Aerospace Engineering Commons^™

Rotorcraft Lander Fixed To A Descending Capsule Backshell, Corey Zucker

Electronic Theses and Dissertations, 2020-2023

NASA is financing a mission to study the surface of Titan, Saturn's largest moon, to investigate the terrain, chemical compositions, and potential for existent life. This mission is an exciting advancement from Mars Ingenuity, because the quadrotor lander, Dragonfly, will be the first of its kind with four coaxial rotors. Upon entry into Titan, and at near surface atmospheric conditions, Dragonfly will exit a parachute supported backshell that has shed its protective heatshield. The aerodynamics of this state are significant in comprehending the dynamics of the overall system for successful deployment into powered flight. The studies presented here examine the …

Hypersonic Aero-Optic Measurements In A High-Pressure Shock Tube, Jonathan P. Mcgaunn

Graduate Thesis and Dissertation 2023-2024

The high-pressure shock tube facility (HiPER-STAR) at the University of Central Florida (UCF) is analyzed experimentally to demonstrate the practicality of hypersonic aero-optical testing in an impulse facility without the use of an expansion nozzle or acceleration tube. The investigation analyses driver gas blending with helium and hydrogen to raise the speed of sound ratio in an attempt to increase the Mach number for aero-optics testing. HiPER-STAR has a unique ability to withstand pressures up to 1000 atm and run in a double diaphragm configuration allowing for a significant pressure differential to be created between the driver and driven sections. …

Thermal Management Strategies For Hypersonic Flight: Supercritical Co2 Jet Impingement Cooling Investigation For Leading Edge, Manoj Prabakar Sargunaraj

Graduate Thesis and Dissertation 2023-2024

This study addresses the critical need for effective thermal management in hypersonic vehicles facing intense heat at their leading edge due to high enthalpy flow. The objective is to propose an active impingement cooling system that ensures the structural stability and performance of these vehicles. This dissertation presents an in-depth exploration of the numerical simulations conducted on the hypersonic leading edge, focusing on a 3mm radius with active cooling utilizing supercritical carbon dioxide (sCO2) as the coolant. The research incorporates conjugate simulations that merge external hypersonic flow and sCO2 active cooling. Utilizing a thermodynamic non-equilibrium two-temperature model and various chemical …

Efficacy, Durability And Design Of A Bucket Wheel Excavator For Icy Lunar Regolith, Austin Lohsandt

Electronic Theses and Dissertations

This research project focused on the design and testing of a prototype bucket wheel excavator developed for NASA's Break the Ice Lunar Challenge, which sought innovative ideas for lunar excavation. Several attempts have been made by other universities and private industries to create systems that can successfully excavate simulated frozen regolith, however, few have been successful. The chosen excavation technology employed a bucket wheel concept inspired by large open-pit mining machines, modified to incorporate grinding nubs for pulverizing lunar simulant material. The goals included proving the viability of a bucket wheel excavator for lunar excavation, exploring grinding nubs, conducting durability …

Air Traffic Management Principles: A Case Study On How To Create A Sustainable System, Eva Maleviti

Publications

BEYOND ENVIRONMENTAL SUSTAINABILITY

• Emissions, SAF, CORSIA, Design
• Economic growth and development
• Sustainability should go beyond environment
• Non-technology approaches for sustainability and Net-Zero targets
• What about social sustainability and people?

In the total share of aviation emissions (1GT CO2) 3% is 3Mt CO2. Small share but very significant contribution.

Strategies Aircraft Manufacturing Organizational Leaders Use For Proper Material Pricing, Chin Kuei Jen

Walden Dissertations and Doctoral Studies

The lack of proper material pricing strategies can challenge manufacturers’ profitability and growth. Aircraft manufacturing leaders are concerned because understanding and developing material pricing strategies are essential to increasing profitability. Grounded in price theory, the purpose of this qualitative single case study was to explore strategies aircraft manufacturing organizational leaders use for proper material pricing estimates. The participants were four aircraft manufacturing organizational leaders from a successful aircraft manufacturing business located in the state of Georgia. Data were gathered from semistructured interviews and document reviews and analyzed using Yin’s five step approach. The four themes that emerged were the impact …

Fine-Grained Activity Classification In Assembly Based On Multi-Visual Modalities, Haodong Chen, Niloofar Zendehdel, Ming-Chuan Leu, Zhaozheng Yin

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Assembly activity recognition and prediction help to improve productivity, quality control, and safety measures in smart factories. This study aims to sense, recognize, and predict a worker's continuous fine-grained assembly activities in a manufacturing platform. We propose a two-stage network for workers' fine-grained activity classification by leveraging scene-level and temporal-level activity features. The first stage is a feature awareness block that extracts scene-level features from multi-visual modalities, including red, green blue (RGB) and hand skeleton frames. We use the transfer learning method in the first stage and compare three different pre-trained feature extraction models. Then, we transmit the feature information …

Static I-V Based Pim Evaluation For Spring And Fabric-Over-Foam Contacts, Kalkidan W. Anjajo, Yang Xu, Shengxuan Xia, Yuchu He, Haicheng Zhou, Hanfeng Wang, Jonghyun Park, Chulsoon Hwang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Spring Clips and Fabric-Over-Foams (FOFs) Are Widely Used in Mobile Devices for Electrical Connection Purposes. However, the Imperfect Metallic Connections Tend to Induce Passive Intermodulation (PIM), Resulting in a Receiver Sensitivity Degradation, Known as RP Desensitization. Due to the Complexity of the PIM Characterization, there is Not Yet a Way to Evaluate PIM Performance using a Simple Setup for Environments Like Factories. in This Paper, a Current-Voltage (I-V) Behavior-Based PIM Evaluation Method is Proposed and Validated with Various Metallic Contacts and Contact Forces. the Test Results Demonstrated the Feasibility of the PIM Performance Evaluation based on the Measured Static I-V …

Mixed-Input Learning For Multi-Point Landing Guidance With Hazard Avoidance Part Ii: Learning-Based Guidance Algorithm, Sixiong You, Chaoying Pei, Vinay Kenny, Ran Dai, Jeremy R. Rea

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper investigates the three-dimensional (3D) multi-point landing guidance (MLG) problem with hazard avoidance by developing a mixed-input learning-based method to achieve precise and fuel-efficient planetary landing in future Mars missions. Specifically, we aim to find a safe, fuel-efficient landing point and generate a fuel-optimal trajectory simultaneously in real-time. First, by introducing binary variables, the MLG problem is formulated as an optimal control problem with quadratic constraints. Then, by formulating the Hamiltonian function, the necessary conditions of optimality for the MLG problem are obtained, where the critical parameters are identified to represent the complete optimal solution. After that, to find …

Distributed Optimization For Rank-Constrained Semidefinite Programs, Chaoying Pei, Sixiong You, Chuangchuang Sun, Ran Dai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This letter develops a distributed optimization framework for solving the rank-constrained semidefinite programs (RCSPs). Since the rank constraint is non-convex and discontinuous, solving an optimization problem with rank constraints is NP-hard and notoriously time-consuming, especially for large-scale RCSPs. In the proposed approach, by decomposing an unknown matrix into a set of submatrices with much smaller sizes, the rank constraint on the original matrix is equivalently transformed into a set of constraints on the decomposed submatrices. The distributed framework allows parallel computation of subproblems while requiring coordination among them to satisfy the coupled constraints. As the scale of every subproblem solved …

Topologically Optimized Electrodes For Electroosmotic Actuation, Jianwen Sun, Jianyu Zhang, Ce Guan, Teng Zhou, Shizhi Qian, Yongbo Deng

Mechanical & Aerospace Engineering Faculty Publications

Electroosmosis is one of the most used actuation mechanisms for the microfluidics in the current active lab-on-chip devices. It is generated on the induced charged microchannel walls in contact with an electrolyte solution. Electrode distribution plays the key role on providing the external electric field for electroosmosis, and determines the performance of electroosmotic microfluidics. Therefore, this paper proposes a topology optimization approach for the electrodes of electroosmotic microfluidics, where the electrode layout on the microchannel wall can be determined to achieve designer desired microfluidic performance. This topology optimization is carried out by implementing the interpolation of electric insulation and electric …

Comparison Of Dynamics Stability Testing Techniques With Magnetic Suspension Wind Tunnel Capabilities, Otoniel A. Ramirez, Mark Schoenenberger, David E. Cox, Colin P. Britcher

Mechanical & Aerospace Engineering Faculty Publications

Dynamic stability testing techniques currently utilized at NASA Langley Research Center (LaRC) are conducted in multiple facilities and consists of free flight, forced oscillation, and free-to-oscillate tests. The NASA/ODU Magnetic Suspension and Balance System (MSBS) has been recommissioned to explore its utility as an additional facility to expand the dynamic stability test capabilities currently available at NASA LaRC. Simulations were created to replicate each current test facility and method as closely as possible. Data collected from the simulated environments was corrupted with replicated noise sources of the different testing environments and then compared to real data collected during tests when …

Patch-Wise Training With Convolutional Neural Networks To Synthetically Upscale Cfd Simulations, John P. Romano, Alec C. Brodeur, Oktay Baysal

Mechanical & Aerospace Engineering Faculty Publications

This paper expands the authors’ prior work[1], which focuses on developing a convolutional neural network (CNN) model capable of mapping time-averaged, unsteady Reynold’s-averaged Navier-Stokes (URANS) simulations to higher resolution results informed by time-averaged detached eddy simulations (DES). The authors present improvements over the prior CNN autoencoder model that result from hyperparameter optimization, increased data set augmentation through the adoption of a patch-wise training approach, and the predictions of primitive variables rather than vorticity magnitude. The training of the CNN model developed in this study uses the same URANS and DES simulations of a transonic flow around several NACA 4-digit airfoils …

Model Based Systems Engineering With A Docs-As-Code Approach For The Sealion Cubesat Project, Kevin Chiu, Sean Marquez, Sharanabasaweshwara Asundi

Mechanical & Aerospace Engineering Faculty Publications

The SeaLion mission architecture team sought to create a model-based systems engineering approach to assist improving CubeSat success rates as well as for the SeaLion CubeSat project to guide an implementation for the flight software. This is important because university CubeSat teams are growing in number but often have untrained students as their core personnel. This was done using a document-as-code, or docs-as-code, approach. With this the team created tools for the systems architecture with the Mach 30 Modeling Language to create an architecture that is easy to learn and use even for newly admitted team members with little to …

Exploring Additive Manufacturing In A Space Environment - A Capstone Design Project Experience, Zain Zafar Khan, Zachary Alan Sobelman, Sharanabasaweshwara Asundi

Mechanical & Aerospace Engineering Faculty Publications

The employment of additive manufacturing in the non-standard environments like space, ships, or submarines has the potential to be an advanced utility not only in the pre-flight production of aerospace components and structures, but also for the onboard manufacturing of components and tools necessary for future space missions. For example, the ability to produce tools and structural components on the International Space Station can provide the space community the opportunity to make repairs and upgrades to the space station without wasting time and resources transporting such materials through additional missions. Additive manufacturing would allow for space missions to use on …

Convolutional-Neural-Network-Based Des-Level Aerodynamic Flow Field Generation From Urans Data, John P. Romano, Oktay Baysal, Alec C. Brodeur

Mechanical & Aerospace Engineering Faculty Publications

The present paper culminates several investigations into the use of convolutional neural networks (CNNs) as a post-processing step to improve the accuracy of unsteady Reynolds-averaged Navier–Stokes (URANS) simulations for subsonic flows over airfoils at low angles of attack. Time-averaged detached eddy simulation (DES)-generated flow fields serve as the target data for creating and training CNN models. CNN post-processing generates flow-field data comparable to DES resolution, but after using only URANS-level resources and properly training CNN models. This document outlines the underlying theory and progress toward the goal of improving URANS simulations by looking at flow predictions for a class of …

Numerical Study Of The Time-Periodic Electroosmotic Flow Of Viscoelastic Fluid Through A Short Constriction Microchannel, Jianyu Ji, Shizhi Qian, Armani Marie Parker, Xiaoyu Zhang

Mechanical & Aerospace Engineering Faculty Publications

Electroosmotic flow (EOF) is of utmost significance due to its numerous practical uses in controlling flow at micro/nanoscales. In the present study, the time-periodic EOF of a viscoelastic fluid is statistically analyzed using a short 10:1 constriction microfluidic channel joining two reservoirs on either side. The flow is modeled using the Oldroyd-B (OB) model and the Poisson-Boltzmann model. The EOF of a highly concentrated polyacrylamide (PAA) aqueous solution is investigated under the combined effects of an alternating current (AC) electric field and a direct current (DC) electric field. Power-law degradation is visible in the energy spectra of the velocity fluctuations …

Artificial Intelligence-Enabled Exploratory Cyber-Physical Safety Analyzer Framework For Civilian Urban Air Mobility, Md. Shirajum Munir, Sumit Howlader Dipro, Kamrul Hasan, Tariqul Islam, Sachin Shetty

VMASC Publications

Urban air mobility (UAM) has become a potential candidate for civilization for serving smart citizens, such as through delivery, surveillance, and air taxis. However, safety concerns have grown since commercial UAM uses a publicly available communication infrastructure that enhances the risk of jamming and spoofing attacks to steal or crash crafts in UAM. To protect commercial UAM from cyberattacks and theft, this work proposes an artificial intelligence (AI)-enabled exploratory cyber-physical safety analyzer framework. The proposed framework devises supervised learning-based AI schemes such as decision tree, random forests, logistic regression, K-nearest neighbors (KNN), and long short-term memory (LSTM) for predicting and …

A Numerical Analysis Of Shock Angles From Inward Turning Axisymmetric Flows, William L. Hilal

Honors Undergraduate Theses

Detonation-based propulsion systems are known for their high efficiency and energy release when compared to deflagrative systems, making them an ideal candidate in hypersonic propulsion applications. One such engine is the Oblique Detonation Wave (ODW) engine, which has a similar architecture to traditional scramjets but shortens the combustor and isolator to an anchored ODW after fuel injection.

Previous research has focused on using a two-dimensional wedge to induce an ODW while limiting total losses through the combustor. In this configuration, a two-dimensional wedge-based architecture entails a rectangular duct, limiting potential inlet design and increasing overall skin friction. However, an inward-turning …

An Optimization Study Of Small-Scale Propeller Blade, Fahad M. Nabid

Honors Undergraduate Theses

This research paper aims to investigate the optimization of smaller propeller blades to achieve maximum efficiency by studying the effect of the twist angle on reducing drag, increasing thrust, and preventing rapid wear on the blade. Inefficient propellers consume a significant amount of energy, particularly during low-speed flights. The low Reynolds number regime challenges aviation engineers to design propellers with the highest possible efficiency to minimize energy losses. The primary objective of this thesis is to optimize smaller propeller blade shapes to enable them to produce maximum efficiency. The advanced ratio of a propeller blade heavily influences the blade's performance …

Hypersonic Scramjet Inlet Development For Variable Mach Number Flows, Zachary P. White

Honors Undergraduate Theses

Hypersonic propulsion has become an increasingly important research field over the past fifty years, and subsequent interest in propulsion systems utilizing supersonic combustion has emerged. Air-breathing engines are desirable for such applications as hypersonic flight vehicles would not need to carry an oxidizer. Therefore, hypersonic air-breathing propulsion systems require an inlet with high mass capture and compressive efficiency. The present work seeks to outline the development and validation of a novel design tool for producing air inlet designs for hypersonic vehicles at variable flight conditions. A Busemann inlet was chosen for its high compressive efficiency, geometric flexibility, and existing experimental …

The Development Of Computational Models For Melting-Solidification Applications Using The Volume-Of-Fluid Method, Brendon Cavainolo

Electronic Theses and Dissertations, 2020-2023

Fluids-related issues in the Aerospace industry are often multiphase in scope. Numerical modeling, such as computational fluid dynamics, is used to describe these problems, as they are difficult or impossible to describe analytically. This research uses computational fluid dynamics to describe multiphase problems related to melting-solidification and particle impingement. Firstly, a numerical model was established that uses the Volume-of-Fluid method to resolve a melting/solidifying particle. This model was verified against experiments and simplified analytical models, and a mesh independence study was done to ensure the results were independent of the mesh sizing. Next, the model was applied to two separate …

A Computational Fluid Dynamic Analysis Of Oxyacetylene Combustion Flow For Use In Material Response Boundary Conditions, Craig Meade

Theses and Dissertations--Mechanical and Aerospace Engineering

Oxyacetylene torches are used in the aerospace industry and research to test thermal protection system materials (TPS) due to their high flame temperatures and high heat flux capabilities. The purpose of this work is to determine a combustion model to accurately simulate the high temperature flow of an oxyacetylene torch. The flow conditions around a sample material can then be used as boundary conditions when modeling TPS material response. Two separate combustion models with equilibrium chemistry were investigated using ANSYS Fluent™; the Eddy-Dissipation Model, and the Partially Premixed model.The results of this study are compared to existing experiments for validation.

Stratospheric Glider Measurements Of Atmospheric Parameters, Anisa Haghighi

Theses and Dissertations--Mechanical and Aerospace Engineering

In June 2021 a series of high altitude flights were conducted in Spaceport America, NM, using a balloon launched Uncrewed Aircraft System (UAS) to assess its capability to conduct measurements of various atmospheric properties and study turbulence in the troposphere and lower stratosphere. This UAS descends using an automated flight trajectory. The instruments aboard included a NASA-developed infrasonic microphone to evaluate its remote turbulence detection capabilities and a five-hole probe capable of measuring the in situ wind vector. Also on board were temperature, humidity and wind profile sensors. This document focuses on the atmospheric properties measured at high altitudes, the …

Impact Of Spallation And Internal Radiation On Fibrous Ablative Materials, Raghava Sai Chaitanya Davuluri

Theses and Dissertations--Mechanical and Aerospace Engineering

Space vehicles are equipped with Thermal Protection Systems (TPS) that encounter high heat rates and protect the payload while entering a planetary atmosphere. For most missions that interest NASA, ablative materials are used as TPS. These materials undergo several mass and energy transfer mechanisms to absorb intense heat. The size and construction of the TPS are based on the composition of the planetary atmosphere and the impact of various ablative mechanisms on the flow field and the material. Therefore, it is essential to quantify the rates of different ablative phenomena to model TPS accurately. In this work, the impact of …

Precision Meteorological Prediction Employing A Data-Driven, Adaptive, Real-Time (Dart) Approach, Sujit Sinha

Theses and Dissertations--Mechanical and Aerospace Engineering

The objective of this research is to improve precision meteorological prediction, benefiting both uncrewed aerial vehicle (UAV) operations by avoiding hazardous flight conditions and tracking contaminant or toxic clouds caused by incidents, accidents, or fires. The operational concept is to collect meteorological observations from instruments mounted on a swarm of UAVs, telemeter the data to a weather simulation model, revise the predicted solution by adapting the flow field to the observations, and then transmit the updated forecast to appropriate personnel as well as to the guidance system of UAVs for repositioning to the next set of most beneficial measurements. While …

Detonability Of A Rotating Detonation Combustor Seeded With Carbon/Hydrocarbon Particles At Fringe Operating Conditions, Matthew Hopwood

Electronic Theses and Dissertations, 2020-2023

The Rotating Detonation Combustor (RDC) has, in recent years, been a subject of great interest in the pressure-gain combustion research community. Researchers have been investigating the RDC as a potential improvement over current combustors in today's turbomachinery-based power generation systems. With the theoretical efficiency boost that detonations provide over deflagrating combustors, RDCs have the promise to be a next step in fuel/cost savings in the power generation industry. One mode of research to push an RDCs capabilities is the potential use of combustible carbon/hydrocarbon solid particles in addition to liquid or gaseous fuels. These particles are a source of high …

Heat Release And Flame Scale Effects On Turbulence Dynamics In Confined Premixed Flows, Max Fortin

Electronic Theses and Dissertations, 2020-2023

As industry transitions to a net-zero carbon future, turbulent premixed combustion will remain an integral process for power generating gas turbines and are also desired for aviation engines due to their ability to minimize pollutant emissions. However, accurately predicting the behavior of a turbulent reacting flow field remains a challenge. To better understand the dynamics of premixed reacting flows, this study experimentally investigates the evolution of turbulence in a high-speed bluff-body combustor. The combustor is operated across a range of equivalence ratios from 0.7-1 to quantify the role of heat release and flame scales on the evolution of turbulence as …

On The Simulation Of Supersonic Flame Holder Cavities With Openfoam, Zachary Chapman

Electronic Theses and Dissertations

One of the next major advancements in the aerospace industry will be hypersonic flight. However, to achieve hypersonic flight, propulsion systems capable of reaching hypersonic speeds need to be developed. One of the more promising hypersonic propulsion systems is the scramjet engine, however, several problems still need to be explored before reliable scramjet engines can be produced, the biggest being keeping the engine ignited. This has led to the use of flame holder cavities to create a region of subsonic flow within the engine to allow combustion to occur. High experimental costs make the use of computational fluid dynamic (CFD) …

Nusat I Project, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "NUSAT I Project" from 2023.