Chemical Engineering Commons^™

Leaching Of Potential Hazardous Elements Of Coal Cleaning Rejects, Luis F.O. Silva, Maria Izquierdo, Xavier Querol, Robert B. Finkelman, Marcos L.S. Oliveira, Marcus Wollenschlager, Mark R. Towler, Rafael Pérez-López, Felipe Macias

Chemical and Biochemical Engineering Faculty Research & Creative Works

The geochemical characteristics of coal cleaning rejects (CCR) in Santa Catarina State, Brazil, were investigated. Around 3.5 million ton/ year of coal waste are dumped in Santa Catarina State. Coal beneficiation by froth flotation results in large amounts of CCR composed of coaly and mineral matter, the latter characterized by the occurrence of sulphide minerals and a broad array of leachable elements. The total and leachable contents of more than 60 elements were analyzed. Atmospheric exposure promotes sulphide oxidation that releases substantial sulphate loads as well as Ca²⁺, K⁺, Mg²⁺, Cl- and Al^{3+ …}

The Structural Role Of Titanium In Ca-Sr-Zn-Si/Ti Glasses For Medical Applications, A. W. Wren, F. R. Laffir, A. Kidari, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glasses for medical applications are used in particulate form or as a cement component. This work was undertaken to determine structural changes in 0.48SiO₂-0.36ZnO-0.12CaO-0.04SrO glass when the SiO₂ is substituted with 5 mol% increments of TiO2. X-ray Diffraction (XRD) was used to determine the presence of crystallinity. This occurred after additions of 20 mol% TiO₂. Differential Thermal Analysis (DTA) and Network connectivity (NC) calculations determined that by increasing the TiO₂ content, the T_g and NC reduced (T_g 670 °C to 632 °C, NC 1.83 to -1.14) suggesting that TiO₂ acts as …

Electrochemical Investigation Of Chromium Nanocarbide Coated Ti-6al-4v And Co-Cr-Mo Alloy Substrates, Viswanathan Swaminathan, Haitong Zeng, Daniel Lawrynowicz, Zongtao Zhang, Jeremy L. Gilbert

Biomedical and Chemical Engineering - All Scholarship

This study investigated the electrochemical behavior of chromium nano-carbide cermet coating applied on Ti–6Al–4V and Co–Cr–Mo alloys for potential application as wear and corrosion resistant bearing surfaces. The cermet coating consisted of a highly heterogeneous combination of carbides embedded in a metal matrix. The main factors studied were the effect of substrate (Ti–6Al–4V vs. Co–Cr–Mo), solution conditions (physiological vs. 1 M H₂O₂ of pH 2), time of immersion (1 vs. 24 h) and post coating treatments (passivation and gamma sterilization). The coatings were produced with high velocity oxygen fuel (HVOF) thermal spray technique at atmospheric conditions to …

Reinforced Chitosan-Based Heart Valve Scaffold And Utility Of Bone Marrow-Derived Mesenchymal Stem Cells For Cardiovascular Tissue Engineering, Mohammad Z. Albanna

Wayne State University Dissertations

Recent research has demonstrated a strong correlation between the differentiation profile of mesenchymal stem cells (MSCs) and scaffold stiffness. Chitosan is being widely studied for tissue engineering applications due to its biocompatibility and biodegradability. However, its use in load-bearing applications is limited due to moderate to low mechanical properties. In this study, we investigated the effectiveness of a fiber reinforcement method for enhancing the mechanical properties of chitosan scaffolds. Chitosan fibers were fabricated using a solution extrusion and neutralization method and incorporated into porous chitosan scaffolds. The effects of different fiber/scaffold mass ratios, fiber mechanical properties and fiber lengths on …

Using Thermally Coupled Reactive Distillation Columns In Biodiesel Production, Nghi Nguyen, Yaşar Demirel

Yaşar Demirel Publications

Production of ethyl dodecanoate (biodiesel) using lauric acid and methanol with a solid acid catalyst of sulfated zirconia is studied by using two distillation sequences. In the first sequence, the methanol recovery column follows the reactive distillation column. In the second sequence, the reactive distillation and methanol recovery columns are thermally coupled. Thermally coupled distillation sequences may consume less energy by allowing interconnecting vapor and liquid streams between the two columns to elminate reboiler or condenser or both. Here we study the thermally coupled side-stripper reactive distillation and eliminate the condenser of the reactive distillation column. Both the sequences are …

Investigation Of Microbubble/Droplet Formation In Cross-Flow And Co-Flow Micro Devices, Tom J. John

Doctoral Dissertations

The primary goal of the work presented in this dissertation is to generate microbubbles of a diameter of less than 15μm inside micro channels. In order to achieve this detailed understanding, the facts and limitations behind the generation of microbubbles inside a micro channel are determined from existing literature. The major limitations of the current bubble/droplet generators are found to be the bubble confinement effect, the merging of bubbles, the difficulty in determining bubble diameter and the need for smaller channels to generate smaller bubbles. A device eliminating these drawbacks is conceptualized, and its feasibility is studied using COMSOL® and …

The Bioactivity And Ion Release Of Titanium-Containing Glass Polyalkenoate Cements For Medical Applications, A. W. Wren, N. M. Cummins, F. R. Laffir, S. P. Hudson, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

The ion release profiles and bioactivity of a series of Ti containing glass polyalkenoate cements. Characterization revealed each material to be amorphous with a T_g in the region of 650-660°C. The network connectivity decreased (1.83-1.35) with the addition of TiO₂ which was also evident with analysis by X-ray photoelectron spectroscopy. Ion release from cements were determined using atomic absorption spectroscopy for zinc (Zn^₂₊), calcium (Ca^₂₊), strontium (Sr^₂₊), Silica (Si^₄₊) and titanium (Ti4+). Ions such as Zn^₂₊ (0.1-2.0 mg/l), Ca²⁺ (2.0-8.3 mg/l,) Sr²⁺ (0.1-3.9 mg/l), and S^{i4+ …}

The Response Of Pseudomonas Aeruginosa Biofilm To The Presence Of A Glass Polyalkenoate Cement Formulated From A Silver Containing Glass, A. Coughlan, M. P. Ryan, N. M. Cummins, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

No abstract provided.

The Feasibility Of Using Bifidobacteria Bifidum (Atcc 700541) For The Production Of Prebiotic Oligosaccharides, Candice Marie Luehrs

Masters Theses

"Galactooligosaccharides (GOS) are prebiotics that are being used to influence intestinal microbiota towards health promoting, beneficial bacteria like bifidobacteria. Natural sources of GOS are not found in suitable levels to achieve the desired health effects so economically viable commercial production methods are important. Enzymatic conversion of lactose to GOS through transgalactosylation is a preferred method since the starting material is inexpensive and readily available. Enzymes used in batch production are purified from fungal or bacterial sources or remain in whole cells cultured for GOS production. Purified or unbound enzymes are single use whereas enzymes retained within whole cells can potentially …

The Conversion Of Low-Grade Heat Into Power Using Supercritical Rankine Cycles, Huijuan Chen

USF Tampa Graduate Theses and Dissertations

Low-grade heat sources, here defined as below 300 ºC, are abundantly available as industrial waste heat, solar thermal, and geothermal, to name a few. However, they are under-exploited for conversion to power because of the low efficiency of conversion. The utilization of low-grade heat is advantageous for many reasons. Technologies that allow the efficient conversion of low-grade heat into mechanical or electrical power are very important to develop.

This work investigates the potential of supercritical Rankine cycles in the conversion of low-grade heat into power. The performance of supercritical Rankine cycles is studied using ChemCAD linked with customized excel macros …

Plasma Mediated Molecular Delivery, Richard J. Connolly

USF Tampa Graduate Theses and Dissertations

Non-viral delivery of plasmid DNA has traditionally relied upon physical forces applied directly to target tissues. These physical methods typically involve contact between an applicator and the target tissue and often cause transient patient discomfort. To overcome the contact-dependent limitations of such delivery methodologies, an atmospheric direct current plasma source was developed to deposit ionized gas molecules onto localized treatment sites. The deposition of charged species onto a treatment site can lead to the establishment of an electric field with strengths similar to those used for traditional electroporation. In vitro experiments proved that this technology could transiently permeabilize cell membranes …

The Virtual Hip: An Anatomically Accurate Finite Element Model Based On The Visible Human Dataset, Jonathan M. Ford

USF Tampa Graduate Theses and Dissertations

The purpose of this study is to determine if element decimation of a 3-D anatomical model affects the results of Finite Element Analysis (FEA). FEA has been increasingly applied to the biological and medical sciences. In order for an anatomical model to successfully run in FEA, the 3-D model’s complex geometry must be simplified, resulting in a loss of anatomical detail. The process of decimation reduces the number of elements within the structure and creates a simpler approximation of the model. Using the National Library of Medicine’s Visible Human Male dataset, a virtual 3-D representation of several structures of the …

The Effect Of Ionic Dissolution Products Of Ca-Sr-Na-Zn-Si Bioactive Glass On In Vitro Cytocompatibility, S. Murphy, A. W. Wren, Mark R. Towler, D. Boyd

Chemical and Biochemical Engineering Faculty Research & Creative Works

Many commercial bone grafts cannot regenerate healthy bone in place of diseased bone. Bioactive glasses have received much attention in this regard due to the ability of their ionic dissolution products to promote cell proliferation, cell differentiation and activate gene expression. Through the incorporation of certain ions, bioactive glasses can become therapeutic for specific pathological situations. Calcium-strontium-sodium-zinc-silicate glass bone grafts have been shown to release therapeutic levels of zinc and strontium, however the in vitro compatibility of these materials is yet to be reported. In this study, the in vitro cytocompatibility of three different calcium-strontium-sodium-zinc-silicate glasses was examined as a …

Comparison Of Antibacterial Properties Of Commercial Bone Cements And Fillers With A Zinc-Based Glass Polyalkenoate Cement, A. W. Wren, N. M. Cummins, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Postoperative infection following invasive surgical procedures is a significant cause for concern, particularly in spinal reconstructive surgery. The objective of this study is to compare the antibacterial efficacy of a novel zinc-based glass polyalkenoate cement (Zn-GPC) based on 0.04SrO-0.12CaO-0.36ZnO- 0.48SiO₂ glass, to a number of commercially available bone cements and fillers including Simplex P + Tobramycin (S_Tob), Spineplex (S_pine) and Novabone Putty (N_Put). The agar diffusion test was performed on each material against Escherichia coli, Staphlococcus epidermidis, Pseudomonas aeruginosa and Staphlococcus Aureus. S_Tob was found to produce large inhibition zones in each …

A Spectroscopic Investigation Into The Setting And Mechanical Properties Of Titanium Containing Glass Polyalkenoate Cements, A. W. Wren, A. Kidari, N. M. Cummins, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Titanium (Ti) implants are extensively used in a number of biomedical and dental applications. This work introduces Ti into the glass phase of a zinc-based glass polyalkenoate cement (GPC) and investigates changes in handling and mechanical properties considering two molecular weight polyacrylic acids (PAA), E9 and E11. Considering the handling properties, the working time (T_w) increased from 50 s_E9, 32 s_E11 (BT 101, Ti-free) to 169 s_E9, 74 s_E11 with TW-Z (highest Ti content), respectively. The setting time (T_s) increased from 76 s_E9, 47 s_E11 (BT 101) …

Investigation Of Buildup Dose For Therapeutic Intensity Modulated Photon Beams In Radiation Therapy, Khosrow Javedan

USF Tampa Graduate Theses and Dissertations

Buildup dose of Mega Voltage (MV) photon beams can be a limiting factor in intensitymodulated radiation therapy (IMRT) treatments. Excessive doses can cause patient discomfort and treatment interruptions, while underdosing may lead to local failure.

Many factors which contribute to buildup dose, including the photon beam energy spectrum, scattered or contaminant radiation and their angular distribution, are not modeled well in commercial treatment planning systems. The accurate Monte Carlo method was employed in the studies to estimate the doses.

Buildup dose of 6MV photon beams was investigated for three fundamentally different IMRT modalities: between Helical TomoTherapy and traditional opposed tangential …

The Effect Of Adding Organic Polymers On The Handling Properties, Strengths And Bioactivity Of A Ca-Sr-Zn-Si Glass Polyalkenoate Cement, A. W. Wren, N. M. Cummins, A. Coughlan, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

This work demonstrates the addition of a number of naturally occurring proteins/polymers to a zinc-based glass polyalkenoate cements (GPCs). Chitin (Chi.), collagen (Col.), cysteine (Cys.) and keratin (Ker.) were added with the intention of improving the bioactivity of this cement. Initial testing involved characterization of the glass with X-ray diffraction (XRD) and differential thermal analysis (DTA) before and after sterilization with γ-irradiation. No significant changes occurred as a result of sterilization. Handling properties of the modified cements were not significantly different from those of the control, BT 101 (Working T_w-36_s, and setting time T_s-70 …

Synthesis, Characterization, And Self-Assembly Of Gold Nanorods And Nanoprisms, Kristina L. Tran

USF Tampa Graduate Theses and Dissertations

The unique properties of gold nanoparticles make them excellent candidates for applications in electronics, sensing, imaging, and photothermal therapy. Though abundant literature exists for isotropic gold nanoparticles, work on nanoparticles of different shapes has been gaining interest recently. Anisotropic gold nanoparticles, such as nanorods and nanoprisms, have tunable optical properties in the visible and near-infrared regions. Through synthesis and surface modification, the production of various shapes of these gold nanoparticles can be controlled to meet different applications.

Two different types of gold nanorods were used in this thesis. The first type was stabilized with cetyltrimethylammonium bromide (CTAB) and had aspect …

Influence Of Morphology And Processing On Xps Characterisation Of Sro-Ca-Zno-Sio2 Glass, F. R. Laffir, A. W. Wren, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

A study was conducted to demonstrate the influence of morphology and processing on X-ray photoelectron spectroscopic (XPS) characterization SrO-Ca-ZnO-SiO₂ glass. The glass formulation being investigated was originally synthesized for developing a novel glass polyalkenoate cement (GPC). High resolution photoelectron spectra of Zn 2p, Ca 2p, Sr 3d, Si 2p, O 1s, and C 1s were recorded for the different forms of glass. It was observed that there was preferential enrichment of Zn²⁺ with an increase in the proportion of NBO for the investigated BT101 glass. The relative atomic concentration of Zn in BT101 glass was high and resulted …

Effects Of Monoclonal Anti-Abeta Antibodies On The Amyloid Beta Peptide Fibrillogenesis And Their Involvement In The Clearance Of Alzheimer's Disease Plaques, Jeffy Pilar Jimenez

USF Tampa Graduate Theses and Dissertations

Alzheimer’s disease (AD) is the most common cause of senile dementia worldwide. AD is a neurodegenerative disorder characterized by the loss of memory and language skill, collapse of the cognitive function, and distortion of social behavior. As of today, the onset mechanisms of AD and cure are unknown; however, three hallmarks are commonly encountered: extra and intracellular accumulation of amyloid beta (A!) peptide plaques, formation of intracellular neurofibrillary tangles, and inevitable neuronal death. Hypothetically, a possible scenario provoking or involved in the onset of AD is a cascade effect that starts with an imbalance in the production and clearance of …

Comparative Studies On Oxygen Mass Transfer For The Design And Development Of A Single-Use Fermentor, Kristan L. Sorenson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Accurate experimental oxygen mass transfer coefficient, a measure of how quickly oxygen travels from a gas bubble to the bulk liquid, is important for comparing performance and for evaluating the oxygen transfer capability of a fermentor. Delays in probe response and changing gas volumes upon start-up of gassing affect the accuracy of oxygen transfer measurements. To mitigate these inaccuracies, a standard correction procedure for oxygen mass transfer data was established for highly oxygenated, well-mixed fermentation systems. Probe response time correction was generated by applying a second-order response model to dissolved oxygen probes and shown to be effective within 4%. By …

Synthesis Of An Endothelial Cell Mimicking Surface Containing Thrombomodulin And Endothelial Protein C Receptor, Karl E. Kador

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Synthetic materials for use in blood contacting applications have been studied for many years with limited success. One of the main areas of need for these materials is the design of synthetic vascular grafts for use in the hundreds of thousands of patients who have coronary artery bypass grafting, many without suitable veins for autologous grafts. The design of these grafts is constrained by two common modes of failure, the formation of intimal hyperplasia (IH) and thrombosis. IH formation has been previously linked to a mismatching of the mechanical properties of the graft and has been overcome by creating grafts …

Mechanical Properties Of Hydroxyapatite-Zirconia Compacts Sintered By Two Different Sintering Methods, Declan J. Curran, Thomas J. Fleming, Mark R. Towler, Stuart Hampshire

Chemical and Biochemical Engineering Faculty Research & Creative Works

Microwave sintering is traditionally employed to reduce the sintering temperature required to densify powder compacts. The effect of microwave heating on hydroxyapatite (HA)-zirconia (ZrO₂) green bodies has been investigated in order to understand how microwave energy may affect the physical and mechanical properties of the resultant densified composites. Laboratory synthesised nano-sized HA and a commercial nano-sized ZrO₂ powder have been ball milled to create mixtures containing 0-5 wt% ZrO₂ loadings. Compacts were microwave sintered at either 700, 1000 or 1200°C with a 1 h hold time. Comparative firings were also performed in a resistive element furnace …

Lipids And Collagen Matrix Restrict The Hydraulic Permeability Within The Porous Compartment Of Adult Cortical Bone, Demin Wen, Caroline Androjna, Amit Vasanji, Joanne M. Belovich, Ronald J. Midura

Chemical & Biomedical Engineering Faculty Publications

In vivo the hydraulic permeability of cortical bone influences the transport of nutrients, waste products and signaling molecules, thus influencing the metabolic functions of osteocytes and osteoblasts. In the current study two hypotheses were tested: the presence of (1) lipids and (2) collagen matrix in the porous compartment of cortical bone restricts its permeability. Our approach was to measure the radial permeability of adult canine cortical bone before and after extracting lipids with acetone-methanol, and before and after digesting collagen with bacterial collagenase. Our results showed that the permeability of adult canine cortical bone was below 4.0 × 10 …

Surface Engineering Of Macrophages With Nanoparticles To Generate A Cell-Nanoparticle Hybrid Vehicle For Hypoxia-Targeted Drug Delivery, Christopher A. Holden, Quan Yuan, W. Andrew Yeudall, Deborah A. Lebman, Hu Yang

Chemical and Biochemical Engineering Faculty Research & Creative Works

Tumors frequently contain hypoxic regions that result from a shortage of oxygen due to poorly organized tumor vasculature. Cancer cells in these areas are resistant to radiation- and chemotherapy, limiting the treatment efficacy. Macrophages have inherent hypoxia-targeting ability and hold great advantages for targeted delivery of anticancer therapeutics to cancer cells in hypoxic areas. However, most anticancer drugs cannot be directly loaded into macrophages because of their toxicity. In this work, we designed a novel drug delivery vehicle by hybridizing macrophages with nanoparticles through cell surface modification. Nanoparticles immobilized on the cell surface provide numerous new sites for anticancer drug …

Applications Of Ultrafine Powder Coatings, A.S. Mohammad Sayem Mozumder

Digitized Theses

Powder coatings have emerged as an alternative to the conventional liquid coatings when environmental regulations become stricter every year. The advantage of powder coatings mainly renders to their solvent-free formulations, because solvent(s) used in liquid coatings are to be evaporated to environment contributing to the total volatile organic compounds (VOCs) emissions. Although advantageous, until recently, powder coating was not able to provide surface finishes comparable to the liquid coatings. However, when ultrafine powders (particularly, in the size range of 15-25 µm) becomes flowable with the aid of nano-additive(s), ultrafine powder coatings (UPCs) came into business with its thinner and smoother …

Retrofit Of Distillation Columns In Biodiesel Production Plants, Nghi Nguyen, Yaşar Demirel

Yaşar Demirel Publications

Column grand composite curves and the exergy loss profiles produced by the Column-Targeting Tool of the Aspen Plus simulator are used to assess the performance of the existing distillation columns, and reduce the costs of operation by appropriate retrofits in a biodiesel production plant. Effectiveness of the retrofits is assessed by means of thermodynamics and economic improvements. We have considered a biodiesel plant utilizing three distillation columns to purify biodiesel (fatty acid methyl ester) and byproduct glycerol as well as reduce the waste. The assessments of the base case simulation have indicated the need for modifications for the distillation columns. …

Nonequilibrium Thermodynamics Modeling Of Coupled Biochemical Cycles In Living Cells, Yaşar Demirel

Yaşar Demirel Publications

Living cells represent open, nonequilibrium, self organizing, and dissipative systems maintained with the continuous supply of outside and inside material, energy, and information flows. The energy in the form of adenosine triphosphate is utilized in biochemical cycles, transport processes, protein synthesis, reproduction, and performing other biological work. The processes in molecular and cellular biological systems are stochastic in nature with varying spatial and time scales, and bounded with conservation laws, kinetic laws, and thermodynamic constraints, which should be taken into account by any approach for modeling biological systems. In component biology, this review focuses on the modeling of enzyme kinetics …

Evaluation Of Two Novel Aluminum-Free, Zinc-Based Glass Polyalkenoate Cements As Alternatives To Pmma Bone Cement For Use In Vertebroplasty And Balloon Kyphoplasty, Gladius Lewis, Mark R. Towler, Daniel Boyd, Matthew J. German, Anthony W. Wren, Owen M. Clarkin, Andrew Yates

Chemical and Biochemical Engineering Faculty Research & Creative Works

Vertebroplasty (VP) and balloon kyphoplasty (BKP) are now widely used for treating patients in whom the pain due to vertebral compression fractures is severe and has proved to be refractory to conservative treatment. These procedures involve percutaneous delivery of a bolus of an injectable bone cement either directly to the fractured vertebral body, VB (VP) or to a void created in it by an inflatable bone tamp (BKP). Thus, the cement is a vital component of both procedures. In the vast majority of VPs and BKPs, a poly(methyl methacrylate) (PMMA) bone cement is used. This material has many shortcomings, notably …

Synthesis And Characterization Of Magnetic Hydrogel Nanocomposites For Cancer Therapy Applications, Samantha Ann Meenach

University of Kentucky Doctoral Dissertations

Currently, cancer is the second leading cause of death in the United States. Conventional cancer treatment includes chemotherapy, radiation, and surgical resection, but unfortunately, all of these methods have significant drawbacks. Hyperthermia, the heating of cancerous tissues to between 41 and 45°C, has been shown to improve the efficacy of cancer therapy when used in conjunction with irradiation and/or chemotherapy. In this work, a novel method for remotely administering heat is presented. This method involves heating of tumor tissue using hydrogel nanocomposites containing magnetic nanoparticles which can be remotely heated upon exposure to an external alternating magnetic field (AMF). The …