Bioresource and Agricultural Engineering Commons^™

A Simple Method To Improve Autonomous Gps Positioning For Tractors, Jaime Gomez-Gil, Sergio Alonso-Garcia, Francisco Javier Gómez-Gil, Tim Stombaugh

Biosystems and Agricultural Engineering Faculty Publications

Error is always present in the GPS guidance of a tractor along a desired trajectory. One way to reduce GPS guidance error is by improving the tractor positioning. The most commonly used ways to do this are either by employing more precise GPS receivers and differential corrections or by employing GPS together with some other local positioning systems such as electronic compasses or Inertial Navigation Systems (INS). However, both are complex and expensive solutions. In contrast, this article presents a simple and low cost method to improve tractor positioning when only a GPS receiver is used as the positioning sensor. …

Online, Continuous Sensor And Method For Curd Moisture Content Control In Cheese Making, Manuel Castillo, Colette C. Fagan, Colm P. O'Donnell, Donal J. O'Callaghan, Frederick Alan Payne

Biosystems and Agricultural Engineering Faculty Patents

A method is provided for improving quality of cheese produced from a milk batch. A light beam from an incident light source impinges onto a surface of the milk batch, and light backscatter is optically detected during a coagulation process and correlated to an optimum cutting time for the milk coagulum. Next, light backscattered from a curd and whey mixture derived from the milk batch during a syneresis process is optically detected and correlated to an optimum syneresis endpoint. At least one of the backscattered light data, optical parameters developed from analysis of the backscattered light data, and whey fat …

Security Monitoring System For A Bulk Foodstuff Transport Container, Christopher Dwight Thompson, Suraj M. Alexander, William L. Christ, Brian D. Luck, James Ryan Moore, Jonathan C. Paschal, Frederick Payne, Timothy S. Stombaugh, Nasrin Tabayehnejad, Phillip C. Womble

Biosystems and Agricultural Engineering Faculty Patents

A security monitoring system provides for the secure transport of a bulk foodstuff container. The system includes an electromechanical locking mechanism allowing access by only authorized persons, a positional locator for determining the geographical position of the bulk foodstuff transport container, and a controller associated with the transport container. The controller controls operation of the electromechanical locking mechanism, stores data received from the electromechanical locking mechanism and the positional locator, and communicates with a remote data processor in near real time. A handheld user interface device is configured to control operation of the controller, to process and store data received …

Method Of Improving Cheese Quality, Colm D. Everard, Donal J. O'Callaghan, Colm P. O'Donnell, Colleen C. Fagan, Manuel Castillo, Frederick Alan Payne

Biosystems and Agricultural Engineering Faculty Patents

A method is provided for improving the quality of cheese produced from a curd and whey mixture. The method comprises the steps of monitoring the curd and whey mixture during syneresis processing to collect color data, comparing the color data to a predetermined standard and terminating syneresis when the color meets the predetermined standard or, alternatively, analyzing the color data obtained to generate kinetic parameters that can be used to predict the end point of syneresis to improve control of curd moisture content.

Effect Of Additive On The Performance Characteristics Of Centrifugal And Progressive Cavity Slurry Pumps With High Concentration Fly Ash Slurries, Sunil Chandel, S.N. Singh, V. Seshadri

Coal Combustion and Gasification Products Journal Archive

Slurry pumps that are used in the hydraulic transportation of fly ash slurries through pipes in thermal power plants can be broadly classified into two main categories namely positive displacement and centrifugal pumps. The two types of pumps differ considerably in construction as well as in operating principle compared to the conventional pumps. The present study reports the effect of additive on the performance characteristics of centrifugal and progressive cavity screw pumps with fly ash slurries at high concentrations (above Cw < 50% by weight). Mixture of sodium carbonate and Henko detergent (5:1) at a concentration of 0.2% by weight has been used as an additive. For each type of pump, the effect of additive on the performance characteristics has been experimentally evaluated at rated speed with fly ash slurries in the concentration range of 50 to 70% by weight. The pump total head, overall efficiency and pump input power as a function of flow rate have been measured. The results obtained from the centrifugal slurry pump performance show that at rated speed, the performance of the pump improves with the addition of drag reducing additive. In the case of progressive cavity screw pump, pump performance characteristics and behavior were completely different as compared to the centrifugal slurry pump. At rated speed, the performance of screw pump deteriorates with the addition of drag reducing soap solution.

Zinc Speciation In Power Plant Burning Mixtures Of Coal And Tires, Luis F.O. Silva, Marcos L.S. Oliveira, Carmen Serra, James C. Hower

Coal Combustion and Gasification Products Journal Archive

Fly ash from the cyclone-boiler co-combustion of high-S, high volatile bituminous coal and tire-derived fuel (tdf) was studied using a variety of chemical, optical, and microbeam techniques. Fly ash, dominated by Al-Si glass with lesser amounts of coalderived carbons, Fe-spinels, and tire-derived carbons, has Zn concentrations ranging from 2200 ppm (1st ESP row) to 6900 ppm Zn (3rd ESP row). Zinc occurs in Zn-rich nanoparticles in the Al-Si glass phases and as ZnO in amorphous and crystalline nanominerals, Fe- and Zn-sulfides, Pb-Al-Fe sulfates, and Zn sulfates. Iron-rich, Al- and Ti-bearing spinels contain accessory Zn2+,Cr3+,Mn2+, and Pb2+. Fe-sulfates and phosphates nanoparticles …

Co-Disposal Of Dry Fgd By-Product With Coal Gasification Ash And Inorganic Brines, Jabulani S. Mahlaba, P.C. Pretorius, Subal Maharajh, M.P. Augustyn

Coal Combustion and Gasification Products Journal Archive

There is a growing pressure from the environmental authorities and public bodies to reduce anthropogenic pollution. Stringent environmental legislation is being implemented for industries around the world, even more so for coal consuming industries. Control of gaseous emissions is one of the areas that are receiving considerable attention towards sustainable development. Coal combustion in coal-fired power utilities emits SO~x~ to the atmosphere. Dry flue gas desulphurisation (FGD) is a well known technology often used to mitigate sulphur emissions in coal-fired power utilities. It traditionally uses lime to neutralise SO~x~, and forms a mixture of anhydrite (CaSO~4~), and calcium sulphite (CaSO~3~). …

A Multi-Analytical Approach To Understand The Chemistry Of Fe-Minerals In Feed Coals And Ashes, Marcos L.S. Oliveira, Frans Waanders, Luis F.O. Silva, Andre Jasper, Carlos H. Sampaio, Dursman Mchabe, Rachel S. Hatch, James C. Hower

Coal Combustion and Gasification Products Journal Archive

Seven feed coals used in the Brazilian power generation industry were obtained and subsequently analysed together with fly ash and bottom ash from a major Brazilian power plant. The samples were investigated by means of room temperature FeMo¨ssbauer analyses, X-ray diffraction, Raman spectroscopy, scanning electron microscope and petrographic analysis. In addition, nanometer-sized crystalline phases in coals and ashes were characterised using an energy-dispersive X-ray spectrometer and a high-resolution transmission electron microscope. The major identified Fe-bearing minerals in the coals were found to be actinolite, ankerite, chalcopyrite, chlorite, goethite, illite, ilmenite, magnesioferrite, natrojarosite, pyrite, pyrrhotite, and siderite; whilst in the fly …

Compositional Variations In Pilot Gasifier And Laboratory-Produced Slags And Their Impacts On Slag Viscosity And Coal Assessment, Alexander Ilyushechkin, Daniel Roberts, David Harris

Coal Combustion and Gasification Products Journal Archive

The flow behaviour of coal mineral matter at high temperatures is an important parameter for coal use in entrained-flow gasification technologies. Recently, gasification performance data was obtained from a series of pilot-scale gasification tests on a suite of well-characterised Australian black coals. Evaluation of the results of the pilot tests and the detailed laboratory investigations provided the opportunity for evaluation of the practical applicability of different laboratory and modelling techniques for coal assessment in terms of mineral matter behaviour in entrained flow gasification. A series of viscosity measurements was made over the range 1200–1600uC using slags produced in a pilot …

Compaction Of High-Ca Fly Ash-Al- And Al-Alloy-Composites: Evaluation Of Their Microstructure And Tribological Performance, Grigorios Itskos, Angeliki Moutsatsou, Pradeep K. Rohatgi, Nikolaos Koukouzas, Charalampos Vasilatos, Eleni Katsika

Coal Combustion and Gasification Products Journal Archive

In this study, highly calcareous and siliceous fly ash particles were utilized for the fabrication of Al- and Al-alloy-based MetalMatrix Composites (MMCs) by means of powder metallurgy. After compacting and sintering Al and Al/Si powders containing 10, 15, and 20wt. % ash particles, the homogenous (and with minimal amount of voids) microstructure of the produced composites was verified by means of Scanning Electron Microscopy (SEM). The composites were tested for their dry sliding wear behavior using a pin-on-disc machine against spheres of alumina. The worn surfaces of composites were then examined by using SEM and Energy Dispersive X-Ray Spectroscopy (EDS). …

Influence Of Chemical Reagents On Rheological Properties Of Fly Ash-Water Slurry At Varying Temperature Environment, H.K. Nail, M.K. Mishra, Karanam U.M. Rao

Coal Combustion and Gasification Products Journal Archive

About 70% of total electrical energy is generated from thermal power plants in India which in turn release about 160 Mt of fly ash as solid waste annually. Transportation and disposal of such a huge amount of fly ash is a major problem faced by the power plants. Presently fly ash is transported as lean slurry in pipe lines requiring about 80 to 85% of water with high energy input. A major impediment in high volume transportation of fly ash is its high specific gravity as compared to that of water. The objective of the present study was to evaluate …

Impact Of Manufactured Coal Ash Aggregates On Water Quality During Open Pit Restoration: 1. A Statistical Screening Test, Sangchul Hwang, Isomar Latorre

Coal Combustion and Gasification Products Journal Archive

Utilization of manufactured coal ash aggregates (MAs) as a subsoil substitute during restoration of an open pit was assessed in a three-factor, two-level factorial analysis. The factors of interest were the MA application rate (2:1 or 1:2 topsoil/MA volume ratio), rainfall intensity (high or low), and aggregate size (2.36–4.75 mm or 4.75–9.53 mm). Among the water quality parameters examined (pH, turbidity, heavy metal content (lead and cadmium), conductivity, and hardness), the last two parameters were significantly higher (p,0.05) in soil amended with MAs than in a control reactor using sand. A low rainfall intensity and larger aggregate size resulted in …

The Leachability Of Major Elements At Different Stages Of Weathering In Dry Disposed Coal Fly Ash, S.A. Akinyemi, A. Akinlua, W.M. Gitari, R.O. Akinyeye, L.F. Petrik

Coal Combustion and Gasification Products Journal Archive

Large quantities of solid residue are generated by coal-fired power stations in many parts of the World. The disposal and management of the unused fly ash remains a major problem to the environment. The weathered dry disposed ash cores comprise of major element constituents such as Al, Si, Ca, Mg, Fe, Mn, Na+ and K+. The mobility patterns and mineralogical associations of major elements in weathered dry disposed ash dumps aged 1-year-old, 8-year-old and 20-year-old from a coalfired power station in South Africa were investigated using a modified sequential extraction scheme. The extraction sequence was as follows: (1) water soluble, …

A Computational Tool For Estimating Off-Target Application Areas In Agricultural Fields, Rodrigo S. Zandonadi, Joe D. Luck, Timothy S. Stombaugh, Michael P. Sama, Scott A. Shearer

Biosystems and Agricultural Engineering Faculty Publications

A computational method for estimating off-target application areas based on the machine-controlled section width and the field shape was developed and implemented in software with a graphical user interface written in the MatLab environment. The program, which is called the Field Coverage Analysis Tool (FieldCAT), includes three modules: data import, data preparation, and coverage analysis. Nine field boundaries were evaluated to test the software using controlled section widths from 0.5 to 27 m and various swath orientations. The estimated off-target application area from the widest section width varied from 9% to 24% depending on the shape and size of the …

Mathematical Modeling Of Clostridium Thermocellum’S Metabolic Responses To Environmental Perturbation, Bless Adotey

Theses and Dissertations--Biosystems and Agricultural Engineering

Clostridium thermocellum is a thermophilic anaerobe that is capable of producing ethanol directly from lignocellulosic compounds, however this organism suffers from low ethanol tolerance and low ethanol yields. In vivo mathematical modeling studies based on steady state traditional metabolic flux analysis, metabolic control analysis, transient and steady states’ flux spectrum analysis (FSA) were conducted on C. thermocellum’s central metabolism. The models were developed in Matrix Laboratory software ( MATLAB^® (The Language of Technical Computing), R2008b, Version 7.7.0.471)) based on known stoichiometry from C. thermocellum pathway and known physical constraints. Growth on cellobiose from Metabolic flux analysis (MFA) and Metabolic …

Evaluating Algal Growth At Different Temperatures, Keelin Owen Cassidy

Theses and Dissertations--Biosystems and Agricultural Engineering

In recent years, there has been a concern for the amount of carbon dioxide released into the atmosphere and how it will be captured. One way to capture carbon dioxide is with algae. In this study, algae's growth was measured at different temperatures. The first part of the study was to grow Scenedesmus and Chlorella with M8 or urea growth media at a temperature of 25, 30 or 35ºC. It was found that 30ºC had the best growth rates for both algae. The second part studied Scenedesmus growth with urea, more in-depth, and found the optimum growth temperature to be …

Particulate Organic Carbon Fate And Transport In A Lowland, Temperate Watershed, William Isaac Ford Iii

University of Kentucky Master's Theses

Small lowland agricultural systems promote conditions where benthic biological communities can thrive. These biogeochemical processes have significant impacts on terrestrial ecosystem processes including POC flux and fate, nutrient balances, water quality budges, and aquatic biological functioning. Limited information is available on coupled biological and hydrologic processes in fluvial systems. This study investigates the mixture of biological and hydrologic processes in the benthic layer in order to understand POC cycling in the South Elkhorn system. Further, comprehensive modeling of POC flux in lowland systems has not been performed previously and the behavior of potentially controlling variables, such as hydrologic forcing and …

Development Of A Semi-Automated Tobacco Stripping Machine Utilizing String Trimmers, Robert George Sperry

University of Kentucky Master's Theses

Conventional stripping of burley tobacco is labor intensive and typically requires 50 to 75 worker hours per acre (wkr•hr/ac). The goal of the project was to reduce labor by optimizing leaf removal by string trimmer heads using combinations of strings lengths and motor speeds. In tests conducted on a single grade, all leaves outside the grade were removed by hand. Plants were run through the machine for sting lengths of 5, 7 and 9 inches and associated motor speeds which were monitored and recorded. Stripping efficiencies were calculated for each plant and collectively for each set of four plants. The …

Optimization Of Coagulation And Syneresis Processes In Cheesemaking Using A Light Backscatter Sensor Technology, Tatiana Gravena Ferreira

University of Kentucky Master's Theses

Curd syneresis, a critical step in cheesemaking, directly influences the quality of cheese. The syneresis process is empirically controlled in cheese manufacturing plants. A sensor technology for this step would improve process control and enhance cheese quality. A light backscatter sensor with a Large Field of View (LFV) was tested using a central composite design over a broad range of cheese process conditions including milk pH, calcium chloride addition level, milk fat to protein ratio, temperature, and a cutting time factor (β). The research objectives were to determine if the LFV sensor could monitor coagulation and syneresis steps …

Influence Of Fan Operation On Fan Assessment Numeration System (Fans) Test Results, Gabriela Munhoz Morello

University of Kentucky Master's Theses

The use of velocity traverses to measure in-situ air flow rate of ventilation fans can be subject to significant errors. The Fan Assessment Numeration System (FANS) was developed by the USD-ARS Southern Poultry Research Laboratory and refined at the University of Kentucky to measure air flow of fans in-situ. The procedures for using the FANS unit to test fans in-situ are not completely standardized. This study evaluated the effect of operating fan positions relative to the FANS unit for ten 1.22 m diameter fans in two types of poultry barns, with fans placed immediately next to each other and …

Polarized Light Based Scheme To Monitor Column Performance In A Continuous Foam Fractionation Column, Janakiraman N. Swamy, Czarena L. Crofcheck, M.P. Mengüç

Biosystems and Agricultural Engineering Faculty Publications

BACKGROUND: A polarized light scattering technique was used to monitor the performance of a continuously operated foam fractionation process. The S11 and S12 parameters, elements of the light scattering matrix, combined together (S11+S12) have been correlated with the bubble size and liquid content for the case of a freely draining foam. The performance of a foam fractionation column is known to have a strong dependence on the bubble size distribution and liquid hold up in foam. In this study the enrichment is used as a metric, representative of foam properties and column performance, and correlated to the S11+S12 parameter.

RESULTS: …

Testing Of Interactions Between Coal Ash Leachates And Rock Materials For Mine Backfill Evaluations, Colin R. Ward, David French, Leanne Stephenson, Ken Riley, Zhongsheng Li

Coal Combustion and Gasification Products Journal Archive

A series of laboratory-based leaching tests has been developed to evaluate the chemical interaction between ash, water and different mine-site rock materials, as a basis for assessing the potential environmental impact of using coal ash as backfill in coal mines. Two different test protocols were used: a two-stage serial batch testing program in which leachate from representative ash samples were allowed to interact separately with relevant rock materials under laboratory conditions, and a single-stage mixed batch testing program in which 50:50 mixtures of the same ashes and rock samples were extracted with water following a similar procedure to leaching tests …

Laboratory Performance Of A Mass Flow Sensor For Dry Edible Bean Harvesters, Rodrigo S. Zandonadi, Timothy S. Stombaugh, Scott A. Shearer, Daniel M. Queiroz, Michael P. Sama

Biosystems and Agricultural Engineering Faculty Publications

Due to the importance of yield monitoring, researchers have been developing systems for crops such as tomatoes, forage, sugar cane, citrus, and coffee. A yield monitoring system for pull type dry edible beans harvester has not yet been developed. The goal of this project was to design and test a drive torque measurement device on a clean grain bucket elevator of a dry bean harvester, and evaluate its potential to be used as a mass flow sensor. Tests were conducted in the Yield Monitor Test Facility (YMTF) of University of Kentucky following the recommendation of ASABE Standard S578 (2007) The …

Chemistry Of Coal And Coal Combustion Products From Kentucky Power Plants: Results From The 2007 Sampling, With Emphasis On Selenium, James C. Hower, Thomas L. Robl, Gerald A. Thomas, Shelley D. Hopps, Margaret Grider

Coal Combustion and Gasification Products Journal Archive

Kentucky produced over 8 Mt of coal combustion products (CCPs) in 2006, with 30% of the CCPs being utilized, a significant increase from our 1996 and 2001 surveys. As much of the increase is related to increased utilization of flue-gas desulfurization (FGD) gypsum, the increased production of FGD gypsum coincident with the commissioning of new FGD units and the saturation of the (currently) weak market for new construction, the percentage of utilization may decrease by the time of the next planned survey (2011). The concentration of volatile trace elements in the feed coal and in the pulverizer reject, while associated …

An Investigation Of The Behavior Of Raw Calcareous Fly Ash In Mortar Mixtures, Ioanna Papayianni, Eleftherios K. Anastasiou

Coal Combustion and Gasification Products Journal Archive

The behavior of unprocessed calcareous fly ash in cement mortar mixtures is often questionable and unpredictable and that is one of the difficulties in confining these fly ashes within the limits of standards. This work aims at correlating the material characteristics with its behavior in mortar mixtures. An effort is made to understand how three of the reactive constituents; lime (CaO), silica (SiO2), and sulfates (SO3), affect strength and volume stability. Two raw calcareous fly ashes of different composition emanating from the Ptolemaida area, Greece, were systematically tested to define their profile as cementitious agents that could be incorporated in …

Coal Fired Power Station Ash Products And Eu Regulation, Lindon K.A. Sear

Coal Combustion and Gasification Products Journal Archive

The UK has a long history of the use of coal fired power station ash products in a range of applications in construction. These range from use in concrete as a cementitious material through to its use as a fill material in embankments. While there have been no environmental problems associated with these uses, environmental regulations emanating from the European Union (EU) are increasingly impacting on the use of these materials. Unfortunately it is not a single set of regulations that are being applied, but three separate and apparently disconnected initiatives; these are Registration, Evaluation and Authorisation of Chemicals (REACH), …

Enriched Coal Ash Utilization For Augmenting Production Of Rice Under Acid Lateritic Soil, S. Karmakar, B.N. Mittra, B.C. Ghosh

Coal Combustion and Gasification Products Journal Archive

The use of industrial wastes such as fly ash (FA) or rice husk ash (RHA), along with paper factory sludge (PFS), farmyard manure (FYM), and chemical fertilizers (CF), under integrated nutrient management, was studied in acid lateritic soil on rice. Application of combined fertilization sources increased growth, yield attributes, and yield (up to 92.3 and 9.7% over control and CF, respectively) of wet season rice. The uptake of N, P, K, Ca, Mg, Fe, Mn, Zn, Cu, and Co was increased under combined fertilization sources. The study also indicated that such integrated plant nutrition system improved physico-chemical properties of soil …

Erosive Wear In Pipelines At Pneumatic Conveying Of Fine Silicon-Containing Materials, Viacheslav Y. Putilov, Vijay K. Agarwal, Irina V. Putilova

Coal Combustion and Gasification Products Journal Archive

Erosive wear is a major operational problem in conveying of hard abrasive bulk materials like silica sand, fly ash, coal dust, etc., in pneumatic conveying systems. Erosion results in emergency downtime of pneumatic conveying installations of ash and slag removal and dust-preparation systems at TPPs caused by holes in pipelines. That leads to worsening of technical, economic, and ecological parameters of thermal power plants as a whole. In MPEI, a model of estimating erosion of rectilinear and curvilinear sections of pneumatic conveying pipelines has been developed. To validate the estimating model developed in the MPEI, experimental investigations in the Indian …

Evaluation Of The Variables That Influence Mercury Capture In Solid Sorbents, M. Antonia Lopez-Anton, Patricia Abad-Valle, Mercedes Diaz-Somoano, M. Rosa Martinez-Tarazona

Coal Combustion and Gasification Products Journal Archive

Newly obtained results on mercury retention in fly ashes and activated carbons during coal combustion are compared with previous findings. The influence of different variables on mercury capture, including the composition and nature of the sorbents, the composition of the flue gas and the mercury species in gas phase is investigated. Coal-fired utility boilers are currently the largest single-known source of mercury emissions. According to the USEPA’s Information Collection Request (ICR), on average, only 40% of the mercury entering a coal-fired power plant is captured, while 60% is emitted into the atmosphere. Several solid materials, including activated carbons, are considered …

Mechanical Performance Of Pavement Geomaterials Stabilized With Fly Ash In Field Applications, Lin Li, Tuncer B. Edil, Craig H. Benson

Coal Combustion and Gasification Products Journal Archive

This paper describes an evaluation of the mechanical performance of fly ash stabilized materials. Soft clay soil, asphaltic recycled pavement material (RPM), and road-surface gravel (RSG) were stabilized using Class C and off-specification fly ashes to create working platforms or stabilized base courses for construction of flexible and rigid pavements at six sites in Wisconsin and Minnesota. California bearing ratio (CBR), resilient modulus (Mr) tests, and unconfined compression (qu) tests were conducted on the subgrade soil, RPM, and RSG alone and on mixtures prepared in the field and the laboratory to evaluate improvements in bearing resistance and stiffness. Fly ash …