Navigation, Guidance, Control and Dynamics Commons^™

The Impacts Of Advanced Avionics On Degraded Visual Environments, Sultan Naseeb Harib Fairouz Mubarak, Anju Anna Jacob Dr

International Journal of Aviation, Aeronautics, and Aerospace

Degraded visual environments (DVE) such as brownout, sand storms, and night conditions are responsible for accidents and hence losses in the aviation industry. There is a need to develop avionic systems to support pilots when they encounter environmental conditions that compromise their visual capacity. This report discusses the effects of DVEs on aviation, expounds on the advanced avionic systems available and further elaborates how these systems are implemented in countering DVE conditions. The report recommends on how advanced avionics systems have been and are being implemented in aircrafts to support decisions made by pilots flying under degraded visual environments.

Accuracy Assessment Of The Ebee Using Rtk And Ppk Corrections Methods As A Function Of Distance To A Gnss Base Station, Joseph Cerreta, David Thirtyacre, Peter Miller, Scott S. Burgess, William J. Austin

International Journal of Aviation, Aeronautics, and Aerospace

The use of unmanned aircraft systems to collect data for photogrammetry models has grown significantly in recent years. The accuracy of a photogrammetric model can depend on image georeferencing. The distance from a reference base station can affect the accuracy of the results. Positioning corrections data relies on precise timing measurements of satellite signals. The signals travel through the Earth's atmosphere, which introduces errors due to ionospheric and tropospheric delays. The aim of this research was to examine the eBee X and its global GNSS accuracy by comparing the RTK and PPK methods at different base station distances in photogrammetry …

Enhancing Trajectory-Based Operations For Uavs Through Hexagonal Grid Indexing: A Step Towards 4d Integration Of Utm And Atm, Deepudev Sahadevan Neelakandan, Hannah Al Ali

International Journal of Aviation, Aeronautics, and Aerospace

Aviation is expected to face a surge in the number of manned aircraft and drones in the coming years, making it necessary to integrate Unmanned Aircraft System Traffic Management (UTM) into Air Traffic Management (ATM) to ensure safe and efficient operations. This research proposes a novel hexagonal grid-based 4D trajectory representation framework for unmanned aerial vehicle (UAV) traffic management that overcomes the limitations of existing square/cubic trajectory representation methods. The proposed model employs a hierarchical indexing structure using hexagonal cells, enabling efficient ground based strategic conflict detection and conflict free 4D trajectory planning. Additionally, the use of Hexagonal Discrete Global …

Solar Sailing Adaptive Control Using Integral Concurrent Learning For Solar Flux Estimation, Luis Enrique Mendoza Zambrano, Riccardo Bevilacqua

Student Works

In the interest of exploiting natural forces for propellant-less spacecraft missions, this investigation proposes an adaptive control strategy to account for unknown parameters in the dynamic modeling of a reflectivity-controlled solar sail spacecraft. A Lyapunov-based control law along with integral concurrent learning is suggested to accomplish and prove global exponential tracking of the estimated parameters and states of interest, without satisfying the common persistence of excitation condition, which in most nonlinear systems cannot be guaranteed a priori. This involves estimating the solar flux or irradiance from the Sun to account for uncertainty and variation over time in this value. To …

Dual Quaternion Relative Dynamics For Gravity Recovery Missions, Ryan Kinzie, Riccardo Bevilacqua, Seo Dongeun

Student Works

A dual quaternion modeling approach is compared to traditional modeling methods for formation flying spacecraft utilized for gravity recovery missions. A modeling method that has traditionally been used for gravity recovery missions is presented which models the motion of two formation flying spacecraft and a test mass. This is followed by the dual quaternion-based formulation for the equations of motion of the twelve degree-of-freedom coupled relative dynamics of formation flying spacecraft and a test mass. Lastly, utilizing data products from the Gravity Recovery and Climate Experiment Follow-On mission, a comparison of these two modeling methods is presented which proves the …

Design Of An Internal Osculating Waverider Intake, Mark E. Noftz, Andrew J. Shuck, Joseph S. Jewell, Jonathan Poggie, Andrew N. Bustard, Thomas J. Juliano, Nicholas J. Bisek

Publications

The design of an inward-turning, high-speed, three-dimensional streamline traced intake is presented from osculating axisymmetric theory. To satisfy the osculating intake design criteria, a stitched Busemann diffuser and Internal Conical Flow-A solution is used as the basic isentropic compressive streamline. This new contour provides efficient compression, high flow uniformity, and straight leading edge shocks of equal strength. Additionally, a novel method for constructing the inlet cowl is presented. The combined process leads to a new method of high-speed intake design. A generic shape-transitioned intake is constructed and named the Indiana Inlet for the Indiana universities that contributed to the project. …

Health Management And Adaptive Control Of Distributed Spacecraft Systems, Tatiana Alejandra Gutierrez Martinez

Doctoral Dissertations and Master's Theses

As the development of challenging missions like on-orbit construction and collaborative inspection that involve multi-spacecraft systems increases, the requirements needed to improve post-failure safety to maintain the mission performance also increases, especially when operating under uncertain conditions. In particular, space missions that involve Distributed Spacecraft Systems (e.g, inspection, repairing, assembling, or deployment of space assets) are susceptible to failures and threats that are detrimental to the overall mission performance. This research applies a distributed Health Management System that uses a bio-inspired mechanism based on the Artificial Immune System coupled with a Support Vector Machine to obtain an optimized health monitoring …

On-Board Artificial Intelligence For Failure Detection And Safe Trajectory Generation, Eduardo Morillo

Doctoral Dissertations and Master's Theses

The use of autonomous flight vehicles has recently increased due to their versatility and capability of carrying out different type of missions in a wide range of flight conditions. Adequate commanded trajectory generation and modification, as well as high-performance trajectory tracking control laws have been an essential focus of researchers given that integration into the National Air Space (NAS) is becoming a primary need. However, the operational safety of these systems can be easily affected if abnormal flight conditions are present, thereby compromising the nominal bounds of design of the system's flight envelop and trajectory following. This thesis focuses on …

Development And Deployment Of A Dynamic Soaring Capable Uav Using Reinforcement Learning, Jacob Adamski

Doctoral Dissertations and Master's Theses

Dynamic soaring (DS) is a bio-inspired flight maneuver in which energy can be gained by flying through regions of vertical wind gradient such as the wind shear layer. With reinforcement learning (RL), a fixed wing unmanned aerial vehicle (UAV) can be trained to perform DS maneuvers optimally for a variety of wind shear conditions. To accomplish this task, a 6-degreesof- freedom (6DoF) flight simulation environment in MATLAB and Simulink has been developed which is based upon an off-the-shelf unmanned aerobatic glider. A combination of high-fidelity Reynolds-Averaged Navier-Stokes (RANS) computational fluid dynamics (CFD) in ANSYS Fluent and low-fidelity vortex lattice (VLM) …

Spacecraft Systems & Navigation, Christopher Vanacore

Student Works

This textbook is steered towards higher educational course entailed in Commercial Space Operations. This textbook will be covering in detail Orbital Satellites, and Spacecraft. These topics are discussed according to their application, design, and environment. The power system, shielding and communication systems are reviewed along with their missions, space, environment and limitations. Any vehicle, whether manned or unmanned, intended for space travel is a spacecraft. A spacecraft's required systems and equipment depend on the information it will acquire and the tasks it will perform. Although their levels of sophistication vary widely, they re all subject to the harsh conditions of …

Optimization Of Rover Wheel Geometries For Planetary Missions, Nikita Amberkar

Doctoral Dissertations and Master's Theses

Rovers have been launched into space for exploration of the Moon and Mars to collect samples of rock and soil. To continue the explorations, the rovers need to have reliable wheels to drive around. However, due to the soil being soft, the wheels on the rover start to lose traction and the wheels sink while driving to various locations. Previous work in this field has been done experimentally or with the use of simulations. Only a few references report the effect of uncertainties in grouser simulation on the traction efficiency. The objective of this work was to (a) Understand the …

Vertically Air Lifted High Altitude Light Launch Apparatus (Valhalla), Benjamin E. Chaback, Ethan L. Deweese, Avery Evans, Alyssa Hodum

Beyond: Undergraduate Research Journal

Project VALHALLA aims to get collegiate level rockets to reach higher altitudes by providing a launch platform that shall allow them to be launched from 100,000 ft. This shall allow researchers to pass ninety percent of Earth's dense atmosphere when launching their rockets and shall allow for research at altitude. VALHALLA’s design consists of using multiple high-altitude balloons arranged around a launch platform to reach the target altitude with the rocket. The project shall consist of the following subsystems: policy, structure and design, helium recovery system, and electronics. The policy team shall be responsible for ensuring that this platform conforms …

Vertical Take-Off And Landing Control Via Dual-Quaternions And Sliding Mode, Joshua Sonderegger

Doctoral Dissertations and Master's Theses

The landing and reusability of space vehicles is one of the driving forces into renewed interest in space utilization. For missions to planetary surfaces, this soft landing has been most commonly accomplished with parachutes. However, in spite of their simplicity, they are susceptible to parachute drift. This parachute drift makes it very difficult to predict where the vehicle will land, especially in a dense and windy atmosphere such as Earth. Instead, recent focus has been put into developing a powered landing through gimbaled thrust. This gimbaled thrust output is dependent on robust path planning and controls algorithms. Being able to …

Online Pilot Model Parameter Estimation For Loss-Of-Control Prevention In Aircraft Systems, Frederick Schill

Doctoral Dissertations and Master's Theses

A pilot is a highly nonlinear and incredibly complex controller whose responses are difficult to predict. Many accidents have occurred from pilot error before or after failures and almost always after entering areas of the flight envelope considered as Loss-of-Control regimes. If a pilot's inputs to the flight control system can be predicted, then the introduction of dangerous flight conditions can be readily avoided. Avoidance could take the form of a warning indicator or augmentation of the pilot's inputs. The primary difficulty lies in how to actually predict how the pilot will perform in the future.

Methods to solve this …

Dynamic Analysis Of Cubesat Impact On Lunar Surface, Dalton C. Korczyk

Doctoral Dissertations and Master's Theses

EagleCam is a pico-satellite (CubeSat) with dimensions of 100 x 100 x 150 mm3 that is going to the moon as a payload of the Intuitive Machines Nova-C lunar lander. The CubeSat’s purpose is to record the lunar landing from a 3rd person view. Unlike other CubeSats, EagleCam is designed to impact the lunar surface and there is no history to build off of. Specifically, EagleCam will need to survive a 30 m drop onto the lunar surface with all internal components fully operational post impact. This thesis is focused on the analytical, numerical, and experimental methods for determining the …

Controller Design For A Swirl Injection Hybrid Launch Vehicle, Ryan Kinzie

Doctoral Dissertations and Master's Theses

This research is focused on the design of controllers for stabilizing a launch vehicle with an internally originating torque. The motivation for this research arises from the new development of rocket engines which swirl combustion gases to gain combustion stability benefits, and in the case of hybrid rocket engines, fuel regression benefits as well. The stability of the launch vehicle dynamics due to the internal torque has not been discussed before. To the author’s knowledge, this is the first research to address the stabilization problem of the launch vehicle with internal torque. Due to the new design/characteristics of these engines, …

Stochastic Model Predictive Control Via Fixed Structure Policies, Elias Wilson

Doctoral Dissertations and Master's Theses

In this work, the model predictive control problem is extended to include not only open-loop control sequences but also state-feedback control laws by directly optimizing parameters of a control policy. Additionally, continuous cost functions are developed to allow training of the control policy in making discrete decisions, which is typically done with model-free learning algorithms. This general control policy encompasses a wide class of functions and allows the optimization to occur both online and offline while adding robustness to unmodelled dynamics and outside disturbances. General formulations regarding nonlinear discrete-time dynamics and abstract cost functions are formed for both deterministic and …

Evaluation Of Onboard Detect-And-Avoid System For Suas Bvlos Operations, Jon M. Loffi, Samuel M. Vance, Jamey Jacob, Luke Spaulding, Jared C. Dunlap

International Journal of Aviation, Aeronautics, and Aerospace

No abstract provided.

The Bobo Project: Hexa-Eagles, Anjana Mahesh Kumar, Huna Amad, Jean Samirah Venturina, Sakthivel Mithra, Suhasini, Sumaiyathul Faaliha

Student Works

The consumer business has undergone a substantial shift in how customers to shop since the introduction of online shopping. When the world was affected by Covid-19 in 2020, one of the most major repercussions was in the Food & Beverage (F&B) and grocery industries. As a result of the pandemic, many cities were put under lockdown, and everyone remained indoors. Consumer purchasing patterns changed dramatically, with malls closing or operating with limited access, and customers avoiding common spaces for fear of getting the virus. As the global epidemic progressed, several firms were forced to close their physical locations due to …

Trajectory Generation For A Multibody Robotic System: Modern Methods Based On Product Of Exponentials, Aryslan Malik

Doctoral Dissertations and Master's Theses

This work presents several trajectory generation algorithms for multibody robotic systems based on the Product of Exponentials (PoE) formulation, also known as screw theory. A PoE formulation is first developed to model the kinematics and dynamics of a multibody robotic manipulator (Sawyer Robot) with 7 revolute joints and an end-effector.

In the first method, an Inverse Kinematics (IK) algorithm based on the Newton-Raphson iterative method is applied to generate constrained joint-space trajectories corresponding to straight-line and curvilinear motions of the end effector in Cartesian space with finite jerk. The second approach describes Constant Screw Axis (CSA) trajectories which are generated …

Optimal Sizing And Control Of Hybrid Rocket Vehicles, Srija Ryakam

Doctoral Dissertations and Master's Theses

In the present work, a genetic algorithm is used to optimize a hybrid rocket engine in order to minimize the propellant required for a specific mission. In a hybrid rocket engine, the mass flow rate of the oxidizer can be throttled to enhance the performance of the rocket. First, an analysis of the internal ballistics and the ascent trajectory has been carried out for different mass flow rates of the oxidizer as a function of time, for a fixed amount of oxidizer, in order to study the effect of throttling. Two equivalent problems are considered: in the first problem the …

Rf Fingerprinting Unmanned Aerial Vehicles, Norah Ondus

Doctoral Dissertations and Master's Theses

As unmanned aerial vehicles (UAVs) continue to become more readily available, their use in civil, military, and commercial applications is growing significantly. From aerial surveillance to search-and-rescue to package delivery the use cases of UAVs are accelerating. This accelerating popularity gives rise to numerous attack possibilities for example impersonation attacks in drone-based delivery, in a UAV swarm, etc. In order to ensure drone security, in this project we propose an authentication system based on RF fingerprinting. Specifically, we extract and use the device-specific hardware impairments embedded in the transmitted RF signal to separate the identity of each UAV. To achieve …

Robust Nonlinear Tracking Control For Unmanned Aircraft In The Presence Of Wake Vortex, Petr Kazarin, Vladimir Golubev, William Mackunis, Claudia Moreno

Publications

The flight trajectory of unmanned aerial vehicles (UAVs) can be significantly affected by external disturbances such as turbulence, upstream wake vortices, or wind gusts. These effects present challenges for UAV flight safety. Hence, addressing these challenges is of critical importance for the integration of unmanned aerial systems (UAS) into the National Airspace System (NAS), especially in terminal zones. This work presents a robust nonlinear control method that has been designed to achieve roll/yaw regulation in the presence of unmodeled external disturbances and system nonlinearities. The data from NASA-conducted airport experimental measurements as well as high-fidelity Large Eddy Simulations of the …

Envelope Analysis Of Speed-Controlled Evtol Urban Air Mobility Vehicles, David J. Thompson

Doctoral Dissertations and Master's Theses

There are many vehicles being developed which rely on electrically driven propellers/rotors for both control and propulsion. Based on these vehicles, it is hypothesized that there exists a size limit for speed-controlled propellers/rotors in terms of propeller/rotor diameter. To investigate this, a scaling method was created to allow for a vehicle to be created without being based on a specific mission or passenger/cargo requirement. Relationships were developed to size both the physical vehicle and the weight of the vehicle based on the propeller/rotor diameter. A simulation of a quadcopter was created for the vehicle and scaled with both propeller/rotor diameter …

Design And Flight-Path Simulation Of A Dynamic-Soaring Uav, Gladston Joseph

Doctoral Dissertations and Master's Theses

We address the development of a dynamic-soaring capable unmanned aerial vehicle (UAV) optimized for long-duration flight with no on-board power consumption. The UAV’s aerodynamic properties are captured with the integration of variable fidelity aerodynamic analyses. In addition to this, a 6 degree-of-freedom flight simulation environment is designed to include the effects of atmospheric wind conditions. A simple flight control system aids in the development of the dynamic soaring maneuver. A modular design paradigm is adopted for the aircraft dynamics model, which makes it conducive to use the same environment to simulate other aircraft models. Multiple wind-shear models are synthesized to …

Modeling Of A Hybrid-Electric System And Design Of Control Laws For Hybrid-Electric Urban Air Mobility Power Plants, Sohail Bin Salam Lahaji

Doctoral Dissertations and Master's Theses

Advanced Air Mobility (AAM) is an emerging market and technology in the aerospace industry. These systems are being developed to overcome traffic congestion. The current designs make use of Distributed Electric Propulsion (DEP): either fully electric or hybrid electric. The hybrid engine system consists of two power sources: prime movers, such as turbine engines, and batteries. The hybrid systems offer higher range and endurance compared with the existing fully electric systems. Hybrid-electric power generation systems for AAM have different mission requirements when compared to systems used in automobiles. Therefore, there is a particular need to model hybrid-electric systems and the …

Air Navigation And Covid-19: Atm Efficiency In Pandemic Crisis, Fabio Lourenco Carneiro Barbosa

Graduate Student Works

The coronavirus crisis effects on aviation in 2020 are currently well-documented. Nonetheless, the widely registered low traffic due to the crisis does not necessarily lead to increased air navigation efficiency. Thus, the present work, developed to fulfill the program outcomes for the Master of Science in Aeronautics, Air Traffic Management (ATM) specialization, aimed to investigate what was the impact of the COVID-19 crisis on air navigation efficiency in Brazil. This research question was addressed through a quantitative, nonexperimental, observational approach with two parallel branches, designed to answer two sub-questions. For the first, regarding what was the impact of the crisis …

Adaptive And Neural Network-Based Aircraft Tracking Control With Synthetic Jet Actuators, Joshua Teramae

Doctoral Dissertations and Master's Theses

Wing-embedded synthetic jet actuators (SJA) can be used to achieve maneuvering control in aircraft by delivering controllable airflow perturbations near the wing surface. Trajectory tracking control design for aircraft equipped with SJA is particularly challenging, since the controlling actuator itself has an uncertain dynamic model. These challenges necessitate advanced nonlinear control design methods to achieve desirable performance for SJA-based aircraft (e.g., micro air vehicles (MAVs)). In this research, adaptive and neural-network based control methods are investigated, which are specifically designed to compensate for the SJA dynamic model uncertainty and unpredictable operating conditions characters tic of real-world MAV applications. The control …

Adaptive Augmentation Of Non-Minimum Phase Flexible Aerospace Systems, Michael A. Dupuis

Doctoral Dissertations and Master's Theses

This work demonstrates the efficacy of direct adaptive augmentation on a robotic flexible system as an analogue of a large flexible aerospace structure such as a launch vehicle or aircraft. To that end, a robot was constructed as a control system testbed. This robot, named “Penny,” contains the command and data acquisition capabilities necessary to influence and record system state data, including the flex states of its flexible structures. This robot was tested in two configurations, one with a vertically cantilevered flexible beam, and one with a flexible inverted pendulum (a flexible cart-pole system). The physical system was then characterized …

A Mathematical Analysis Of The Wind Triangle Problem And An Inquiry Of True Airspeed Calculations In Supersonic Flight, Leonard T. Huang, Lisa I. Cummings

International Journal of Aviation, Aeronautics, and Aerospace

In the first half of this paper, we present a fresh perspective toward the Wind Triangle Problem in aerial navigation by deriving necessary and sufficient conditions, which we call "go/no-go conditions", for the existence/non-existence of a solution of the problem. Although our derivation is based on simple trigonometry and basic properties of quadratic functions, it is mathematically rigorous. We also offer examples to demonstrate how easy it is to check these conditions graphically. In the second half of this paper, we use function theory to re-examine another problem in aerial navigation, namely, that of computing true airspeed — even in …