Biomedical Engineering and Bioengineering Commons^™

The Role Of The Scenario In Formulating The Contemporary Architectural Text, Rounaq Arif Mohsin, Abbas Ali Hamza, Bashar Shamil Alkhafaji

Al-Esraa University College Journal for Engineering Sciences

In order to create an integrated architectural text, which is a complicated art that blends beauty and practical elements, a rigorous design procedure is necessary. In this situation, the scenario’s role becomes crucial in developing the current architectural text and directing architectural approaches. In order to better understand how the scenario influences the design process and the interactions between various architectural aspects, this project intends to explore and analyze the impact of the scenario in developing and refining architectural text formulation approaches.

The study looks at the idea of a scenario and how it has been used in architecture, as …

Investigation Of Some Physical Properties Of Slurry Infiltrated Fibrous Concrete (Sifcon) Under Different Curing Times, Rand Kh. Mahmoud, Mohmmed Juad Khadhim, Fayq Hasan Jabbar

Al-Esraa University College Journal for Engineering Sciences

This research studied the effects of different types fibers (Basalt, Carbon and Basalt-Carbon hybrid mix) and curing ages (7, 14, 28 and 56 days) on some physical properties of - Slurry infiltrated fibrous concrete (SIFCON). Density, ultrasonic pulse velocity UPV, Poisson’s ratio and water absorption were measured for the experimental study with 30% cement replacement by Class F fly ash to increase sustainability. It was found that properties were significantly affected by the type and dosage of fiber admixture. The UPV was enhanced by basalt fibers and the absorption reduced up to an optimal range of 3–5% after which agglomeration …

Mechanical And Durability Properties Of Cement Panels Reinforced With Hybrid And Pva Fibers, Shukran H. Faraj, Mohammed J. Kadhim

Al-Esraa University College Journal for Engineering Sciences

This study examines the synergistic effects of hybrid fibers (HF) and polyvinyl alcohol (PVA) fibers on the structural and thermal properties of silica-fume cement panels. Scanning electron microscopy (SEM) was employed to examine mortar mixtures with varying fiber content to assess their enhancement of microstructure. We conducted several experiments on compressive, flexural, and splitting tensile strength, in addition to water absorption and thermal conductivity. The results indicate that 1% HF exhibits superior mechanical qualities, with a compressive strength of 46.89 MPa, a flexural strength of 8.56 MPa, and a reduced thermal conductivity of 0.83 W/m•K. PVA fibers at 2% enhance …

Experimental Analysis Of Droplet Deformation Dynamics In Combined Dc Electric And Shear Flow Fields Using Dpiv, Ayad Ibrahim Khlewee

Al-Esraa University College Journal for Engineering Sciences

This paper presented a systematic study of such droplet deformation at the intersection of uniform DC electric field and hydrodynamic shear flow, in which we focused on conductivity ratio (R) and permittivity ratio (S), describing their influence. The results demonstrate that droplet dynamics is extremely sensitive to the regime: under DC only, either elongation or compression depending on whether R > S or R S, similarly to classical EHD predictions. Under shear-only conditions, deformation was dictated by the balance of elongational stresses (EC) and rotational stresses (RC), with increasing capillary number (Ca) leading to progressive elongation and oscillatory orientation dynamics. When …

The Imaginary In Architecture: The Conceptual Structure Of The Imaginary And Its Manifestations In Architectural Text, Noora Ghadir Hlail, Abbas Ali Hamza Al Greiza

Al-Esraa University College Journal for Engineering Sciences

This study explores the concept of the imaginary as a collective cognitive and cultural structure that shapes symbolic reality through images, myths, and deeply rooted symbols in collective memory. The research applies this concept within the field of architecture, aiming to understand how the imaginary is embodied in architectural texts as symbolic carriers of identity and cultural meaning. Adopting a descriptive-analytical methodology, the study develops a theoretical framework comprising key components—preconditions, mechanisms, and traits of the imaginary—and applies it to two selected case studies: the General Secretariat of the Iraqi Council of Ministers and the Louvre Abu Dhabi Museum. The …

Generative Ai For Method Development In Analytical Chemistry: A New Paradigm In Experimental Design And Optimization, Yasir Fathi Mahmood

Al-Esraa University College Journal for Engineering Sciences

The fast development of artificial intelligence (AI), especially generative AI models, is changing the environment of analytical chemistry. As classical method generation in analytical methods relies on manual trial-and-error methodology as well as statistical methods, generative AI is a new paradigm with automated generation of experimental methodology and optimization. In this paper, the authors discuss the use of generative AI-based technologies, including large language models (LLMs) and neural network-based generators, to create new, efficient, and customized methods of analysis. The paper examines existing applications, technology frameworks, and issues and offers a roadmap with regards to the future incorporation of generative …

Numerical Modeling And Experimental Validation Of A High-Temperature Latent Heat Thermal Energy Storage System Using Metallic Phase Change Materials For Concentrated Solar Power Applications, Fouad Hashim Sharhan

Al-Esraa University College Journal for Engineering Sciences

To ensure reliable performance for the power-block of CSP plants, high power density and near-isothermal discharge must be achieved. A robust means of achieving this is through thermal energy storage (TES). High temperature latent heat storage (LHS) with phase change materials (PCMs) can serve these purposes, however the conventional salts used in PCMs typically suffer from low thermal conductivity that limits power density and increases energy storage charging/discharging times. This manuscript investigates ways to address these limitations using high temperature metallic phase change materials (MPCMs) while also developing a validated numerical framework to aid in their design. To this end, …

Thermal Performance Evaluation Of Solar Cooling Systems For Educational Facilities In Baghdad, Yasser Alawi Mohammed Attia Al-Jubouri

Al-Esraa University College Journal for Engineering Sciences

Schools in Baghdad also suffer from poor thermal comfort, which is a common problem in high-temperature and low-humidity arid climates such as that of the city, where using cooling devices leads to a large energy demand and overloads on the national power grid. Such study offers a thorough assessment of the thermal performance of solar-based cooling systems in an efficient manner to be suitable for educational buildings in Baghdad. The analysis is centred on a solar thermal cooling system with absorption as the heat interaction medium, and an experimental characterisation and mathematical simulation itself are performed. A pilot installation, consisting …

Curing Duration Optimization To Reduce Shrinkage Cracking In One-Part Alkali-Activated Slag Concrete, A. Sadrmomtazi, H. Zanganeh

Journal of Sustainable Construction Materials and Technologies

The consequences of inadequate curing on one-part alkali-activated slag concrete (O-AAS) performance relative to ordinary Portland cement concrete (OPCC) have been investigated in this research. Prior to exposure to unsaturated conditions, samples underwent initial moist curing for durations ranging from 24 hours to one year. The testing program included compressive strength evaluation, chloride ion transport analysis, and measurement of free and restrained shrinkage. In addition, cylindrical cores were extracted from concrete columns to assess internal strength and chloride penetration resistance. Under unsaturated exposure, O-AAS exhibited a strength-aging phenomenon, with up to a 37% decrease in compressive strength over 360 days, …

Laboratory Investigation And Numerical Modelling Effect Of Carbon Nanotubes On Hot Mix Asphalt Permanent Displacement, Sepehr Saedi, Auwal Usman Nadada

Journal of Sustainable Construction Materials and Technologies

One of the primary causes of asphalt pavement deterioration is rutting; in contrast, one of the most effective methods to address this type of damage is the use of additives and quality evaluation during the design stages. In this research, laboratory testing and modeling using Abaqus software were employed to validate the laboratory results and predict and assess the potential for rutting. Carbon nanotubes (CNTs) were selected as an additive due to their exceptional mechanical properties and molecular interactions with bitumen. These nanotubes were used to modify the bitumen for the preparation of laboratory samples. The laboratory results from the …

Influence Of Early Microwave Curing On Performance Of Slag-Based Geopolymer Mortars, Ahmet Taşdemı̇R, Abdulkadir Çevı̇K

Journal of Sustainable Construction Materials and Technologies

In this article, an experimental study was conducted to examine the effect of curing time and microwave power on the compressive strength of early microwave-cured slag based geopolymers. Geopolymers have the potential to serve as an environmentally friendly substitute for cement-based building materials, and the use of microwave curing to geopolymers holds the promise of substantial strength improvement. Different microwave curing energies (300 - 800 Watts) were utilized at varying durations (10 - 60 minutes) on demoulded mortar specimens after one day. After that, compressive strength tests were conducted on both the cured and uncured specimens at three different ages: …

Use Of Alaçatı Stone Aggregate In Conventional And Self-Consolidating Concretes, Tahir Kemal Erdem

Journal of Sustainable Construction Materials and Technologies

Alaçatı stone or Alapietra stone is widely used mostly for building cladding. However, its production and use in the construction sites generate high amounts of waste (debris), causing environmental pollution in Çeşme which is a touristic district. This study investigated the reuse of Alaçatı stone as lightweight aggregate (LWA) in both conventional and self-consolidating concrete (SCC) mixtures. The concretes were prepared to have three different water-to-cement ratios (w/c), which were 0.38, 0.42 and 0.48. For each w/c, a conventional concrete mixture and two SCC mixtures with 60 or 70 cm slump flow were produced by varying the superplasticizer SP content. …

A Decision Support Model For Building Material And Component Reuse In The Context Of Circular Buildings, Havva Aksel

Journal of Sustainable Construction Materials and Technologies

Construction activities cause significant environmental impacts such as waste generation, pollution, resource consumption, and land use, which are expected to increase with global construction demands. To mitigate these environmental problems, the circular building occurs as an emerging concept depending on in the circular economy, which aims to minimize waste and redefine the “end-of-life” concept by reducing, reusing, recycling, and recovering materials. The reuse of building materials and components (BMCs) from existing structures represents a crucial strategy for achieving circularity in the built environment. Within this framework, design plays a key role. However, designing with reclaimed BMCs remains complex due to …

Durability Of Alkali-Activated Concretes Under 5% Sulfuric Acid Environment, Celal Karabaş, Anıl Niş

Journal of Sustainable Construction Materials and Technologies

The investigation focused on the resistance to 5% sulfuric acid degradation of the alkali-activated concretes (AAC). The AAC was manufactured using a blended binder of 50% slag and 50% F-type fly ash. The AAC was activated using a blend of 14 M sodium hydroxide and sodium silicate, with a hydroxide-to-silicate ratio of 1/2,5. Six AAC were produced against a 5% sulfuric acid environment, varying the binder amounts (400–500–600 kg/m3) and activator-binder (A/B) ratios (0,45–0,55). The chemical resistance of AAC was evaluated by visual appearance, variation in weight and compressive strengths. The findings pointed out that more gypsum and higher weight …

Comprehensive Risk Assessment For Construction Site Managers In Kosovo: A Mixed-Method Approach, Muhamet Ahmeti, Besian Sinani

Journal of Sustainable Construction Materials and Technologies

This study developed and validated a hybrid ISO 31000:2018 Kosovo-compliant risk assessment framework tailored for construction site managers operating within transitional economies. The research employed audits of 20 ISO-certified contractors in Pristina, Kosovo, along with field observations, interviews, and quantitative risk matrices. The findings indicate a critical concentration of risk, with 70% of firms classified as "High" or “Very High” risk. The most prevalent hazards identified were working at height without collective protection, unprotected electrical systems, and manual handling of heavy materials. Regression analysis revealed that firms with a designated safety champion achieved significantly lower risk scores, whereas those with …

Behaviour Of Internally Strengthening Hollow Stainless-Steel Hot-Rolled Circular Columns Filled With Crumb Rubber And Recycled Aggregate Concrete, Wadhah M. Tawfeeq, Mohammed M. Rasheed, Mithaq Kohees, Ahmed W. Al Zandd, Saif Al-Balushi, Hamed Al Abdul Salam

Journal of Sustainable Construction Materials and Technologies

Stainless-steel sections are increasingly being utilised in favour of their higher durability. Simultaneously, the use of recycled materials in concrete is aligned with the global concern to encourage sustainable and environmentally friendly construction. The paper examined the behaviour of stainless-steel columns filled with concrete with crumb rubber (CR) and recycled aggregate (RA). It analysed the effect of different percentages of CR (0, 15, and 30) and RA (0, 15, and 50) on the compressive strength of the concrete and the performance of the columns using stainless-steel hollow sections. 20 specimens were manufactured, 18 of which were cast with concrete containing …

Piezoelectric Concrete: A Smart Material Approach For Energy-Harvesting Structural Technologies, Dianah Mazlan, Vynotdni Rathinasamy, Naveen Kumar, Liu Chunpeng, Elango Elango

Journal of Sustainable Construction Materials and Technologies

The rapid growth of urban infrastructure demands innovative materials that not only support structural performance but also contribute to sustainability through energy harvesting. Piezoelectric concrete, which integrates ceramics, polymers, nanomaterials, and bio-based fillers into cementitious matrices, has emerged as a promising solution. This review systematically explores the fundamentals of piezoelectricity in concrete, highlighting how stress-induced electromechanical coupling enables both energy harvesting and structural health monitoring. The paper critically evaluates major material systems including PZT ceramics, PVDF polymers, hybrid nanocomposites, and emerging bio-based materials, alongside their integration strategies such as embedded and surface-mounted approaches. Applications across pavements, bridges, and smart buildings …

Scientific Characterization Of Historic Mortars Dating From The 15th-Century Of A Historical Building In Algeria: A Case Study, M. E. Belgacem, N. Rabahi-Touloum, R. Neves, Y. Ouldkhaoua

Journal of Sustainable Construction Materials and Technologies

This research investigates the historic mortars (Aggregate/Binder (A/B) ratio) of a historical patrimony building, dating from the 15th century, in Algeria, for restoration purposes. It is well known that thorough characterization is essential for successful restoration. To this end, several techniques, including Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), and X-ray Fluorescence (XRF), optical microscope were used to characterize the historic mortars. A mechanical test was used to characterize the compressive strength of a historic mortar. For a comprehensive characterization, A/B ratios were estimated using both Digital Image Analyses (DIA) and chemical analyses. The results obtained provided clear information on …

Exploring The World Of Medical Exoskeleton Robots: A Classification Guide, Javlonbek Rakhmatillaev, Vytautas Bučinskas

Technical science and innovation

This article describes the classification of exoskeletons. This classification is based on the use of exoskeletons in the medical field, shape, power source, generation, parts related to the human body, structural material, and control forms based on sensor and actuator devices. In addition, examples of each category are given. The main goal is to comprehensively evaluate medical exoskeletons, pay special attention to their functions and goals, conduct scientific research, and further develop these devices. As a result, a completely new type of classification of medical exoskeletons was developed. The developed new type of classification serves as an important guide in …

Enhancing 6g Network Security With Quantum Key Distribution: A Comprehensive Review, Bassma M. Kamil

Al-Esraa University College Journal for Engineering Sciences

With the considerable progress of sixth-generation (6G) networks further on the horizon, security has attracted much attention in the face of increasingly sophisticated threats, especially from quantum computing. Classical cryptographic schemes based on computational hardness are becoming more and more brittle, as they can easily be attacked with a quantum computer. Quantum Key Distribution (QKD) arises as a promising tool for information-theoretic security through quantum mechanics to obtain an unbreakable key by exchanging unknown bit sequences. In this paper, we provide an extensive survey on the integration of QKD both in the envisioned 6G architecture, including current implementations, technical feasibility, …

Protection The Nfv Net-Work Using The Random Forest Classification, Mustafa H. Taha, Ibtesam Jomaa Hawi, Wafaa Waheeb Abdullah Ali

Al-Esraa University College Journal for Engineering Sciences

A misuse attack is the most common and dangerous type of attack that could target NFV (Network Function Virtualization). In a misuse attack, the attacker attempts to consume the NVF environment’s resources by sending a large amount of traffic. To protect the NFV environment, an early and accurate misuse attack detection system has been proposed based on NFV and Random Forest Classifier. The proposed model starts with importing the dataset and analyzing it then pre-processing and feature selection using a PSO (particle swarm optimization) Test algorithm, classification is based on the most common and efficient machine learning technique, which is …

Design Of A Hybrid System For Powering Wireless Communication Units, Samer Rabih, Ahed Alboody

Al-Esraa University College Journal for Engineering Sciences

Wireless and optical communication units are becoming more widespread nowadays, especially in rural areas. Therefore, feeding electricity has become essential for the continuity of services. As a result of economic and social development, there has been an urgent need to supply electrical power for the basic requirements of wired and wireless telecommunications equipment. This is linked to public safety, long life, and connection to uninterruptible power systems to ensure continuous power supply, whether from renewable energy sources or traditional diesel systems. This research studies and designs a renewable energy (solar) power system to power telecommunications equipment. The proposed power system …

Dynamic Ris-Enabled Massive Mimo Noma Systems Power Allocation Optimization For 6g Using Machin Learning Approach, Mohamed Hassan, Khalid Hamid, Salah Hagahmoodi, Elmuntaser Hassan

Al-Esraa University College Journal for Engineering Sciences

This study examines spectral efficiency (SE) and throughput throughout a spectrum of user densities (from 50 to 1000 users), user mobility speeds (0 to 350 km/h), latency, packet loss, and fairness index, within a wide range of signal-to-noise ratios (SNRs). The analysis includes a number of different situations, such as (i) cooperative non-orthogonal multiple access (NOMA) with massive multiple-input multiple-output (mMIMO), (ii) mMIMO cooperative NOMA integrated with cognitive radio (CR), and (iii) CR-assisted mMIMO cooperative NOMA enhanced with reconfigurable intelligent surfaces (RIS). All of these are part of 6G millimeter-wave (mmWave) networks. The study investigates the enhancement of latency, packet …

Harnessing Waste Heat From Solar Cells Using Advanced Energy Storage Systems, Hayder Ibrahim Ismael

Al-Esraa University College Journal for Engineering Sciences

Renewable energy is largely produced by photovoltaic (PV) solar cells, but such a process is greatly impacted with thermal buildup as the solar cells work. Redundant heat not only lowers the level of electrical production, but also hastens deterioration and decreases the life-time of PV modules. In this study, we suggest a hybrid system which combines high-performance energy storage devices, namely, super-capacitors, and PV modules coupled with the use of waste heat as a source of useful energy and which increases efficiency of the system in conjunction. In order to estimate the potential amount of thermal energy recovery, as well …

Empirical Research Of A Greenhouse Monitoring And Controlling System Using Zigbee Protocol, Mohammed Hijazeh, Salah Hagahmoodi

Al-Esraa University College Journal for Engineering Sciences

Greenhouses are of great importance in the agricultural field as they provide the appropriate and important environment for the growth and production of various plants regardless of the surrounding environmental conditions. Monitoring and controlling these houses are considered necessary and important in order to provide the required environment and obtain the best production. Therefore, the aim of this project is to study the monitoring and control of these houses using wireless sensor networks, which are considered modern and simple methods due to the accuracy of work and little effort they provide, and thus better production. The study will be for …

Designing An Efficient Deduplication Algorithm For Audio Files In Cloud Storage, Ammar Zakzouk, Alaa Al Sebae, Hasan Hasan

Al-Esraa University College Journal for Engineering Sciences

Data duplication is a significant challenge in large-scale data storage systems, as it consumes storage space and impacts data organization, management, and processing. An optimal storage system effectively utilizes available storage space. To solve this problem, hash algorithms are employed to generate hash keys for files. Matching files have the same hash key. However, the hash key for two different files in the data may match, and this is what we refer to as a collision. The collision issue is related to the length of the hash key. As the length of the hash key increases, the probability of a …

The Future Of Al-Driven Cybersecurity For Advanced Iot, Estqlal Hammad Dhahi, Sanaa Hammad Dhahi, Ohood Fadil Alwan

Al-Esraa University College Journal for Engineering Sciences

Internet of Things technologies experience rapid advancement because of 5G networks and upcoming 6G technologies, which resulted in transformational changes to security dynamics. This study examines the functionality of artificial intelligence through platforms developed to secure Internet of Things systems. The demand for improved security capabilities has become essential because IoT devices generate new assault channels, and their market penetration speed is escalating. Machine learning algorithms, together with deep learning and natural language processing methods, are investigated in this paper for enhancing the security protocols of IoT systems through studies found in academic literature. The paper explores upcoming developments and …

Foundations Of Artificial Intelligence In Healthcare Diagnostics: A Systematic Survey, Raghad Tariq Al-Hassani

Al-Esraa University College Journal for Engineering Sciences

Artificial Intelligence (AI) is becoming the cornerstone of the future of healthcare diagnostics, that has to ability to change the healthcare diagnostic landscape in terms of diagnostic accuracy, speed, and availability. This systematic review investigates the basic methods, tools, applications, and challenges involved in the integration of AI in diagnostic medicine. It emphasizes the using of machine learning models, deep learning networks (e.g., CNNs), NLP for clinical documentation, and smart computing infrastructures, such as edge device and IoMT. They are making possible real-time, data-driven decision making that is already at human-expert-level performance or, in some cases, even better (in the …

Secure Gif Files Based On Zuc Stream Cipher And Present Algorithm, Suhad Fakhri Hussein

Al-Esraa University College Journal for Engineering Sciences

Some important security needs include authentication, confidentiality, integrity, non-repudiation, and user privacy. Many security systems include these required protections for information transmission. The encryption process is one of the most important security measures. Many secure encryption algorithms are based on different keys and key lengths to ensure a high degree of security. GIF file format is common file format that is used in several application, securing these files through transmission is imperative. In this paper, an efficient method for encryption GIF file is proposed based on using modified present algorithm, modified ZUC stream cipher, and an efficient method for key …

Advanced Strategies And Solutions Towards More Secure And Effective Two-Factor Authentication In Networking, Zahraa Sameer Jawad

Al-Esraa University College Journal for Engineering Sciences

With the rapid increase in cybersecurity threats targeting network systems, traditional two-factor authentication (2FA) methods are insufficient to address advanced attacks. Vulnerabilities such as phishing, SIM-swapping, and social engineering exploit the limitations of SMS-based and email-based 2FA. This paper examines advanced strategies and solutions for securing networked environments through robust 2FA mechanisms, focusing on approaches like elliptic curve cryptography (ECC), digital certificates, and biometric verification. This article offers a comparative review of various strategies about their effectiveness in enhancing security, while also highlighting their capacity to optimize user-friendliness and adaptability to emerging threats. Research findings promote an effective countermeasure strategy …