Bioresource and Agricultural Engineering Commons^™

Alkaline Hydrogen Peroxide Pretreatment For Its Use In An On-Farm Bioprocessing Facility, Mary Kathryn Gray

Theses and Dissertations--Biosystems and Agricultural Engineering

Pretreatment is an essential step in biofuel production from lignocellulose. Disruption of the lignin structure gives enzymes and fermentation organisms access to long chains of cellulose and hemicellulose. For this project’s purposes, the pretreatment must work within the framework of an on-farm butanol bioprocessing facility. Alkaline hydrogen peroxide (AHP) is a delignification method that potentially provides several advantages. At the alkaline pH, powerful hydroxyl radicals are formed; which attack lignin. The objectives of this study were to determine if AHP removes substantial lignin for the feedstocks, corn stover, wheat straw, switchgrass and miscanthus, and to determine if AHP acts as …

Sodium Hydroxide Pretreatment Of Corn Stover And Subsequent Enzymatic Hydrolysis: An Investigation Of Yields, Kinetic Modeling And Glucose Recovery, Alicia Modenbach

Theses and Dissertations--Biosystems and Agricultural Engineering

Many aspects associated with conversion of lignocellulose to biofuels and other valuable products have been investigated to develop the most effective processes for biorefineries. The goal of this research was to improve the efficiency and effectiveness of the lignocellulose conversion process by achieving a more basic understanding of pretreatment and enzymatic hydrolysis at high solids, including kinetic modeling and separation and recovery of glucose.

Effects of NaOH pretreatment conditions on saccharide yields from enzymatic hydrolysis were characterized in low- and high-solids systems. Factors associated with pretreatment and hydrolysis were investigated, including duration of pretreatment at different temperatures and NaOH loadings, …

Hydrologic Characterization Of A Rain Garden Mitigating Stormwater Runoff From A Commercial Area, John T. Mcmaine

Theses and Dissertations--Biosystems and Agricultural Engineering

Impervious surfaces such as roads, sidewalks, and roofs increase the volume of runoff generated in a watershed. Traditional stormwater management techniques emphasize conveyance of runoff away from impervious surfaces in order to reduce flooding. Rain gardens are becoming popular as a different means to manage stormwater in such a way that runoff is captured and infiltrated onsite rather than conveyed offsite. A stormwater management system consisting of a rainwater harvest system, rain garden, and infiltration chamber was built at the Coca-Cola Refreshments USA, Inc. distribution center in Lexington, Kentucky during the fall of 2011. Precipitation, inflow, and water level were …

Nutrients Recycling Strategy For Microalgae-Based Co2 Mitigation System, Xinyi E

Theses and Dissertations--Biosystems and Agricultural Engineering

Coal-fired electricity production is the major emitter of CO₂ and other greenhouse gases including NO_x and SO_x. Microalgae-based CO₂ mitigation systems have been proposed to reduce the net CO₂ emission from coal-fired power plants. This study focused on developing an optimum culture media and exploring the possibilities for recycling nutrients, which were added as commercial mineralized chemicals at the beginning of cultivation.

In order to release the nutrients embedded in the cells so that they can be used as a nutrient source for new cells, Scenedesmus biomass was digested by anaerobic bacteria. Results showed …

Evaluation Of Handling Equipment Sound Pressure Levels As Stressors In Beef Cattle, Christina M. Lyvers

Theses and Dissertations--Biosystems and Agricultural Engineering

Sound pressure level (SPL) is known to cause stress in cattle but is often overlooked as a potential source of fear for cattle when designing handling equipment. Current literature does not offer guidelines for the design of equipment with regard to SPL. It is, however, recommended that handling equipment should be designed to minimize the SPL during handling. The purpose of this experiment was to measure stress levels in a group of cattle which were subjected to a series of varying sounds in order to determine a design threshold limit for handling equipment. Treatments included two frequencies, 1 kHz and …

Precise Evaluation Of Gnss Position And Latency Errors In Dynamic Agricultural Applications, Michael P. Sama

Theses and Dissertations--Biosystems and Agricultural Engineering

A method for precisely synchronizing an external serial data stream to the pulse-per-second (PPS) output signal from a global navigation satellite-based system (GNSS) receiver was investigated. A signal timing device was designed that used a digital signal processor (DSP) with serial inputs and input captures to generate time stamps for asynchronous serial data based on an 58593.75 Hz internal timer. All temporal measurements were made directly in hardware to eliminate software latency. The resolution of the system was 17.1 µs, which translated to less than one millimeter of horizontal position error at travel speeds typical of most agricultural operations.

The …

Using Gis To Delineate Headwater Stream Origins In The Appalachian Coal-Belt Region Of Kentucky, Jonathan A. Villines

Theses and Dissertations--Biosystems and Agricultural Engineering

Human activity such as surface mining can have substantial impacts on the natural environment. Performing a Cumulative Hydrologic Impact Assessment (CHIA) of such impacts on surface water systems requires knowing the location and extent of these impacted streams. The Jurisdictional Determination (JD) of a stream’s protected status under the Clean Water Act (CWA) involves locating and classifying streams according to their flow regime: ephemeral, intermittent, or perennial. Due to their often remote locations and small size, taking a field inventory of headwater streams for surface mining permit applications or permit reviews is challenging. A means of estimating headwater stream location …

"Apps"—An Innovative Way To Share Extension Knowledge, Joseph S. Dvorak, Tanya C. Franke-Dvorak, Randy R. Price

Biosystems and Agricultural Engineering Faculty Publications

Extension professionals across the country are continuously seeking innovative ways to reach clientele and to disseminate timely, educational information. A new avenue to reach clientele includes the use of smartphone "apps." The "Machinery Sizing" app, which was developed to ease the estimation of tractor horsepower to implement sizing for Extension clientele anytime, anywhere, is explained as a key example for Extension professionals to utilize apps in disseminating information to clientele. There are many benefits to using apps, including information availability wherever Internet service is available on the smartphone, ease of computations of equations, and automatic updates being sent to users.

Characterizing Physical Properties Of Gas-Phase Biofilter Media, Guilherme Del Nero Maia, G. Tatiana Sales, George B. Day V, Richard S. Gates, Joseph L. Taraba

Biosystems and Agricultural Engineering Faculty Publications

Gas-phase biofiltration is an effective technology for reduction of odors and trace-gas contaminants. Significant contributions to the technical literature regarding the characterization of biofilter media have been generated in the past two decades. Nevertheless, the information produced has not been systematically organized. The objective of this study is to demonstrate and document methods for physical characterization of gas-phase compost biofilters (GPCB). The inclusion of moisture content, compaction, and particle size effects in the determination of media bulk density and porosity, field capacity, drying rate analysis, water sorption isotherms, and resistance to airflow is demonstrated. Results indicated that: (1) higher moisture …

The Use Of High-Solids Loadings In Biomass Pretreatment – A Review, Alicia A. Modenbach, Sue E. Nokes

Biosystems and Agricultural Engineering Faculty Publications

The use of high‐solids loadings (≥ 15% solids, w/w) in the unit operations of lignocellulose conversion processes potentially offers many advantages over lower‐solids loadings, including increased sugar and ethanol concentrations and decreased production and capital costs. Since the term lignocellulosic materials refers to a wide range of feedstocks (agricultural and forestry residues, distillery by‐products, and dedicated energy crops like grasses), the term “solids loading” here is defined by the amount of dry material that enters the process divided by the total mass of material and water added to the material. The goal of this study is to provide a consolidated …

Microstructural And Mineralogical Transformation Of Hydraulically Disposed Fly Ash—Implications To The Environment, Jabulani S. Mahlaba, Elsabe P. Kearsley, Richard A. Kruger

Coal Combustion and Gasification Products Journal Archive

Increasing amounts of coal are combusted annually to meet the ever-increasing energy demands. The inevitable by-products include fly ash and saline effluents, which require acceptable disposal. The aim of this article is to compare the effect of hydraulic disposal with dry ash dumping. The results indicate that the former carries more environmental benefits based on the physical, chemical, and mineralogical aspects that were investigated.

Cordyline Fruticosa Growth And Soil Microbial Quality With Topical Application Of Coal Combustion By-Products Aggregates, Sangchul Hwang, Isomar Latorre, Eileen Irizarry

Coal Combustion and Gasification Products Journal Archive

Coal combustion by-products aggregates (CCAs) are a solidified composite of fly and bottom ashes (2:1, by wt). Here, we assessed the feasibility of beneficial use of CCAs as a soil amendment or conditioner by conducting an outdoor experiment with Cordyline fruticosa (lucky plant) to determine its growth and soil microbial quality under the influence of topical CCA application (95 tons ha21). Enhanced growth of C. fruticosa with CCA application was noted, with respect to plant height, growth rate, leaf size, and leaf chlorophyll intensity. Soil dehydrogenase activity and total heterotrophic bacteria count were greater with topical CCA application, especially in …

Influence Of Activator Solution Formulation On Fresh And Hardened Properties Of Low-Calcium Fly Ash Geopolymer Concrete, Carlos Montes, Erez N. Allouche

Coal Combustion and Gasification Products Journal Archive

The effect of the composition of activator solutions on fresh and hardened properties of geopolymer concrete was investigated. Research variables included liquid sodium silicate product (DH, NH, and StarH), sodium hydroxide molar concentration (6, 10, and 14), and sodium silicate–to–sodium hydroxide ratio (1, 2, and 3). Response variables were compressive strength, corrosion resistance expressed as remaining compressive strength and mass loss, and flowability. Results were analyzed using Minitab statistical software. Findings suggest that activator solution formulation has a significant effect on the properties of the resulting geopolymer binder. The experimental design used was found effective in establishing the optimum activator …

Mineralogical Transformations In Coal Feedstocks During Carbon Conversion, Based On Packed-Bed Combustor Tests: Part 2. Behavior Of Individual Particles, Ratale H. Matjie, Colin R. Ward, Zhongsheng Li

Coal Combustion and Gasification Products Journal Archive

Handpicked carbon-rich particles (coal or char), mineral-rich particles (heated stones), and bonded stone aggregates (clinkers) from the upper and lower parts of a pilot-scale packed-bed combustor bed, designed to simulate conversion or combustion processes, were subjected to mineralogical and inorganic geochemical studies, in order to evaluate the reactions that may occur during carbon conversion at a particle-by-particle scale. The mineral matter of the carbon-rich particles was found to have higher proportions of carbonate minerals and kaolinite than the mineral-rich (stone) particles in the coal feedstocks used in the study, and to form phases such as anorthite, gehlenite, pyrrhotite, troilite, and …

Mineralogical Transformations In Coal Feedstocks During Carbon Conversion, Based On Packed-Bed Combustor Tests: Part 1. Bulk Coal And Ash Studies, Ratale H. Matjie, Colin R. Ward, Zhongsheng Li

Coal Combustion and Gasification Products Journal Archive

Mineralogical and inorganic geochemical studies have been carried out on composite samples of six different coarse-crushed (,120 mm) feed coals tested in a pilot-scale packed-bed combustor designed to simulate conversion and some fixed-bed combustion processes, and also on composite samples of the ashes produced. The mineral matter of the coals consisted mainly of quartz, kaolinite, and Ca-bearing carbonate minerals (calcite, dolomite, aragonite), with minor proportions of illite, pyrite, and several other phases, along with some Ca in an organically associated form. The base to acid ratio of the coal ashes ranged from 0.1 to 0.3, due mainly to variations in …

Potential Indoor Air Exposures And Health Risks From Mercury Off-Gassing Of Coal Combustion Products Used In Building Materials, Christopher M. Long, Sonja N. Sax, Ari S. Lewis

Coal Combustion and Gasification Products Journal Archive

Coal combustion products (CCPs), including coal fly ash (CFA) and flue gas desulfurization (FGD) gypsum, have gained accepted use as substitutes for traditional substances in building materials. Because of the presence of mercury (Hg) in CCP materials, some concerns have been raised regarding the potential for Hg to off-gas from building materials into indoor air. Risk assessment offers a well-accepted, objective framework in which to determine whether such off-gassing could result in humanexposures of health concern. We thus conducted a screening-level human health risk assessment to estimate worst-case inhalation risks from indoor air exposures to Hg for multiple CCP utilization …

Quantifying The Benefits Of Using Flue Gas Desulfurization Gypsum In Sustainable Wallboard Production, Jin Cheol Lee, Sabrina L. Bradshaw, Tuncer B. Edil, Craig H. Benson

Coal Combustion and Gasification Products Journal Archive

Electric utilities produce more than 11.2 Mt of flue gas desulfurization (FGD) gypsum annually. Approximately 7.5 Mt is used in wallboard production. This article examines the environmental and cost benefits associated with replacement of natural gypsum in wallboard with FGD gypsum. A life-cycle analysis program was used to quantify the benefits of using FGD gypsum from electric power production in wallboard construction. Comparisons were made between energy consumption, water use, and greenhouse gas (GHG) emissions associated with obtaining and processing virgin gypsum material and those with FGD gypsum. The added impact of disposing of the unused FGD gypsum in landfills …

Waste Classification Of Slag Generated In A Pilot-Scale Entrained-Flow Gasifier, Ashleigh Cousins, Robin W. Hughes, David J. Mccalden, Dennis Y. Lu, Edward J. Anthony

Coal Combustion and Gasification Products Journal Archive

Series of gasification tests have been completed in the pilot-scale entrained-flow slagging gasifier at CanmetENERGY using Canadian coals, oil-sand coke, and blends of these fuels to determine if the produced slags are nonhazardous in nature. Solid wastes generated during these tests were analyzed for their trace metals, crystallinity, and toxic constituent leaching tendency in an attempt to provide more insight into the possibility of disposal or by-product use of gasifier-produced solid waste. The gasification tests were performed at conditions representative of commercial gasifiers using a dry-fuel-feed configuration. The lower-volatility elements were found to partition between the slag and process-water solids …

Automated System To Improve Levelness Of Reconstructed Soil, Venkata Srikiran Bodapati, Larry G. Wells

Biosystems and Agricultural Engineering Faculty Publications

Extraction of coal, ores, and minerals from the earth by surface mining has occurred for many years and has always presented a significant challenge with regard to restoration of productive soil to mined areas. Federal and state regulations require that land should be returned to pre-mine productivity or reclaimed as per specific standards following mining. Excessive compaction of reconstructed soil caused by traffic of heavy earth moving equipment has been an enduring challenge regarding successful restoration of soil. A mechanical system was previously designed and developed to reconstruct soil to a depth of 1.22 m (48 in.) while completely avoiding …

Prescribed Grazing On Pasturelands, Lynn E. Sollenberger, Carmen T. Agouridis, Eric S. Vanzant, Alan J. Franzluebbers, Lloyd B. Owens

Biosystems and Agricultural Engineering Faculty Publications

No abstract provided.

Assessment Of Conductivity Sensors Performance For Monitoring Mined Land Discharged Waters And An Evaluation Of The Hydrologic Performance Of The Guy Cove Stream Restoration Project, Travis Pritchard Maupin

Theses and Dissertations--Biosystems and Agricultural Engineering

The surface mining method of mountaintop removal has been shown to adversely affect the water quality and hydrologic characteristics of downstream regions. Based on recent scientific literature, the U.S. EPA issued guidance on the specific conductivity (EC25ºC) of waters discharged from mined lands in the Appalachian Coal Belt Region stating that these waters should have an EC25ºC less than 300-500 μS cm-1. Hence, accurately measuring EC25ºC levels of mine discharged waters has significant implications. Furthermore, the development of reclamation techniques that positively impact the hydrological and water quality aspects of valley fill (VF) discharge is needed. To tackle these questions, …

Evaluation Of Transitions For Testing Agricultural Ventilation Fans With The Fan Assessment Numeration System (Fans), Igor Moreira Lopes

Theses and Dissertations--Biosystems and Agricultural Engineering

The Fan Assessment Numeration System (FANS) is an improved air velocity traverse method for measuring in situ fan performance. The FANS has been widely used, but variations of its test procedure are commonly employed to accommodate physical or operational barriers encountered in the field. This laboratory study evaluated the use of transitions to connect a 1.37m FANS unit to two smaller fans (1.22m and 0.91m diameter) and one 1.37m diameter fan. Tests were conducted with the FANS unit positioned on both intake and discharge sides of the fans. Three different transition angles (30^o, 45^o and 60^{o …}

Development Of A Noncontact Sensor For Monitoring Milk Coagulation And Cutting Time Prediction In Cheese Making, Molly D. Craft-Jenkins

Theses and Dissertations--Biosystems and Agricultural Engineering

Cheese products are manufactured more consistently and with better quality if the curd cutting time can be consistently selected. An optical sensor that accurately predicts cutting time has been developed for large cheese vats, but the initial cost of these sensors makes them uneconomical for small artisan cheese manufacturers. The small artisan cheese vats require an inexpensive sensor technology that can be implemented simply. The initial cost of purchasing a sensor and installing these sensors plus the need for a computational program for implementing the algorithm make this technology excessively expensive for these smaller cheese manufacturers. The objective of this …

Evaluation Of Separation Method Additives For The Recovery Of Bacteria From Food Matrices, Jennifer Leanne Frederick

Theses and Dissertations--Biosystems and Agricultural Engineering

The microbiological testing of foods is a well-established science. Due to the severity of foodborne pathogen illnesses, the widespread use and implementation of rapid detection methods in food testing labs is increasingly important. The first step for successful testing is sampling. Surfactants have been highly used in food microbiology, but there is not much, if any, published research about the use of fatty alcohols and chemical dispersants as aids in microbial separation. The microbial extraction efficiency of Escherichia coli K12 and Listeria innocua from hot dogs, spinach, and milk was measured using chemical additives (surfactants, fatty alcohols, and a chemical …

Computational Tools For Improving Route Planning In Agricultural Field Operations, Rodrigo S. Zandonadi

Theses and Dissertations--Biosystems and Agricultural Engineering

In farming operation, machinery represents a major cost; therefore, good fleet management can have a great impact on the producer’s profit, especially considering the increasing costs of fuel and production inputs in recent years. One of the tasks to be accomplished in order to improve fleet management is planning the path that the machine should take to cover the field while working. Information such as distance traveled, time and fuel consumption as well as agricultural inputs wasted due to off-target-application areas are crucial in the path planning process. Parameters such as field boundary size and geometry, machine total width as …

Evaluating The Effectiveness Of Weep Berm Systems For Treating Runoff From A Horse Muck Composting Operation, Ross L. Guffey

Theses and Dissertations--Biosystems and Agricultural Engineering

Two contour weep berms systems were designed and implemented to evaluate their performance at mitigating water quantity problems from a horse muck composting operation. The field-scale study focused on the hydrologic response of a standard contour weep berm and a modified contour weep berm. The modified contour weep berm incorporated a woodchip trench upgradient of a typical standard contour weep design. Monitoring occurred from July 2011 through spring 2012. Eight storm events produced measureable runoff for the standard contour weep berm; however, only five storm events produced measurable runoff for the modified contour weep berm. The largest storm event occurred …

Development And Deployment Of A Bioreactor For The Removal Of Sulfate And Manganese From Circumneutral Coal Mine Drainage, C. B. Mastin, J. D. Edwards, Christopher D. Barton, Anastasios D. Karathanasis, Carmen T. Agouridis, Richard C. Warner

Forestry and Natural Resources Faculty Publications

Surface mining, in the form of contour mining and mountain-top removal, is a common means for retrieving coal in the Appalachian Coal Belt region of Kentucky. Overburden or excess spoil generated by these two methods is placed in valley fills. Traditionally Constructed fills have been shown to adversely impact headwater ecosystems via stream burial and through alterations to the hydrology, sediment supply, water quality and biological composition of downstream reaches. Mine drainages emanating from the toe of valley fills often contain elevated levels of total dissolved solids and heavy metals. Drainage chemistry from Guy Cove, a valley fill located in …

Evaluation Of Algae Concentration In Manure Based Media, Maira Freire Pecegueiro Do Amaral

Theses and Dissertations--Biosystems and Agricultural Engineering

Algae can be used to treat wastewater and manure while producing a feedstock for renewable energy. Algae require nutrients to achieve their maximum growth and manure could provide those nutrients, thereby reducing the cost of algae production and the impact of manure treatment. Algae concentration during cultivation is a critical variable that is difficult to measure due to the high concentration of suspended solids present in manure. This dissertation addresses methods to measure algae concentration in the presence of manure solids.

Quantifying the algae concentration gravimetrically or by optical density was unreliable due to manure solids interfering with the measurement. …

Bankfull Hydraulic Geometry Relationships For The Inner And Outer Bluegrass Regions Of Kentucky, Carmen Agouridis, Ruth Roseann Brockman, Stephen R. Workman, Lindell E. Ormsbee, Alex Fogle

Biosystems and Agricultural Engineering Faculty Publications

Bankfull hydraulic geometry relationships relate bankfull stream dimensions, such as cross-sectional area, width, mean depth, mean velocity, width to depth ratio, and slope to bankfull discharge. These relationships can assist in determining a design discharge for stream restoration and management projects. This study assessed 27 stable streams located in the Inner Bluegrass and Outer Bluegrass regions of Kentucky. Reaches were selected based on the presence of a U.S. Geological Survey gage, as well as other conditions such as presence of readily identifiable bankfull indicators, stability indices, and site accessibility. Bankfull channel dimensions and discharges were determined, and hydraulic geometry relationships …

Biofilter Media Characterization Using Water Sorption Isotherms, Guilherme Del Nero Maia, George B. Day, Richard S. Gates, Joseph L. Taraba

Biosystems and Agricultural Engineering Faculty Publications

Compost material has been used extensively as a gas‐phase biofilter media for contaminant gas treatment in recent years. One of the biggest challenges in the use of this type of material is adequate control of compost moisture content and understanding its effect on the biofiltration process. The present work provides a methodology for characterization of biofilter media under low moisture conditions. Results indicated that low levels of equilibrium moisture content (EMC) were obtained for high levels of equilibrium relative humidity (ERH), i.e., 99% ERH produced EMC of approximately 20% (dry basis) at 25° C. Most bacteria struggle to survive in …