Aerospace Engineering Commons^™

Validation Of The Chemistry Module For The Euler Solver In Unified Flow Solver, William C. Humphrey Jr.

Theses and Dissertations

In the world of computational fluid dynamics (CFD), three main types of flow regimes exist: continuum, rarified, and free molecular. Of these regimes, the rarified regime is the most difficult to model because the continuum equations don't apply and using the Boltzmann equation is too computationally expensive to use. The Unified Flow Solver (UFS) is currently being developed to solve this problem by using the kinetic continuum Euler equations where valid, and only using the Boltzmann equation where necessary, thus reducing the computational cost. The use of the kinetic Euler equations helps to aid in the coupling of the Euler …

Gravitational Lens: Deep Space Probe Design, Berkley R. Davis

Theses and Dissertations

A number of interstellar precursor missions have been designed, but they have all made use of unproven future technologies. This research focuses on designing an interstellar precursor mission to the gravitational lens that can be manufactured solely with today's technology. The design includes an examination of trip time and trajectory, a system trade between subsystems, a launch vehicle analysis and an overall spacecraft performance analysis. The trip time was found to be approximately 108 years using the NEXT thruster and GPHS power source. The GPHS provided approximately 4 kW of power at BOL. The communications subsystem relied on a 12 …

Impact Of Trench And Ramp Film Cooling Designs To Reduce Heat Release Effects In A Reacting Flow, Michael R. Delallo

Theses and Dissertations

Increasing combustor fuel-air ratios are a recent area of concern in gas turbine film cooling due to the potential for heat release on the surface of film-cooled components. This investigation compared four different cooling designs on their heat release potential: namely fanned, normal and radial trenched, and ramped. Measurements of heat flux to the downstream surface, when subjected to a reacting mainstream flow, provide a qualitative comparison between the four tested configurations. Furthermore, this work studied the effect of multiple injection points in series along the surface of a flat plate. An upstream set of normal holes and an upstream …

Methane Dual Expander Aerospike Nozzle Rocket Engine, Michael D. Moen

Theses and Dissertations

The Air Force Institute of Technology (AFIT), working to meet requirements set by the Air Force Research Laboratory's Next Generation Engine (NGE) initiative, is developing upper stage rocket models. The current path of investigation focuses on combining a dual expander cycle with an aerospike nozzle, or the Dual Expander Aerospike Nozzle (DEAN) using methane fuel. The design process will rely heavily on AFIT's previous work, which focused on the development of tools for and the optimization of a hydrogen/oxygen DEAN engine. The work outlined in this paper expands the existing research by substituting methane for hydrogen. The targets derived from …

Characterization Of Centrifugally-Loaded Flame Migration For Ultra-Compact Combustors, Kenneth D. Lebay

Theses and Dissertations

The Air Force Research Laboratory (AFRL) has designed an Ultra Compact Combustor (UCC) showing viable merit for significantly reducing gas turbine combustor length making it a viable candidate for implementation as an inter-turbine burner and realization of efficiency benefits from the resulting near constant temperature cycle. This concept uses an off-axis combustor cavity and projects approximately 66% length reduction over a conventional combustor. The annular nature of the cavity creates high angular acceleration levels, on the order of 500-3500 g's, resulting in strong centrifugal and buoyant forces. This unique combination works to significantly reduce the required burn time and subsequently …

Development Of A Star Tracker-Based Reference System For Accurate Attitude Determination Of A Simulated Spacecraft, Jorge G. Padro

Theses and Dissertations

The goal of this research effort is to investigate the analysis, design, integration, testing, and validation of a complete star tracker and star field simulator system concept for AFIT's satellite simulator, SimSat. Previous research has shown that while laboratory-based satellite simulators benefit from star trackers, the approach of designing the star field can contribute significant error if the star field is generated on a flat surface. To facilitate a star pattern that better represents a celestial sky, a partially hemispherical dome surface is suspended above SimSat and populated with a system of light emitting diodes of various intensities and angles …

Desensitizing Flame Structure And Exhaust Emissions To Flow Parameters In An Ultra-Compact Combuster, Adam K. Parks

Theses and Dissertations

A major thrust of turbine engine research is to improve both efficiency and thrust-to-weight ratio of the engine. A promising solution to this challenge is the Ultra-Compact Combustor (UCC). The UCC shortens the axial length of the combustor by performing combustion circumferentially on the outer diameter of the engine. The reduction in axial length yields significant weight savings and increases the thrust-to-weight ratio. The design also increases combustion efficiency by performing the combustion in a centrifugally loaded environment which allows unreacted particles to remain in the combustor sufficiently long enough to become combustion products. The Air Force Institute of Technology …

Application Of Multi-Input Multi-Output Feedback Control For F-16 Ventral Fin Buffet Alleviation Using Piezoelectric Actuators, Tomoyuki D. Ono

Theses and Dissertations

Control of structural vibrations has been a popular topic. Use of MFC piezoelectric actuators and co-located sensors allows for an active rather than passive control method. The F-16 ventral fin is susceptible to buffet induced vibrations and is a perfect test structure for active vibration control for flight-testing. The research follows the previous ACTIVE FIN project and improves on the design by increasing the number of actuator layers, available actuator power, and using multi-input multi-output (MIMO) control algorithms. The research involved experimental identification of the ventral fin and its principle strain directions, selection of system components, determination of mathematical plant …

Development And Testing Of A Rotating Detonation Engine Run On Hydrogen And Air, Jason C. Shank

Theses and Dissertations

Rotating detonation engines (RDEs) have the potential for greater efficiencies over conventional engines by utilizing pressure gain combustion. A new modular RDE (6 in diameter) was developed and successfully run on hydrogen and standard air. The RDE allows for variation of injection scheme and detonation channel widths. Tests provided the operational space of the new RDE as well as characterized detonation unsteadiness. It was found that a smaller equivalence ratio than previous was required to obtain continuous detonations. Also discovered was VCJ was reached in the RDE, but not sustained.

Creep Of Hi-Nicalon S Ceramic Fiber Tows At Elevated Temperature In Air And In Steam, Benjamin R. Steffens

Theses and Dissertations

Structural aerospace components require materials to have superior long-term mechanical properties that can withstand severe environmental conditions, such as high temperatures, high pressures and moisture, whilst enduring the loads they are designed for. Ceramic-matrix composites (CMCs) are capable of maintaining excellent strength and creep resistance at high temperatures, which make them attractive candidate materials for aerospace applications, particularly in propulsion. Silicon Carbide (SiC) ceramic fibers have been used as constituent materials in CMCs, although oxidation of the SiC to SiO₂ has been a known degredation mechanism. Recently developed near stoichiometric SiC fibers have shown significant improvements in thermochemical stability; …

A Finite Element Analysis Of A Carbon Fiber Composite Micro Air Vehicle Wing, Theodore A. Szelag

Theses and Dissertations

Micro-air vehicles (MAV)s provide a valuable and low observable way to do the jobs that the Air Force deems to be dull, dirty and dangerous. Basing the design of an MAV wing on that of a biological counterpart will provide a proven design that is capable of achieving the mission requirements. This research is designed to analyze the design and manufacturing of a wing based off the Manduca Sexta.

Inaccuracies in the fiber orientation can result in substantial changes in the material properties. Experimental vibration data of composite material samples manufactured using a three-ply [0/90/0] small non-homogenous fiber composite provided …

Build Up And Operation Of An Axial Turbine Driven By A Rotary Detonation Engine, Jonathan R. Tellefsen

Theses and Dissertations

Detonation combustors provide advantages over current deflagration combustors due to their pressure gain and simplicity of design. Rotary detonation engines (RDEs) offer advantages over pulsed detonation engines (PDEs) due to a steadier exhaust and fewer total system losses. All previous research on turbine integration with detonation combustors has focused on utilizing PDEs to drive axial and centrifugal turbines. The objective of this thesis was the integration and testing of an axial turbine driven by a rotary detonation engine (RDE) to determine turbine operability. In pursuit of this objective, convergent nozzle sections were placed on the RDE to simulate the back-pressurization …

Empirical Characterization Of Unconstrained Tape Spring Deployment Dynamics, Daniel M. Williams

Theses and Dissertations

Satellite cost and mission capability are very sensitive to mass requirements. Mass or volume savings in one component will either lower total spacecraft mass, or provide greater margin for design error in other components. Solar arrays and antennas in particular are often driven by launch vehicle volume constraints instead of mission needs. Deployable structures provide more on-orbit area for both solar arrays and antennas, while occupying less space during launch. These structures therefore, help address these constraints and have been proven as efficient solutions for many years. Tape springs are one example in this category of structures which offer greater …

Boundary Layer Measurements In The Trisonic Gas-Dynamics Facility Using Particle Image Velocimetry With Co₂ Seeding, Daniel B. Wolfe

Theses and Dissertations

Particle image velocimetry (PIV) is utilized with solid carbon dioxide (CO₂) seeding material to conduct boundary layer measurements in the test section of the Air Force Research Laboratory's Trisonic Gas-dynamics Facility (TGF), which has a 24 inch by 24 inch cross-section. Freestream velocity was set at Mach 0.3, Mach 0.5, or Mach 0.8 while stagnation pressure ranged from 500 to 2400 pounds per square foot (psf). High pressure liquid CO₂ was directed through expansion nozzles into shroud tubes which led to solidified particles in the wind tunnel stagnation chamber. Two different sets of shroud tubes were used …

Trajectory Control And Optimization For Responsive Spacecraft, Costantinos Zagaris

Theses and Dissertations

The concept of responsive space has been gaining interest, and growing to include systems that can be re-tasked to complete multiple missions within their lifetime. The purpose of this study is to develop an algorithm that produces a maneuver trajectory that will cause a spacecraft to arrive at a particular location within its orbit earlier than expected. The time difference, delta t, is used as a metric to quantify the effects of the maneuver. Two separate algorithms are developed. The first algorithm is an optimal control method and is developed through Optimal Control Theory. The second algorithm is a feedback …

Reynolds Number Effects On Thrust Coefficients And Piv For Flapping Wing Micro Air Vehicles, John P. Tekell

Theses and Dissertations

For the last several years the Air Force Institute of Technology (AFIT) has conducted research in aerodynamics for flapping wing micro air vehicles (MAVs). The focus of this research was to augment this effort by measuring thrust, velocity, and torque in tanks of water and glycerin using a scale and a reaction torque cell. The results for different flapping mechanisms are compared to a rotating propeller with the goal of elucidating the design trade space between rotorcraft and flapping wings at Reynolds numbers less than 100,000. In addition, flow visualization and quantitative velocity data were captured in the wake of …

Integration Of Cold Atom Interferometry Ins With Other Sensors, Aaron J. Canciani

Theses and Dissertations

Inertial navigation systems (INS) using cold-atom interferometry are currently under development, and sensors in these systems are expected to be several orders of magnitude more ccurate than current navigation grade sensors. This signi cant increase in accuracy motivates the need to explore how these high accuracy inertial navigation systems can be integrated with other sensors. This research focuses on methods of integrating cold atom interferometry INS with conventional navigation grade INS, as well as with GPS. Results from a full 6 degree of freedom simulation show that integrating CAI INS with navigation grade INS is a successful way to address …

Modeling, Simulation, And Flight Test For Automatic Flight Control Of The Condor Hybrid-Electric Remote Piloted Aircraft, Christopher Giacomo

Theses and Dissertations

This thesis describes the modeling and verification process for the stability and control analysis of the Condor hybrid-electric Remote-Piloted Aircraft (HE-RPA). Due to the high-aspect ratio, sailplane-like geometry of the aircraft, both longitudinal and lateral/directional aerodynamic moments and effects are investigated. The aircraft is modeled using both digital DATCOM as well as the JET5 Excel-based design tool. Static model data is used to create a detailed assessment of predictive flight characteristics and PID autopilot gains that are verified with autonomous flight test. PID gain values were determined using a six degree of freedom linear simulation with the Matlab/SIMULINK software. Flight …

Aircraft Course Optimization Tool Using Gpops Matlab Code, Ryan D. Gauntt

Theses and Dissertations

Aircraft course planning between two points in a clear, no threat environment is easy and straightforward. However, the addition of various threats can greatly increase the difficulty and complexity of course planning. Placing new waypoints along the edge of each threat, mostly skirting the dangerous environment, may not prove too difficult, but such courses are far from optimal. Given aircraft, environment, and time constraints it is likely a much more optimal path exists between any given start and end points. This research focuses on determining the feasibility of using the General Pseudospectral Optimization Software program files written for the MATLAB …

Plume Characterization Of Busek 600w Hall Thruster, Duc Minh Bui

Theses and Dissertations

The BHT-600W thruster has a high potential to place on various commercial and military satellites as a main propulsion system for orbit maintenance and orbit maneuvering. Therefore, the thruster's performance characteristics and parameters were evaluated for various operating conditions. These parameters include thrust, power consumption, mass flow rate, and efficiencies. Various plume properties were measured and characterized for the thruster to include exhaust beam profile and ion species distribution. The faraday probe was used to examine the thruster plume current density while the ion species fractions were determined by the ExB probe. The inverted pendulum thrust stand was also utilized …

Modeling Small Unmanned Aerial System Mishaps Using Logistics Regression And Artificial Neural Networks, Sean E. Wolf

Theses and Dissertations

A dataset of 854 small unmanned aerial system (SUAS) flight experiments from 2005-2009 is analyzed to determine significant factors that contribute to mishaps. The data from 29 airframes of different designs and technology readiness levels were aggregated. 20 measured parameters from each flight experiment are investigated, including wind speed, pilot experience, number of prior flights, pilot currency, etc. Outcomes of failures (loss of flight data) and damage (injury to airframe) are classified by logistic regression modeling and artificial neural network analysis. From the analysis, it can be concluded that SUAS damage is a random event that cannot be predicted with …

The Effect Of Elevated Temperature On The Inelastic Deformation Behavior Of Pmr-15 Solid Polymer, Chad E. C. Ryther

Theses and Dissertations

The inelastic deformation behavior of PMR-15 neat resin, a high-temperature thermoset polymer, was investigated at temperatures in the 274-316°C range. The experimental program was developed to explore the influence of temperature on tensile loading, relaxation and creep behaviors of PMR-15. The results demonstrate that the mechanical behavior of PMR-15 exhibits a strong dependence on temperature. During strain-controlled tensile loading, the slope of the stress-strain curve in the quasi-elastic region decreases and the flow stress level decreases with increasing temperature. During relaxation, the amount of the stress drop decreases with increasing temperature. Based on experimental results the Viscoplasticity Based on Overstress …

Link Performance Analysis For A Proposed Future Architecture Of The Air Force Satellite Control Network, Eric W. Nelson

Theses and Dissertations

The Air Force Satellite Control Network (AFSCN) is a worldwide network of ground stations that support a wide variety of users from the National Aeronautics and Space Administration (NASA) to the National Reconnaissance Office (NRO). The network performs tracking, telemetry, and commanding (TT&C) for these varied users. Users, located at Satellite Operations Centers (SOC), must compete for time on the AFSCN. This thesis demonstrates how to predict satellite link performance, specifically by users of the AFSCN. It will also demonstrate how users might use this capability to save spacecraft power. A tool was created called the AFSCN Link Predictor (LP) …

Development Of Photographic Dynamic Measurements Applicable To Evaluation Of Flapping Wing Micro Air Vehicles, Jeremy C. Murray

Theses and Dissertations

Developments in the area of flapping wing micro air vehicles (FWMAVs) of a small size and with limited range. This has lead to a great deal of interest in biomimetric designs based on flapping wing flyers, including the North American Hawkmoth (Manduca Sexta). By utilizing high speed photography and photogrammetry the dynamic flapping of the wing can be characterized for comparison with mathematical models, namely computational fluid dynamics (CFD) and finite element analysis (FEA).To successfully utilize high speed image capture, a method of successfully digitizing many data points in a short period of time needs to be developed. The effort …

The Use Of Various Failure Criteria As Applied To High Speed Wear, David A. Huber

Theses and Dissertations

This research has been aimed at developing methods to predict mechanical wear of sliding bodies at high velocities. Specifically, wear of test sled slippers at the Holloman High Speed Test Track at Holloman AFB, NM, is being considered. Developing a numerical model to represent the velocity range achieved at the test track is infeasible, so numerical modeling techniques must be adopted. Previous research has made use of finite element codes to simulate the high velocity sliding event. However, the extreme velocities at the test track can create numerical errors in the finite element codes. To avoid the numerical errors, an …

Coupled Radiation-Gasdynamic Solution Method For Hypersonic Shock Layers In Thermochemical Nonequilibrium, Christopher L. Martin Jr.

Theses and Dissertations

The purpose of this research was to develop a highly accurate computational method for calculating the nonequilibrium radiative heat transfer within reentry shock layers. The nonequilibrium state of the flowfield was solved using the multispecies multitemperature nonequilibrium flow solver NH7AIR which is capable of separately tracking the vibrational energy of each diatomic species and the energy of the free electrons. The calculation of radiative heat transfer was performed by utilizing the detailed line-by-line spectral radiation solver SPRADIAN. Two radiative transport schemes were implemented in this coupled code. The first scheme was the standard tangent slab solution method. The second scheme …

Scramjet Isolator Modeling And Control, John R. Hutzel

Theses and Dissertations

The scramjet isolator is a duct in which pressure increases from the inlet to the combustor via a shock train. The shock train leading edge (LE) location must be controlled in an operational scramjet. A LE location measurement algorithm, dynamic model, and control algorithm were developed and validated with 500 frame per second (FPS) shadowgraph images in this research. The test apparatus consisted of a direct connect cold-flow high-speed wind tunnel with an adjustable ramp mounted in the tunnel floor. Ramp adjustments changed the tunnel cross-sectional area which changed the tunnel back pressure and LE location. Wall-mounted pressure transducers and …

Design And Control Of Flapping Wing Micro Air Vehicles, Michael L. Anderson

Theses and Dissertations

Flapping wing Micro Air Vehicles (MAVs) continues to be a growing field, with ongoing research into unsteady, low Re aerodynamics, micro-fabrication, and fluid-structure interaction. However, research into flapping wing control of such MAVs continues to lag. Existing research uniformly consists of proposed control laws that are validated by computer simulations of quasi-steady blade-element formulae. Such simulations use numerous assumptions and cannot be trusted to fully describe the flow physics. Instead, such control laws must be validated on hardware. Here, a novel control technique is proposed called Bi-harmonic Amplitude and Bias Modulation (BABM) which can generate forces and moments in 5 …

Evaluation Of Nanocomposites For Shielding Electromagnetic Interference, Kenneth Y. Chong

Theses and Dissertations

Numerous efforts are ongoing to research and develop nanocomposite materials for space applications. Current composite spacecraft materials are nonconductive and require costly shielding materials to be applied in order to protect spacecraft from the harmful effects caused by electromagnetic interference (EMI), which is a by-product of exposure to the space environment. Conductive fillers (nanofibers) are being employed in composites to produce nanocomposites to reduce the dry weight of space vehicles while providing sufficient protection against EMI. This eliminates the need to apply secondary shielding materials to spacecraft. This thesis studied a nanocomposite consisting of Cycom 5575-2 glass with multi-walled carbon …

Two-Dimensional, Time-Dependent Plasma Structures Of A Hall Effect Thruster, David Liu

Theses and Dissertations

The Hall thruster is a type of electric propulsion utilized by satellites to perform a wide variety of missions ranging from station keeping, orbital maneuvers, and even deep space propulsion. In order to accommodate the multitude of missions it also has a wide assortment of sizes and power configurations which can range from approximately an inch in diameter at 20 W to a couple of feet in diameter at 1.5 kW. Additionally, this electro-static device provides high specific impulse without the added weight penalty associated with conventional chemical thrusters. It supplies this high specific impulse by ionizing a gas such …