characteristics of bioactive glasses is their ability to release beneficial ions such as Ca²⁺, Na⁺, Zn²⁺, Sr²⁺, and PO 43- in the body, which promote self-healing [2]. Bioactive glasses generally contain much less glass former (e.g., SiO₂, B₂O₃ etc.) than conventional …

Increasing The Quantity Of Silver In Zinc-Based Glass Polyalkenoate Cement: Is There An Improvement In Antibacterial Efficacy?, A. Coughlan, S. M. Breed, C. Ashraf, J. A. Cardinale, M. M. Hall, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Bone cements should have the ability to chemically bond to both bone and surgical metals, exhibit no chemical or thermal necrosis, and have no significant shrinkage or exotherm upon setting. Taking these properties into consideration, glass polyalkenoate cements (GPCs) have potential as bone cements. GPCs are formed by the reaction between an ion-leachable glass and an aqueous solution of polyacrylic acid (PAA) [1] and have proven antibacterial and cariostatic properties [2], which are related to their ability to release beneficial amounts of ions over time [3, 4]. The GPCs can be formulated to release ions that can have a therapeutic …

Gallium Containing Glass Polyalkenoate Bone Cements: Glass Characterization And Physical Properties, L. Placek, A. W. Wren, A. Coughlan, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Gallium (Ga) glasses were developed to formulate a Glass Polyalkenoate Cement (GPC) series with both E9 and E11 polyacrylic acid (PAA) at 50, 55 and 60wt% additions. Working times (T w), setting times (T s), compression (σ c), and biaxial flexural (σ f) strength testing were evaluated to determine the GPCs potential use in orthopedics. © 2012 IEEE.

Novel Platform Development Using An Assembly Of Carbon Nanotube, Nanogold And Immobilized Rna Capture Element Towards Rapid, Selective Sensing Of Bacteria, Elizabeth I. Maurer, Kristen K. Comfort, Saber M. Hussain, John J. Schlager, Sharmila M. Mukhopadhyay

Chemical and Materials Engineering Faculty Publications

This study examines the creation of a nano-featured biosensor platform designed for the rapid and selective detection of the bacterium Escherichia coli. The foundation of this sensor is carbon nanotubes decorated with gold nanoparticles that are modified with a specific, surface adherent ribonucleic acid (RNA) sequence element. The multi-step sensor assembly was accomplished by growing carbon nanotubes on a graphite substrate, the direct synthesis of gold nanoparticles on the nanotube surface, and the attachment of thiolated RNA to the bound nanoparticles.

The application of the compounded nanomaterials for sensor development has the distinct advantage of retaining the electrical behavior …

Silver Coated Bioactive Glass Particles For Wound Healing Applications, A. W. Wren, A. Coughlan, P. Hassanzadeh, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Bioactive glass particles (0.42SiO₂-0.15CaO-0.23Na ₂O-0.20ZnO) of varying size (<90 >μm and 425-850 μm) were synthesized and coated with silver (Ag) to produce Ag coated particles (PAg). These were compared against the uncoated analogous particles (Pcon.). Surface area analysis determined that Ag coating of the glass particles resulted in increased the surface area from 2.90 to 9.12 m²/g (90 μm) and 1.09-7.71 m²/g (425-850 μm). Scanning electron microscopy determined that the Ag coating remained at the surface and there was little diffusion through the bulk. Antibacterial (Escherichia coli - 13 mm and Staphylococcus epidermidis …

Altering Iron Oxide Nanoparticle Surface Properties Induce Cortical Neuron Cytotoxicity, Christopher J. Rivet, Yuan Yuan, Diana Andra Borca-Tasciuc, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Superparamagnetic iron oxide nanoparticles, with diameters in the range of a few tens of nanometers, display the ability to cross the blood-brain barrier and are envisioned as diagnostic and therapeutic tools in neuro-medicine. However, despite the numerous applications being explored, insufficient information is available on their potential toxic effect on neurons. While iron oxide has been shown to pose a decreased risk of toxicity, surface functionalization, often employed for targeted delivery, can significantly alter the biological response. This aspect is addressed in the present study, which investigates the response of primary cortical neurons to iron oxide nanoparticles with coatings frequently …

Protein Based Biomimetic Approachs To Surface Hemocompatibility And Biocompatibility Enhancement, Matthew Thomas Dickerson

Theses and Dissertations--Chemical and Materials Engineering

T. pallidum can survive a primary immune response and continue growing in the host for an extended period of time. T. pallidum is thought to bind serum fibronectin (FN) through Tp0483 on the surface to obscure antigens. A Tp0483 fragment (rTp0483) was adsorbed onto functionalized self-assembled monolayers (SAMs) with FN. FN capture by adsorbed rTp0483 depended greatly on surface chemistry with COO- groups being best for FN binding. Hemocompatibility was determined by analysis of plasma protein adsorption, intrinsic pathway activation, and platelet activation. rTp0483+FN bound an equal or lesser amount of fibrinogen (Fg), human serum albumin (HSA), and factor XII …

Shape-Shifting Surfaces For Rapid Release And Direct Stamping Of Organized Micro-Tissues, Samuel James Dupont

USF Tampa Graduate Theses and Dissertations

The primary aim of the research in this study is to develop a robust and simple platform for the in vitro organization of cells on surfaces which facilitate rapid cell release and allows for the direct stamping of highly organized micro-tissues. Current approaches towards this goal have been very successful but are lengthy and subject cells to harsh conditions for extended periods of time raising questions regarding cell health and maintenance of physiological state. To address these concerns a platform was developed to allow for rapid cell release by utilizing a release mechanism different from previous work.

Micron-scale structures comprised …

Comparison Of Microwave And Conventionally Sintered Yttria-Doped Zirconia Ceramics, Colin J. Reidy, Thomas J. Fleming, Stuart Hampshire, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

This paper reports on improvement of the physical and mechanical properties of Y₂O₃-ZrO₂ ceramics through compositional optimization, the use of nanograined powders and utilization of microwave sintering. ZrO₂ with 2-5 mol% Y₂O₃, prepared from nanopowders, was sintered in both conventional and microwave furnaces under exactly the same heating schedule. It was found that microwave sintering improves physical and mechanical properties of Y₂O₃-ZrO₂ ceramics compared with conventional sintering. Compositions containing 2 mol% Y₂O₃ exhibit the greatest improvement due to retention of tetragonal ZrO …

Role Of Ammonia In The Activiation Of Methanol Dehydrogenase/Cytochrome C(L) Enzyme, Ancy Kunjumon

Doctoral Dissertations

Recent advancement in enzyme catalysis has opened ways to design efficient biocatalysts, bio-sensors and bio-fuel cells. An in-depth knowledge about the mechanism of the reaction taking place within the enzymes is of great importance to achieve these goals. In this dissertation, various computation methods are applied to investigate the mechanism behind enzyme catalysis in the presence of compounds called activators.

Methanol dehydrogenase (MDH) is a well-known bio-catalyst that can oxidize excess of methanol from the environment to formaldehyde. The enzyme works well within the bacterial environment, but under in vitro, it loses activity. Ammonia is used as an activator …

Robust Cns Regeneration After Complete Spinal Cord Transection Using Aligned Poly-L-Lactic Acid Microfibers, Andres Hurtado, Jared M. Cregg, Han B. Wang, Dane F. Wendell, Martin Oudega, Ryan J. Gilbert, John W. Mcdonald

Chemical and Biochemical Engineering Faculty Research & Creative Works

Following spinal cord injury, axons fail to regenerate without exogenous intervention. In this study we report that aligned microfiber-based grafts foster robust regeneration of vascularized CNS tissue. Film, random, and aligned microfiber-based conduits were grafted into a 3 mm thoracic rat spinal cord gap created by complete transection. Over the course of 4 weeks, microtopography presented by aligned or random poly- l-lactic acid microfibers facilitated infiltration of host tissue, and the initial 3 mm gap was closed by endogenous cell populations. This bulk tissue response was composed of regenerating axons accompanied by morphologically aligned astrocytes. Aligned fibers promoted long distance …

Glucose Biosensor Using Electrospun Mn2o3-Ag Nanofibers, Shan Huang

Master's Theses

The highly porous Mn₂O₃-Ag nanofibers were fabricated by a facile two-step procedure (electrospinning and calcination) and then employed as the immobilization matrix for glucose oxidase (GOD) to construct an amperometric glucose biosensor. A notable enhancement of direct electron transfer between GOD and the electrode is observed at the Mn₂O₃-Ag-GOD modified electrode with a fast electron transfer rate constant. The biosensor also shows fast response to glucose, high sensitivity (40.60 μA×mM^-1×cm^-2), low detection limit (1.73 µM at S/N=3), low K_m,app value and excellent selectivity. These results indicate that …

Sol-Gel Derived Silver-Incorporated Titania Thin Films On Glass: Bactericidal And Photocatalytic Activity, Betul Akkopru Akgun, Anthony W. Wren, Caner Durucan, Mark R. Towler, Nathan P. Mellott

Chemical and Biochemical Engineering Faculty Research & Creative Works

Titanium dioxide (TiO₂) and silver-containing TiO₂ (Ag-TiO₂) thin films were prepared on silica pre-coated float glass substrates by a sol-gel spin coating method. The bactericidal activity of the films was determined against Staphylococcus epidermidis under natural and ultraviolet (UV) illumination by four complementary methods; (1) the disk diffusion assay, (2) UV-induced bactericidal test, (3) qualitative Ag ion release in bacteria inoculated agar media and (4) surface topographical examination by laserscan profilometry. Photocatalytic activity of the films was measured through the degradation of stearic acid under UV, solar and visible light conditions. The chemical state and …

Clinical Risk Factors For Osteoporosis In Ireland And The Uk: A Comparison Of Frax And Qfracturescores, N. M. Cummins, E. K. Poku, Mark R. Towler, O. M. O'Driscoll, S. H. Ralston

Chemical and Biochemical Engineering Faculty Research & Creative Works

Recently two algorithms have become available to estimate the 10-year probability of fracture in patients suspected to have osteoporosis on the basis of clinical risk factors: the FRAX algorithm and QFractureScores algorithm (QFracture). The aim of this study was to compare the performance of these algorithms in a study of fracture patients and controls recruited from six centers in the United Kingdom and Ireland. A total of 246 postmenopausal women aged 50-85 years who had recently suffered a low-trauma fracture were enrolled and their characteristics were compared with 338 female controls who had never suffered a fracture. Femoral bone mineral …

Controlled Release Of 6-Aminonicotinamide From Aligned, Electrospun Fibers Alters Astrocyte Metabolism And Dorsal Root Ganglia Neurite Outgrowth, Nicholas J. Schaub, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Following central nervous system (CNS) injury, activated astrocytes form a glial scar that inhibits the migration of axons ultimately leading to regeneration failure. Biomaterials developed for CNS repair can provide local delivery of therapeutics and/or guidance mechanisms to encourage cell migration into damaged regions of the brain or spinal cord. Electro spun fibers are a promising type of biomaterial for CNS injury since these fibers can direct cellular and axonal migration while slowly delivering therapy to the injury site. In this study, it was hypothesized that inclusion of an anti-metabolite, 6-aminonicotinamide (6AN), within poly-l-lactic acid electro spun fibers could attenuate …

Detection Of Specific Biological Antigens Using Ac Electrochemical Impedance Spectroscopy, Darrel Angelo Mazzari

Dissertations (1934 -)

When certain antigens are present in our environment, a rapid, on-site, accurate, selective, and repeatable detection method can be invaluable in preventing illness or saving lives. Rapid detection of these antigens is important to avert spreading infections.

Currently, capturing a sample and sending it to a laboratory can take weeks to get results, which can be much too long. Conventional sensing methodologies include various electrical measurements as capacitive, potentiometric, piezoelectric, surface plasmon resonance (SPR), and quartz crystal microbalance (QCM). Of particular power and interest is Alternating Current (AC) Electrochemical Impedance Spectroscopy (EIS) which provides for the characterization of the electrical …

An Argument For The Importance Of Material Property Characterization Of Hydrogels, J. M. Zuidema, R. J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Hydrogels are being fabricated for use in many tissue engineering applications. In order to advance the field, material properties must be characterized to determine the most desirable attributes. The data presented shows the importance of both surface charge and mechanical properties on dorsal root ganglia neurite extension. © 2011 IEEE.

Aluminium-Free Glass Polyalkenoate Spinal Cements, A. W. Wren, N. M. Cummins, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Addition of Yitanium increased the Wt & St and the sf strength of these cements compared to the control (BT 101). © 2011 IEEE.

Fabrication And Characterization Of A Hydrogel Containing Electrospun Fibers, C. J. Rivet, R. J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Electro spun an fibers hydrogels are two focal points of research within the biomaterial's community. The electrospinning process allows for fabrication of nanoscale, aligned topography and has been shown to direct cellular migration and outgrowth. Hydrogels exhibit benefits over traditional, rigid scaffolds in that they are injectable and can be tailored to mimic the mechanical properties of the surrounding tissue. Although both electro spun fibers and hydrogels display favorable characteristics for biomedical applications in vitro, there in vivo benefits are limited due to inherent deficiencies Therefore, to advance the field of biomaterials research, a composite material containing electro spun fibers …

The Effect Of Adding Organic Polymers To Ca-Sr-Zn-Si Glass Polyalkenoate Cement, A. Coughlan, N. M. Cummins, A. W. Wren, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

To conclude, the addition of polymers to GPCs resulted in little change to the Tw and Ts, however the compressive strength was found to decrease slightly. ASAP tests revealed that the cements may undergo some structural changes as a result of these additions. In the future perhaps the addition of organic polymers suspended in the liquid phase as part of the cement may yield improved results in this type of study. © 2011 IEEE.

Fabrication And Analysis Of Variable Density Poly-(L)-Lactic Acid Fiber Scaffolds, N. W. Zaccor, C. J. Rivet, R. J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Poly-L-lactic acid (PLLA) is an extensively studied synthetic polymer that has demonstrated utility as a scaffolding material. A common technique for the fabrication of PLLA scaffolds is electrospinning. The purpose of the present material study was to assess whether an electrospinning process could produce consistent and uniform PLLA scaffold densities. An 8% PLLA solution was made using a 1:1 chloroform: dichloromethane solution and was then run through an electrospinning apparatus. Samples were spun onto 4% PLLA films for 2- or 20-min. Scanning electron microscopy (SEM) was used for imaging the scaffolds. A nine-measurement data set was used for the assessment …

Aligned, Electrospun Topography For Use With External Stimulus Systems, S. G. Quallich, C. J. Rivet, R. J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Variations in fiber density, diameter, and orientation can be used to direct cell migration and guide neurite growth. The characterization of electro spun fibers is essential prior to conducting further research that utilizes electro spun scaffolds to control the magnitude and direction of cell migration and neurite growth. The goal of this study is to create highly aligned, electro spun fibers on poly-L-lactic acid (PLLA) films in parallel and perpendicular orientations to the long axis of rectangular cover slips. Fibers were electro spun into scaffolds and scanning electron microscopy (SEM) was used to characterize fiber density and orientation. The construction …

Using Cerebrospinal Fluid For In Situ Fabrication Of Injectable Alginate Hydrogels For Spinal Cord Repair, C. A. Mckay, R. J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Severe mechanical trauma of the spinal cord induces a secondary injury response that contributes to post injury cell death and the formation of barriers inhibitory to neuronal regeneration. It is believed that engineered scaffolds produce favorable results when they mimic the properties of the t issue that they are aiming to replicate. Alginate hydrogels have been shown to be beneficial in a number of biomaterial applications and this study shows that alginate hydrogels formed in the presence of an artificial cerebrospinal fluid are able to form hydrogels with mechanical properties similar to those exhibited by neural tissue in the CNS. …

Decreasing The Gelation Time Of Fibrin Hydrogels, C. D. Johnson, J. Zudiema, R. J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Spinal cord injury (SCI) is a debilitating problem that often results in paraplegia or quadriplegia. Fibrin hydrogels can be injected into the injured cavity and fill the irregular space. Current techniques require 60 minutes to form a hydrogel. The purpose of this study was to design a fibrin biomaterial that would solidify at a faster rate. By augmenting the existing fabrication procedure, a novel biomaterial was created that formed in 5-7 minutes but lost much of its mechanical stability. Further studies will be performed to improve the mechanical properties while maintaining the faster rate of formation observed here. © 2011 …

Determining A Method For Rendering Low Cost Cdse(Zns) Core(Shell) Quantum Dots Aqueous Soluble Via Amphiphilic Polymer Wrapping, Patrick Mcbride

Materials Engineering

Herein is described the procedure of two amphiphilic polymer wrapping techniques that may be employed for obtaining aqueous soluble quantum dots (QDs) for use in biological fluorescent imaging applications. The advent of QDs has led to new nanoscale fluorescent materials that exhibit unparalleled quantum yields (QYs), high resistance to photobleaching, tunable emissions, and
absorption over a large optical range. However, the QD synthesis employed here at Cal Poly to obtain bright, photostable CdSe(ZnS) core(shell) QDs involves the use of organic solvents and surfactants, leading to hydrophobic QDs. Since all of biology relies on aqueous solubility, this hydrophobicity creates a major …