Biomedical Engineering and Bioengineering Commons^™

Nasogastric Tube Insertion Aid, Lauren S. Ark, Angela D. Biezins, Zachary B. Crum, Claire E. Nodine, Morgan N. Pope, Natsumi L. Shudo

Biomedical Engineering

The Nasogastric Tube Insertion Aid project, developed under the sponsorship of the BiCEP Program at California Polytechnic State University, aims to enhance the accuracy and efficiency of nasogastric (NG) tube placement. This initiative was inspired by challenges observed during the BiCEP summer program, where difficulties in NG tube insertions led to multiple attempts, increased patient discomfort, and serious medical risks, including lung punctures and brain trauma. The project's goal was to design an insertion aid that improves placement accuracy while being cost-effective and user-friendly for medical professionals. The device features an external tensioning mechanism that allows controlled deflection of the …

Balance Assessment Using A Handheld Smartphone With Principal Component Analysis For Anatomical Calibration, Evan C. Anthony, Olivia K. Kam, Stephen M. Klisch, Scott Hazelwood, Britta Berg-Johansen

Biomedical Engineering

Most balance assessment studies using inertial measurement units (IMUs) in smartphones use a body strap and assume the alignment of the smartphone with the anatomical axes. To replace the need for a body strap, we have used an anatomical alignment method that employs a calibration maneuver and Principal Component Analysis (PCA) so that the smartphone can be held by the user in a comfortable position. The objectives of this study were to determine if correlations existed between angular velocity scores derived from a handheld smartphone with PCA functional alignment vs. a smartphone placed in a strap with assumed alignment, and …

A Study On The Effects Of Cementless Total Knee Arthroplasty Implants’ Surface Morphology Via Finite Element Analysis, Scott Hazelwood, Peter J. Hunt, Mohammad Noori, Naudereh B. Noori, Wael A. Altabey

Biomedical Engineering

Total knee arthroplasty (TKA) is one of the most commonly performed orthopedic surgeries, with nearly one million performed in 2020 in the United States alone. Changing patient demographics, predominately indicated by increases in younger, more active, and more obese patients undergoing TKA, poses a challenge to orthopedic surgeons as these factors present a greater risk of long-term complications. Historically, cemented TKA has been the gold standard for fixation, but long-term aseptic loosening continues to be a risk for cemented implants. Cementless TKA, which relies on the surface morphology of a porous coating for biologic fixation of implant to bone, may …

Smart Cushion Device For Elderly Aging In Place, Anna Dion, Nate Colley, Leonardo Bravo

Biomedical Engineering

Our task at hand is to develop a consumer-focused solution for improving elder care to provide additional peace of mind for seniors and caregivers using technology to extend independent living. We intend to create a device that will improve the quality of life of elderly individuals living alone by encouraging periodical movement throughout the day, along with monitoring pressure distribution and alerting when pressure concentration is potentially harmful. It will also alert users to the presence of moisture which can arise from spills or incontinence. The key stakeholders of this project include elderly adults over the age of 65 who …

Bolin Symes Prosthetic, Samuel C. Collins, Rowan Sun, Jake Hacker

Biomedical Engineering

This project’s purpose is to design a comfortable prosthetic for an individual with a Syme’s amputation, which is a below-knee amputation that removes the foot from the leg at the ankle joint. The goal is to minimize the discomfort that is associated with the current prosthetic leg options for the client, Mr. Bolin, who has the Syme’s amputation. This project also seeks to improve mobility, quality of life, and activity levels of the client. The stakeholder for this project is Mr. Bolin. The final prototype performed successfully when worn by the client and passed comfort testing. Furthermore, COMSOL modeling of …

Foot And Ankle Exoskeleton, Janet M. Velasquez Cabral, Kathryn C. Hamilton, Grant R. Lautze

Biomedical Engineering

This paper presents a non-motorized foot and ankle exoskeleton to assist persons who have no lower limb or abdominal function. Exoskeletons are defined as “an artificial external supporting structure” [1], they are wearable devices that can be used to assist the capabilities of the human body. Although the exoskeleton must be used with crutches, plantarflexion and dorsiflexion will be implemented within the ankle joint to alleviate strain on the foot and ankle, strategically designed in a way that supports the user so their walking performance is as ideal as possible. Additionally, safety straps will be integrated into the foot portion …

Prosthetic Aid For Lifting (Pal), Emma Caringella, Cameron Yartz, Dawn Veditz

Biomedical Engineering

Approximately 1.7 million people in the United States use a limb prosthetic [1]. For these individuals, their prosthetic often enables them to engage in their choice of physical activities. Many prosthetic companies design prosthetic limbs for use in specific athletic activities such as weightlifting. These devices are not designed for everyday wear or a large variety of tasks but enable the person to interact with free weights and workout machines. According to an email conversation between the team and Bob Radocy, Founder of Therapeutic Recreational Services (TRS Inc.) and upper limb amputee, while he could not reveal how many people …

Deep Vein Thrombosis Diagnostic Device, Alisha Mitha, Karina Martel, Ayla Silbahar

Biomedical Engineering

Deep Vein Thrombosis is one of the leading causes of death in hospitals worldwide due its ability to form in patients who are sedentary after receiving care. There is a need for a DVT diagnostic device that can be worn constantly in order to alert medical professionals if a thrombosis is forming, which is the basis of this senior project. The current solutions are time consuming, and look for thrombi after they have fully formed. The goal of this senior project is to design and construct a device to constantly monitor in-hospital patients for early stage DVT and alert hospital …

The Wildland Firefighter Respiratory Protection Device, Oliver Pilon, Xaviera Pons, Calder Wood, Tommy Ozawa, Jack Adema, Payton Mayer

Biomedical Engineering

This paper presents the development of First Respire and their design of a powered air-purifying respirator (PAPR) specifically curated for wildland firefighter while simultaneously addressing the critical absence of respiratory protection for wildland firefighters operating in the challenging wildland-urban interface (WUI) environments. Current respiratory protection options, such as bandanas and N95 masks, fall short in providing adequate defense against toxic particulate matter and gases, exposing firefighters to increased risks of health complications, including cancers and respiratory diseases. Through collaborative efforts of the Wildfire Conservancy, the WUI Fire Institute at Cal Poly, and CAL FIRE, First Respire aims to create a …

Kinomatic Hip Arthroplasty Pelvic Tilt, Emily Wolfert, Teddy Alberton, Sydney Dresser

Biomedical Engineering

Kinomatic is a startup company that provides custom preoperative surgical plans for orthopedic surgeons. The surgical plans are intended for total hip and knee arthroplasty to provide patient-specific measurements and implant sizing. Surgeons can view the surgical plans as 3D models in virtual reality with an Oculus Quest 2 headset or as a PDF summary. Most patients receive a diagnostic anterior-posterior (AP) x-ray that allows their surgeon to determine if they are eligible for a total hip or knee replacement. After diagnosis, the patient can also choose a Kinomatic surgical plan to provide their surgeon with additional data points before …

Coolsplint: Inflammation Reduction Accessory, Laura C. Denney, Winston H. Giang, Aanchal Singh

Biomedical Engineering

This document outlines a project sponsored by Elizabeth Mentel and Michael Clausson that addresses the shortcomings in current splinting options, particularly for wrist fractures in elderly patients. Stakeholders include clinicians, patients, and emergency medical technicians. Multiple improvements can be made to current splinting options to help alleviate inflammation along with splint versatility, affordability, accessibility, and ease of use. After determining the critical customer requirements, the primary objective of this project was to find a way to manage inflammation. The project explores existing splinting solutions and proposes a new design that utilizes cooling rods to reduce inflammation. The document reviews various …

Biobesoothe, Noah M. Taylor, Jillian Trilevsky, Sam Rosenkranz

Biomedical Engineering

This document details the background, design process, and functional prototype for the BioBesoothe senior project. The project aimed to address difficulties with self-regulation in children with autism. It focused on encouraging even, slow breathing to activate the parasympathetic nervous system, which in turn lowers heart rate, blood pressure, and stress levels. The project was guided by research into ways to achieve an appropriate breathing rate. In addition to functionality, emphasis was placed on engagement, ergonomics, and affordability. It was highly important for this product to be engaging to hold the interest of its patients and allow for extended periods of …

Tourniquet Pressure Gradient Measurement Apparatus, Luis Enrique Perez, Elsa Elizabeth Bates

Biomedical Engineering

The goal of this project was to design a device that would measure pressure gradient data across the width of an elastic and inelastic tourniquet cuff using a human limb model. The main customer requirements that were focused on were to accurately measure the pressure from a tourniquet, keep the cost down, and be easy to use. The targeted design specifications were to read pressure values ranging from 0-400 mmHg, keep the test length under 5 minutes, and to keep the cost of materials under $400. The design of the device ended up consisting of 5 IV pouches that were …

Auto Adjustable Flow Regulator, Ethan Hemmerlin, Jack Dooley

Biomedical Engineering

The Auto-Adjustable Oxygen Flowmeter device is to be used in conjunction with an oxygen source or reservoir, as well as a low-flow nasal cannula apparatus. The device is applicable for patients requiring an oxygen flow rate of 0-6 L/min. Further, the device works to maintain a healthy blood-oxygen concentration of 90-94% for typical patients, as well as an 88-92% range for COPD patients who are chronic CO2 retainers. A reflective pulse oximeter will record the SpO2 concentration of the patient. The outputted SpO2 concentration will be transmitted to an internal processing PCB from which it will interact with the oxygen …

Assisted Delivery Device, Rachel Rowe, Madeliene Mumford, Jenna Eissmann, Brittany Trinh

Biomedical Engineering

Current devices used to assist in complicated births present serious risks to both the mother and the fetus, which has caused a decline in the use of these devices over the last decade. This senior project team has proposed an alternative device that interfaces with the infant’s shoulders that would decrease these risks and contribute to the decrease of unnecessary c-sections due to device inadequacy. This Statement of Work includes research on the downfalls of current devices, existing patents, customer requirements, engineering specifications, and a design plan through December of this year. The next phase of this project will include …

Neonatal Respiratory Therapy Interface, Kennedy Austin, Evan Manley, Parker Murray, Harrison Oen

Biomedical Engineering

This Final Report reviews and outlines the scope, objectives, and deliverables for the BCPAP Interface Redesign project, aimed at enhancing the functionality, usability, and patient experience of the existing BCPAP interface. It also includes detailed testing results and manufacturing plans for the device prototype. The current system has challenges in universal usability, time constraints, and patient comfort, which this project intends to address effectively. The goal of this project is to reevaluate and redesign the interface of the bubble continuous positive air pressure (BCPAP) machine’s attachment site with the infant. Due to the millions of premature neonates and thousands of …

Balance Assessment Using A Smartwatch Inertial Measurement Unit With Principal Component Analysis For Anatomical Calibration, Benjamin M. Presley, Jeffrey C. Sklar, Scott J. Hazelwood, Britta Berg-Johansen, Stephen M. Klisch

Biomedical Engineering

Balance assessment, or posturography, tracks and prevents health complications for a variety of groups with balance impairment, including the elderly population and patients with traumatic brain injury. Wearables can revolutionize state-of-the-art posturography methods, which have recently shifted focus to clinical validation of strictly positioned inertial measurement units (IMUs) as replacements for force-plate systems. Yet, modern anatomical calibration (i.e., sensor-to-segment alignment) methods have not been utilized in inertial-based posturography studies. Functional calibration methods can replace the need for strict placement of inertial measurement units, which may be tedious or confusing for certain users. In this study, balance-related metrics from a smartwatch …

The Influence Of Myoblast Implantation On Arteriogenesis In Mice With Diet-Induced Obesity, Rayana Gutierrez

Biomedical Engineering

Peripheral arterial occlusive disease (PAOD) is characterized by atherosclerosis, which is the buildup of plaque, consisting largely of cholesterol, in the arterial walls. This plaque accumulation eventually blocks blood flow to the limbs, causing symptoms such as intermittent claudication and tissue death in cases of critical limb ischemia. The body compensates for the reduced perfusion by enlarging pre-existing bypass arteries, known as collaterals, in a process called arteriogenesis. However, in many cases, collateral networks constructed through arteriogenesis fail to enlarge sufficiently or function effectively in patients. Therefore, the development of a therapeutic intervention specifically targeting this process would offer a …

Hypoxic Incubator Control System, Marina Zellers, Jennifer Rojas, Derek Tran

Biomedical Engineering

This paper describes the functionality of the current Hypoxic Incubator, a project started by BMED graduate students Simone Helfrich and Makenzie Jones, with the objective being to redesign the device to address potential areas of improvement. The hypoxic incubator has been designed to allow for the control of the O₂, CO₂, and N₂ levels such that researchers can grow and study cell culture in hypoxic conditions; however, its efficacy and efficiency are limited by the fact that it often overshoots the desired setpoints for O₂ and CO₂ in addition to being difficult to …

Postpartum Hemorrhage Detection Device, Kaitlyn Bailey, Adrian Diaz, Alcides Caballero

Biomedical Engineering

During a cesarean section, blood loss greater than 1000 mL is classified as a hemorrhage. Quantified blood loss methods are used to detect hemorrhage, however existing methods are inaccurate and time consuming. Our proposed device is inserted vaginally during a cesarean section to collect and quantify blood lost via the cervix during and after the procedure. The device also applies light suction to the uterus, which can aid in uterus collapse and decrease the risk of postpartum hemorrhage.

Biomaterials Redesign Of Microvascular Anastomotic Coupler, Nick Glatter, Sophie Jackson, Samuel Leingang

Biomedical Engineering

The key factors in the redesign of this part include the use of biomaterials, the redesign of the part geometry to include these biomaterials, and the proposition of production scale manufacturing methods suitable for these redesigns. The choice of biodegradable material was guided by previous literature, during which we found the PLGA polymer used in similar predicate devices with a biodegradability timeline similar to our goals. The model of coupler serving as the inspiration for the redesign utilizes two very strong but bioinert materials, polyethylene, and stainless steel. These high strength materials can withstand much greater forces than the biodegradable …

Gait Analysis Device For Elderly Fall Prediction, Ryan Hahn, Claudia Miller, Evan Yakligian

Biomedical Engineering

This document serves to outline the design process and final design for our project to address elderly independent living in collaboration with Apple. Included in this document is necessary academic literature of current fall risk assessments and descriptions of the current market of wearable gait analysis devices. Based on this research and data, we then outline a plan for design, manufacturing, prototyping, and testing a device to fulfill the original prompt given by our sponsors: create a device that will increase the ability of an aging loved one to live at home safely. This device is a wearable that collects …

Analytical Methods For Determining Connectivity Leakage In Collaboration With Meissner Filtration Products, Ennis Cuhadaroglu, Finn Mccarthy, Alvin Ng

Biomedical Engineering

The scope of our project involved choosing existing testing procedures and determining a viable sample size to determine an accurate leakage rate of single-use system connections (SUS). Another goal was to assess the effects of gamma irradiation on the material integrity of the hose barb to tubing connections.

Our key customer requirements included: being able to determine an overall leakage rate and making a repeatable testing process. The importance of these requirements was determined through our house of quality and Pugh charts. To achieve the requirements, we tested the leakage in low-pressure and high-pressure scenarios with a large enough sample …

Functionality Of The Gracilis Collateral Is Impaired Following Arteriogenesis And Cell Transplantation, Ada A. Tadeo

Biomedical Engineering

Peripheral Arterial Disease involves narrowed arteries, reducing blood flow to limbs. Increasing blood flow to those extremities is possible by redirecting the blood to flow through natural bypasses (i.e. collateral arteries), which can enlarge via arteriogenesis to maintain blood supply once the prominent arteries have become occluded. This study aims to investigate how arteriogenesis affects collateral function, if myoblast transplantation can stimulate collateral growth, and how that in turn may affect collateral function. Femoral artery ligation was performed to mimic the blockage that occurs in patients with ischemic diseases on lean mice and mice with diet induced obesity (DIO). A …

Self-Balancing Bicycle Device, Charles Cole, Raffy Lorenzo, Neil Boyal

Biomedical Engineering

The sponsor, Justin Shaw, is currently developing a bicycle for an athlete who has lost movement in their legs. This athlete can no longer experience the unmatched feeling of naturally banking a bicycle at corners. The Self-Balancing Bike Device Team will create a device that can self-balance an electric recumbent bicycle at low speeds while being almost undetectable while turning. This document will outline the team’s background research into self-balancing vehicles, define the needs that must be solved, and delineate a schedule for future milestones.

Rod Bend Approximator For Minimally Invasive Spinal Surgery, Amanda Hansell, Anise Ghandchi, Shervin Moghimi

Biomedical Engineering

This Final Report will go over the project deliverables and future steps in the making of a rod bending approximator tool by the Cal Poly Senior Design team for the client SeaSpine. The latest designs and research done regarding minimally invasive surgery (MIS) is covered including the impediments with the current methods. SeaSpine presented the need to our team for an approximating tool within the MIS procedure. Our team began project planning through task generation and schedule development. Once the product definition was fully understood, competition was evaluated and engineering specifications were created for the project. A conceptual design was …

Wire Cutting Saw For Spinal Fusion Surgery, Connor Kilzer Kilzer, Kayla Hong, Kyle Himmelein

Biomedical Engineering

The purpose of this project was to design and prototype a spinal facetectomy tool which will minimize the risk of spinal nerve damage and standardize this procedure for all surgeons. This Final Report for Alphatec describes the scope of the project, the process to get to the final prototype of the device, along with a project timeline for the team. A background of current devices and their issues is included to illustrate the need for a new spinal facetectomy device. Within the scope of the project includes a list of customer requirements for the device and the process of translating …

Impact Of Sex On Proliferation And Maturation Of Primary Isolated Myoblasts, Elsa M. Bean

Biomedical Engineering

Peripheral arterial occlusive disease (PAOD) is caused by the buildup of atherosclerotic plaque causing restriction in blood flow in tissue, known as ischemia. It affects 8 million people in the United States and can hinder daily life through the onset of symptoms such as intermittent claudication and in extreme cases ulcers and gangrene. Surgical revascularization is not accessible to certain patient populations, such those of advanced age, highlighting a need for alternative therapies. For example, naturally occurring bypass arteries, called collateral blood vessels, can remodel and enlarge to bypass the occlusion. This process, known as arteriogenesis, has been studied as …

Insole Fall Prevention Device, Nick M. Hughes, Andrew M. Slaboda

Biomedical Engineering

Falls among the aging population occur every single day, with 1 in every 5 resulting in some injury and 300,000 hospitalized every year with a hip fracture [1]. The most popular and effective way to mitigate these falls is through physical therapist intervention. However, with the increased popularity in telerehab, many patients at risk for falls cannot accurately convey their gait tendencies to their physical therapists from the comfort of their home or while not in direct contact with the PT. A device like an insole, implanted with force sensors, which measures different parts of a patient’s foot, could convey …

Baseball Pitching Arm Three-Dimensional Inertial Parameter Calculations From Body Composition Imaging And A Novel Overweight Measure For Youth Pitching Arm Kinetics, Dalton J. Jennings, Scott K. Reaves, Jeffrey Sklar, Colin Brown, John Mcphee, Scott Hazelwood, Stephen M. Klisch

Biomedical Engineering

Many baseball pitching studies have used inverse dynamics to assess throwing arm kinetics as high and repetitive kinetics are thought to be linked to pitching injuries. However, prior studies have not used participant-specific body segment inertial parameters (BSIPs), which are thought to improve analysis of high-acceleration motions and overweight participants. This study's objectives were to (1) calculate participant-specific BSIPs using dual energy X-ray absorptiometry (DXA) measures, (2) compare inverse dynamic calculations of kinetics determined by DXA-calculated BSIPs (full DXA-driven inverse dynamics) against kinetics using the standard inverse dynamics approach with scaled BSIPs (scaled inverse dynamics), and (3) examine associations between …