Aerodynamics and Fluid Mechanics Commons^™

Active Control Of Coherent Structures In An Axisymmetric Jet, Michael Marques Goncalves

Doctoral Dissertations and Master's Theses

The primary objective of this work is to develop high-fidelity simulation model for jet noise control predictions and quantify the sound reduction when an external source frequency mode excitation is imposed on the jet flow. Whereas passive approaches using mixing devices, such as chevrons, have been shown to reduce low-frequency noise in jet engines, such approaches incur a performance penalty since they result in a reduced thrust. To avoid a performance penalty in reducing jet noise, the current work investigates a open-loop active noise control (ANC) system that utilizes a unsteady microjet actuator on the nozzle lip in the downstream …

Extracting Microplastic From Anhydrous Beach Sediment Utilizing Relative Terminal Velocities, Grace Robertson, Jackson Schuler

Student Works

The primary intent of this research was to investigate and develop a method to extract microplastics from anhydrous beach sediment. Microplastic is found abundantly in coastal sea environments, including aqueous bottom sediment, and beach sediment (Sagawa, Kawaai, & Hinata, 2018). The scope of the microplastic extraction method in this case is limited to strictly the anhydrous beach sediment. The Venturi Effect and Burnoulli’s Principle have been utilized in the design of a nozzle with airflow that has been injected with a sediment and microplastic heterogenous mixture. A nozzle was designed to operate at the specific terminal velocity of sediment such …

Design And Flight-Path Simulation Of A Dynamic-Soaring Uav, Gladston Joseph

Doctoral Dissertations and Master's Theses

We address the development of a dynamic-soaring capable unmanned aerial vehicle (UAV) optimized for long-duration flight with no on-board power consumption. The UAV’s aerodynamic properties are captured with the integration of variable fidelity aerodynamic analyses. In addition to this, a 6 degree-of-freedom flight simulation environment is designed to include the effects of atmospheric wind conditions. A simple flight control system aids in the development of the dynamic soaring maneuver. A modular design paradigm is adopted for the aircraft dynamics model, which makes it conducive to use the same environment to simulate other aircraft models. Multiple wind-shear models are synthesized to …

On The Local Heat Transfer Behavior Of Supercritical Carbon Dioxide, Neil Sullivan

Doctoral Dissertations and Master's Theses

A detailed study of the local heat transfer behavior of supercritical carbon dioxide (sCO2) is performed. Flows relevant to heat transfer devices, such as sCO2 heaters, recuperators, and internally cooled turbine blades are studied, with particular attention paid to data reduction methodology, and the use of appropriate reference quantities, nondimensionalizations, and correlations. Additionally, a semi-intrusive temperature measurement technique capable of obtaining highly spatially resolved temperature distributions is adapted for use in the challenging conditions of supercritical (SC) flow. SC fluids have proven difficult to study both experimentally and numerically due to dramatically changing thermodynamic and transport properties near the critical …

Computational Investigation Of Perforated Plate Film Cooling Utilizing Conjugate Heat Transfer, Jonathan Sippel

Doctoral Dissertations and Master's Theses

The accuracy of modern state-of-practice computational fluid dynamics approaches in predicting the cooling effectiveness of a perforated plate film-cooling arrangement is evaluated in ANSYS Fluent. A numerical investigation is performed using the Reynolds Averaged Navier Stokes equations and compared to NASA Glenn’s available Turbulent Heat Flux 4 experimental measurements collected as a part of the Transformational Tools and Technologies Project. A multiphysics approach to model heat conduction through the solid geometry is shown to offer significant improvements in wall temperature and film effectiveness prediction accuracy over the standard adiabatic wall approach. Additionally, localized gradient-based grid adaption is analyzed using the …

Analysis Of Ship Airwakes Using Modal Decomposition, Nicholas Zhu

Doctoral Dissertations and Master's Theses

The three-dimensional, unsteady, and turbulent airwake produced by a scaled model of a generic Navy ship (Simple Frigate Shape No. 2) was investigated in a low-speed wind tunnel. Stereoscopic, time-resolved particle image velocimetry (TR-PIV) measurements were made at six different crosswise planes over the flight deck region of the ship model, with and without the effect of a simulated atmospheric boundary layer (ABL).

Spatiotemporal analyses of the TR-PIV measurements were performed using modal decomposition, and the modes were decomposed further based on the frequency contents of their time dynamics. This approach allowed an inspection of the individual scales of the …

A Comparative Study Between 6 Degree-Of-Freedom Trajectory Model And Modified Point Mass Trajectory Model Of Spinning Projectiles, Ange Du

Doctoral Dissertations and Master's Theses

For spinning projectiles, the 6 Degree-of-Freedom model can closely capture their trajectories with high accuracy and details. However, it comes with the drawbacks of long computation time and needing many aerodynamic coefficients which can be hard to obtain. The Modified Point Mass Trajectory Model was introduced as a simplified solution. This work compares them with each other, and with some more conventional methods. A program is developed to simulate and visualize trajectories. With some augmentations, the Modified Point Mass model is able to generate comparable results in most cases, but not including special cases such as when the projectile is …

Comparative Study On The Prediction Of Aerodynamic Characteristics Of Mini - Unmanned Aerial Vehicle With Turbulence Models, Somashekar V, Immanuel Selwyn Raj A

International Journal of Aviation, Aeronautics, and Aerospace

When dealing with CFD simulations the turbulent nature is seen on most of the engineering flows and these flows need to be solved. Reliable and applicable CFD outputs can be obtained from the accurate modelling of the turbulence as it is one of the most vital elements of CFD modelling. The RANS equations are extensively employed to analyse the complex flows over aircraft and for this purpose, a turbulence model is needed for turbulent flow analyses. Compatible turbulence must be chosen for the exact predictions of aircraft aerodynamic characteristics. In this report, numerical analyses of Mini-UAV are done to compare …

A Model For Inhalation Of Infectious Aerosol Contaminants In An Aircraft Passenger Cabin, Bert A. Silich

International Journal of Aviation, Aeronautics, and Aerospace

Aerosol contamination of an aircraft cabin by infectious passengers is a concern of passengers, aircrew and the aviation industry. This may be especially important during a pandemic, such as COVID-19, where the full extent of aerosol transmission is not well understood. A statistical method to determine the number of infectious passengers on board along with a mathematical model estimating the contaminant concentration of aerosols in the cabin and the number of inhaled infectious particles by passengers is presented. An example is used to demonstrated how the results can be estimated during normal operations and emergency conditions with malfunctions of the …

Numerical Analysis Of Aerospike Engine Nozzle Performance At Various Truncation Lengths, Sam Dakka Dr, Oliver Dennison

International Journal of Aviation, Aeronautics, and Aerospace

The aerospike engine was first devised in the early 1960s where it provided new means of reaching orbit in a single stage. The paper aimes to demonstrate the viability of the technology by showcasing the increased nozzle thrust efficiency over the conventional bell nozzle. Various truncations were applied to the nozzle and each was subjected to two conditions, an over-expansion and near optimum condition. The nozzle contour was developed using the simple approximation method and was chosen to replicate that of the XRS-2200. This anchored the data, thereby validating the computational fluid dynamics (CFD) simulation. Simulations were completed for at …

Aerodynamic Performance Analysis Of Co-Flow Jet Airfoil, C M Vigneswaran, Vishnu Kumar G C

International Journal of Aviation, Aeronautics, and Aerospace

The work in this paper aims to increase the maximum lift coefficient of the airfoil by implementing the co-flow jet concept on NACA 0018 airfoil and also to investigate the performance of co-flow jet (CFJ) airfoil. To conduct numerical solution, RANS equations have been solved for 2D incompressible and unsteady flow using the Spalart-Allmaras turbulence model. The suction surface of the airfoil is modified by placing the injection slot near the leading edge and the suction slot near the trailing edge. A small mass of air is withdrawn into the airfoil suction slot, pressurized by a pumping system located inside …

Identification Of Wind-Induced Hazard Zones Impacting Uas Bridge Inspection, Jack J. Green, John Mott

International Journal of Aviation, Aeronautics, and Aerospace

Unmanned Aerial Systems (UAS) continue to grow in both popularity and utility within the national airspace system. The use of commercial UAS for civil inspection, specifically that of bridge structures, is becoming commonplace among practitioners and academics alike. The development of an integrated bridge-inspection hazard model provides a way for UAS operators to prepare for and respond to changing environmental conditions that could otherwise prevent a successful UAS flight. The interaction of wind-induced airflow with bridge surfaces creates an aerodynamic wake that can result in hazardous conditions for a UAS platform operating in close proximity. An analysis of this airflow …

Albatross And Falcon Inspired Bionic Uav: An Aerodynamic Analysis, Bilji C. Mathew, Sagar K. Sahu, Prantik Dutta, Rushi Savale, Muruga Lal Jeyan Jv Dr.

International Journal of Aviation, Aeronautics, and Aerospace

The drone industry yearns for enhanced aerodynamic performance. In order to achieve this feat, researchers and engineers are trying to mimic the natural flyers due to their aerodynamic optimality. One such flyer, the Albatross is an inspiration for many marine drones due to its planform and aerodynamic efficiency. The wing of the plan form is designed and simulated to study its properties. The Bell-Shaped Lift Distribution is incorporated for higher efficiency and elimination of the total downwash produced in case of an Elliptical Lift Distribution. A blended wing body inspired by the Falcon is used for smoother airflow interactions. Furthermore, …

Comparative Study On Performance Accuracy Of Three Probe And Five Probe Flow Analysers For Wind Tunnel Testing, Akhila Rupesh Ms, J V Muruga Lal Jeyan Dr

International Journal of Aviation, Aeronautics, and Aerospace

In the field of inviscid fluid flow studies, the theoretical concept has to be developed even more. In order to make it possible, it is very important to supplement the concepts with strong experimental results. While performing experimentation, various accepts of design can be determined with factors influencing the and also required modification can be recommended in a more systematic and economic manner. Also, the aim objective of the experiment is to extend the underlying theory and to produce new designs with improvements that can be great support to the advancement in technology. In experimental analysis, wind tunnels are used …

Aerodynamic Characterization Of Bio-Mimicked Pleated Dragonfly Aerofoil, Md Akhtar Khan, Chinmaya Padhy

International Journal of Aviation, Aeronautics, and Aerospace

The work inspired by the dragonfly wing corrugation positioned at the front wing's radius section lying at 40% of the total wingspan of forewing from the root section. During gliding flight, dragonfly wings presumed to be an ultra-light aerofoil due to its well-defined cross-sectional corrugation. The aerodynamic simulation carried out to understand the aerodynamic performance of a bio-mimetic dragonfly corrugated airfoil at low Reynolds number range of 75000-150000 to explore the potential advantages of pleated airfoils at a varying angle of attack from 0° to 12°. CFD analysis accomplished by using ANSYS Fluent to understand the aerodynamic performance of the …

Numerical Analysis Of Multi-Functional Surface Acoustic Wave Sensor, Xin Xu

Doctoral Dissertations and Master's Theses

A surface acoustic wave (SAW) sensor can have broad industrial applications due to its compact size, low cost-effectiveness, and versatility of sensible measurands, as well as the wireless capabilities. In this study, a theoretical modeling approach accompanied by a MATLAB-based algorithm of the SAW device is first presented. With the designed dimensional parameters and selected material properties, numerical analyses are performed using COMSOL Multiphysics to validate the theoretical results. Various postprocessing responses of the propagated SAWs in both time and frequency domains, such as time delay, insertion loss, and frequency shift, are examined to evaluate the device performances. Also, the …

Aeroacoustics Of Supersonic Jet Interacting With Solid Surfaces And Its Suppression, Seyyed Saman Salehian

Doctoral Dissertations and Master's Theses

The noise generated by supersonic jet is of primary interest in the high-speed flight. In several flight conditions jet exhaust of the propulsion system interacts with solid surfaces. For example, jet impingement on ground for a rocket lift-off, or interactions influenced by the integration of the engine with the airframe. Such complex applications require consideration of the role of acoustic-surface interactions on the noise generation of the jet and its radiation. Numerical analysis of supersonic jet noise involved in these scenarios is investigated by employing Hybrid Large Eddy Simulation – Unsteady Reynolds Averaged Simulation approach to model turbulence.

First, the …

Contributions To The Understanding Of Ship Airwakes Using Advanced Flow Diagnostic Techniques, Dhuree Seth

Doctoral Dissertations and Master's Theses

The objective of this research was to better characterize the complex, three dimensional, unsteady aerodynamic flows produced by the superstructure of a ship, which is referred to as an airwake. This problem is relevant and important because the turbulent airwake significantly and adversely affects the ability for rotorcraft to operate safely from the decks of Navy ships. To this end, a series of wind tunnel measurements were performed on the SFS2 simplified frigate shape, which has a flight deck at its stern. The measurements were performed with and without a simulated atmospheric boundary layer (ABL), which included the aerodynamic scaling …

Development Of A State-Space Aeroelastic Model Of A Flexible T-Tail Aircraft For Flutter Analysis, Patrick S. Downs

Doctoral Dissertations and Master's Theses

Flutter prediction is an important part of the preliminary design process of any new aircraft. Current analysis methods include coupled fluid structure interaction codes and doublet lattice panel codes. The computation resources and time required for CFD solutions makes them unattractive for preliminary design and doublet lattice models require considerable pre and post processing to provide satisfactory results. Thus, a process for developing an analytical model to facilitate rapid design changes and the implementation of active control systems is the main motivation of this thesis. An analytical model is developed by first deriving the equations of motion of the structure …

Active Drag Reduction Of Ground Vehicles Using Air-Jet Wheel Deflectors, Kaloki Nabutola

Doctoral Dissertations and Master's Theses

Seven turbulence models were used to simulate the flow within the wheelhouse of a simplified vehicle body. The performance of each model was evaluated by comparing the aerodynamic coefficients obtained using computational fluid dynamics (CFD) to data collected from wind tunnel experiments. The performance of large eddy simulation (LES) and detached eddy simulation (DES) was largely dependent on the time step and grid size to accurately resolve turbulent eddies. The standard k-e, realizable k-e, k-w, DES, and LES all trended towards a drag coefficient which was 20% lower than the experimental value. In all numerical cases, the lift coefficient was …

Analysis Of Local Convection Heat Transfer Rates Of Supercritical Carbon Dioxide In Tubes, Yang Chao

Doctoral Dissertations and Master's Theses

Numerical investigation on thermodynamic characteristics of pure supercritical carbon dioxide (𝑆𝐶𝑂2) and mixtures of Helium and 𝑆𝐶𝑂2 in horizontal straight tubes with diameter of 6mm under cooling and heating conditions is carried out by using SST 𝑘 − 𝜔 turbulence model. The computations are conducted at operating pressure of 8MPa with various operating conditions. Simulations are conducted by using the latest poly-hexcore mesh method in ANSYS FLUENT 19.2 and tetrahedral mesh method in CFX 19.2, results and solving time are compared. The effect of heat flux, mass flux, inlet temperature and buoyancy on heat transfer performance are studied, pressure drop …

Dmd And Pod Modal Analysis For Store Separation, Nicholas Peters

Doctoral Dissertations and Master's Theses

Store separation from aircraft and spacecraft has historically been a critical and in some cases fatal issue for the aerospace industry. Given the severity of the issue much effort has been spent on the development of processes to identify failure flight conditions for store separation. The processes currently used for identifying potential failure conditions however are both resource intensive and iterative processes. A potential remedy to reducing resource use and improve turn around time in this process is the implementation of a mode based reduced order model (ROM) for modeling store separation. The objective of this study was to first …

Studies Of Oval Tube And Fin Heat Exchangers, Phillip Nielsen

Undergraduate Student Works

Heating Ventilation and air-conditioning (HVAC) is a system which changes the temperature of the surroundings for the purposes of cooling or heating. This system requires energy to maintain a temperature difference from the outside temperature. Optimizing the flow over the evaporator coils is one way to increase the cooling efficiency. This will reduce the power required to have a sustainable system. Optimizing the flow to increase the energy transfer between the fins and the incoming air could result in a greater Coefficient of Performance (COP). This will be achieved by changing the geometry of the tubes for greater interaction with …

Supercritical Carbon Dioxide Based Heat Exchanger On The Martian, Sarah Guinn

Discovery Day - Prescott

The use of supercritical carbon dioxide (sCO2) in power cycles has been fairly new in the last decade. Due to this, there is a lack in research for both terrestrial and extraterrestrial applications. The purpose of this project is to utilize sCO2 as a working fluid and design and optimize a Brayton Cycle based heat exchanger on the Martian surface. Due to the lack of water on Mars, this research will provide a stronger analysis of planetary based drycooling processes in low atmospheric pressure and colder temperatures. We have been conducting an in-depth analysis of the heat exchanger by modeling …

Arizona Hyperloop: The Fifth Mode Of Transportation, Eleanor Pahl, Matthieu Rada

Discovery Day - Prescott

Arizona Hyperloop is a coalition between Embry-Riddle Aeronautical University and Arizona State University students competing in Elon Musk’s annual SpaceX Hyperloop Pod Competition. Hyperloop is the proposed “Fifth Mode of Transportation” - coined “a cross between a Concorde, a rail gun, and an air hockey table.” A hyperloop pod levitates and travels at nearly the speed of sound inside a vacuum tube, which eliminates air resistance. Musk hosts the annual competition to university students to encourage the evolution of urban transportation. The goal is to design, build, and race the fastest prototype pod at SpaceX’s mile-long test track in Hawthorne, …

Aircraft Leading Edge Strakes On Conventional Naca Wings, Anthony Pirone

Discovery Day - Prescott

The prevention of stall on aircraft wings has been a great challenge over the history of airplanes. As the aircraft become more and more complex, it becomes harder to fit high lift devices and leading-edge devices onto high camber, supercritical airfoil aircraft wings. In the fighter jet class of aircraft the obstacle of stall is usually delayed by the implementation of leading-edge root extensions or strakes. Strakes create a tip vortice along the sharp leading edge that transitions over the surface of the wing preventing separation on both the upper and lower surface of the wing allowing the fighter jet …

Sae Aero West Heavy Lift Competition Team - Eaglenautics, Anthony Pirone, Evan Stuart, Jessica Millard, Nathaniel Scott

Discovery Day - Prescott

ERAU’s SAE Aero Design West Competition team encourages students of all majors who have an interest in the design of heavy-lift cargo and passenger aircraft to design, build, and fly a large RC aircraft to meet a new set of regulations each competition year. Since the team, Eaglenautics, was founded in 2017 it has successfully been to competition once in April 2019 in California. The team’s aircraft flew 4 out of 5 flight rounds, passed all technical inspections, and is now on display in ERAU’s Aero-Fab in the AXFAB. The 2020 competition requirements are unique in that the cargo’s weight-to-volume …

Interaction Of High Aspect-Ratio Micro-Pillars With Wall Turbulence, Pratik Suhas Deshpande

Doctoral Dissertations and Master's Theses

An experimental study of the interaction between hairy structures modeled as high-aspect ratio micro-pillars (HAMuP) and wall turbulence is presented. Micro-pillars are elastic, hair-like microstructures which have been inspired by naturally occurring examples like lateral line sensors in fish and air flow sensors in bats. The objective of this thesis was two fold: to develop a manufacturing process for consistent production of HAMuP arrays, and to conduct a study focusing on the interaction of HAMuP arrays with wall turbulence. Hotwire anemometry measurements were carried out in two different experimental facilities at three different streamwise locations to describe the interaction between …

Active Fault-Tolerance Of The Unmanned Aerial Vehicle Automatic Control Systems, Vuong Anh Trung, Nguyen Van Thinh, Nguyen Duc Thanh, Nguyen Quang Vinh, Tran Thuan Hoang

International Journal of Aviation, Aeronautics, and Aerospace

This paper presents an introductory overview of principles of the three-layer hierarchy of active fault-tolerance, providing, determination of the fault type with as many details as enough to get recoverable fault reason and failure toleration by flexible redundancy using; the conception of active fault-tolerant control in abnormal modes is described. Developed models and methods of a systematic approach to fault tolerance in the direction of the effective use of the signal, parametric and structural redundancies and selection of parrying tools. Performed experimental researches of the unmanned aerial vehicle (UAV) automatic control systems (ACS).

Design, Construction And Testing Of A 3-Component Force Balance For Educational Wind Tunnels In Undergraduate Aerodynamics, Milan Tomin, Marco Scipioni, Benjamin Gatti

Journal of Aviation/Aerospace Education & Research

This article is focused on providing detailed instructions on how to build and use a force balance for educational wind tunnels. The article’s objective is to encourage undergraduate students in underfunded programs to engage in the field of aerodynamics. The discussed force balance represents an affordable device that only requires basic components like Arduino board, a servo motor, and acrylic and aluminum as construction materials. A simple data collection example is included at the end of the article showing that this simple force balance can collect meaningful data about lift, drag, and moment coefficient of a tested airfoil.