Chemical Engineering Commons^™

Characteristics Of Glass Ionomer Cements Composed Of Glass Powders In Cao-Sro-Zno-Sio2 System Prepared By Two Different Synthetic Routes, Ill Yong Kim, Chikara Ohtsuki, Aisling Coughlan, Lana Placek, Anthony W. Wren, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glass ionomer cements (GICs) are composed of an acid degradable glass, polyacrylic acid and water. Sol-gel processing to prepare the glass phase has certain advantages, such as the ability to employ lower synthesis temperatures than melt quenching and glasses that are reported to have higher purity. A previous study reported the effects of glass synthesis route on GIC fabrication. However, in that study, the sol-gel derived glass exhibited a reduced concentration of cations. This study investigates increasing the cation content of a sol-gel derived glass, 12CaO·4SrO·36ZnO·48SiO₂ (molar ratio) by heating before aging to reduce dissolution of cations. This glass …

Relating Ph And Ion Release From Ga2o3-Na 2o-Cao-Zno-Sio2 Bioactive Glasses, T. J. Keenan, A. W. Wren, A. Coughlan, Mark R. Towler, M. M. Hall

Chemical and Biochemical Engineering Faculty Research & Creative Works

Three glasses were designed for this study, including one Ga-free glass (Control), and two Ga-containing glasses (TGa-1, TGa-2). In the Ga-containing glasses, Ga₂O₃ is included at the expense of ZnO. This study focuses on the relation between pH and ion concentration present in solution in which these bioactive glasses have been submerged for periods of 1, 7, and 14 days. © 2013 IEEE.

Biocompatibility Of Cao-Na2o-Sio2/Tio2 Glass Ceramic Scaffolds For Orthopaedic Applications, A. W. Wren, A. Coughlan, K. E. Smale, S. T. Misture, B. P. Mahon, O. M. Clarkin, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

This work aims to determine the effect of substituting TiO₂ for SiO₂ in a 0.62SiO₂-Na₂O-0.24CaO based glass-ceramic scaffold. High temperature X-ray Diffraction (HT-XRD) was used to determine the sintering temperature (700oC). Both optical microscopy and x-ray micotomography was used to determine the average pore size (540-680ìm) of each scaffold. Cytocompatibility of each scaffold was conducted using murine mesenchymal stem cells. © 2013 IEEE.

An Investigation Into The Structure And Properties Of Cao-Zno-Sio 2-Tio2-Na2o Bioactive Glass/Hydroxyapatite Composite, Chokchai Yatongchai, Mark R. Towler, Anthony W. Wren

Chemical and Biochemical Engineering Faculty Research & Creative Works

Effect of the addition of CaO-ZnO-SiO₂-TiO₂-Na₂O glass as a reinforcing phase on properties of hydroxyapatite/glass composites was investigated. The addition of the glass caused the decomposition of HA phase to tricalcium phosphate, inhibiting densification in the HA/glass composites. However, depending on the glass concentration, some of the glass can act as a sintering aid enhancing the densification in the composites. © 2013 IEEE.

Gallium Containing Glass Polyalkenoate Bone Cements: Ion Release And E. Coli Inhibition, L. Placek, A. W. Wren, A. Coughlan, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

The Glass Polyalkenoate Cement (GPC) series (LCon., LGa-1 and LGa-2) containing gallium (Ga) and a 50 wt% addition of E11 polyacrylic acid (PAA), previously developed, was evaluated for ion release, specifically Si, Ca, Zn and Ga, and E. coli inhibition. The maximum inhibition was observed in the t = 0 samples and was 0.35 mm for LCon. and 0.65 mm for LGa-1 and LGa-2. © 2013 IEEE.

Physiological Fluid Specific Agglomeration Patterns Diminish Gold Nanorod Photothermal Characteristics, Kristen K. Comfort, Jared W. Speltz, Bradley M. Stacy, Larry R. Dosser, Saber M. Hussain

Chemical and Materials Engineering Faculty Publications

Investigations into the use of gold nanorods (Au-NRs) for biological applications are growing exponentially due to their distinctive physicochemical properties, which make them advantageous over other nanomaterials. Au-NRs are particularly renowned for their plasmonic characteristics, which generate a robust photothermal response when stimulated with light at a wavelength matching their surface plasmon resonance. Numerous reports have explored this nanophotonic phenomenon for temperature driven therapies; however, to date there is a significant knowledge gap pertaining to the kinetic heating profile of Au-NRs within a controlled physiological setting. In the present study, the impact of environmental composition on Au-NR behavior and degree …

Engineered Nanotopography On Electrospun Plla Microfibers Modifies Raw 264.7 Cell Response, Nicholas J. Schaub, Tara Britton, Rupak Rajachar, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this study, we created a new method of electrospinning capable of controlling the surface structure of individual fibers (fiber nano topography). The nano topographical features were created by a phase separation in the fibers as they formed. To control the phase separation, a nonsolvent (a chemical insoluble with the polymer) was added to an electrospinning solution containing poly-l-lactic acid (PLLA) and chloroform. The nano topography of electro spun fibers in the PLLA/chloroform solution was smooth. However, adding a small weight (< 2% of total solution) of a single nonsolvent (water, ethanol, or dimethyl sulfoxide) generated nanoscale depressions on the surface of the fibers unique to the nonsolvent added. Additionally, nanoscale depressions on electro spun fibers were observed to change with dimethyl sulfoxide (DMSO) concentration in the PLLA/chloroform solution. A nonlinear relationship was found between the concentration of DMSO and the number and size of nano topographical features. The surface depressions did not alter the hydrophobicity of the scaffold or degradation of the scaffold over a two-day period. To determine if fiber nano topography altered cell behavior, macrophages (RAW 264.7 cells) were cultured on fibers with a smooth nano topography or fibers with nanoscale depressions. RAW 264.7 cells spread less on fibers with nanoscale depressions than fibers with a smooth topography (p < 0.05), but there were no differences between groups with regard to cell metabolism or the number of adherent cells. The results of this study demonstrate the necessity to consider the nano topography of individual fibers as these features may affect cellular behavior. More importantly, we demonstrate a versatile method of controlling electro spun fiber nano topography. © 2013 American Chemical Society.

Adhesive Elastomeric Proteins, Haefa Mansour, Julie Liu

The Summer Undergraduate Research Fellowship (SURF) Symposium

Sutures and staples commonly used to close surgical wounds tend to be much stiffer than the surrounding tissue, often resulting in external tissue damage. Surgical adhesives provide a promising alternative to these sutures and staples. Ideal surgical adhesives are biocompatible, able to set well and remain sticky in moist conditions, possess strong adhesive and cohesive properties, and exhibit mechanical properties that mimic those of the surrounding tissue. Unfortunately, the adhesives available today are unable to satisfactorily meet all of these criteria. We are utilizing protein engineering techniques to design, create, and test a new surgical adhesive that combines the adhesive …

Characterization Of The Saturation Level Of Nucleosome Arrays And Plasmids By Mnase Digestion, Wenjie Liu, Nathan Nurse, Chongli Yuan

The Summer Undergraduate Research Fellowship (SURF) Symposium

Studying processes involving DNA such as DNA replication and transcription is best done in the context of chromatin because the structure of DNA influences the efficiency of such processes. Chromatin structure is derived from DNA wrapping around histone octamers with the histone octamer density termed saturation level. For in vitro studies on DNA replication and transcription, it is important to maintain a constant saturation level so that saturation level can be removed as a variable. Our goal is to characterize the saturation level of plasmids using the rate of MNase digestion. MNase digestions were first performed on reconstituted nucleosome arrays …

Comparison Of A Sio2-Cao-Zno-Sro Glass Polyalkenoate Cement To Commercial Dental Materials: Ion Release, Biocompatibility And Antibacterial Properties, A. W. Wren, A. Coughlan, M. M. Hall, M. J. German, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Ion Release and biocompatibility of a CaO-SrO-ZnO-SiO₂ (BT 101) based glass polyalkenoate cement (GPC) was compared against commercial GPCs, Fuji IX and Ketac Molar. The radiopacity (R) was similar for each material, 2.0-2.8. Ion release was evaluated on each material over 1, 7, 30 and 90 days. BT 101 release included Ca (23 mg/L), Sr (23 mg/L) Zn (13 mg/L), Si (203 mg/L). Fuji IX release includes Ca (0.7 mg/L), Al (3 mg/L) Si (26 mg/L), Na (60 mg/L) and P (0.5 mg/L) while Ketac Molar release includes Ca (1 mg/L), Al (0.6 mg/L) Si (23 mg/L), Na (76 …

Automated Methods To Determine Electrospun Fiber Alignment And Diameter Using The Radon Transform, Nicholas J. Schaub, Sean J. Kirkpatrick, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Recent evidence demonstrates the ability to change cell function by altering the physical properties of electro spun scaffolds, but many studies still do not characterize electro spun fiber alignment and diameter. To aid in the reporting of these crucial properties, we demonstrate two methods of quantifying electro spun fiber alignment with one method capable of determining electro spun fiber diameter. The first method assesses fiber alignment in a scanning electron microscopy image using the Radon Transform (RT) to calculate the entropy of the fibers in the image. The RT entropy method was more sensitive than a commonly used Fast Fourier …

Materials Education And Research In Art And Design: A New Role For Libraries (Survey Stats), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Education And Research In Art And Design: A New Role For Libraries (Program Sheet), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Education And Research In Art And Design: A New Role For Libraries (Program Booklet), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Education And Research In Art And Design: A New Role For Libraries (Website), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Collection Creation And Administration: A New Role For Libraries (White Paper), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

The Problem/Opportunity: To define, identify, and guide design-based materials collections in academic settings and foster community among those with existing collections and/or those considering creating and supporting one.

Contents and topics:

1. What is a materials collection?
2. Why have a materials collection?
3. Acquisition strategies
4. Organizational approaches
5. Programming possibilities
6. Symposium summary
7. Resources

Characterisation Of Ga2o3-Na2o-Cao-Zno- Sio2 Bioactive Glasses, A. W. Wren, T. Keenan, A. Coughlan, F. R. Laffir, D. Boyd, Mark R. Towler, M. M. Hall

Chemical and Biochemical Engineering Faculty Research & Creative Works

The structural role of Gallium (Ga) is investigated when substituted for Zinc (Zn) in a 0.42SiO₂-0.40-xZnO-0.10Na₂O-0.08CaO glass series, (where x = 0.08). Each starting material was amorphous, and the network connectivity (NC) was calculated assuming Ga acts as both a network modifier (1.23), and also as a network former. Assuming a network forming role for Ga the NC increased with increasing Ga concentration throughout the glass series (Control 1.23, TGa-1 2.32 and TGa-2 3.00). X-ray photoelectron spectroscopy confirmed both composition and correlated NC predictions. Raman spectroscopy was employed to investigate Q-structure and found that a shift …

In Vivo Efficacy Of Chitosan/Interleukin-12 In Controlling Lung Metastasis In 4t1 Breast Cancer Model, Jimmy Vo

Biomedical Engineering Undergraduate Honors Theses

Cancer immunotherapy has emerged as a leading front in cancer treatment. In contrast to other treatment methods such as radiation and surgery, immunotherapy trains the patient's body to recognize and eliminate tumors, thus preventing reoccurrence of secondary tumors. IL-12 has been shown to display a potent anti-tumor immune response in mice; however, when clinical trials were conducted, it was shown to be toxic and in some cases fatal when administered systemically.1,2 Because of this, local delivery of IL-12 is under investigation. Our lab has shown that when paired with the polymer chitosan, local, intratumoral (i.t.) injections of IL-12 are retained …

Highly Sensitive Method For Detecting And Separating Pathogens Using Paramagnetic Particles And A Micro-Fluidic System, William Ryan

Biomedical Engineering Undergraduate Honors Theses

Water is one of the most important compounds on Earth. If a water supply is contaminated with a pathogen, it can have devastating results to an individual or a community. This research is directed at constructing an easily reproducible procedure that could increase the sensitivity of detecting and separating bacteria from the current limits of about 100 cells to 10-20 cells per sample with a ultimate goal of a single cell detection. Here, we report a micro-fluidic system to magnetically capture pathogenic bacteria in water followed by rapid impedance detection using Escherichia coli K-12 as a model bacterium. Paramagnetic beads …

Comparing Decellularized Muscle Tissue With An Engineered Muscle Biomaterial, Katelin Cherry

Biomedical Engineering Undergraduate Honors Theses

Decellularized tissues composed of extracellular matrix are commonly used for tissue transplantations but this method has many limitations. An alternative approach is to create an extracellular matrix by seeding degradable foams with cells, culturing these foams to allow extracellular matrix to be secreted from the cells, then washing away the degradable foam to collect the material that is produced. This study was interested in comparing decellularized skeletal muscle tissue to an engineered biomaterial that was seeded with skeletal muscle myoblast cells. Collagen content of decellularized tissue and engineered biomaterial were quantified using a hydroxyproline assay to compare the two samples. …

Rapid Detection And Quantification Of Mycobacterium Tuberculosis Using Single-Based Extension And Capillary Electrophoresis, Anh Vu

Biomedical Engineering Undergraduate Honors Theses

In 1993, the World Health Organization (WHO) has declared tuberculosis (TB) a global emergency. Since then, more than 30 million lives have been claimed by that world-wide epidemic. In 2011, 8.7 million people “felt ill” because of TB and not all TB cases were reported to clinicians. Therefore, it is important to accurately identify TB patients by developing a diagnostic method that is sensitive, fast, and cost-effective. However, conventional methods have not met those criteria because they either require lengthy procedures or may misdiagnose TB cases. Hence, the automated Xpert MTB/RIF, endorsed by WHO in 2010, was developed and so …

Aluminium-Free Glass Polyalkenoate Cements: Ion Release And In Vitro Antibacterial Efficacy, A. W. Wren, J. P. Hansen, S. Hayakawa, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glass polyalkenoate cements (GPCs) have exhibited potential as bone cements. This study investigates the effect of substituting TiO₂ for SiO₂ in the glass phase and the subsequent effect on cement rheology, mechanical properties, ion release and antibacterial properties. Glass characterization revealed a reduction in glass transition temperature (T_g) from 685 to 669 C with the addition of 6 mol % TiO₂ (AT-2). Magic angle spinning nuclear magnetic resonance (MAS-NMR) revealed a shift from -81 ppm to -76pmm when comparing a Control glass to AT-2, indicating de-polymerization of the Si network. The incorporation of TiO_{2 …}

Picture Of A Chelate In Exchange: The Crystal Structure Of Nahodotma, A 'Semi'-Hydrated Chelate, Katherine M. Payne, Edward J. Valente, Silvio Aime, Mauro Botta, Mark Woods

Chemistry Faculty Publications and Presentations

Crystallography generally only provides static structural information. This can render it an ineffective technique for probing dynamic solution state processes. A crystal of HoDOTMA affords unique structures that effectively represent that of a lanthanide tetra-acetate chelate mid-way through the water exchange process.

Comparison Of A Sio2-Cao-Zno-Sro Glass Polyalkenoate Cement To Commercial Dental Materials: Glass Structure And Physical Properties, A. W. Wren, A. Coughlan, F. R. Laffir, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glass polyalkenoate cements (GPCs) have previously been considered for orthopedic applications. A Zn-GPC (BT 101) was compared to commercial GPCs (Fuji IX and Ketac Molar) which have a setting chemistry analogous to BT 101. Handling properties (working, T_w and setting, T_s times) for BT 101 were shorter than the commercial GPCs. BT 101 also had a higher setting exotherm (S_x - 34 °C) than the commercial GPCs (29 °C). The maximum strengths for BT 101, Fuji IX, and Ketac Molar were 75, 238, and 216 MPa (compressive, σ_c), and 34, 54, and 62 MPa (biaxial …

How Atomic Level Interactions Drive Membrane Fusion: Insights From Molecular Dynamics Simulations, Navendu Bhatnagar

Wayne State University Dissertations

This project is focused on identifying the role of key players in the membrane fusion process at the atomic level with the use of molecular dynamics simulations. Membrane fusion of apposed bilayers is one of the most fundamental and frequently occurring biological phenomena in living organisms. It is an essential step in several cellular processes such as neuronal exocytosis, sperm fusion with oocytes and intracellular fusion of organelles to name a few. Membrane fusion is a frequent process in a living organism but is still not fully understood at the atomic level in terms of the role of various factors …

Microfluidic Devices Applied On Enriching Post –Translational Modified Proteins For Proteomics, Hui Xia

Doctoral Dissertations

In this work, microfluidic devices were developed for enriching post-translational modified proteins. Post-translational modifications (PTM) of proteins play essential roles in cellular physiology and disease. The identification of protein substrates and detection of modification site helps understand PTM-mediated regulation in essential biological pathways and functions in various diseases. However, PTM proteins are typically present only at trace levels, making them difficult to identify in mass spectrometry based proteomics. This work study is about the design, fabrication and testing of the microfluidic device for the enrichment of abundant amount of PTMs. Carbonylated protein is used as a representative PTM to illustrate …

Structured Materials For Catalytic And Sensing Applications, Selma Hokenek

USF Tampa Graduate Theses and Dissertations

The optical and chemical properties of the materials used in catalytic and sensing applications directly determine the characteristics of the resultant catalyst or sensor. It is well known that a catalyst needs to have high activity, selectivity, and stability to be viable in an industrial setting. The hydrogenation activity of palladium catalysts is known to be excellent, but the industrial applications are limited by the cost of obtaining catalyst in amounts large enough to make their use economical. As a result, alloying palladium with a cheaper, more widely available metal while maintaining the high catalytic activity seen in monometallic catalysts …

Applications Of Antioxidant And Anti-Inflammatory Polymers To Inhibit Injury And Disease, David B. Cochran

Theses and Dissertations--Chemical and Materials Engineering

There is an undeniable link between oxidative stress, inflammation, and disease. Currently, approaches using antioxidant therapies have been largely unsuccessful due to poor delivery and bioavailability. Responding to these limitations, we have developed classes of polymer and delivery systems that can overcome the challenges of antioxidant and anti-inflammatory therapy. In our initial studies, nanoparticles of poly(trolox), a polymeric form of trolox, were surface-modified with antibodies. This modification allows for specific targeting to endothelial cells, affording controllable and localized protection against oxidative stress. We have shown these targeted nanoparticles bind, internalize, and provide protection against oxidative stress generation and cytotoxicity from …

Fabrication Of Cao-Nao-Sio2/Tio2 Scaffolds For Surgical Applications, A. W. Wren, A. Coughlan, K. E. Smale, S. T. Misture, B. P. Mahon, O. M. Clarkin, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

A series of titanium (Ti) based glasses were formulated (0.62 SiO₂-0.14 Na₂O-0.24 CaO, with 0.05 mol% TiO₂ substitutions for SiO₂) to develop glass/ceramic scaffolds for bone augmentation. Glasses were initially characterised using X-ray diffraction (XRD) and particle size analysis, where the starting materials were amorphous with 4.5 μm particles. Hot stage microscopy and high temperature XRD were used to determine the sintering temperature (̃700 °C) and any crystalline phases present in this region (Na₂Ca₃Si₆O₁₆, combeite and quartz). Hardness testing revealed that the Ti-free control (ScC- …

Developing Novel Prognostic Biomarkers For Multivariate Fracture Risk Prediction Algorithms, Ernest K. Poku, Mark R. Towler, Niamh M. Cummins, Jeff D. Newman

Chemical and Biochemical Engineering Faculty Research & Creative Works

Multivariate prediction algorithms such as FRAX® and QFracture Scores provide an opportunity for new prognostic biomarkers to be developed and incorporated, potentially leading to better fracture prediction. As more research is conducted into these novel biomarkers, a number of factors need to be considered for their successful development for inclusion in these algorithms. In this review, we describe two well-known multivariate prediction algorithms for osteoporosis fracture risk applicable to the UK population, FRAX and QFracture Scores, and comment on the current prognostic tools available for fracture risk; dual X-ray assessment, quantitative ultrasonography, and genomic/biochemical markers. We also highlight the factors …