Other Biomedical Engineering and Bioengineering Commons^™

Assessing Functional Vasodilation In The Gracilis Collateral Arteriole, Megan T. Chu

Biomedical Engineering

Peripheral arterial occlusive disease (PAOD) involves arterial occlusion due to the formation of atherosclerotic plaques. It is suggested that intermittent claudication, the most frequent clinical presentation of PAOD, is caused by impaired vasodilation. Current treatments for PAOD are not directed at improving vascular reactivity and are often insufficient. Stimulating arteriogenesis in collateral arterioles has therapeutic potential for PAOD, but because arterioles are the primary site of blood flow resistance, it is important that these treatments do not impair collateral vasodilation. Before this can be evaluated, the effects of arteriogenesis on collateral function must be studied in untreated collaterals. There is …

Measuring Blood Flow In The Skeletal Muscle Microcirculation Using Laser Speckle Flowmetry, Kenneth Howard Gouin Iii

Biomedical Engineering

The presence of a native collateral circulation, which serves as a natural bypass for blood flow around an occlusion, improves prognosis for patients with ischemic diseases, such as peripheral arterial occlusive disease (PAOD). However, not all patients have a native collateral circulation, and animal models suggest a genetic basis for this variability. In mice, such as the BALB/c, that lack native arteriolar collaterals, neocollateral formation from capillaries that connect two arterial trees can occur after arterial occlusion, resulting in reperfusion of the ischemic watershed. Immature arterialized collateral capillaries (ACCs) at 7 days post arterial occlusion do not vasodilate in response …

Design And Fabrication Techniques Of Devices For Embedded Power Active Contact Lens, Errol Heradio Leon

Master's Theses

This thesis designed and fabricated various devices that were interfaced to an IC for an active contact lens that notifies the user of an event by detection of an external wireless signal. The contact lens consisted of an embedded antenna providing communication with a 2.4GHz system, as well as inductive charging at an operating frequency of 13.56 MHz. The lens utilized a CBC005 5µAh thin film battery by Cymbet and a manufactured graphene super capacitor as a power source. The custom integrated circuit (IC) was designed using the On Semiconductor CMOS C5 0.6 µm process to manage …

Sapien3 Comb Stitch Improvement For Edwards Lifesciences, William Harley, Thomas Pluschkell, John Mctigue, Garrett Reed

Mechanical Engineering

The complete senior project report was submitted to the project advisor and sponsor. The results of this project are of a confidential nature and will not be published at this time.

Evaluating The Effectiveness Of Cranial Molding For Treatment Of Positional Plagiocephaly Using Finite Element Analysis, Maziyar Keshtgar

Master's Theses

Since the advent of recommendations for placing infants in the supine position during sleep to reduce the incidence of sudden infant death syndrome, clinicians have noted an increase in the frequency of cranial asymmetry due to deformation of suture sections of the infants’ skulls as a result of constant concentrated stress in one area at the back of their head. This specific form of cranial deformation is known as positional plagiocephaly and its rate of occurrence has increased from 0.3% in 8.2% within the past 30 years.

Current treatments and methodologies for preventing and correcting positional plagiocephaly such as stretching …

Smooth Muscle Cell Organization In The Stem Region Of The Gracilis Collateral Circulation In Balb/C Mice, Laura Lenae Burckhardt

Biomedical Engineering

Of the approximately 8 million Americans who suffer from ischemic peripheral arterial occlusive disease (PAOD), many present with intermittent claudication, or pain associated with exercise. Impaired vasodilation of resistance vessels is a potential explanation for this symptom. Occluded arteries can lead to increased flow through collateral vessels, which function as natural bypasses around the obstruction. This increase in blood flow and resulting shear stress can cause outward remodeling, or arteriogenesis, which improves the efficacy of collaterals. However, following femoral artery ligation in a mouse model of chronic ischemia, vasodilation in the stem region of collateral vessels is impaired at day …

The Effect Of Artery Bifurcation Angles On Fluid Flow And Wall Shear Stress In The Middle Cerebral Artery, Zachary Ramey Jones

Master's Theses

Saccular aneurysms are the abnormal plastic deformation of veins and arteries that can lead to lethal thrombus genesis or internal hemorrhaging. Medication and surgery greatly reduce the mortality rates, but treatment is limited by predicting who will develop aneurysms. A common location for saccular aneurysm genesis is at the main middle cerebral artery (MCA) bifurcation. The main MCA bifurcation is comprised of the M1 MCA segment, parent artery, and two M2 segments, daughter arteries. Studies have found that the lateral angle (LA) ratio of the MCA bifurcation is correlated with aneurysm formation. The LA ratio is defined as the angle …

Design, Characterization And Application Of A Multiple Input Stethoscope Apparatus, Spencer Geng Wong

Master's Theses

For this project, the design, implementation, characterization, calibration and possible applications of a multiple transducer stethoscope apparatus were investigated. The multi-transducer sensor array design consists of five standard stethoscope diaphragms mounted to a rigid frame for a-priori knowledge of their relative spatial locations in the x-y plane, with compliant z-direction positioning to ensure good contact and pressure against the subject’s skin for reliable acoustic coupling. When this apparatus is properly placed on the body, it can digitally capture the same important body sounds investigated with standard acoustic stethoscopes; especially heart sounds. Acoustic signal inputs from each diaphragm are converted to …

Nerve Fiber Diameter Measurements Using Hematoxylin And Eosin Staining And Brightfield Microscopy To Assess The Novel Method Of Characterizing Peripheral Nerve Fiber Distributions By Group Delay, Jorge Arturo Vazquez

Master's Theses

Peripheral neuropathies are a set of common diseases that affect the peripheral nervous system, causing damage to vital connections between various parts of the body and the brain and spinal cord. Different clinical conditions are known to selectively impact various size nerve fibers, which often makes it difficult to diagnose which peripheral neuropathy a patient might have. The nerve conduction velocity diagnostic test provides clinically useful information in the diagnosis of some peripheral neuropathies. This method is advantageous because it tends to be minimally invasive yet it provides valuable diagnostic information. However, this test does not determine characteristics of peripheral …

Developent Of A Phospholipid Encapsulation Process For Quantum Dots To Be Used In Biologic Applications, Logan Grimes

Master's Theses

The American Cancer Society predicts that 1,665,540 people will be diagnosed with cancer, and 585,720 people will die from cancer in 2014. One of the most common types of cancer in the United States is skin cancer. Melanoma alone is predicted to account for 10,000 of the cancer related deaths in 2014. As a highly mobile and aggressive form of cancer, melanoma is difficult to fight once it has metastasized through the body. Early detection in such varieties of cancer is critical in improving survival rates in afflicted patients. Present methods of detection rely on visual examination of suspicious regions …

Team Omnimouse, Derek J. Halman, Josh B. Porter, Steven A. Silver, Ian S. Stemper

Computer Engineering

INFORMATION, DATA, FIGURES AND DRAWINGS EMBODIED IN THIS DOCUMENT ARE STRICTLY CONFIDENTIAL AND ARE SUPPLIED ON THE UNDERSTANDING THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT THE PRIOR WRITTEN CONSENT OF QUALITY OF LIFE PLUS.

Material Differences In Equine Cortical And Trabecular Bone, Ryan B. Allen

Master's Theses

A greater understanding of bone materials would be beneficial in creating more accurate computer models and in the making of biomedical products involving bone. This study set out to determine whether cortical and trabecular bone are two separate materials, or whether they are the same material with a variance in porosity. To answer this question, samples were taken from different sections of the equine metacarpus, underwent densitometry analysis and were statistically analyzed. The majority of results suggest that the material is the same between varying densities of bone and thus the same between cortical and trabecular bone. These particular results …

Mechanical Properties Of Bone Due To Sost Expression: Nanoindentation Assessment Of Murine Femurs, Amir Rafie

Master's Theses

In the human genome, the SOST gene codes for a protein sclerostin. Sclerostin is an osteocyte-expressed negative regulator of bone formation. When the SOST gene is not coded, bone formation is reduced in individuals during skeletal maturation. This study utilizes nanoindentation methods to test for the mechanical properties of bones that both express and do not express the SOST gene. 100 transgenic murine femurs were obtained from Lawrence Livermore Labs in the form of 6 and 8 month SOST transgenic mice, 6 and 12 month SOST knockout mice, and wild type control littermates for each of the 4 age groups. …

An Analysis Of Eliminating Electroosmotic Flow In A Microfluidic Pdms Chip, Cecile D. Redington

Master's Theses

The goal of this project is to eliminate electroosmotic flow (EOF) in a microfluidic chip. EOF is a naturally occurring phenomenon at the fluid-surface interface in microfluidic chips when an electric field is applied across the fluid. When isoelectric focusing (IEF) is carried out to separate proteins based on their surface charge, the analytes must remain in the separation chamber, and not migrate to adjacent features in the microfluidic chip, which happens with EOF.

For this project, a microfluidic chip was designed and commissioned to be photolithographically transferred onto a Si wafer. A PDMS component was then casted on the …

Vascular Reactivity Of Immature Arterialized Capillaries, Sara Hellstrom

Biomedical Engineering

Peripheral arterial occlusive disease (PAOD) is a globally prevalent cardiovascular disease in which atherosclerotic plaques narrow arterial lumen diameters and restrict blood flow to down stream tissues. The impact of these occlusions can be mitigated by collateral vessels that connect parallel arterial branches and act as natural bypasses to maintain perfusion. Some patients with PAOD may not have robust collateral networks to accommodate ischemic tissues in the event of an occlusion and, therefore, may be more susceptible to hypoxia and tissue necrosis. In animal models that lack collateral arterioles, capillaries can arterialize and form functional collaterals; however, in the early …

A Lateral Flow Smart Phone Image Analysis Diagnostic, Christina Holly Tyrrell

Master's Theses

A low cost compact diagnostic has many implications in today’s society. Smart phone technology has exponentially grown and with it the imaging capabilities associated with smart phones. The goals of this research are i) to determine the feasibility of combining in the field smart phone images with color dependent assay results, ii) to develop a MatLab® image analysis code to analyze these results, and iii) compare limits of detection between the un-aided eye and MatLab® image analysis software.

Orange G dye is used to create a stock solution and subsequent titers for analysis. Autocad is used to design an assay …

Fluorescence Characterization Of Quantum Dots For Use As Biomarkers, Logan M. Grimes

Materials Engineering

Fluorescence profiles of quantum dots (QDs) were characterized to select the ideal QDs for encapsulation in phospholipids for use as biomarkers to selectively adhere to cancer cells. QDs were synthesized and extracted 0, 30, 60, and 90 seconds after precursor compounds were mixed. These extractions were isolated by extraction time. Portions from each vial were coated in a zinc sulfide shelling procedure, leaving at least half of the QD solution unshelled. These samples were characterized over four days to monitor fluctuations in fluorescence. This was done utilizing an Ocean Optics spectrometer in conjunction with Spectra Suite software. The central wavelength, …

Guidance System, Kayaking For The Visually Impaired, D. Ryan Kirtland, Ryan Phife, William Gardner, Amy Johnson

Biomedical Engineering

Quality Life Plus is working with Team River Runner to develop an assistive guidance system for veterans who want to remain active by kayaking, after sustaining an injury that impairs vision. This system allows these veterans to complete a slalom speed race independent of a personal guide in the water. The system incorporates 3 stations that each contain a speaker connected to a microcontroller system covered by a Pelican Case on a custom made buoy. During the slalom race, a kayaker will travel from shore towards buoy #1 as it omits sound from the speaker. As the kayaker moves around …

Design And Development Of A Stair Ascension Assistive Device For Transfemoral Amputees, Casey Michael Barbarino

Master's Theses

Transfemoral amputees around the world experience increased difficulty in climbing stairs due to lack of muscle, balance, and other factors. The loss of a lower limb greatly diminishes the amount of natural force generation provided that is necessary to propel oneself up stairs. This study investigated possible solutions to the problem of stair ascension for transfemoral amputees by the means of designing and developing an externally attachable device to a prosthesis. The number of amputations from military service has greatly increased since 2008, which shows there is a clear need for assistive devices (Wenke, Krueger, & Ficke, 2012). With the …

Effects Of Ovariectomy And Anatomical Location On Osteonal Encroachment In Adult Cortical Ovine Bone, Paige Brell Ryan

Master's Theses

The purpose of this study is to further quantify adult ovine ovariectomized bone for new remodeling characteristics to obtain a better understanding of how remodeling is occurring and the effectiveness of this animal model for the study of postmenopausal osteoporosis. Postmenopausal osteoporosis is a major health concern and animal models to test new treatment options are needed. The ovine model is a good option because the ewes undergo Haversian remodeling, are a large sized animal, and have a similar hormone profile to humans. Ewes, however, do not undergo a natural menopause, so an ovariectomy surgery was conducted in the sheep …

A Microfluidic Pretreatment Isoelectric Focusing Dc-Field Assisted H-Filter For The Separation Of Charged Particles, Cameron Sean Carroll

Biomedical Engineering

Microfluidic devices are small portable diagnostic chips that allow for analysis of a biologic sample at relatively low cost. This makes them ideal for settings where a hospital is unavailable. The microfluidic pretreatment isoelectric focusing DC-field assisted H-filter is a device that allows for the separation of differently charged particles in a biologic sample. It does this by employing the concepts of diffusion, electrophoresis, and isoelectric focusing. This is perfect for isolation of a desired analyte or separation of waste from a sample in order to achieve better diagnostic results. The device was first modeled mathematically and visually using Comsol. …

Nitrocellulose Paper Based Microfluidic Platform Development And Surface Functionalization With Anti-Ige Aptamers, Jennifer Guerin Ward

Master's Theses

The purpose of this thesis project was to demonstrate the ability to utilize the capabilities of aptamers so that they may act as capture reagents for paper microfluidic devices. Several characterization experiments were conducted as a precursor before the final experimentation was performed. Paper characterization, manufacturing protocols for printing and heating, as well as 3D chip fabrication were all performed and analyzed. The results confirmed that the control of fluid through a 3D microfluidic device based in nitrocellulose is possible.

For the biochemistry portion of this thesis report, antibodies and aptamers were chosen to react with IgE, an antibody that …

Comparing Anti-Vegf Antibodies And Aptamers On Paper Microfluidic-Based Platforms, Katherine Noel Clayton

Master's Theses

The field of microfluidics is expanding into what is known as paper microfluidics. This uses a paper platform rather than materials (i.e. PDMS, PMMA) that are commonly used in microfluidics research. Current devices require an expensive manufacturing process and external sources to power the device. Such devices are not practical in low resource environments. As a consequence, it is the goal of this Thesis to develop a three-dimensional, multiplexed assay chip using nitrocellulose membranes. This device comprises of multiple layers of nitrocellulose membranes with defined fluidic channels. The multiple layers are bound together using double backed tape, and imbedded between …

Characterization Of Raw Milk Fouling On Plate-Type Heat Exchangers Using Different Alloys And Cow Phenotypes, Stephen Ernest Nelson

Master's Theses

ABSTRACT

Characterization Of Raw Milk Fouling On Plate-Type Heat Exchangers Using Different Alloys And Cow PhenotypeS

Stephen Ernest Nelson

Milk and other dairy products are widely used in many households today. Milk is a popular beverage that is seen as a healthy alternative to other synthetic beverages such as soda pop and other sugar based drinks. It became law that milk, and milk products are pasteurized before its release to the general public (FDA 2003). Pasteurization is a thermal process where the intent is to lower the concentration of microorganisms in the milk to render it safe to drink with …

Development Of A Protocol To Measure Gene Expression In The Mouse Tibia, Daniel Hoover

Biomedical Engineering

Numerous molecular factors active in bone tissue direct fracture repair and remodeling which can be altered by disease conditions such as Peripheral Arterial Disease (PAD) and Osteoporosis. Methods of molecular biology are commonly applied to investigate the expression and role of these molecular factors. This project presents a robust three-step protocol for examining gene expression in the mouse tibia. The protocol begins with isolating RNA from a flash frozen tibia sample. The isolated RNA is reverse transcribed into cDNA. Finally, PCR is performed to indentify expressed genes. Establishing this protocol will allow further research into the mechanisms of bone remodeling …

A Kinetic Study Of Anti-Vegf-A Polyclonal Antibodies And Anti-Vegf-A Ssdna Aptamers, Heather A. Hedeen

Master's Theses

A new detection reagent that could possibly augment or replace antibodies research and diagnosis methods are aptamers. Aptamers are ssDNA, RNA or polypeptide constructs that function like active antibodies. Antibodies and aptamers both specifically bind to selected target molecules, and as such they enable the detection or targeting of the presence or absence of a specific antigen.

In order to ensure that ssDNA aptamers perform similarly to antibodies, anti-VEGF-A polyclonal antibody and anti-VEGF-A ssDNA aptamer were evaluated against vascular endothelial growth factor A (VEGF-A) using Surface Plasmon Resonance (SPR). It was hypothesized that the anti-VEGF-A aptamer had the same, if …

Hydraulically Driven Mechanical Representation Of A Biological System, Andrea Argouarch, Michael Mceachern, Brandon Parham

Biomedical Engineering

No abstract provided.

Improvement Of Statistical Process Control At St. Jude Medical's Cardiac Manufacturing Facility, Christopher Lance Edwards

Master's Theses

Sig sigma is a methodology where companies strive to reproduce results ending up having a 99.9996% chance their product will be void of defects. In order for companies to reach six sigma, statistical process control (SPC) needs to be introduced. SPC has many different tools associated with it, control charts being one of them. Control charts play a vital role in managing how a process is behaving. Control charts allow users to identify special causes, or shifts, and can therefore change the process to keep producing good products, free of defects.

There are many factories and manufacturing facilities having implemented …

A New Computational Model To Augment The Design Of Microfluidic Separations: Electric Field Assisted, Hydrodynamic Chromatography, Jeffrey D. Wells

Master's Theses

This project encompasses the implementation of a computational model to simulate the microfluidic separation of like-charged particles in a continuous flow environment. By accomplishing this task the model can be used to optimize future fractionations by tailoring the process parameters to the properties of the target particles. The primary goal of this project is to develop a vectorized code within Matlab® that captures a sufficient quantity of the physics in separations to assist with the optimization and design of microfluidic systems.

This project differs from other computational models in that it utilizes a personal computer to run the simulation in …

The Characterization Of Biofilm Attachment To Metal Interfaces: Effects Of Substratum Properties, Marcel D. Mendes

Master's Theses

Bacteria are among the most abundant microorganisms on earth, and can be found in essentially every environment. When a clean surface is exposed to media containing planktonic bacteria, the bacterial cells will attach to the surface and aggregate to form what is known as a biofilm. Biofilms have been shown to negatively affect many industries including medical, industrial, and food science applications. While biofilms have been well characterized from a microbiology perspective, there has been much less research from a materials science standpoint. It is hypothesized that the material properties of the substratum (such as the micro-structure) have a significant …