Open Access. Powered by Scholars. Published by Universities.®

Aerospace Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2010

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 151 - 180 of 304

Full-Text Articles in Aerospace Engineering

Fatigue Behavior Of An Advanced Sic/Sic Composite With An Oxidation Inhibited Matrix At 1200°C In Air And In Steam, Jacob Delapasse Mar 2010

Fatigue Behavior Of An Advanced Sic/Sic Composite With An Oxidation Inhibited Matrix At 1200°C In Air And In Steam, Jacob Delapasse

Theses and Dissertations

The fatigue behavior of an advanced Silicon Carbide/Silicon Carbide (SiC/SiC) ceramic matrix composite (CMC) with oxidation inhibited matrix was investigated at 1200˚C in laboratory air and in steam environments. The composite consisted of an oxidation inhibited SiC matrix reinforced with Hi-Nicalon fibers coated with pyrolytic carbon (PyC) with a boron carbide overlay woven into eight-harness-satin (8HS) weave plies. Tensile stress-strain behavior and tensile properties were evaluated at 1200˚C. Tension-tension fatigue tests were conducted in both laboratory air and in steam at 1200˚C at frequencies of 0.1 Hz, 1.0 Hz, and 10 Hz. The tension-tension fatigue tests had a ratio of …

Go to article

Numerical Investigation Of Pre-Detonator Geometries For Pde Applications, Robert T. Fievisohn Mar 2010

Numerical Investigation Of Pre-Detonator Geometries For Pde Applications, Robert T. Fievisohn

Theses and Dissertations

A parametric study was performed to determine optimal geometries to allow the successful transition of a detonation from a pre-detonator into the thrust tube of a pulse detonation engine. The study was performed using a two-dimensional Euler solver with progress variables to model the chemistry. The geometrical configurations for the simulations look at the effect of shock reflections, flow obstructions, and detonation diffraction to determine successful geometries. It was observed that there are success and failure rates associated with pre-detonators. These success rates appear to be determined by the transverse wave structure of a stably propagating detonation wave and must …

Go to article

Validation Of A Novel Approach To Solving Multibody Systems Using Hamilton's Weak Principle, Ashton D. Hainge Mar 2010

Validation Of A Novel Approach To Solving Multibody Systems Using Hamilton's Weak Principle, Ashton D. Hainge

Theses and Dissertations

A novel approach for formulating and solving for the dynamic response of multibody systems has been developed using Hamilton’s Law of Varying Action as its unifying principle. In order to assure that the associated computer program is sufficiently robust when applied across a wide range of dynamic systems, the program must be verified and validated. The purpose of the research was to perform the verification and validation of the program. Results from the program were compared with closed-form and numerical solutions of simple systems, such as a simple pendulum and a rotating pendulum. The accuracy of the program for complex …

Go to article

Analysis Of Hybrid-Electric Propulsion System Designs For Small Unmanned Aircraft Systems, Ryan M. Hiserote Mar 2010

Analysis Of Hybrid-Electric Propulsion System Designs For Small Unmanned Aircraft Systems, Ryan M. Hiserote

Theses and Dissertations

Currently fielded electric-powered small unmanned aircraft systems (UAS) lack the endurance desired by warfighters, while their internal combustion engine (ICE) driven counterparts generate mission compromising acoustic and thermal signatures. Parallel hybrid-electric propulsion systems would meet the military’s needs by combining the advantages of hydrocarbon and electric power systems. Three distinct parallel hybrid-electric system designs, each with three unique battery discharging profiles, were analyzed and compared using a constrained static optimization formulation based upon traditional aircraft design equations. Each system combined an ICE sized for cruise speed with an electric motor sized for endurance speed. The nine hybrid variations were compared …

Go to article

Particle Size Control For Piv Seeding Using Dry Ice, Brian T. Love Mar 2010

Particle Size Control For Piv Seeding Using Dry Ice, Brian T. Love

Theses and Dissertations

Particle image velocimetry (PIV) has been carried out using solid carbon dioxide (CO2) particles as the seed material to continue the development of clean seeding for use in large-scale, closed-circuit tunnels. Testing occurred in two wind tunnels at subsonic and supersonic speeds using dry ice particles generated by allowing liquefied CO2 to expand from a small diameter injector tube through a larger diameter shroud tube. The particles were injected into the plenum and discrete solid particles, suitable for PIV measurements, were present in the test section. Data on particle size were first collected using a Malvern particle …

Go to article

Consideration Of Wear Rates At High Velocities, Stephen P. Meador Mar 2010

Consideration Of Wear Rates At High Velocities, Stephen P. Meador

Theses and Dissertations

The goal of this research is to study sliding contact wear of test sled slippers at high velocities. Experimentation representative of the slippers is infeasible, so numerical studies are used. An Eulerian-Lagrangian hydrocode called CTH is used to study mechanical wear. Failure criteria have been established to evaluate the stresses and strains resulting from the hydrocode simulation of a single asperity collision. The results from the hydrocode simulations are scaled to account for slipper bounce and multiple asperities, and these results produce total wear values that are approximately 90% of total experimental wear. Slipper thermodynamics have also been evaluated. The …

Go to article

Back-Pressure Effect On Shock-Train Location In A Scramjet Engine Isolator, Richard I. Paek Mar 2010

Back-Pressure Effect On Shock-Train Location In A Scramjet Engine Isolator, Richard I. Paek

Theses and Dissertations

The isolator of the scramjet decelerates the incoming high Mach flow to a lower Mach number and stabilizes the flow before it enters the combustor. Because of the unsteady combustion phenomenon and inconsistent completeness of the combustion, pressures within the combustor can vary drastically. These pressure variations can propagate forward and affect the flow field in the isolator - worst case unstarting the inlet. In this research, the shock train location versus the back-pressure is examined experimentally. The back-pressure is artificially created by symmetric (top & bottom) ramps that can close the flow area. Raising/lowering ramps result in higher/lower back-pressure. …

Go to article

Disturbance Observer: Design And Flight Test Of A Large Envelope Flight Controller, Donevan A. Rein Mar 2010

Disturbance Observer: Design And Flight Test Of A Large Envelope Flight Controller, Donevan A. Rein

Theses and Dissertations

A new flight controller was evaluated through piloted simulation and flight test conducted at the USAF Test Pilot School. The controller, commonly called a disturbance observer, uses inertial sensor feedback routed through a simple control architecture that acts to force the desired response while rejecting sensor noise and atmospheric disturbances. The investigation included both handling qualities testing in the Octonian simulator at the Air Force Research Laboratories Air Vehicle Directorate, and initial flight test conducted as part of a Test Management Project at the USAF TPS. Simulation produced positive results with desired performance throughout a wide flight envelope. In addition, …

Go to article

Conceptual Design Tool For Fuel-Cell Powered Micro Air Vehicles, Paul M. Hrad Mar 2010

Conceptual Design Tool For Fuel-Cell Powered Micro Air Vehicles, Paul M. Hrad

Theses and Dissertations

A conceptual design tool was built to explore power requirements of a hybrid-power system for Micro Air Vehicles (MAVs) comparable in size to the Cooper's Hawk. An inviscid aerodynamic code, Athena Vortex Lattice (AVL), and a motor-propeller analysis code, QPROP, provide overall lift, drag, and thrust data for power-required calculation as functions of many variables to include mass, platform geometry, altitude, velocity, and mission duration. Phoenix Technologies’ Model Center was used to integrate multi-disciplinary components that employ specific power and specific energy of two power sources to determine power system mass required for a designated mission. The tool simulated a …

Go to article

Dive Angle Sensitivity Analysis For Flight Test Safety And Efficiency, Matthew T. Schneider Mar 2010

Dive Angle Sensitivity Analysis For Flight Test Safety And Efficiency, Matthew T. Schneider

Theses and Dissertations

Flutter envelope expansion is one of the most critical types of developmental flight tests. The regions that present the most dangerous flight profiles are those test points in the negative PS realm of the flight envelope. These points develop into high-speed dives and require an accurate predictive model to prevent possible testing accidents. As a flight test is conducted, several conditions such as aircraft weight and ambient air temperature can change, causing a drastic shift in the excess power profiles resulting in significant alteration in the test conditions. Using a dive planning model, a number of parameters were analyzed to …

Go to article

Thrust And Performance Study Of Micro Pulsed Plasma, Jeremy J. Selstrom Mar 2010

Thrust And Performance Study Of Micro Pulsed Plasma, Jeremy J. Selstrom

Theses and Dissertations

This research is focused on several areas of the μPPT performance. An important idea studied is the effect of lifetime use on the performance. The thruster is fired for a simulated lifetime of use to see if there is an impact on the thrust of the thruster later in life. Also vital is the efficiency of the thruster. A μPPT performing at max efficiency will ionize all ablated material; however, we know that not to be the case. In this research the effort is made to collect these non-ionized particles in order to measure their mass post-test. With this collected …

Go to article

Structural Response Of Slotted Waveguide Antenna Stiffened Structure Components Under Compression, Joseph W. Sabat Jr. Mar 2010

Structural Response Of Slotted Waveguide Antenna Stiffened Structure Components Under Compression, Joseph W. Sabat Jr.

Theses and Dissertations

The Slotted Waveguide Antenna Stiffened Structure (SWASS) is an aircraft system that can provide the capabilities of a stiffened panel skin structure and a slotted waveguide radar antenna simultaneously. The system made from carbon fiber reinforced polymers is designed around a 10 GHz radar frequency in the X-band range and uses a WR-90 waveguide as a baseline for design. The system is designed for integration into fuselage or wing sections of intelligence, surveillance, and reconnaissance (ISR) aircraft and would increase the system performance through the availability of increased area and decreased system weight. Elemental parts of the SWASS structure were …

Go to article

A Structural Dynamic Analysis Of A Manduca Sexta Forewing, Travis W. Sims Mar 2010

A Structural Dynamic Analysis Of A Manduca Sexta Forewing, Travis W. Sims

Theses and Dissertations

Micro air vehicles (MAVs) are intended for future intelligence, surveillance, and reconnaissance use. To adequately fulfill a clandestine capacity, MAVs must operate in close proximity to their intended target without eliciting counter-observation. This objective, along with DARPA’s constraint of a sub-15 centimeter span, requires future MAVs to mimic insect appearance and flight characteristics. This thesis describes an experimental method for conducting a structural analysis of a Manduca Sexta (hawkmoth) forewing. Geometry is captured via computed tomography (CT), and frequency data is collected using laser vibrometry in air and vacuum. A finite element (FE) model is constructed using quadratic beams and …

Go to article

Design Of A Film Cooling Experiment For Rocket Engines, Andrew L. Sincock Mar 2010

Design Of A Film Cooling Experiment For Rocket Engines, Andrew L. Sincock

Theses and Dissertations

The Film Cooling Rig (FCR) is a new test rig at the Air Force Institute of Technology (AFIT) to study film cooling for rocket engine applications. The original researcher designed, built, and then utilized the FCR to study radial curvature effects on film cooling for a non-combustion environment. This effort modified the FCR by adding propane-air combustion. Modular stainless steel test sections were produced to allow study of various curvatures and coolant injection angles. A pre-mixed burner was designed and built to deliver main flow mass flow rates necessary to produce blowing ratios as low as 0.5. A water cooling …

Go to article

Cfd Analysis Of Experimental Wing And Winglet For Falconlaunch 8 And The Exfit Program, Benjamin P. Switzer Mar 2010

Cfd Analysis Of Experimental Wing And Winglet For Falconlaunch 8 And The Exfit Program, Benjamin P. Switzer

Theses and Dissertations

Reusable launch vehicles have many benefits over their expendable counterparts. These benefits range from cost reductions to increased functionality of the vehicles. Further research is required in the development of the technology necessary for reusable launch vehicles to come to fruition. The Air Force Institute of Technology’s future involvement in the ExFIT program will entail designing and testing of a new wing tip mounted vertical stabilizer in the hypersonic regime. One proposed venue for experimentation is to utilize the United States Air Force Academy’s FalconLAUNCH Program which annually designs, builds, and launches a sounding rocket capable of reaching hypersonic speeds. …

Go to article

Off-Design Analysis Of A High Bypass Turbofan Using A Pulsed Detonation Combustor, Caitlin R. Thorn Mar 2010

Off-Design Analysis Of A High Bypass Turbofan Using A Pulsed Detonation Combustor, Caitlin R. Thorn

Theses and Dissertations

Past research has indicated that implementation of a pulsed detonation combustor (PDC) into a high-bypass turbofan engine yields a more efficient engine at design conditions. It is proposed that performance gains can be made utilizing this hybrid engine off-design. A hybrid high-bypass turbofan engine with a PDC model was evaluated for a range of Mach numbers, altitudes, and fill fractions in the Numerical Propulsion System Simulation (NPSS). Results were compared to a conventional baseline high-bypass turbofan engine that shares the same architecture with the hybrid. The NPSS baseline engine was validated using the Aircraft Engine Design System (AEDsys) program and …

Go to article

Exfit Flight Design And Structural Modeling For Falconlaunch Viii Sounding Rocket, Michael J. Vinacco Mar 2010

Exfit Flight Design And Structural Modeling For Falconlaunch Viii Sounding Rocket, Michael J. Vinacco

Theses and Dissertations

This research effort furthers the Air Force’s study of reusable launch vehicles and hypersonic airfoils by conducting a hypersonic flight test using the US Air Force Academy’s FalconLAUNCH VIII sounding rocket. In this study, two experimental fin tips were designed and attached to the sounding rocket in place of two stabilizer fins in order to collect data throughout the rocket’s hypersonic flight profile. The desire to research, study, and test experimental fin tips was driven by the Air Force Research Laboratory’s Future responsive Access to Space Technologies (FAST) program and their desire to include vertical stabilizers on the wing tips …

Go to article

Performance Of A Small Internal Combustion Engine Using N-Heptane And Iso-Octane, Cary W. Wilson Mar 2010

Performance Of A Small Internal Combustion Engine Using N-Heptane And Iso-Octane, Cary W. Wilson

Theses and Dissertations

With the sustained interest in Unmanned Aircraft Systems (UAS) and Micro Air Vehicles (MAV), the military services have a real need for vehicles powered by an internal combustion (IC) engine that can run efficiently on heavy hydrocarbon fuels, especially JP-8 due to established logistics. This thesis concerns the results of running a two horsepower, 4-stroke, spark-ignition engine (FUJI BF34-EI) with both iso-Octane and n-Heptane. Results include the knocking characteristic of this engine with n-Heptane, a comparison of the brake specific fuel consumption (BSFC) of the two fuels in a factory delivered engine configuration with a 17x10 APC propeller loading, a …

Go to article

Simulation And Application Of Gpops For Trajectory Optimization And Mission Planning Tool, Danielle E. Yaple Mar 2010

Simulation And Application Of Gpops For Trajectory Optimization And Mission Planning Tool, Danielle E. Yaple

Theses and Dissertations

Rapid trajectory generation is crucial to prompt global warfare. To meet the USAF’s objective of Persistent and Responsive Precision Engagement, a rapid mission planning tool is required. This research creates the framework for the mission planning tool and provides a sample optimal trajectory which is solved using the GPOPS software package. GPOPS employs a Gaussian pseudospectral method to solve the non-linear equations of motion with both end conditions and path constraints. By simultaneously solving the entire trajectory based on an initial guess and small number of nodes, this method is ideal for generating rapid solutions. The sample case is a …

Go to article

Design Analysis Of A Sapce Based Chromotomographic Hyperspectral Imaging Experiment, Todd A. Book Mar 2010

Design Analysis Of A Sapce Based Chromotomographic Hyperspectral Imaging Experiment, Todd A. Book

Theses and Dissertations

This research develops the design of several components and/or systems for an experimental space-based chromotomographic hyperspectral imager that is being built by the Air Force Institute of Technology. The design work includes three separate topics. The first topic was the development of a structure utilizing finite element analysis and eigenanalysis for the ground-based version of the chromotomographic experiment (CTEx). The ground-based experiment was performed as a risk mitigation measure for the space-based experiment. The second topic includes a design review of a contractor's proposed off-axis Mersenne telescope for the space-based chromotomographic hyperspectral imager. The work included the creation of preliminary …

Go to article

Relative Orbit Elements For Satellites In Elliptical Orbits, Kirk W. Johnson Mar 2010

Relative Orbit Elements For Satellites In Elliptical Orbits, Kirk W. Johnson

Theses and Dissertations

The purpose of this research was to describe the unperturbed relative motion of Earth satellites in elliptical orbits using a simple dynamics model whose parameters allow significant geometrical insight and operational efficacy. The goal was to retain the advantages of the Relative Orbit Elements (ROE) realization of the Hill-Clohessy-Wiltshire (HCW) equations, a linearized dynamics model for circular reference orbits. Specifically, this thesis analyzed the geometry of satellite rendezvous and proximity operations using the ROE parameters to characterize the model’s utility. Next, through a comprehensive literature review, this thesis sought possible approaches for developing a similarly useful parameterization for chief orbits …

Go to article

Mission Analysis And Design For Space Based Inter-Satellite Laser Power Beaming, Nicholas M. Keller Mar 2010

Mission Analysis And Design For Space Based Inter-Satellite Laser Power Beaming, Nicholas M. Keller

Theses and Dissertations

This research effort develops an interdisciplinary design tool to optimize an orbit for the purpose of wirelessly beaming power from the International Space Stations (ISS) Japanese Experimental Module Exposed Facility (JEM/EF) to a target satellite. For the purpose of this initiative, the target satellite will be referred to as FalconSAT6, a reference to the proposed follow-on satellite to the U.S. Air Force Academy’s (USAFA) FalconSAT5 program. The USAFA FalconSAT program provides cadets an opportunity to design, analyze, build, test and operate small satellites to conduct Department of Defense (DoD) space missions. The tool developed for this research is designed to …

Go to article

Estimating Characteristics Of A Maneuvering Reentry Vehicle Observed By Multiple Sensors, Evan M. Brooks Mar 2010

Estimating Characteristics Of A Maneuvering Reentry Vehicle Observed By Multiple Sensors, Evan M. Brooks

Theses and Dissertations

Post flight analysis of ballistic missile reentry vehicles is an area of focus for the U.S. Government, especially for those involved in ballistic missile defense. Typically, this analysis incorporates either a model-driven least squares filter or a data-following Kalman filter. The research performed here developed a filter that attempts to integrate the strengths of both filters. A least squares filter operates on observation data collected during exoatmospheric free flight and a Kalman filter is used to analyze data collected lower in the atmosphere, where potential maneuvers could be performed. Additionally, the filter was written to incorporate data from multiple sensors. …

Go to article

Investigation Of A Novel Compact Vibration Isolation System For Space Applications, Steven D. Miller Mar 2010

Investigation Of A Novel Compact Vibration Isolation System For Space Applications, Steven D. Miller

Theses and Dissertations

A novel compact vibration isolation system was designed, built, and tested for the Space Chromotomography Experiment (CTEx) being built by Air Force Institute of Technology (AFIT) researchers. CTEx is a multifunctional experimental imaging chromotomographic spectrometer designed for flight on the International Space Station (ISS) and is sensitive to jitter caused by vibrations both through the support structure as well as those produced on the optical platform by rotating optical components. CTEx demands a compact and lightweight means of vibration isolation and suppression from the ISS structure. Vibration tests conducted on an initial isolator design resulted in changes in the chosen …

Go to article

Preliminary Electrical Designs For Ctex And Afit Satellite Ground Station, Arthur L. Morse Mar 2010

Preliminary Electrical Designs For Ctex And Afit Satellite Ground Station, Arthur L. Morse

Theses and Dissertations

This thesis outlines the design of the electrical components for the space-based ChromoTomography Experiment (CTEx). CTEx is the next step in the development of high-speed chromotomography at the Air Force Institute of Technology. The electrical design of the system is challenging due to the large amount of data that is acquired by the imager and the limited resources that is inherent with space-based systems. Additional complication to the design is the need to know the angle of a spinning prism that is in the field of view very precisely for each image. Without this precise measurement any scene that is …

Go to article

Prototype Development And Dynamic Characterization Of Deployable Cubesat Booms, Grant M. Thomas Mar 2010

Prototype Development And Dynamic Characterization Of Deployable Cubesat Booms, Grant M. Thomas

Theses and Dissertations

The current barrier to CubeSat proliferation is their lack of utility depth. These small satellites are exceptionally well suited for specific space missions such as space weather observation and other scientific data gathering exploits; however, they are not suited for every mission. The 10cm-cube form factor that gives the CubeSat its unique advantage is also its greatest hindrance. A potential bridge over this gap is the successful integration of deployable booms onto the CubeSat structure. With this research, the Air Force Institute of Technology (AFIT) explored the parameters of deployable tapespring booms using the triangular retractable and collapsible (TRAC) cross- …

Go to article

Accurate Dynamic Response Predictions Of Pnpsat I, Michael D. Trottier Mar 2010

Accurate Dynamic Response Predictions Of Pnpsat I, Michael D. Trottier

Theses and Dissertations

Researchers at the Air Force Institute of Technology (AFIT) and the Operationally Responsive Space (ORS) Office have conducted extensive vibration testing and structural modeling on the first ORS Plug-and-Play Satellite (PnPSAT I). The intent of this research effort is to evaluate the premise that current post-integration spacecraft environmental test requirements can be reduced or modified using accurately tuned finite element (FE) models. As part of this research, modal testing was conducted on the PnPSAT I structural panels at AFIT. The modal testing was part of a much larger series of experimental trials on various configurations of PnPSAT I at the …

Go to article

Minimizing Losses In A Space Laser Power Beaming System, Charlie T. Bellows Mar 2010

Minimizing Losses In A Space Laser Power Beaming System, Charlie T. Bellows

Theses and Dissertations

A mathematical model is developed to track the amount of power delivered in a wireless laser power beaming system. In a wireless system the power proceeds through several different stages before being delivered to a payload for use. Each of these stages results in power losses that are thoroughly examined and modeled, allowing for the calculation of the likely amount of power delivered. Adjusting variable factors within the model allows for the optimization of the system for a specific task. The model shows that an optimized wireless power transfer system can deliver enough power to meet the space experiment objectives. …

Go to article

Development Of A Remotely Operated Autonomous Satellite Tracking System, Michael E. Graff Mar 2010

Development Of A Remotely Operated Autonomous Satellite Tracking System, Michael E. Graff

Theses and Dissertations

AFIT is currently developing a capability to remotely and autonomously track LEO satellites using commercial telescopes. Currently, the system is capable of open-loop tracking based on Two-Line Element sets (TLEs) downloaded from NORAD’s space object catalog. The ability to actively track using a closed-loop control system would allow tracking of satellites which deviated from the published TLEs along with providing some information about the object’s new orbital elements. To accomplish closed-loop tracking, the object is imaged by a digital camera connected to a wide field-of-view (WFOV) spotting scope. Software was developed to provide azimuth and elevation inputs in order to …

Go to article

Orbit Maneuver For Responsive Coverage Using Electric Propulsion, Timothy S. Hall Mar 2010

Orbit Maneuver For Responsive Coverage Using Electric Propulsion, Timothy S. Hall

Theses and Dissertations

The use of continuous electric propulsion to manipulate a satellite’s orbit offers significant potential for enhancing coverage of a target in ways not previously considered. Elliptical orbits utilizing a very low perigee can facilitate access to the surface and atmosphere of the Earth at sub-ionosphere altitudes while counteracting atmospheric drag forces using continuous electric propulsion. Additionally, in-plane and out-of-plane manipulation of both circular and elliptical orbits can allow for passage of a satellite over a target at a given time. Sustained low perigee orbit was modeled with an initial perigee altitude of 100 km and various apogee altitudes to derive …

Go to article

First Prev Next Last