Biomedical Engineering and Bioengineering Commons^™

Isolating Human Monocytes And Characterizing Human Macrophage Polarization Through Flow Cytometry And Morphological Analysis, Arthur Peter Klujian

Biomedical Engineering

Peripheral Artery Occlusive Disease (PAOD) is a cardiovascular disease that affects more than 200 million people. It is characterized by atherosclerosis, a biologic process where peripheral arteries are restricted due to a buildup in cholesterol and fats. This eventually leads to ischemia, developing complications such as chronic inflammation and possible limb amputation. The current standard of care for patients includes surgical revascularization and exercise therapy. These treatment strategies have had limited success with alleviating symptoms and restoring perfusion, however, many patients still experience ischemia and do not fully restore blood flow. Further exploration in pursuit of treating these shortcomings led …

Pet Mobility Project, John Shelby, Lily-Rose Jolie Bacon, Andrea Yasmine Reyes

Biomedical Engineering

The Pet Mobility Project, sponsored by Terri Smith and Jasper Jackson, is an initiative aimed at providing a custom mobility aid to a pet in the San Luis Obispo community. Amber Rappozo’s young German Shepherd, LeDoux, was selected as the project’s recipient. LeDoux suffers from hindleg weakness and, as a result, has limited mobility. This document provides a comprehensive overview of the Pet Mobility Project, detailing the motivation, background, and design approach behind the development of a LeDoux’s custom mobility aid.

Cardiac Twitch Force Measurement System, Tara Hoffman, Sebastian Carrascal Gómez, Julian Macdonald

Biomedical Engineering

The goal of this project is to develop a low-cost and accurate force measurement system and method of measurement to be used in the testing of grown cardiac tissue samples. The primary stakeholder in this project is Dr. Luke Perreault, a biomedical engineering professor at California Polytechnic State University San Luis Obispo who is studying grown cardiac tissue rings, and any of his student lab personnel. Other stakeholders include other researchers in the tissue engineering field who require a similar form of testing to the methods developed in this project.

This document will introduce the identified problem and background as …

Restoreband: An Electromyography Band For Tracking Forearm Muscle Action And Activation In Post-Stroke Adults, Mairin T. Mullen, Melody Nwagwu, Kosuke Nishimura, Benjamin Miramon

Biomedical Engineering

This study involves the design of a non-invasive surface electromyography (EMG) band to estimate hand posture for individuals recovering from stroke and other neuromuscular disorders. The device is meant to measure forearm muscle activation to provide objective recovery data that can supplement traditional rehabilitation. Current EMG systems are often expensive, cumbersome, and difficult to use. The goal of this study is to develop an affordable, accurate, and easy to use solution that improves access to EMG motor monitoring.

The key stakeholders include stroke survivors, clinicians, and the project sponsor, Dr. Espinoza-Wade. This report includes project introduction, background, objectives, and project …

The Effects Of Adipose Tissue Trauma On Vascular Function After Collateral Arteriogenesis, Nathan Tran

Biomedical Engineering

Peripheral artery disease (PAD) affects an estimated 200 million people worldwide and is characterized by arterial narrowing that reduces perfusion to the limbs. Collateral arterioles can naturally restore blood flow through a remodeling process called arteriogenesis, making it a promising therapeutic target. However, the femoral artery ligation (FAL) model used to study arteriogenesis requires surgical access deep to the inguinal fat pad, and approaches for handling the fat pad vary widely across surgeons and protocols. Since adipose tissue harbors a large population of macrophages, the immune cells that govern arteriogenesis, fat pad manipulation may introduce confounding inflammatory stimuli that disrupt …

The Impact Of Human Myoblasts On Macrophage Polarization In A Coculture Model, Elisabeth Ann Stodola

Biomedical Engineering

Peripheral Artery Disease (PAD) is characterized by the buildup of atherosclerotic plaque in the lower extremities that occludes blood flow, and affects over 200 million people worldwide. Without effective treatment, PAD can lead to claudication, ischemia, ulcers, and gangrene. PAD causes more amputations in the United States than any other condition, and for severe cases that require revascularization, procedures benefit fewer than 50% of patients. This demonstrates a clear need for alternative therapies. Potential therapies for PAD target expansion of collateral blood vessels around the area of occlusion – a process called arteriogenesis to compensate for loss of blood flow …

Tourniquet Tester, Tyler Offerman, Thuy Nguyen, Ryan Ly, Cody Hoeptner

Biomedical Engineering

The Tourniquet Tester is a device intended to be used as a standardized testing device for tourniquets. Due to the lack of a standard testing device for testing tourniquets that can produce accurate and reproducible results, it is difficult to test the efficacy of tourniquets currently being sold on the market. A standard testing device that can produce consistent and reproducible results would allow tourniquet manufacturing companies to properly test the efficacy of their product and develop proper guidelines and directions for users of the product. Medical professionals and military personnel who may use tourniquets in their line of work …

Babycheck, Ayla V. Campbell, Eleanor M. Tweedy

Biomedical Engineering

The BabyCheck project was created to design and test a device that can collect a small blood sample from the fetal scalp during labor. The goal is to reduce uncertainty when fetal heart rate tracings are unclear, especially in Category II cases where it can be difficult for clinicians to decide the safest next step. Current monitoring methods either rely on interpreting heart rate patterns or use more invasive procedures to gather biochemical information. BabyCheck was designed to provide a simpler and more controlled way to collect a small blood sample that could help guide these decisions.

The final prototype …

Jaundease Phototherapy Vest Test Plan, Sujay Panthulu, Jasdev Banwait, Gwynn Moss, Solomon M. Fernandez

Biomedical Engineering

Neonatal hyperbilirubinemia is a common condition affecting more than 60% of newborns, caused by an excess buildup of bilirubin in the blood due to the liver’s limited ability to process it efficiently [1]. The standard treatment involves hospital-based phototherapy, where infants are placed in incubators under blue light to break down bilirubin in the skin. Although effective, this approach requires infants to remain under the lights for 12–18 hours per day, often with eye protection, and separated from their parents—disrupting early bonding and potentially contributing to toxic stress that can impact neurological and emotional development [2]. While at-home phototherapy solutions …

Improving Cellular Retention And Distribution To Promote Arteriogenesis In A Mouse Model Of Chronic Arterial Occlusion, Nancy Huang

Biomedical Engineering

Peripheral Arterial Occlusive Disease (PAOD) affects millions of people in the United States, creating pain, discomfort, and limited mobility due to restricted blood flow from obstructed arteries. While current treatments include lifestyle changes and revascularization procedures, these options are often insufficient or inaccessible because of procedural pain and socioeconomic barriers. In some cases, this can lead to critical limb ischemia and amputation as a last resort. Increasing blood flow to the extremities by enhancing collateral vessel growth, a biological process called arteriogenesis, with cell-based therapies can redirect blood flow around obstructions and has potential to mitigate and treat the effects …

Iud Insertion Pain Management, Sandhya Sridhar, Olivia Armas, Lucy Campochiaro

Biomedical Engineering

This project focuses on developing an atraumatic cervical stabilization device that serves as a modern alternative to the traditional tenaculum used during IUD insertion procedures. Current devices rely on sharp metal prongs that pierce the cervix and often cause significant pain and bleeding. The goal of this project is to design a device that provides the same stability and control for clinicians while eliminating the need to puncture cervical tissue. The device is intended to be used by gynecologists, nurse practitioners, physician assistants, primary care physicians, or any medical professional performing an IUD insertion. The device is intended to be …

Cpap Belly Prevent, Alek Corpuz, Emma Hoffman, Danielle Tran

Biomedical Engineering

Neonates with low gestation periods often face complications such as respiratory distress syndrome, or RDS, which increases risk for complications such as necrotizing enterocolitis. Use of bCPAP helps facilitate regular breathing, but can also force air into the stomach and consequently cause abdominal distention. Clinicians currently use an already inserted feeding tube to vent the accumulated air, however this interrupts the feeding process.

The PreVent device was developed to allow for simultaneous feeding and venting. The dual function minimizes interruptions to NICU nurse workflow and improves capability to relieve abdominal distention before the onset of adverse complications.

Newborn Spinal Needle, Allison Inouye, Kyle Morton, Evan Russell

Biomedical Engineering

Spinal punctures, or lumbar punctures, are important diagnostic procedures used to collect cerebrospinal fluid (CSF) to diagnose issues in the central nervous system (CNS) such as meningitis. While these procedures are routinely performed on adult and neonatal patients, the current tools are not optimized for use on newborns. Existing spinal needles are often modified versions of adult devices, leading to challenges in fluid collection efficiency, user ergonomics, and patient safety when used in neonatal care.

The Newborn Spinal Needle Project aims to design and develop a spinal needle specifically optimized for neonatal anatomy and clinical workflow. The goal is to …

Orthopedic Bone Drill, Logan G. Schmid, Matthew T. Wold, May Geng

Biomedical Engineering

This project aims to design a bone drill for orthopedic procedures which alleviates the heat generated in the bone during drilling.

Establishing Procedures For Primary Human Myoblast Cell Culture, Erica Duffy

Biomedical Engineering

Peripheral Artery Disease (PAD) affects an estimated 200 million people worldwide and is the leading cause of amputation in the United States. PAD is characterized by atherosclerotic narrowing of arteries, resulting in ischemia from reduced blood flow to distal tissues. Although surgical and percutaneous interventions can restore perfusion, fewer than 50% of patients experience sustained benefit, highlighting the need for alternative therapeutic strategies. One promising approach is promoting arteriogenesis, the growth and outward remodeling of pre-existing collateral vessels that improve blood flow around the occluded arteries. Arteriogenesis is regulated by regenerative, M2-polarized macrophages, making macrophage polarization a key therapeutic target. …

Electroporation Protocol Development For Cal Poly Cell Therapy Laboratory Courses, Gabrielle Melamed

Biomedical Engineering

Cancer is a heterogeneous disease caused by unchecked cell proliferation. The disease contributed to 9.7 million deaths worldwide in 2022, with hematological malignancies (leukemias, lymphomas, and myelomas) accounting for over 1.4 million deaths in the United States from 1999 to 2020. This thesis focuses on the treatment of these cancers, with an emphasis on non-Hodgkin lymphomas (NHLs). R-CHOP (Rituximab-Cyclophosphamide, Doxorubicin hydrochloride, Oncovin/Vincristine, and Prednisone) is the standard of care first-line treatment for diffuse large B-cell lymphoma (DLBCL), the most common subtype of NHL, and encompasses a mixture of chemotherapy, immunotherapy, and corticosteroids. The R-CHOP regimen cures 50% to 70% patients, …

Biofeedback For Upper Limb Bionics, Arissa Anaya, Adam Moger, Connor Bly, Theodore R. Hughes

Biomedical Engineering

The purpose of this document was to present a senior design project from Cal Poly sponsored by Matt Robinson at the Hanger Clinic in San Luis Obispo to provide biofeedback for users of upper limb protheses. This project focuses on individuals with trans-radial upper limb amputations, including patients with congenital limb deficiencies who use trans-radial prosthesis, who receive very little or no sensory feedback from their prosthetic device. This sensory feedback device was intended to be used as a training tool with a myo-electric hand-like upper limb prosthesis in a clinical setting. This document provides an overview of the different …

Biostride - Prosthetic Charging Stand, Abigael Howard, Brett Matich, Allie Mcauliffe, Liam Harwood

Biomedical Engineering

This Final Report outlines the development of a lower limb prosthetic docking and charging station to address a critical need for individuals with unilateral transfemoral amputations who use microprocessor-controlled prosthetics. This project is focused on designing and producing a secure, accessible, and aesthetically pleasing stand to store and charge prosthetic limbs overnight, targeting the lack of commercially available, functional prosthetic storage. The absence of a functional storage solution points to a failure in meaningfully addressing the human needs of prosthetics users, exacerbating user frustration through the perpetuation of issues including prosthetics falling over into inaccessible positions, and tripping hazards due …

Force Mapping Wand For Individuals With Upper-Limb Amputations, Max Bosse, Cole Capitani, Eddie Grassini

Biomedical Engineering

Technology relating to upper-limb amputations has seen many advances in recent years, especially in terms of function and aesthetic appeal. Although these improvements exist, comfort is often a primary concern among prosthetic users and can lead to prosthetic abandonment [1]. Without a standardized method of measuring force concentrations in patients, high rates of discomfort and potential tissue damage remain. The goal of this project is to create a force mapping system for upper-limb amputees to help minimize discomfort in socket fit during the fitting process using real-time data and software to view force concentrations. To accomplish this goal, background research …

Cruising On The Beach (Cob), Juan Diego Molina Ii, Ashley Kianna Burga

Biomedical Engineering

This report details the design and development process of Cruising on the Beach (COB), a modular motorized wheelchair intended to improve beach accessibility for high school students with mobility impairments. The project aimed to create an affordable, portable, and sand-capable device using balloon wheels, an adjustable control panel, and a customizable base. Extensive background research, market analysis, design modeling, and test plans were completed. However, final fabrication was not achieved due to financial constraints and limited access to industrial machining tools needed for custom metal components. Despite these setbacks, the project delivered a robust conceptual design and a fully …

Investigating The Effects Of Hepatocyte Growth Factor On Primary Myoblast Proliferation, Grace Heller

Biomedical Engineering

Peripheral artery occlusive disease (PAOD) is a progressive vascular condition that affects over 200 million people worldwide and approximately 8 million in the United States. It is characterized by atherosclerotic narrowing of peripheral arteries, leading to reduced blood flow, ischemia, and, in severe cases, tissue loss and limb amputation. Although surgical revascularization is the gold standard, many patients—particularly those with comorbidities like diabetes— continue to experience poor outcomes, emphasizing the need for alternative therapies. One promising strategy is to enhance collateral arteriogenesis, the remodeling and enlargement of collateral arterioles that naturally bypass occluded vessels. Satellite cells (SCs), which give rise …

Realistic Bionic Arm Development For Transradial Amputation, Bailey A. Wall, Lilly Noel Curdy, Ruthie Mccall, Courtney Mahoney, Andres Trejo

Biomedical Engineering

The VeraLimb realistic bionic arm is intended for use by individuals with a trans-radial amputation or congenital limb deficiency below the elbow to provide functional hand and arm movements. This advanced prosthetic device is designed to mimic a biological hand's natural motion, dexterity, control, and aesthetic, giving the user a higher sense of restored limb functionality. It offers an experience that closely restores motor function in a way that resembles having a natural hand rather than interacting with a mechanical device. The VeraLimb is suitable for daily activities, allowing users to grasp, manipulate, and interact with objects. It is designed …

Operating Room Forcing Function, Olivia Rankin, Makena Moragne, Sasha Rovinsky

Biomedical Engineering

The Operating Room Forcing Function system aims to address the persistent issue of wrong-site, wrong-procedure, and wrong-patient errors (WSPEs) in surgical settings. WSPEs are largely caused by circumvention of the timeout procedure (a planned pause before incision to stop and confirm crucial details of the procedure to be performed known as ‘The Universal Protocol’). The goal set forth by our sponsor, Dr. Robert Turbow, is to develop a lock-out mechanism that requires a timeout to be performed by all appropriate personnel before an operation can begin.

Hospitals are extremely complex systems with competing values, productivity pressures, fast paced work, tight-coupled …

The Suture Guide, Nicole Schnettler, Ciara Murphy, Jocelyn Corona Cabrera

Biomedical Engineering

In the surgical field and specifically wound closure, there is a growing demand for techniques that allow surgeons to quickly, accurately, and ergonomically close surgical wounds while still optimizing patient recovery and not compromising the cosmetic appearance in wound closure. Currently more advanced and developed products exist for laparoscopic suturing, but not for superficial suturing. This project aims to find a way to close the most superficial layer of the skin in surgical incisions that is faster and more comfortable than current suturing techniques. The design process began with stakeholder interviews and market research, identifying key shortcomings of current manual …

Treating Ground Water For Agricultural And Individual Consumption, Gabby Miller, Bronson Scott, Michael Clawson

Biomedical Engineering

This project, conducted in collaboration with Cal Poly seniors and Da Vinci High School students, aims to develop a solar-powered groundwater purification system. This system is designed to provide clean water for agricultural use and individual consumption, addressing the growing concerns of groundwater contamination and accessibility needs. The final prototype integrates a gravity filtration system combined with chemical purification, utilizing aluminum sulfate and chlorine to remove particulates, bacteria, and organic compounds.

The research phase involved an extensive review of groundwater contamination issues, existing filtration technologies, and market analysis. Key design constraints included cost-effectiveness, ease of maintenance, and minimal energy consumption, …

Tiny Temp Neonatal Intensive Care Unit Infant Temperature Monitor, Alexandria Lukacsffi, Sydney Dedrick

Biomedical Engineering

This document outlines the key steps taken in the specification, design, and functionality of the Tiny Temp Neonatal Intensive Care Unit Infant Temperature Monitor. The BICEP team identified temperature monitors for infants in incubators in the NICU as an area of need after surveying hospitals in the San Luis Obispo area. Current thermometers are oversimplified in design, consisting of only the temperature probe and a piece of adhesive holding the probe directly onto the infant's skin. As a result, the adhesive is weak to prevent harm to the infant and, therefore, falls off the infant easily and frequently, posing a …

Peripheral Vagus Nerve Stimulation (Pvns) Device For Epilepsy, Logan P. Beckstrand, Alexander P. Crary, Grace E. Heller

Biomedical Engineering

Our research team developed a PVNS for Epilepsy device which is intended to act as a preventative measure against seizures for patients with epilepsy. The device is a less invasive alternative to the VNS device on the market using electroacupuncture at the Shenmen and Xin points along the posterior pinna to stimulate the vagus nerve.

Sprinter Start Block Training Aid, Kayla Lovejoy, Kevin Almontes

Biomedical Engineering

Currently, track and field sprinters ranging from beginner level to world-class have no practical tool that provides quantitative feedback of value on quality of start and quality of the three distinct phases of their sprint race, such that they can quantify the value of their adjustments. Our team will create a device that integrates with the sprint starting block to provide quantifiable data on the quality of a sprinter’s start. This Statement of Work describes drawbacks of current solutions, existing patents, customer requirements, engineering specifications, and our project plan.

Maglock - Electromagnetic Pedal Aid For Amputees, Minh Vo, Matthew Chew

Biomedical Engineering

For this project, we aimed to design components that could easily be swapped out and into vehicles, which would help them accomplish the task of locating and securing a prosthetic foot to a bike and/or car pedal. A common problem among cyclists and drivers with prosthetic legs is their foot slipping off the pedal while in use; these components could be used for other common applications such as cars, bikes, etc. Stakeholders for this product included automotive companies and handicap product distributors. The focused objective is to provide dexterity and quick attach/detach support for cyclists and drivers with lower limb …

Finite Element Analysis Of The Bearing Component Of Total Ankle Replacement Implants During The Stance Phase Of The Gait Cycle, S J. Hazelwood, Mohammad N. Noori, Naudereh B. Noori, Timothy S. Jain, Amanda Anderson, Joseph Rencis

Biomedical Engineering

Total ankle arthroplasty (TAA) is a motion-preserving treatment for end-stage ankle arthritis. An effective tool for analyzing these implants’ mechanical performance and longevity in silico is finite element analysis (FEA). An FEA in ABAQUS was used to statically analyze the mechanical behavior of the ultra-high-molecular-weight polyethylene (UHMWPE) bearing component at varying dorsiflexion/plantarflexion ankle angles and axial loading conditions during the stance phase of the gait cycle for a single cycle. The von Mises stress and contact pressure were examined on the articulating surface of the bearing component in two newly installed fixed-bearing TAA implants (Wright Medical INBONE II and Exactech …