Biomaterials Commons^™

Application-Driven Materials Development Of Solid-State Conductive Composites Of Ultra-High Molecular Weight Polyethylene, Peder Solberg

Dartmouth College Ph.D Dissertations

Ultra-high molecular weight polyethylene (UHMWPE) is a linear long chain homopolymer valued for its toughness, wear resistance, and chemical inertness. In the medical field, these properties make it the material of choice for bearing surfaces despite recognized tradeoffs between wear resistance, toughness, and oxidation resistance. Electrically conductive composites of UHMWPE show promise to enable new types of smart and active load-bearing implants in a future of personalized medicine, if beneficial properties can be maintained with the addition of solid-state additives.

Clinical need-finding conducted through Dartmouth’s Training Program in Surgical Innovation revealed several potential applications for conductive, load-bearing polymers. These include: …

Investigation Using Single Point Incremental Forming (Spif) To Fabricate Patient-Specific, Titanium Orbital Floor Implants, Elizabeth M. Mamros, Lauren E. Blaha Md, Christian A. Kauffman Md

Faculty Conference Papers and Presentations

The floor of the human orbit is composed of thin bone that is prone to traumatic fracture. This leads to a loss of support for the eye, which can cause vision changes. Therefore, fractures may need surgical reconstruction using a thin, sheet-like implant. Titanium implants are available off-the-shelf in standard sizes, but fitting to each patient’s unique anatomy requires surgeons to cut, file, and bend these plates. This can be time-consuming and imprecise. To both save time and ensure a perfect fit for the patient, a custom plate can be created prior to surgery. This investigation focuses on single-point incremental …

Personalized Bioceramic Grafts For Craniomaxillofacial Bone Regeneration, Ana Beatriz G. De Carvalho, Maedeh Rahimnejad, Rodrigo L. M. S. Oliveira, Prabaha Sikder, Guilherme S. F. A. Saavedra, Et. Al.

Mechanical Engineering Faculty Publications

The reconstruction of craniomaxillofacial bone defects remains clinically challenging. To date, autogenous grafts are considered the gold standard but present critical drawbacks. These shortcomings have driven recent research on craniomaxillofacial bone reconstruction to focus on synthetic grafts with distinct materials and fabrication techniques. Among the various fabrication methods, additive manufacturing (AM) has shown significant clinical potential. AM technologies build three-dimensional (3D) objects with personalized geometry customizable from a computer-aided design. These layer-by-layer 3D biomaterial structures can support bone formation by guiding cell migration/proliferation, osteogenesis, and angiogenesis. Additionally, these structures can be engineered to degrade concomitantly with the new bone tissue …

Shape Memory Alloy Capsule Micropump For Drug Delivery Applications, Youssef Mohamed Kotb

Theses and Dissertations

Implantable drug delivery devices have many benefits over traditional drug administration techniques and have attracted a lot of attention in recent years. By delivering the medication directly to the tissue, they enable the use of larger localized concentrations, enhancing the efficacy of the treatment. Passive-release drug delivery systems, one of the various ways to provide medication, are great inventions. However, they cannot dispense the medication on demand since they are nonprogrammable. Therefore, active actuators are more advantageous in delivery applications. Smart material actuators, however, have greatly increased in popularity for manufacturing wearable and implantable micropumps due to their high energy …

Environment And Response Of 3d-Encapsulated Mesenchymal Stem Cells To Mechanical Loading, Augustus Greenwood

McKelvey School of Engineering Graduate Student Theses & Dissertations

This thesis explores the micromechanical environment induced when cyclically compressing hydrogels via finite element modeling and experimentally on the impact of loading on mesenchymal stem cells (MSCs) when encapsulated withing 3D hydrogel matrices. Degenerative joint diseases, characterized by cartilage degradation, present significant challenges due to cartilage's limited self-repair capacity. Innovative approaches, including stem cell-based therapies and engineered biomaterials, have emerged as promising strategies for cartilage repair and regeneration. This work specifically investigates the calibration of a bioreactor, the uniformity of load response across the hydrogel constructs via finite element modeling (FEM), and the stress response of MSCs subjected to various …

Insights Into The Characterization And Degradation Of Electrospun Polycaprolactone Scaffolds For Tissue Engineering Applications, Caleb B. Wells

Theses and Dissertations

Electrospun polymeric biodegradable scaffolds are essential in tissue engineering, particularly for Engineered Tissue Vascular Grafts (ETVGs), which promise advancements in treating coronary artery disease, peripheral arterial disease, congenital cardiovascular defects, and renal disease. These scaffolds present a solution to issues with autologous graft availability and durability. While large-diameter grafts in low-pressure environments have seen success, small-diameter grafts in high-flow scenarios remain challenging. Understanding polymeric scaffold degradation and behavior during incubation, especially under dynamic mechanical loading, is vital for clinical translation of small-caliber ETVGs.

This research focuses on characterizing the mechanical and microstructural properties of electrospun polycaprolactone (PCL) scaffolds and their …

Borophene And Graphene For Non-Enzymatic Biosensor- Ab-Initio Study, Omar A. Ismail

Theses and Dissertations

Non-enzymatic glucose sensing holds promise to overcome limitations associated with glucose oxidase, such as oxygen dependence and short shelf life. This study explores the potential sensing capabilities of borophene and graphene through direct interaction with various compounds, including β-glucose, uric acid, ascorbic acid, fructose, and acetaminophen. Using Density Functional Theory (DFT), we calculated binding energies and the respective Density of States (DOS) for these adsorbates on both graphene and borophene surfaces. Preliminary results suggest that borophene might exhibit nearly twice the affinity for β-glucose compared to graphene. Moreover, the calculated Density of States reveals distinct distortions in the electronic states …

Air-Jet Bioprinting Of Stem Cell-Encapsulated Alginate Micro-Droplets For Organoid Biomanufacturing, Mirabella B. Stump

Electronic Theses and Dissertations

Biomanufactured 3D-organoids show promise for modeling and treating various conditions, particularly insulin-dependent diabetes mellitus (type-1 diabetes). Pancreatic islet organoids serve as sustainable sources of insulin-producing β-cells, potentially restoring insulin regulation in patients and providing a long-term solution for diabetes. Hydrogel droplet printing is an emerging technique in regenerative medicine due to its advantageous tunability and biocompatibility; however, challenges of consistency, quality control, and scalability persist. To address these issues, we developed a novel air-jetting based droplet bioprinting system for the generation of monodispersed alginate micro-droplets. The objective of this project was to incorporate human induced pluripotent stem cells (hiPSCs) into …

Cellulose Materials For Drug Delivery Applications, Reham Mohamed

Mechanical Engineering Theses

Non-healing wounds are a growing global public health concern due to inadequate or ineffective therapeutic products available. Cellulose-based biopolymers are attractive wound dressing materials due to their biocompatibility, biodegradability, non-toxicity, and cost-effectiveness. This study aims to design and fabricate solid dosage formulations using carboxymethyl cellulose (CMC) and ethyl cellulose (EC) to facilitate multi-stage releases of phenytoin (PHT) and tetracycline hydrochloride (TCH) from plain carriers, fibers/films composites, and layer-by-layer fiber composites. Results from in vitro drug release assays demonstrated a time-dependent release up to 8 hours from PHT-loaded EC fibers, while TCH-loaded CMC films exhibited a rapid release within 5 minutes. …

Fungi In Flux | Designing Regenerative Materials And Products With Mycelium, Arvind Bhallamudi

Masters Theses

As the world grapples with the escalating crisis of climate threats and environmental degradation, this research delves into the synergistic potential of design and biology, developing safe and sustainable materials for applications in prototyping, furniture and interior design. Harnessing the power of a unique organism - fungi, the study proposes an accessible, efficient, and resilient material resource system. It utilizes local waste streams and mycelium (the vegetative part of fungi) to grow functional structures. An experimental and small-scale protocol is modeled by testing bio-fabrication and bio-printing methods. The composites' performance qualities and characteristics are evaluated through mechanical testing and a …

Effect Of Blank Moisture Content On Forming Behaviour And Mechanical Properties Of Paperboard Tray Packages, Arvo Niini, Lena Berthold, Tobias Müller, Panu Tanninen, Jens-Peter Majschak, Juha Varis, Ville Leminen

Journal of Applied Packaging Research

Tray blanks were moisturised to study the effect of different blank moisture content levels on forming behaviour and mechanical properties of paperboard tray packages. The blank moisturisation was done by spraying water to the blanks before their three-dimensional (3D) forming. The trays were 3D formed by press forming or deep drawing. Visual quality and punch force values were used as indicators to evaluate the forming behaviour of the trays. The mechanical properties of the trays were investigated with compression, torsion, and storing tests. A high blank moisture content reduced the punch force, and the elevated blank moisture was connected to …

Advanced Microstructural Characterization Of Functionally Graded Dental Ceramic Material For Materials-Informed Finishing, Angani Vigneswaran

Theses and Dissertations--Manufacturing Systems Engineering

Yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) has gained popularity as the choice of material for dental prosthetics. Ivoclar Vivadent’s IPS e.max ZirCAD Prime dental ceramic incorporates a unique gradient technology that varies the yttria content over the thickness of the material. The top layer is composed of 5Y-TZP which is desired for its optical properties while the bottom layer is composed of a much stronger 3Y-TZP. In between the two layers, 5Y-TZP and 3Y-TZP are mixed to form a transition layer. Varying the amount of yttria allows for more esthetically pleasing translucency in the visible areas of the restoration without compromising …

An Experimental Study On The Mechanical Properties And Chemical Composition Of Lcd 3d Printed Specimens, Sebastian Gomez

College of Graduate Studies: Theses & Dissertations

Additive manufacturing technologies have been enhanced throughout the years yet have surprised the manufacturing industry due to their high-end surface finish and dimensional accuracy. Different experiments have been done to identify a specific phenomenon known in the vat-polymerization field. Distortion and dimensional inaccuracy tend to affect the overall properties of the process, either physical or chemical. This approach allows the understanding of how the physical properties have been affected and how to study the chemical properties to avoid this type of phenomenon. The chemical reaction between polymer and UV light has been studied and experimented with to the point that …

An Experimentally Validated Computational Model For The Degradation And Fracture Of Magnesium-Based Implants In A Chemically Corrosive Environment, Mark M. Ousdigian

Dissertations, Master's Theses and Master's Reports

In the orthopedic and cardiovascular fields there is a growing interest for biodegradable implants, which can be naturally degraded in the body environment over time so that no extraction surgery is required. These implants must be designed to maintain their strength until the fracture has healed in the body, which could be influenced by many factors such as -the patient’s age, activities, body weight, pre-existing conditions etc. Hence, an ideal implant design should be done on a patient-by-patient basis. In the present work, a computational model is developed to predict the degradation and fracture of magnesium-based implants in a stress-coupled …

Nanomaterials For Cardiovascular Engineering, Roya Bagheri

Dissertations, Master's Theses and Master's Reports

Cardiovascular diseases and disorders (i.e., those related to heart and blood vessels) are the main reasons for mortality worldwide. Nanomaterials, with their unique morphologies and properties, have a great potential for advancing cardiovascular engineering to treat diseases and disorders. In this dissertation, several cardiovascular applications of conductive nanomaterials were investigated. First, a conductive nanomaterial was explored to fabricate biohybrid nanomaterial-cardiomyocyte (CM – heart muscle cell) systems. Using Carbon Nanotube (CNT) forest as a 3D porous and conductive scaffold was investigated. The influence of the CNT forest on the viability, attachment, and spreading of CMs and their genetic information was …

Finite Element Analysis Of 3d-Printed Pcl Scaffolds, Ireolu K. Orenuga, Joao Soares, Phillip D. Glass, Daeha Joung Ph.D.

Undergraduate Research Posters

Finite Element Analysis of 3D-printed PCL Scaffolds for Synergizing Cellular Micro-Environment and Mechanical Stimuli to Enhance Engineered Tissue Growth in Vitro

Ireolu Orenuga,1 Phillip Glass,2 Daeha Joung,2 Joao S. Soares1

1. Department of Mechanical and Nuclear Engineering, College of Engineering, Virginia Commonwealth University
2. Department of Physics, College of Humanities & Sciences, Virginia Commonwealth University

Introduction: Tissue engineering aims to create viable and functional engineered tissues via biodegradable scaffolds and autologous cells. Scaffolds play an essential part in organizing the architecture of developing tissues and aid in the proper function of implants acutely by serving as mechanical support and long-term by …

Material Characterization And Comparison Of Sol-Gel Deposited And Rf Magnetron Deposited Lead Zirconate Titanate Thin Films, Katherine Lynne Miles

Mechanical Engineering ETDs

Lead zirconate titanate (PZT) has been a material of interest for sensor, actuator, and transducer applications in microelectromechanical systems (MEMS). This is due to their favorable piezoelectric, pyroelectric and ferroelectric properties. While various methods are available to deposit PZT thin films, radio frequency (RF) magnetron sputtering was selected to provide high quality PZT films with the added capability of batch processing. These sputter deposited PZT films were characterized to determine their internal film stress, Young’s modulus, composition, and structure. After characterization, the sputtered PZT samples were poled using corona poling and direct poling methods. As a means of comparison, commercially …

Eagle Medical Tray Denesting & Debris Removal Process, Nicholas Allen Ungefug, Noah Chavez, Susana Shu-Lin Okhuysen, Michael Augustine Pennington

Industrial and Manufacturing Engineering

Eagle Medical Incorporated is a contract medical device packaging and sterilization company. The company purchases thermoformed medical packaging trays, which maintain the sterility of medical devices, from various manufacturers. To ensure packaging quality and to prevent cleanroom contamination, Eagle Medical inspects and sterilizes each blister tray that they order. This process is an essential non-value-added activity that creates a bottleneck. Cleanroom employees must stop packaging medical devices and attend to the processing of blister trays and packaging solutions. The blister trays arrive at Eagle’s facility in nested stacks. Vibration and movement during shipping further compresses the stacks, which makes separation …

Developing New Crutch Tip Design For Overall Increased Stability And Improved Movement On Different Terrains, Lauren Skinner

Honors Theses

Crutches are a mobility assistive device that are often used in various situations, such as post- surgical rehabilitation and recovery after injury. The current crutch tip design that is used on today’s crutches are often unstable and do not provide quality movement on different terrains, such as snow, ice, mud, and wet surfaces. These problems would be solved with a new tip design that could be attached to existing crutches or manufactured with the crutch itself. The team’s solution to this problem is a crutch tip with modular parts. The tip would attach to the shaft of the crutch like …

Surface Laser Texturing Of Cocrmo Alloys, Gabriel Dharwadker

Biomedical Engineering Undergraduate Honors Theses

Artificial orthopedic implants such as hip joints suffer from excessive wear due to excess friction between the polyethylene and cobalt-chromium-molybdenum surfaces of the device. This increase in friction causes a fraction of them to give out within ten years. Therefore, to minimize the probability of this happening, recent research has been conducted regarding laser surface texturing of the cobalt-chromium-molybdenum alloy components of artificial joints. These surface textures serve to mimic the native lubrication mechanisms of cartilage in natural joints, which, in a natural joint, lowers the friction. However, the production of these laser surface textures is still a field of …

Rheological Behavior Of Dspc-, Dbpc-, And Dppc-Oxygen Microbubbles And Their Effectiveness In Improving Survival In A Rat Model Of Lipopolysaccharide-Induced Acute Respiratory Distress Syndrome, Riaz Ur Rehman Mohammed

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Acute respiratory distress syndrome (ARDS) causes 75,000 deaths in the U.S., annually. It is characterized by hypoxemia and damage to the lung alveoli. ARDS Management strategies involve extracorporeal membrane oxygenation (ECMO) and mechanical ventilation, but none of these methods improve the mortality rates. Oxygen microbubbles (OMBs) consist of a lipid shell with an oxygen core and have potential to augment oxygenation to manage ARDS. Previous studies demonstrated significant improvements in systemic oxygenation and mortality upon administering OMBs.

We replicated an ARDS rat model by intratracheal administration of lipopolysaccharide at a 24 mg/kg dose. After inducing the disease in rats, the …

A Survey Of Stainless Steel In Medical And Surgical Application, Noah Slack, Clint Balch

ME 4133/6133 Mechanical Metallurgy

Stainless steels can be separated into four families based on the microstructure of the material: Austenitic, Ferritic, Martensitic, and Duplex. Each family provides a specific set of advantages and disadvantages, and material selection should be based on the specific application the material will be used for. For this study, the processing, microstructure, and performance of the four families of stainless steels will be compared in the context of medical device applications. The most important factors in medical device materials are biocompatibility, surface properties, mechanical properties and life span/corrosion resistance. This study will focus on medical devices that will be permanently …

Poly(2-Hydroxyethyl Methacrylate) Hydrogels For Contact Lens Applications–A Review, Kushendarsyah Saptaji, Nurlaely Rohmatul Iza, Sinta Widianingrum, Vania Katherine Mulia, Iwan Setiawan

Makara Journal of Science

The emerging technology in biomedical engineering requires biocompatible materials, which are also referred to as biomaterials. For a material to be considered biocompatible, it should not interact with human tissues in a harmful way, and vice versa. Various properties of biocompatible materials, such as mechanical and optical properties, have to be considered for different biomedical applications. One of the most popular applications of biomaterials is for contact lenses. Hydrogels, specifically poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogels, are among the most popular ones in ophthalmologic applications, especially in soft contact lenses. This paper reviews the use of PHEMA hydrogels as one of the …

Layered Double Hydroxide-Based Nanocomposite Scaffolds In Tissue Engineering Applications, Burcin Izbudak, Berivan Cecen, Ingrid Anaya, Amir K. Miri, Ayca Bal-Ozturk, Erdal Karaoz

Henry M. Rowan College of Engineering Departmental Research

Layered double hydroxides (LDHs), when incorporated into biomaterials, provide a tunable composition, controllable particle size, anion exchange capacity, pH-sensitive solubility, high-drug loading efficiency, efficient gene and drug delivery, controlled release and effective intracellular uptake, natural biodegradability in an acidic medium, and negligible toxicity. In this review, we study potential applications of LDH-based nanocomposite scaffolds for tissue engineering. We address how LDHs provide new solutions for nanostructure stability and enhance in vivo studies' success.

A Single Cell Pair Mechanical Interrogation Platform To Study Cell–Cell Adhesion Mechanics, Amir Monemianesfahani

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Cell-cell adhesion complexes are macromolecular adhesive organelles that integrate cells into tissues. Perturbations of the cell-cell adhesion structure or relatedmechanotransduction pathways lead to pathological conditions such as skin and heart diseases, arthritis, and cancer. Mechanical stretching has been used to stimulate the mechanotransduction process originating from the cell-cell adhesion and cell-extracellular matrix (ECM) complexes. The current techniques, however, have limitations on their ability to measure the cell-cell adhesion force directly and quantitatively. These methods use a monolayer of cells, which makes it impossible to quantify the forces within a single cell-cell adhesion complex. Other methods using single cells or cell …

Survival And Proliferation Under Severely Hypoxic Microenvironments Using Cell-Laden Oxygenating Hydrogels, Shabir Hassan, Berivan Cecen, Ramon Peña-Garcia, Fernanda R. Marciano, Amir K. Miri, Ali Fattahi, Christina Karavasili, Shikha Sebastian, Hamza Zaidi, Anderson O. Lobo

Henry M. Rowan College of Engineering Departmental Research

Different strategies have been employed to provide adequate nutrients for engineered living tissues. These have mainly revolved around providing oxygen to alleviate the effects of chronic hypoxia or anoxia that result in necrosis or weak neovascularization, leading to failure of artificial tissue implants and hence poor clinical outcome. While different biomaterials have been used as oxygen generators for in vitro as well as in vivo applications, certain problems have hampered their wide application. Among these are the generation and the rate at which oxygen is produced together with the production of the reaction intermediates in the form of reactive oxygen …

Design And Control Of A Peristaltic Pump To Simulate Left Atrial Pressure In A Conductive Silicone Model, Jeremy Collins

Mechanical Engineering Undergraduate Honors Theses

According to the CDC, atrial fibrillation is responsible for more than 454,000 hospitalizations and approximately 158,000 deaths per year. A common treatment for atrial fibrillation is catheter ablation, a process in which a long flexible tube is guided through the femoral artery and to the source of arrhythmia in the heart, where it measures the electrical potential at various locations and converts problematic heart tissue to scar tissue via ablation. This paper details the design and control of a low-cost ($400) peristaltic pump system using repetitive control to replicate blood pressure in the left atrium in a conductive silicone model …

Biomechanical Investigation Of Plant Vascular Tissue For Bio-Inspired Design And Flexible Composites, Mukesh Roy

Electronic Theses and Dissertations

Since the inception of evolution, nature has continuously optimized all the natural materials. These optimizations are so efficient that scientists and engineers have started taking inspiration from nature. Such inspiration-based solutions provide sustainable development of new materials with enhanced structural properties and functionalities (such as stiffness, stability, toughness, self-healing etc.). This variety of properties and functionalities is mainly due to the hierarchical organization of such components. Abstraction of the hidden cues of the hierarchical organization, principles and underlying structure-function relations are some of the critical approaches of bioinspired materials design. Inspiration from animals and plants has helped develop the design …

Tailoring Texture, Microstructure, And Shape Memory Behavior Of Niti Alloys Fabricated By L-Pbf-Am, Sayed Ehsan Saghaian N.E.

Theses and Dissertations--Mechanical and Aerospace Engineering

Laser Powder Bed Fusion (L-PBF) is one of the most promising Additive Manufacturing (AM) methods to fabricate near net-shape metallic materials for a wide range of applications such as patient-specific medical devices, functionally graded materials, and complex structures. NiTi shape memory alloys (SMAs) are of great interest due to a combination of unique features, such as superelasticity, shape memory effect, high ductility, work output, corrosion resistance, and biocompatibility that could be employed in many applications in automotive, aerospace, and biomedical industries. Due to the difficulties with traditional machining and forming of NiTi components, the ability to fabricate complex parts, tailor …

Additive Manufacturing In Personalized Medicine: Patient-Customized Solid Dose Medicines, And Patient-Customized Wound Care Device, Amir Najarzadeh

Theses and Dissertations--Mechanical and Aerospace Engineering

Personalized Medicine - from a one-size fits all to a tailored approach is the future in pharmaceutical therapeutics and medical applications. The aim of this study is demonstrate additive manufacturing in two personalized medicine applications: 1. Patient- customized solid dose medicines, and 2. Patient-customized wound care device. The aim of the first application is to develop an inexpensive and accurate method to design and fabricate patient-customized tablets. Particularly this paper focuses on fabricating and dose controlling of patient-customized extended release prednisolone-poly(vinyle alcohole) PVA. Dry-Blending, Wet Granulation, Extrusion, Spherionization, Hot melt extrusion (HME) was adopted to produce drug loaded prednisolone-PVA filaments …