Aeronautical Vehicles Commons^™

Modeling And Test Of The Efficiency Of Electronic Speed Controllers For Brushless Dc Motors, Clayton R. Green

Master's Theses

Small electric uninhabited aerial vehicles (UAV) represent a rapidly expanding market requiring optimization in both efficiency and weight; efficiency is critical during cruise or loiter where the vehicle operates at part power for up to 99% of the mission time. Of the four components (battery, motor, propeller, and electronic speed controller (ESC)) of the electric propulsion system used in small UAVs, the ESC has no accepted performance model and almost no published performance data. To collect performance data, instrumentation was developed to measure electrical power in and out of the ESC using the two wattmeter method and current sense resistors; …

Designing A Remote Aerial System To Image And Analyze The Health Of Grape Crops At Cal Poly San Luis Obispo, Alexander D. Vice, Dylan Benton, Adipratnia Asmady, Andrew Mercier, Andrew Meyer, Eric Belfield, Aaron Drake

STAR Program Research Presentations

In the last decade the prevalence of unmanned aerial vehicles (UAVs) has exploded; however, the presence of UAVs in research situations is still a relatively new and untested field. The autonomous flight lab (AFL) at Cal Poly San Luis Obispo is a new lab site that is dedicated to using UAVs to benefit research for all backgrounds. Before AFL was able to fly missions we first needed to actually receive our vehicles, create a lab space that would provide all of the necessary resources and equipment necessary to fly, and to be granted permission by the Federal Aviation Administration (FAA) …

How To Save The World: One Life (And Uav) At A Time!, Natalie A. Wright

STAR Program Research Presentations

The proliferation of Uninhabited Aerial Vehicles (UAV’s) in commercial and public service aviation arenas has begun to gain the attention of many citizens. Popularized vehicles such as quadcopters have applications in aerial photography, small package delivery and hobbyist/consumer interests. Use of small-scale, fixed- and rotary-wing, remotely operated systems has been popularized as a result of such vehicles’ size and operational simplicity, which widens the range of application of this technology. Public service applications have the potential to advance emergency services management, which can substantially contribute to the public wellbeing. This research will examine the utility of multi-rotor systems in the …

Inlet Shape Considerations For Split-Wing Electric Distributed Propulsion, Kurt Vonderhaar Papathakis

Master's Theses

This thesis aims to uncover preliminary design relationships for an inlet of a split-wing electric distributed propulsion regional airliner. Several aspects of the inlet design were investigated, including: the overall thickness of the airfoil section with respect to the chord, inlet throat area, and lip radius. These parameters were investigated using several angles of attack and mass flow rates through the fan. Computational fluid dynamics, with a 2^nd Order turbulence model was used and validated against World War II era data from NACA, as those studies were the most pertinent wind tunnel data available. Additionally, other works by Boeing, …

Electric Commuter Multicopter, Marley Hunter Miller, Blake Sperry, Ike Sheppard, Olliver Fredrick Kunz, Sam Juday, Alex O'Hearn, Kyle Seth Kruse, Arthur Norwood, Jarrell Washington

Mechanical Engineering

This document describes the design, analysis, and overall goals of the Electric Commuter Multicopter (ECM) Senior Project. It was presented by Bob Addis and Bill Burner to the senior mechanical engineering class of 2015 at Cal Poly, San Luis Obispo. The progress and development of the project are described in detail and to an extent that an individual or group with similar aspirations can construct their own multicopter or expand upon this one. The goal of this project is to create an Ultralight, as defined by FAA Part 103, commuter multicopter vehicle capable of transporting an individual to and from …

Design Methods For Remotely Powered Unmanned Aerial Vehicles, William Beaman Howe

Master's Theses

A method for sizing remotely powered unmanned aerial vehicles is presented to augment the conventional design process. This method allows for unconventionally powered aircraft to become options in trade studies during the initial design phase. A design matrix is created that shows where, and if, a remotely powered vehicle fits within the design space. For given range and power requirements, the design matrix uses historical data to determine whether an internal combustion or electrical system would be most appropriate. Trends in the historical data show that the break in the design space between the two systems is around 30 miles …

Foss Big Data Storage Solution, Gary L. Jaffe

STAR Program Research Presentations

Utilizing the AERO Institute as an IT test bed or “sandbox”, a small-agile development team will design, build, and test a data management storage system to support post processing of archived and in-flight data collected with the Piccolo flight control system and Compact Fiber Optic Sensing System (C-FOSS). Both systems are integrated on the APV3 aircraft, a small remote-operated vehicle. Due to the amount of data collected from C-FOSS, a system will be designed to sort and organize large data sets. An open-source database will be explored as a viable solution to manage large data loads and provide multi-cluster system …

Effect Of Adaptive Tabs On Drag Of A Square-Base Bluff Body, Brian W. Barker

Master's Theses

This thesis involves the experimental wind tunnel testing of a 0.127m by 0.127m square-base bluff body to test the effectiveness of trailing edge tabulations to reduce drag in the Cal Poly 0.912m by 1.219 m low-speed wind tunnel. To accomplish this, the boundary layer was first measured on the trailing edge of the model for the three speeds at 10, 20, and 30 m/s, with Re = 8.3e4, 1.6e5 and 2.5e5 respectively, without the tabs. Three different tests were performed to determine the effectiveness of the tabs. These tests included base pressure measurements, total drag force measurements and hotwire velocity …

Flight Testing Small Uavs For Aerodynamic Parameter Estimation, Adam Thomas Chase

Master's Theses

A flight data acquisition system was developed to aid unmanned vehicle designers in verifying the vehicle's design performance. The system is reconfigurable and allows the designer to choose the correct combination of complexity, risk, and cost for a given flight test. The designer can also reconfigure the system to meet packaging and integration requirements. System functionality, repeatbility, and accuracy was validated by collecting data during multiple flights of a radio-controlled aircraft. Future work includes sensor fusion, thrust prediction methods, stability and control derivative estimation, and growing Cal Poly's small-scale component aerodynamic database.

Lightweight Uav Launcher, Ben Miller, Christian Valoria, Corinne Warnock, Jake Coutlee

Mechanical Engineering

This report discusses the design, construction, and testing of a lightweight, portable UAV launcher. There is a current need for a small team of soldiers to launch a US Marine Tier II UAV in a remote location without transport. Research was conducted into existing UAV launcher designs and the pros and cons of each were recorded. This research served as a basis for concept generation during the initial design development stage. It was required that the design weigh less than 110 lbs, occupy a smaller volume than 48" x 24" 18" in its collapsed state, be portable by a single …

Adaptive Control Techniques For Transition-To-Hover Flight Of Fixed-Wing Uavs, Brian Decimo Marchini

Master's Theses

Fixed-wing unmanned aerial vehicles (UAVs) with the ability to hover combine the speed and endurance of traditional fixed-wing fight with the stable hovering and vertical takeoff and landing (VTOL) capabilities of helicopters and quadrotors. This combination of abilities can provide strategic advantages for UAV operators, especially when operating in urban environments where the airspace may be crowded with obstacles. Traditionally, fixed-wing UAVs with hovering capabilities had to be custom designed for specific payloads and missions, often requiring custom autopilots and unconventional airframe configurations. With recent government spending cuts, UAV operators like the military and law enforcement agencies have been urging …

Control System Infrastructure For The Cal Poly Human Powered Helicopter: Upturn Ii, Douglas A. Thornber, Samuel J. Wahyou

Aerospace Engineering

The Upturn was donated to Cal Poly in October 2012 by Neal Saiki from NTS. Our project was to replicate the old system to decrease the turn-around time in case of a crash during a test flight. The control system for the Upturn II was designed with the same considerations that were used for the Upturn. The result we got was inconclusive for the sensor selection, the new control system is heavier than the old system, and we couldn’t validate the system without doing a flight test. For the next iteration if some of the replication requirements are relaxed the …

Ramjet Combustion Chamber, Paul Cameron Stone

Aerospace Engineering

A ramjet combustion chamber is designed and some initial assembly fabrication and test completed as a component of a ramjet graduate project for California Polytechnic State University, San Luis Obispo Supersonic Wind Tunnel. The combustor design is driven by a theoretical model created by a Cal Poly graduate student, Harrison Sykes. Temperature, pressure, and fuel flow will be measured.

Integrated Collision Avoidance System Sensor Evaluation Final Design Project, Alex F. Graebe, Bridgette S. Kimball, Drew T. Lavoise

Mechanical Engineering

Following the development of Aircraft Collision Avoidance Technology (ACAT) by the National Aeronautics and Space Administration (NASA), a need arose to transition the life-saving technology to aid the general aviation community. Considering the realistic cost of implementation, it was decided that the technology should be adapted to function on any smartphone, using that device as an end-to-end solution to sense, process, and alert the pilot to imminent threats. In September of 2012, the SAS (Sense and Survive) Senior Project Team at California Polytechnic University (Cal Poly), San Luis Obispo was assigned the task of using smartphone technology to accurately sense …

An Experimental Investigation Of The Stol Performance Of Cal Poly's Amelia In The Nfac, Jonathan Andrew Lichtwardt

Master's Theses

Results from Cal Poly's recent wind tunnel test, during the Winter of 2011-2012, in the 40- by 80-foot test section at the National Full-Scale Aerodynamics Complex (NFAC) at NASA Ames Research Center are presented. AMELIA, the Advanced Model for Extreme Lift and Improved Aeroacoustics, is the first full-span, cruise efficient, short take-off and landing (CESTOL) model incorporating leading- and trailing-edge blowing wing circulation control and over-the-wing mounted turbine propulsion simulators (TPS) to date. Testing of the 10 foot span model proved successful and was the result of a 5 year NASA Fundamental Aeronautics Program Research Announcement. The test generated extensive …

Enabling Rapid Conceptual Design Using Geometry-Based Multi-Fidelity Models In Vsp, Joel Brian Belben

Master's Theses

The purpose of this work is to help bridge the gap between aircraft conceptual design and analysis. Much work is needed, but distilling essential characteristics from a design and collecting them in an easily accessible format that is amenable to use by inexpensive analysis tools is a significant contribution to this goal. Toward that end, four types of reduced-fidelity or degenerate geometric representations have been defined and implemented in VSP, a parametric geometry modeler. The four types are degenerate surface, degenerate plate, degenerate stick, and degenerate point, corresponding to three-, two-, one-, and zero- dimensional representations of underlying geometry, respectively. …

Senior Project Report - Doctest, Stephen Weessies

Computer Engineering

DocTest is a program that, simply put, allows a programmer or user to document STANAG 4586 (a standard for unmanned aerial vehicle interoperability) messages and test the vehicle system at Lockheed Martin [5]. The program is extensible to allow for further development aiding our software team to do what they do best and not get bogged down in tedious but necessary documentation. DocTest is also used to aid in testing, keeping track of the issues and bugs found and creating a document that captures each issue so an issue is not missed or forgotten. This program was made for use …

Design And Performance Of Circulation Control Geometries, Rory Martin Golden

Master's Theses

With the pursuit of more advanced and environmentally-friendly technologies of today’s society, the airline industry has been pushed further to investigate solutions that will reduce airport noise and congestion, cut down on emissions, and improve the overall performance of aircraft. These items directly influence airport size (runway length), flight patterns in the community surrounding the airport, cruise speed, and many other aircraft design considerations which are setting the requirements for next generation aircraft. Leading the research in this movement is NASA, which has set specific goals for the next generation regional airliners and has categorized the designs that meet the …

Determination Of Human Powered Helicopter Stability Characteristics Using Multi-Body System Simulation Techniques, Sean M. Brown

Master's Theses

Multi-Body System Simulation combined with System Identification was developed as a method for determining the stability characteristics of a human powered helicopter(HPH) configurations. HPH stability remains a key component for meeting competition requirements, but has not been properly treated. Traditional helicopter dynamic analysis is not suited to the HPH due to its low rotation speeds and light weight. Multi-Body System Simulation is able to generate dynamic response data for any HPH configuration. System identification and linear stability theory are used to determine the stability characteristics from the dynamic response. This thesis focuses on the method development and doesn't present any …

Telescope Assembly Alignment Simulator Performance Optimization, Joshua G. Thompson, Brian Eney, Zaheer Ali, Bob Thompson

STAR Program Research Presentations

The Telescope Assembly Alignment Simulator (TAAS) calibrates scientific instruments (SI’s) that are installed on the Stratospheric Observatory For Infrared Astronomy (SOFIA). An SI’s accuracy is directly dependent on the consistent performance of the TAAS, which has never been fully characterized. After designing various thermal and optical experiments to identify the current unknowns of TAAS, we now have a far better grasp on how the equipment behaves.

Two-Stage, High-Altitude Rocket With Internal Skeleton Design Entered In Advance Category Of 7th Esra Irec, Samuel S. Bowman, Kevin J. Byrne, Allen Capatina, Aliki S. Loper-Leddy, Joshua A. Van Schoyck

Aerospace Engineering

A high-altitude, two-stage rocket was designed, built, and entered in the advanced category of the 7^th Annual Experimental Sounding Rocket Association (ESRA) Intercollegiate Rocketry Engineering Competition (IREC). The rocket, called AJAKS, featured an internal skeleton made of carbon fiber rods, and a combination of plywood, carbon, and aluminum bulkheads. Loads were driven through the internal structure, with an outer skin tube providing an aerodynamic surface. A unique separation device was developed to ensure proper stage separation. The competition required the rocket to carry a 10-lb payload, which was chosen by the team to consist of an IMU and data …

Instrument Panel Design, Martin Bialy, Amber Carney, Michael Roche

Aerospace Engineering

This project focused on the design and implementation of an Electronic Flight Instrument System for a home built experimental aircraft known as a CH-701. Older aircraft use manual gauges and dials based on varying internal instruments such as gyro’s and the like but many of these traditional instruments to a singular GUI displaying multiple instruments data at one time. These devices are aimed at helping the pilot stay more alert and aware when flying between automatic warnings when in dangerous flying conditions / configurations as well as simplifying the instrument panel to only display what is absolutely necessary. These programs …

Development Of A Pyrotechnic Shock Simulation Apparatus For Spacecraft Applications, Joseph Binder, Matthew Mccarty, Chris Rasmussen

Aerospace Engineering

This report details the research, design, construction, and testing of a pyrotechnic shock simulation apparatus for spacecraft applications. The apparatus was developed to be used in the Space Environments Lab at California Polytechnic State University. It will be used for testing spacecraft components with dimensions up to 24”x12”x12” as well as CubeSats. Additionally, it may be used as an instructional or demonstrational tool in the Aerospace Department’s space environments course. The apparatus functions by way of mechanical impact of an approximately 20 lb stainless steel swinging hammer. Tests were performed to verify the simulator’s functionality. Suggestions for improvement and further …

Development Of A Flight Test Program For A Homebuilt Zenith Stol Ch 701, Reed Danis, Dave Nguyen

Aerospace Engineering

The objective of this senior project is to prepare a phase I flight test program for a homebuilt Zenith CH 701 kit aircraft. The CH 701 is a small, short takeoff and landing experimental aircraft. A team including several Cal Poly students helped to construct the airframe and avionics of a 701 during the 2011-2012 academic year. The flight test program is necessary for obtaining unrestricted FAA flight certification for the completed aircraft. A set of test flight cards were created to aid in meeting the 25 to 40 hours of required phase I flight testing. These cards include specific …

Human Powered Helicopter: Rotor Structure, Joseph Ram, Juan Carlos Olvera

Mechanical Engineering

The following report encompasses the Human Powered Helicopter Rotor Team’s conceptual models and ideas based on research and modeling analysis. The following gives an overview of material researched, concept generation, analyzation, manufacturing, and testing for a rotor structure to be installed in a Human Powered Helicopter.

Nonlinear Uav Flight Control Using Command Filtered Backstepping, Brian M. Borra

Master's Theses

The aim of this effort is to implement a nonlinear flight control architecture, specifically flight path control via command filtered backstepping, for use in AME UAS's Fury® 1500 unmanned flying wing aircraft. Backstepping is a recursive, control-effort minimizing, constructive design procedure that interlaces the choice of a Lyapunov function with the design of feedback control. It allows the use of certain plant states to act as intermediate, virtual controls, for others breaking complex high order systems into a sequence of simpler lower-order design tasks.

Work herein is a simplified implementation based on publications by Farrell, Sharma, and Polycarpou. Online approximation …

3d Cfd On An Open Wheel Race Car Front Wing In Ground Effects, Thomas A. Price

Aerospace Engineering

The purpose of the report is to investigate the ability of the Fluent 6.3 k-ε Realizable turbulence model with standard wall functions to model the flow around the front wing of Cal Poly’s 2008 Formula SAE car. The three primary areas of interest are ground effects, the wing wheel interaction, and the wing tip vortices. Fluent was successful at modeling the increase suction from the ground effects, and the upwash due to the wing tip vortices. The results also displayed how the high pressure region in front of the tire propagates forward and interacts with the pressure distribution around the …

Determination Of The Surface Boundary Layer Using A Quadrotor, Andrew Haviland

Aerospace Engineering

Wind velocity data was taken by a quadrotor UAV using accelerometers, gyroscope, and a barometer. Data was taken at different altitudes over a single position to determine the boundary layer at the surface of the earth. The data taken was compared to the results from numerical methods to determine if this is a practice application for a quadrotor. A few weeks before the test was set to get underway, the quadrotor suffered a very hard crash while testing the GPS and altitude hold function and wasn’t able to completely recover from it. Theoretical results and experiment proposal are covered. 

Design, Manufacturing And Testing Of An Environmentally-Green Bipropellant Thruster, Alex Bendoyro, Gabriel Sanchez, Erin Stearns, Phillip Takahashi

Aerospace Engineering

This project reviews the design, manufacturing and experimentation process of a green bi-propellant thruster designed to output 5 lbf. The goals were to successfully design, manufacture and test a thruster, while discovering the complications that arise through out the complete design process of a green thruster. The thruster was successfully designed using ideal rocket equations and the design was successfully confirmed using CFD and FEA. Manufacturing of the thruster was fully planned and revealed mild flaws in thruster design. For example some features were not manufacturable to the exact measurements desired. Testing of the engine gave results inconsistent with expected …

Cal Poly Human Powered Helicopter, Josiah Auer, Eric Behne, Dave Berry, Rebecca Hennings, James Koch, Ian Marquardt, Josiah Mayfield, Sean Miller

Mechanical Engineering

The following report encompasses the Cal Poly Human Powered Helicopter team’s efforts during the 2010-2011 academic year. The intention of this project is to further the knowledge of human powered helicopter design and to validate an ideal configuration through experimental tests and analysis. 

A. Background

The Sikorsky Prize offered by the American Helicopter Society has been the catalyst for many attempts at Human Powered Helicopter (HPH) flight. The requirement to win the prize is a continuous, human powered flight of more than 60 seconds that stays within a 10 meter square box and reaches an altitude greater than 3 meters …