Biomedical Engineering and Bioengineering Commons^™

Acl Risk Data Comparison And Turnout Analysis Of Female Dancers Trained In Ballet And Female Traditional Jumping Sport Athletes, Samantha A. Campbell

Master's Theses

INTRODUCTION: An increase in participation in females sports has created an increase of female athletes at risk for injuring their Anterior Cruciate Ligament(ACL)[12,21,29,44]. Traditional jumping sports have the highest rate of non contact ACL injuries, due to the use of movements of cutting, pivoting and landing on one foot[5,8,32,33,38]. ACL injuries can also be attributed to neuromuscular deficits such as the ‘Ligament Dominance Theory’, ‘Quadricep Dominance Theory’, ‘Trunk Dominance Theory’ and the ‘Leg Dominance Theory’[24,33]. The neuromuscular deficits are muscle strength, power or activation patterns that can cause an individual to have an increased risk of ACL injury[33]. Female traditional …

Optimization Of A Novel Nipam-Based Thermoresponsive Copolymer For Intramuscular Injection As A Myoblast Delivery Vehicle To Combat Peripheral Artery Occlusive Disease, Quentin R. Klueter

Master's Theses

There is a need for a minimally invasive delivery method to enable cell therapies to combat peripheral artery occlusive disease (PAOD) in end stage patients. Myoblasts show promise as a cell mediated therapy but warrant an improved delivery method to increase cell retention in the region of interest because of their adherent nature, relative to previously used BM-MNC’s that are non-adherent. Contemporary issues with achieving successful cell therapies of vasculature can be mainly characterized by the lack of clinical translation from promising animal studies and absence of cell delivery scaffolding. Naturally, polymers have been widely experimented with as grafts to …

Impact Of Primary Myoblasts On Macrophage Polarization In-Vitro, Olivia Welch

Master's Theses

Peripheral artery disease (PAD) is characterized by the development of atherosclerotic plaques on arterial walls, leading to the narrowing of blood vessels, resulting in ischemia in the downstream tissue. In the United States, 12% of the adult population is affected by PAD and its related symptoms. Current surgical revascularization techniques can be effective in part of the patient population, but there is a need for other options. Alternatively, collateral blood vessels, or natural bypass arteries, enlarge to increase blood flow to the ischemic tissue in a process called arteriogenesis, which has been studied as a therapeutic option. Cell-based therapies, such …

Youth Pitching Kinematics: Associations With Body Overweight Parameters, Christina K. Fong

Master's Theses

The objective of this study was to investigate associations between injury-related kinematic parameters and overweight measures for youth baseball pitchers. The injury-related kinematic parameters considered were measurements 1) at foot contact: stride length, front foot position, shoulder external rotation, shoulder abduction, and elbow flexion; 2) between FC and ball release: peak knee extension; and 3) at BR: shoulder abduction. Data from three separate collection sites examined pitching mechanics of 18 10- to 11-year-old pitchers, 11 14- to 16-year-old pitchers, and 104 16- to 18-year-old pitchers Linear regression analyses were performed to determine significant correlations between kinematic parameters and body mass …

Bone And Cartilage Compression Simulator, Karoline M. Wucherer, Benjamin A. Parmentier, Thomasina E. Hinkle

Biomedical Engineering

A device was developed that delivers mechanical loads to bone and soft tissue samples under physiological conditions to aid in the research of tissue engineering bone and cartilage. To begin the design process, a Network Diagram and Gantt Chart were produced to create a general timeline for the project to follow. This allowed us to measure our progress and determine what effects (if any) delays could have on our project.

Live Cell Imaging Gas Control, Elsa M. Bean, Brady C. Berg, Abby A. Jens

Biomedical Engineering

The following document outlines the entire process for designing and manufacturing a Live Cell Imaging Gas Control subsystem in tandem with the Heated Stage subsystem to make a CO₂ and temperature-controlled chamber for use with the Olympus IX73P2F Microscope. It highlights the current literature and patents surrounding live cell imaging and touches on the existing live cell imaging setups currently being used by other entities. Following this, it defines the scope of the project, key customer requirements, and engineering specifications to ensure the design meets all the needs of its users. This document includes project planning steps to establish …

Live Cell Imaging Heated Stage, Kerri Byrne, Anna Frauenheim, Simon Park

Biomedical Engineering

Live cell imaging is a method used by scientists to obtain a better understanding of tissue and cell functions through the study and imaging of cellular dynamics, however it is often detrimental to cell cultures due to effects of changing environment on dynamic cellular events. In order to combat the effects of a changing environment, our team has designed, manufactured, and tested an incubation chamber that will control the heat and pH environment that these cells are experiencing throughout the imaging process. This project is sponsored by the BMED microscopy core group to be used with the Olympus IX73P2F inverted …

Minivette Integrated Sample Prep Funnel For Cepheid Cartridges, Hanna N. Blumer, Sophia Arias, Camille Porciuncula, Ben Runkle

Biomedical Engineering

This report covers the redesign of the Sample Prep Funnel for Cepheid’s engineering team. The Sample Prep Funnel, responsible for relaying liquid from the sample collection device to the testing cartridge, experiences fluid loss that causes invalid test results. Our group's task was to redesign this funnel to minimize fluid loss and, overall, increase efficiency and effectiveness.

Pickleball Paddle For Minimizing Elbow/Shoulder Joint Forces, Kaley Sapper, Nick Rodgers, Claire Steines

Biomedical Engineering

The goal of this project was to design a pickleball paddle to prevent overuse injuries. This was accomplished through a design that minimizes joint forces experienced by the player during backhand strokes.

Feverdots, Kameryn Laureano, Heidi Silk, Rita Grigorian

Biomedical Engineering

FeverDots are wearable temperature sensitive stickers that change color from black to pink at 99°F when placed on the temple or forehead. The objective of this project was to develop an efficient manufacturing method for FeverDots, and manufacture a device along with it. To create the FeverDots manufacturing device, the full design process was executed. The team went through a thorough ideation phase before ultimately defining and specifying the scope of the project.

The key customer requirements of this device include that it is lightweight, portable, durable, simple to assemble, easy to use, and able to generate uniform ink and …

Astm Test Fixture For Spinal Screws, Sarah K. Pickering, Matthew W. Rowen, Kaajal N. Khanna, Thomas A. Sunding

Biomedical Engineering

This document is an overview report of the Cal Poly Senior Project ASTM Test Fixture for SeaSpine orthopedic bone screws. The main application of orthopedic screws is to fasten implants directly to the bone structure, enhancing structural integrity. Testing for breaking angle, insertion torque, removal torque, axial pullout strength, and self-tapping force as specified in the ASTM F543 Annexes provides the FDA with vital screw mechanics and ensures manufacturing uniformity. The test system is comprised of custom and off the shelf components allowing for interchangeability, in case of part failure, and a low overall cost. It is mechanically capable of …

Integration Of Electrical Impedance Spectroscopy For Multichannel Cell Culture Measurement, Conard Chan

Master's Theses

ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY (EIS) has been widely used to study the electrical properties of biological material due to its non-invasive nature and experimental reliability. However, most of the precision impedance analyzers used in EIS only provide single- or two-channel measurements which are inadequate for larger-scale multiplexed measurements, such as those found in modern microfluidic cell culture experiments. The Biomedical Microsystems Laboratory has developed a 16-channel cell culture platform with integrated electrode arrays for monitoring cell growth and electrical properties (i.e., the so-called “electrical phenotype”). In this paper, a system consisting of a 16-channel solid-state analog multiplexer (MUX)paired with a low-cost, …

3-In-1 Medical Lancet, Jonathan J. Panella, Gage Vogtlin, Marissa Koski, Benjamin Neyland

Mechanical Engineering

First responders need a quick, sterile, and convenient way to sample blood for glucose testing because glucose levels are a vital metric in assessing time-critical emergency situations. The blood sampling process consists of pre-sterilizing the sample site on the skin with an alcohol pad, pricking the skin with a lancet, and lastly, after sampling, putting a bandage over the prick site. The scope of this project is to design a device which integrates and streamlines the use of the three sub-processes (sterilization, lancing, and bandaging) while upholding the necessary requirements of a single-use medical device and considering other factors which …

Classifying Electrocardiogram With Machine Learning Techniques, Hillal Jarrar

Master's Theses

Classifying the electrocardiogram is of clinical importance because classification can be used to diagnose patients with cardiac arrhythmias. Many industries utilize machine learning techniques that consist of feature extraction methods followed by Naive- Bayesian classification in order to detect faults within machinery. Machine learning techniques that analyze vibrational machine data in a mechanical application may be used to analyze electrical data in a physiological application. Three of the most common feature extraction methods used to prepare machine vibration data for Naive-Bayesian classification are the Fourier transform, the Hilbert transform, and the Wavelet Packet transform. Each machine learning technique consists of …

Characterizing Direction Specific Ganglion Cell Receptor Activation Using A Perturbation Based Decomposition Method, Camila Paola Monchini Moline

Master's Theses

Characterizing postsynaptic current signals in the retina by neuroreceptor activation frequency is important for studying the mechanism of action behind phototransduction of varied visual stimuli. A better understanding could in turn lead to the creation of methods for early detection and prevention of debilitating optical neuropathies, such as glaucoma, age-related macular degeneration, and retinitis pigmentosa. More recent in-vitro and in-vivo studies have aimed to differentiate the effects of various neurotransmitters, such as acetylcholine, GABA, and glutamate, on receiving and processing different types of visual stimuli from the retina into the visual cortex.

The focus of this work will be to …

Assessing The Effects Of Oxaliplatin On An In Vitro Three-Dimensional Human Colorectal Cancer Model, Sabrina Nelson

Master's Theses

Colorectal cancer is the third most common cancer in the United States with a 5-year late-stage survival rate of only 14%. Due to the lack of translation between animal models and clinical trials as well as the inefficacy of many chemotherapeutics in initial clinical trials, researchers are turning to in vitro drug screening models in an effort to mimic the conditions in vivo. This research project aimed to validate an in vitro tumor culture model within a microfluidic device using a clinically relevant chemotherapy drug. The first experiment consisted of a cell density and drug concentration study to determine …

Subclinical Atherosclerosis Quantified Through Cumulative Shear Measurement, Margaret Lynne Papka

Master's Theses

With the high mortality rate of cardiovascular disease, it is important to study the early signs. The early detection of cardiovascular disease can lead to saved lives. Currently the most prevalent detection methods are the Framingham Risk Score and the carotid intima media thickness, both of which are insufficient. The necessary tool for early detection requires a uniform quantification system. The stimulus leading to endothelial dysfunction, the most significant predictor of a major adverse cardiovascular event (MACE)—and subsequently subclinical atherosclerosis—is reduced shear stress. Increased surface relative roughness affects the flow profile transition from laminar to turbulent resulting in reduced shear …

Noninvasive Measurement Of Arterial Compliance With A Blood Pressure Cuff Using A Surrogate Arm Bench Top Model For Oscillometric Use, Shane Wilsey

Master's Theses

A surrogate arm model was created that is capable of being used for oscillometry. This model is capable of being used as a bench top model for blood pressure cuff devices. The arm consists of endplates and internal supports that are 3D printed with ABS, a silicone rubber outer sleeve, and interchangeable arteries made from two silicone rubber strips glued together at the edges. The interchangeable arteries have varying compliances that can be used as different inputs for oscillometric testing. A process was established to measure the artery compliances with a curve fit correlation of 0.95. However, testing revealed that …

Modeling Action Potential Propagation During Hypertrophic Cardiomyopathy Through A Three-Dimensional Computational Model, Julia Elizabeth Kelley

Master's Theses

Hypertrophic cardiomyopathy (HCM) is the most common monogenic disorder and the leading cause of sudden arrhythmic death in children and young adults. It is typically asymptomatic and first manifests itself during cardiac arrest, making it a challenge to diagnose in advance. Computational models can explore and reveal underlying molecular mechanisms in cardiac electrophysiology by allowing researchers to alter various parameters such as tissue size or ionic current amplitudes. The goal of this thesis is to develop a computational model in MATLAB and to determine if this model can accurately indicate cases of hypertrophic cardiomyopathy. This goal is achieved by combining …

Portable Ventilator, Bradley C. Weeks, Jack W. Brewer, Sanders Sanabria

Electrical Engineering

The current COVID-19 pandemic has heavily impacted the healthcare system in the United States and elsewhere. The need for patients to have access to a hospital with a ventilator along with a shortage of ventilators for recovery and at-home care as a result of minimal hospital vacancy for patients has been greatly stressed. The presented problem is both an unmet demand and supply of portable and effective ventilators. Existing ventilators have many shortcomings that should be addressed: size, weight, cost, and complexity of current ventilators confines users to stay in a medical facility whilst being monitored by professionals. This both …

Flywheel Fanny Pack Balance Assist, Ella Joy Mahood, Jason Scott Provol, Raymond Ming Tseng

Biomedical Engineering

The aim of this project is to develop a wearable device that will provide support to a balance impaired individual. The device will be predicated on the principle of gyroscopes. It will include a rapidly spinning flywheel, which will resist any changes to spatial orientation.

Handheld Transvaginal Probe For Pap Smear Exams, Kim Knollenberg, Taeah Truong

Biomedical Engineering

This project aims to discard the use of the speculum in pap smear exams. A pap smear is a procedure that tests for cervical cancer in individuals assigned female at birth (AFAB) by screening cells collected from the cervix. Speculums are utilized in these examinations, as well as other gynecologic examinations and procedures. Due to the stigma and racist and misogynistic history of the speculum, we moved to design a device that removes the need for specula in pap smear exams. This device will aim to decrease the cervical cancer mortality rate and reduce the stigma around pap smear exams.

3-D Positioning System For Trackable Adjustments Of Papillary Muscles, Ryan Michael Winters, Micaela Andrea Bataclan, Christine Do, Giselle Morales

Biomedical Engineering

Redacted.

Hand Strength And Dexterity Enhancer, Julia Ann Denison, Autumn B. Rexford, Melissa A. Kurani, Christina K. Fong

Biomedical Engineering

Good Grips created the hand strength and dexterity enhancer project to meet the challenge presented by Bill Phelps. He has Inclusion Body Myositis (IBM), an inflammatory muscle disease characterized by progressive muscle weakness and atrophy. Bill has limited strength in both hands and lost the ability to bend his fingers, making it difficult to grip anything. He needed a device that would help with everyday tasks such as writing, lifting, and holding various objects.

Our team consists of four engineering students attending Cal Poly, San Luis Obispo. We researched, designed, manufactured, and tested a device that would fulfill the problem …

Automatic Tourniquet For Military Emergencies, Arshia Nazerani Houshmand, Marina Felt, Blake Juett

Biomedical Engineering

This document contains the progress and development of an automated tourniquet that would be intended for use within the United States military. The project was student-led and sponsored. Coordination and confirmation of our device was provided by Dr. John F. Kragh, who is part of the U.S. Army Institute of Surgical Research. The document will outline the research conducted on tourniquets, specification development of the tourniquet, morphology process, and final design production of the automatic tourniquet.

Evaluation Of Blood Vessel Mimic Scaffold Biocompatibility, Nicole M. Abraham

Master's Theses

The Tissue Engineering Research Lab at California Polytechnic State University, San Luis Obispo focuses on creating tissue-engineered blood vessel mimics (BVMs) for use in preclinical testing of vascular devices. These BVMs are composed of electrospun scaffolds made of an assortment of polymers that are seeded with different cell types. This integration of polymers with cells leads to the need for biocompatibility testing of the polymer scaffolds. Many of the lab’s newest scaffolds have not been fully characterized for biologic interactions. Therefore, the first aim of this thesis developed methods for in vitro cytotoxicity testing of polymers used in the fabrication …

Microfluidic Electrical Impedance Spectroscopy System Automation And Characterization, Keaton Frahmann

Master's Theses

In this work, a novel microfluidic cell culture platform capable of automated electrical impedance measurements and immunofluorescence and brightfield microscopy was developed for further in-vitro cellular research intended to optimize cell culture conditions. The microfluidic system design, fabrication, automation, and design verification testing are described. Electrical and optical measurements of the 16 parallel cell culture chambers were automated via a custom LabView interface. A proposed design change will enable gas diffusion, removing the need for an environmental enclosure and allow long-term cell culture experiments. This "lab on a chip" system miniaturizes and automates experiments improving testing throughput and accuracy while …

The Impact Of Myoblast Transplantation On Collateral Capillary Arteriogenesis And Macrophage Phenotype, Christine Hue Do

Biomedical Engineering

Gangrene, pain, loss of limb function, amputation, and death are only few of the grievous consequences associated with peripheral arterial disease (PAD), a vascular disease caused by an obstruction that narrows the blood vessels. Since some patients have collateral vessels that can re-route blood to its downstream destination, much focus has been spotlighted upon discovering the mechanism of this process, termed arteriogenesis, as well as cell therapies to increase arterial diameter of collateral vessels. Since some patients do not have native pre-existing collateral vessels, another method to re-route blood is through arterialized collateral capillaries (ACC), which is the conversion of …

Calibrated Tensioner For Total Knee Arthroplasty Gap Balancer, Lauren Henigman, Jaypreet Dhanota, Corey Catuara

Biomedical Engineering

The purpose of this project was to design a device that interfaces with the previously created gap balancer to simultaneously measure the gap between the femur and tibia and measure the tension in the ligaments of the knee. First, we met with Dr. Delagrammaticas to outline the key customer requirements: we wanted the device to be precise, sterilizable, reliable, and compatible with the gap balancer. Based on the customer requirements, we outlined the specifications that would drive our design and testing, which included precision, ease of use, size, and material properties. The design process began by using a morphology to …

Stair Wagon To Heaven, Maria Cristina Solis Andrade, Nick Ryan Dion, Alexander Pham

Biomedical Engineering

Our design process began with developing a list of questions for our sponsor based on the problem statement we were provided. We took these questions to interview our sponsor. From this interview, we derived a series of customer requirements, which were then used to develop our more specific engineering specifications (Table 8.1). We used these engineering specifications to develop a design morphology. Each of our group mates used the concepts from our design morphology to develop their own full concept sketches. We used Pugh charts to compare the different aspects of each design. The designs were compared based off their …