Aerospace Engineering Commons^™

Nusat I Project, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "NUSAT I Project" from 2023.

Bifurcation Levels Of The Integral Manifolds Of The Newtonian N-Body Problem, Hannah G. Havel

CURE Proceedings

The N-body problem, first proposed by Isaac Newton, is a field of study in mathematics and physics that involves predicting the motion of particles moving under their mutual gravitational attraction. It has significance to many areas of science, including physics and computer science, and is crucial in understanding how the universe works. In fact, it was a primary motivation for Newton's development of calculus. An important application of the N-body problem is within celestial mechanics and involves how planets and other celestial bodies move with mutual gravitational attraction. It is important in developing how satellites behave in space using complicated …

Ads-B Communication Interference In Air Traffic Management, George Ray

International Journal of Aviation, Aeronautics, and Aerospace

Automated Dependent Surveillance Broadcast (ADS-B) provides position and state information about aircraft and is becoming an essential component in the global air traffic management system. ADS-B transponders broadcast this key information on a common frequency to both other aircraft and to secondary surveillance radar systems located at ground stations. Both the aircraft transponders and the ground stations work together to assist in managing the commercial airspace. Since the aircraft transponders all broadcast on the same frequency and are in close proximity there is an apparent risk of interference and the garbling of the communications needed to manage the airspace.

The …

Statistical Analysis To Evaluate The Impact Of Quality Control And Quality Assurance On The Aircraft Maintenance Turnaround Time, Deepak Chandra Chandola, Seema Verma, Kamal Jaiswal, Rajendrra Prasad Khaolliya, Preeti Chandola

International Journal of Aviation, Aeronautics, and Aerospace

The turnover time for aircraft maintenance is crucial for the operational efficiency and profitability of airlines. Quality assurance (QA) and quality control (QC) procedures play a role in assuring the safe and reliable operation of aircraft. The purpose of this paper is to evaluate the impact of QC and QA on turnover time and to propose strategies for achieving a balance between quality and efficiency. A large-scale survey of airline and aviation maintenance organization maintenance staff was combined with a literature study to form a mixed-methods strategy. The findings indicate that quality control and quality assurance have a substantial impact …

Enhancing Trajectory-Based Operations For Uavs Through Hexagonal Grid Indexing: A Step Towards 4d Integration Of Utm And Atm, Deepudev Sahadevan Neelakandan, Hannah Al Ali

International Journal of Aviation, Aeronautics, and Aerospace

Aviation is expected to face a surge in the number of manned aircraft and drones in the coming years, making it necessary to integrate Unmanned Aircraft System Traffic Management (UTM) into Air Traffic Management (ATM) to ensure safe and efficient operations. This research proposes a novel hexagonal grid-based 4D trajectory representation framework for unmanned aerial vehicle (UAV) traffic management that overcomes the limitations of existing square/cubic trajectory representation methods. The proposed model employs a hierarchical indexing structure using hexagonal cells, enabling efficient ground based strategic conflict detection and conflict free 4D trajectory planning. Additionally, the use of Hexagonal Discrete Global …

Future Directions Of Space Education, Kimberly T. Luthi Dr., Andy Aldrin, Keith Wilson, Jim P. Solti

International Journal of Aviation, Aeronautics, and Aerospace

The future of space operations graduate education is reliant on industry leaders’ contributions to help forecast the needs of the industry. The aim of the current study is to build consensus on the future direction of the space industry and generate new knowledge on what the industry expects to occur in the future of space studies education. This study documents the responses of 14 industry experts who currently or previously held highly visible senior leadership positions in a company or organization within the government or the commercial space industry and have extensive experience in a variety of management and leadership …

Experimental Validation Of Inertia Parameters And Attitude Estimation Of Uncooperative Space Targets Using Solid State Lidar, Alessia Nocerino, Roberto Opromolla, Giancarmine Fasano, Michele Grassi, Spencer John, Hancheol Cho, Riccardo Bevilacqua

Student Works

This paper presents an experimental activity aimed at assessing performance of techniques for inertia and attitude parameters estimation of an uncooperative but known space target. The adopted experimental set-up includes a scaled-down 3D printed satellite mock-up, a spherical air bearing and a low-cost solid-state LIDAR. The experimental facility also comprises a motion capture system to obtain a benchmark of the pose (position and attitude) parameters and an ad-hoc designed passive balancing system to keep the centre of mass as close as possible to the centre of rotation. The LIDAR-based 3D point clouds, collected while the target rotates on the spherical …

3d-Printed Hydrogels Dressings With Bioactive Borate Glass For Continuous Hydration And Treatment Of Second-Degree Burns, Fateme Fayyazbakhsh, Michael J. Khayat, Candy Sadler, Delbert Day, Yue-Wern Huang, Ming-Chuan Leu

Biological Sciences Faculty Research & Creative Works

Recent advances in additive manufacturing have led to the development of innovative solutions for tissue regeneration. Hydrogel materials have gained significant attention for burn wound treatment in clinical practice among various advanced dressings due to their soothing and moisturizing activity. However, prolonged healing, pain, and traumatic removal due to the lack of long-term wound hydration are some of the challenges in the treatment of second-degree burn wounds. In this study, 3D-printed dressings were fabricated using gelatin, alginate, and bioactive borate glass (BBG) using an extrusion-based bioprinter. After ionic crosslinking, the 3D-printed dressings were characterized for mechanical properties, degradation rate, hydration …

Underwater Communication Acoustic Transducers: A Technology Review, Laila Shams, Tian-Bing Xu, Zhongqing Su (Ed.), Branko Glisic (Ed.), Maria Pina Limongelli (Ed.)

Mechanical & Aerospace Engineering Faculty Publications

This paper provides a comprehensive review on transducer technologies for underwater communications. The popularly used communication transducers, such as piezoelectric acoustic transducers, electromagnetic acoustic transducers, and acousto-optic devices are reviewed in detail. The reasons that common air communication technologies are invalid die to the differences between the media of air and water are addresses. Because of the abilities to overcome challenges the complexity of marine environments, piezoelectric acoustic transducers are playing the major underwater communication roles for science, surveillance, and Naval missions. The configuration and material properties of piezoelectric transducers effects on signal output power, beamwidth, amplitude, and other properties …

Missile Modeling And Simulation Of Nominal And Abnormal Scenarios Resulting From External Damage, James Manuel Floyd Iii

Graduate Theses, Dissertations, and Problem Reports (ETD)

This thesis presents the development of a six-degree-of-freedom flight simulation environment for missiles and the application thereof to investigate the flight performance of missiles when exposed to external damage. The simulation environment was designed to provide a realistic representation of missile flight dynamics including aerodynamic effects, flight control systems, and self-guidance. The simulation environment was designed to be modular, expandable, and include realistic models of external damage to the missile body obtained by adversarial counteraction.

The primary objective of this research was to examine missile flight performance when subjected to unspecified external damage, including changes in trajectory, stability, and controllability, …

Integrated Immunity-Based Methodology For Uav Monitoring And Control, Ryan G. Mclaughlin

Graduate Theses, Dissertations, and Problem Reports (ETD)

A general integrated and comprehensive health management framework based on the artificial immune system (AIS) paradigm is formulated and an automated system is developed and tested through simulation for the detection, identification, evaluation, and accommodation (DIEA) of abnormal conditions (ACs) on an unmanned aerial vehicle (UAV). The proposed methodology involves the establishment of a body of data to represent the function of the vehicle under nominal conditions, called the self, and differentiating this operation from that of the vehicle under an abnormal condition, referred to as the non-self. Data collected from simulations of the selected UAV autonomously flying a set …

Design And Manufacture Of An Aerodynamic Body That Meets Scaling Law Requirements And Survives Severe G-Load Environment For Free-Flight Testing, Anthony R. Gonzalez

Graduate Theses, Dissertations, and Problem Reports (ETD)

Design and Manufacture of an Aerodynamic Body that Meets Scaling Law Requirements and Survives Severe G-load Environment for Free-Flight Testing

Anthony Gonzalez

Developing scale models to test functionality and ascertain aerodynamic properties is critical before manufacturing full-size products. Through dimensional analysis and similitude, engineers create scale models to test any parameter of interest. This research aims to design a scale model of an aerodynamic body for repeated free-flight testing. The Froude number is the dominant scale model law used to determine the geometric, mass, and inertia scaling laws. A critical requirement for this research is that the model should be …

Optimal Deployment Of Air Vehicle As Communication Relay For Multiple Ground Vehicles, Juan David Pabon Arias

Graduate Theses, Dissertations, and Problem Reports (ETD)

Heterogeneous teams of both air and ground mobile vehicles can combine the advantages of mobility, sensing capability, and operation time when performing complex tasks. However, when ground vehicles operate in cluttered environments with randomized obstacles, they may experience line of sight (LoS) obstructions and loss of communication due to those obstacles. To mitigate this issue, an airborne relay can be positioned in the vicinity of the ground vehicles to aid communication by establishing two-hop communication links between the vehicles.

This thesis develops an analytical framework to calculate the probability of spanning a two-hop communication between a pair of ground vehicles …

Probabilistic Short Term Solar Driver Forecasting With Neural Network Ensembles, Joshua Daniell

Graduate Theses, Dissertations, and Problem Reports (ETD)

Commonly utilized space weather indices and proxies drive predictive models for thermosphere density, directly impacting objects in low-Earth orbit (LEO) by influencing atmospheric drag forces. A set of solar proxies and indices (drivers), F_10.7, S_10.7, M_10.7, and Y_10.7, are created from a mixture of ground based radio observations and satellite instrument data. These solar drivers represent heating in various levels of the thermosphere and are used as inputs by the JB2008 empirical thermosphere density model. The United States Air Force (USAF) operational High Accuracy Satellite Drag Model (HASDM) relies on JB2008, and …

Spin Recovery Analysis On A Simulation Model Of The Nasa F-18 High Alpha Research Vehicle (Harv) Using Thrust Vectoring, Brock M. Dolly

Graduate Theses, Dissertations, and Problem Reports (ETD)

In the early years of aviation, spins were poorly understood and frequently fatal. With just over a century of research and experiments dedicated to spins, today’s aviation world has a very firm grasp on spin aerodynamics. Most fighter aircraft have airframes and control surfaces specifically designed to ensure the ability of departure from the possible spin modes the aircraft can enter. An alternative and/or additional approach is given by thrust vectoring. Implementing thrust vectoring into spin recovery can potentially save an aircraft and/or the life of the pilot in situation where control-surface-only spin recovery is not able to recover the …

Optimal Path Planning For Aerial Robots Using Genetic Algorithm, Anna Puigvert I Juan

Graduate Theses, Dissertations, and Problem Reports (ETD)

This thesis presents a path optimization solution for a robot in two different constrained 3-dimensional (3D) environments. The robot is required to travel from its current position to a goal position following minimum cost paths (optimal paths). The first environment has 3D obstacles that interfere with the robot’s path. The path cost for this environment accounts for the minimum distance traveled by the robot from the start to the goal position while avoiding obstacles. The second environment is the atmosphere of Venus, specifically a flyable region of this atmosphere with characteristics similar to Earth’s. This environment has strong westward winds …

Development Of A Regeneratively Cooled Liquid Rocket Engine, Dillon Petty, Nicole Zimmerli

Williams Honors College, Honors Research Projects

An additively manufactured (AM) liquid rocket engine, consisting of an injector, combustion chamber, and nozzle, was designed and printed using state-of-the-art methods and materials. The parts were manufactured using laser powder bed fusion. Additive manufacturing allowed for complex geometries and features, such as printing manifolds onto the components with a reduced number of parts. Additive, regenerative cooling channels were designed into the chamber and nozzle to allow for long-duration steady-state operation.

The feed system for the engine was designed and built to allow for pressure-regulated and steady-state testing. Tanks for the fuel and oxidizer were designed and built for a …

Quadcopter Airfoil Analyses, Isabella Allen, Nicholas Tolson, Trevor Mccaffrey

Williams Honors College, Honors Research Projects

This project focuses on the aerodynamic analysis of airfoils for quadcopter applications, aiming to optimize the performance of quadcopters through the selection and analysis of various 3D printed airfoil profiles. Quadcopters are unmanned aerial vehicles with four rotors arranged in a symmetric configuration. Each diagonal pair rotates in the same direction, allowing the offset to ensure the quadcopter remains level. The airfoil selection is crucial as it impacts aerodynamic performance, stability, and efficiency. The parameter of interest in these airfoils is maximum thrust and settling thrust produced, along with material wear of the propellers themselves. The testing of thrust production …

Implementing Systems Engineering Practices To The Zips Aero Design Team, Kaitlyn Bebb, Ariel Bryan

Williams Honors College, Honors Research Projects

The Zips Aero Design Team is a college sponsored design team that competes each year through the American Institute of Aeronautics and Astronautics (AIAA) Design Build Fly (DBF) competition. The rules generally consist of 3 differing flight missions and a ground mission, with overarching requirements such as size, takeoff distance, and battery limitations. A complex set of rules such as these is meant to be difficult for even the best of teams to master, especially without proper organization and project management. This senior design report outlines the benefits of implementing systems engineering to the Zips Aero Design Team, through multiple …

Surface Preparation Study, Ryan Ferguson

Williams Honors College, Honors Research Projects

This work explores a custom air atmospheric pressure plasma treatment (APPT) machine’s effectiveness in cleaning and chemically activating a CFRP surface. It is explore by implementing water contact angle (WCA) measurements, water-break free (WBF) testing, and adhesive tubular lap-joint (TLJ) tensile testing. An 8x3 test matrix of different machine parameters is defined with the bounding conditions being the machine’s capabilities and industry standard recommendations. Each configuration of the test matrix is explored after treatment at multiple time intervals up to 2 weeks afterwards to gain insight into the outlife of the treatments with the intention of adhesively bonding to the …

Landing Gear Sealing Solution, Andrew Milligan

Williams Honors College, Honors Research Projects

XYZ Landing Gear Solutions has been tasked with redesigning two internal components of the landing gears for the ABC-123 aircraft program. The customer, ABC Aeronautics, informed XYZ Landing Gear Solutions that a particular system of the landing gear does not meet the necessary performance requirements of the program. As a result, the entire system will have to be removed, facilitating the need for a redesign of the two components that the system interfaced with. The focus of this project will be completing the redesign process for both of these components. “Redesign” and “design” will be used interchangeably in this report. …

Media Streaming In A High-Rate Delay Tolerant Network, Kyle Vernyi

Williams Honors College, Honors Research Projects

Audio and video streaming across delay tolerant networks are relatively new phenomena. During the Apollo 11 mission, video and audio were streamed directly back to Earth using fully analog radios. This streaming capability atrophied over time. The gradual conversion to digital electronics contributed greatly to this. Additionally, 21st century space systems face the new requirement of interconnectedness. Delay Tolerant Networking (DTN) attempts to solve this requirement by uniting traditional point to point links into a robust and dynamic network. However, DTN implementations present bottlenecks due to low performance. High-Rate Delay Tolerant Networking (HDTN) is a performance-optimized DTN implementation. This work …

Induced Drag Laboratory Curriculum With Variable Aspect Ratio Wing, Alexander Milligan, Elizabeth Plyler

Williams Honors College, Honors Research Projects

A laboratory curriculum for undergraduate students at The University of Akron enrolled in 4600:413 Introduction to Aerodynamics was created to allow students a hands-on opportunity to study the basic fundamentals of aerodynamically induced drag. To accomplish this, a 3D printed wing was created with variable aspect ratio. This wing is to be utilized in the laboratory experiment in The University of Akron subsonic wind tunnel to generate data on lift on drag at different airspeeds, angles of attack, and aspect ratios. The laboratory curriculum provides basic theory applicable to the wind tunnel experiments as well as question prompts and data …

Space Force Design Project, Emily Greene, Ashton Orosa, Julia Patek, Nathan Doty

Williams Honors College, Honors Research Projects

The objective of our research project is to develop a lab testbed composed of a curved surface to represent a spacecraft hull, a mobile robot equipped with repair tools, and a robotic arm equipped with a laser 3D scanner. This project is part of a larger grant to the University of Akron from Space Force and Air Research Labs. The lab testbed developed in this project will be used to assist in creating and testing a software and algorithm to inspect and repair spacecraft while in orbit. The project will involve researching spacecraft hulls to create an accurate simulation bed, …

To The Moon: Strategic Competition In The Cislunar Region, Shawn M. Willis

Faculty Publications

China’s advancing space capabilities, particularly in the cislunar region, call for increased cislunar space domain awareness on the part of the United States. US military and civilian decisionmakers must take into account the full scope of China’s cislunar plans and capabilities as the military builds space strategies and future force designs. The United States must also increase near-term investments that support more robust cislunar space domain awareness.

Fostering Safer Evacuations Aboard Commercial Aircraft: A Problem-Solution Analysis, George Skinner

Student Works

This problem-solution analysis analyzes factors impeding safe and orderly evacuations for the Federal Aviation Administration (FAA). Although rarely used, evacuation procedures are critical for keeping passengers safe during emergency situations. However, there are flaws in these procedures and many factors exist which make aircraft evacuations slow and dangerous. During a situation in which time is of the essence, these impediments can make the difference between an incident and a fatal accident. This report focuses on data gathered through full-scale evacuation simulations and analyzes shortcomings and strengths in three accidents. This information is then compared to current procedures and regulations that …

Solar Sailing Adaptive Control Using Integral Concurrent Learning For Solar Flux Estimation, Luis Enrique Mendoza Zambrano, Riccardo Bevilacqua

Student Works

In the interest of exploiting natural forces for propellant-less spacecraft missions, this investigation proposes an adaptive control strategy to account for unknown parameters in the dynamic modeling of a reflectivity-controlled solar sail spacecraft. A Lyapunov-based control law along with integral concurrent learning is suggested to accomplish and prove global exponential tracking of the estimated parameters and states of interest, without satisfying the common persistence of excitation condition, which in most nonlinear systems cannot be guaranteed a priori. This involves estimating the solar flux or irradiance from the Sun to account for uncertainty and variation over time in this value. To …

Dual Quaternion Relative Dynamics For Gravity Recovery Missions, Ryan Kinzie, Riccardo Bevilacqua, Seo Dongeun

Student Works

A dual quaternion modeling approach is compared to traditional modeling methods for formation flying spacecraft utilized for gravity recovery missions. A modeling method that has traditionally been used for gravity recovery missions is presented which models the motion of two formation flying spacecraft and a test mass. This is followed by the dual quaternion-based formulation for the equations of motion of the twelve degree-of-freedom coupled relative dynamics of formation flying spacecraft and a test mass. Lastly, utilizing data products from the Gravity Recovery and Climate Experiment Follow-On mission, a comparison of these two modeling methods is presented which proves the …

Noise Reduction Techniques In Commercial Aircraft Cabins, Hashem Hashem

Student Works

Main sources of noise heard inside an aircraft cabin:

• Engines
• Airframe & control surfaces
• Window vibrations
• Passenger announcements & activities.

Alternatives To Reducing Aviation Fuel-Burn With Technology: Fully Electric Autonomous Taxibot, Denzil Neo

Student Works

Aircraft taxiing operations in the aerodrome were identified to consume the most jet fuel apart from the cruise phase of the flight. This was also well supported by various research associating taxi operations at large, congested airports, with high jet fuel consumption, high carbon emissions, and noise pollution. Existing literature recognised the potential to address the environmental issues of aerodrome taxi operations by operating External or Onboard Aircraft Ground Propulsion Systems (AGPS). Designed to power aircraft with sources other than their main engines, external Aircraft Ground Power Systems (AGPS) have shown the potential to significantly cut jet fuel consumption and …