Aerospace Engineering Commons^™

Composite Solid Rocket Motor Case Optimization With Matlab Genetic Algorithm, Aleksandr Breit

Master's Theses

This study utilizes MATLAB genetic algorithm (GA) to perform optimization on a solid rocket motor (SRM) chamber structure. The (SRM) structure is modelled as a cylindrical composite laminate where unidirectional fiber orientations are the primary design variable in the optimization problem formulation. Additional design variables such as chamber length, diameter, and internal pressure are altered along with the ply angles to minimize the safety margin towards a near-zero value and encourage efficient layup design. Classical lamination theory with Tsai-Wu failure criterion are used to calculate ply-level safety margins. A thickness minimization scheme is employed to reduce the ply count from …

Feasibility Assessment Of An All-Electric, Narrow-Body Airliner, Ariel Sampson

Master's Theses

Combustion emissions from aviation operations contribute significantly to climate change and air pollution. Accordingly, there is increasing interest in advancing battery-powered propulsion for aviation applications to reduce emissions. As batteries continue to improve, it is essential to recognize breakthroughs in battery specific energy in the context of air transport vehicles. Most electric aircraft designs and programs have focused on small aircraft because of restrictive battery performance. This work presents a feasibility assessment for an all-electric airliner based on an Airbus A220-100 with turbofan engines replaced by electric motors and propellers. The analysis compares the performance characteristics of the electric airliner …

Development Of Mirror Flexures For Use In The Muvi Instrument, Colin W. Harrop

Master's Theses

The Miniaturized Ultraviolet Imager (MUVI), is a compact wide field UV imaging instrument in development at UC Berkeley Space Sciences Laboratory and Cal Poly, San Luis Obispo. MUVI is designed to fit in a 2U CubeSat form factor and provide wide field, high resolution images of the ionosphere at far ultraviolet wavelengths. This thesis details the design and analyses of MUVI’s deployable cover mirror mounting flexures. Three different flexure geometries were evaluated, an optimal candidate was determined based on a number of criteria including isolation of vibration and stress to the mirrors, manufacturability and cost. The design of the flexure …

Project Management And Systems Engineering Framework For Educational Cubesat Missions, Bailey Garrett

Master's Theses

The rising complexity of CubeSat missions and the unique challenges faced by educational CubeSat programs lead to high rates of mission failure. Implementing project management and systems engineering practices can alleviate these challenges and improve mission success rates for educational CubeSat developers. However, existing project management and systems engineering resources are too cumbersome and often assume the student has a base-level understanding of project management and systems engineering fundamentals. A new universal project management and systems engineering framework was created and tailored specifically to the needs of an educational CubeSat mission. The framework was designed to accommodate first-time CubeSat developers, …

Effects Of Atomic Oxygen On Outgassing Of Silicone Materials, Samuel Westrick

Master's Theses

An important consideration for spacecraft material selection is the space environment that the spacecraft will be operating in. Two features of the space environment that drive material selection are material outgassing and the presence of atomic oxygen in low Earth orbit (LEO). Materials that are considered for use in space are tested to be able to understand how they’ll outgas on orbit and how they’ll respond to interactions with atomic oxygen. However, testing to understand how atomic oxygen interaction with a material will affect how the material will outgas is rare and not standardized. This thesis used a vacuum chamber …

Testing And Verification For The Open Source Release Of The Horizon Simulation Framewortesting And Verification For The Open Source Release Of The Horizon Simulation Framework, William J. Balfour

Master's Theses

Modeling and simulation tools are exceptionally useful for designing aerospace systems because they allow engineers to test and iterate designs before committing the massive resources required for system realization. The Horizon Simulation Framework (HSF) is a time-driven modeling and simulation tool which attempts to optimize how a modeled system could perform a mission profile. After 15 years of development, the HSF team aims to achieve a wider user and developer base by releasing the software open source. To ensure a successful release, the software required extensive testing, and the main scheduling algorithm required protections against new code breaking old functionality. …

A Study Of Pressure Probe Response In Steady And Unsteady Flows, Michael T. Charonnat

Master's Theses

The objective of this thesis is two-fold: to analyze the directional calibration of a 3-hole probe in steady flow and to develop a method for the interpretation of measurements recorded with a novel, fast-response Pitot-type probe in unsteady, turbulent flow. Calibration data for the 3-hole probe’s two side ports was taken in the steady, non-turbulent region of a free jet and was evaluated for symmetry. In addition, data that was recorded using one side port in two independent calibration runs was compared to study repeatability. Misalignment was found between the nominally symmetric data sets, which may be the result of …

Development Of A Dual-Band Radio Repeater To Be Carried By A Fixed-Wing Small Unmanned Aerial System, Carl Recine

Master's Theses

With the continued rise in wildfires in California, and around the world, technological advancements are needed to improve the safety and effectiveness of wildland firefighters. One area that provides an opportunity for such development is the deployment of temporary communications networks. Currently, radio repeaters are set up on mountain tops in the response area; such repeaters do not provide flexibility once installed, still have blind spots, and require the time of valuable assets like helicopters to install.

This thesis will establish the feasibility of airborne radio repeaters for wildland firefighting. In order to successfully demonstrate the feasibility of such an …

Structural Loads And Preliminary Structural Design For A World Speed Record-Breaking Turbo-Prop Racing Airplane, Matthew G. Slymen

Master's Theses

The Cal Poly SLO Turbo-Prop Racer project aims to design a world speed record-breaking aircraft, capable of flying more than 550 miles per hour on a 3-kilometer closed course. To further this endeavor, this thesis presents the calculations of load distributions across the aircraft’s wing and tail and preliminary structural estimates of primary structural components for verification of the loads calculations and for use in a future finite element model. The aircraft’s fundamental design characteristics effect on the structure of the aircraft, namely the unique Y-tail design, are first examined. Then, loads are calculated in accordance with the regulation dictated …

Spacecraft Trajectory Optimization Suite: Fly-Bys With Impulsive Thrust Engines (Stops-Flite), Aaron H. Li

Master's Theses

Spacecraft trajectory optimization is a near-infinite problem space with a wide variety of models and optimizers. As trajectory complexity increases, so too must the capabilities of modern optimizers. Common objective cost functions for these optimizers include the propellant utilized by the spacecraft and the time the spacecraft spends in flight. One effective method of minimizing these costs is the utilization of one or multiple gravity assists. Due to the phenomenon known as the Oberth effect, fuel burned at a high velocity results in a larger change in orbital energy than fuel burned at a low velocity. Since a spacecraft is …

The Effects Of Atomic Oxygen On Silicone And Carbon-Based Contamination, Mayana W. Gordon

Master's Theses

Understanding the space environment and contamination concerns of a spacecraft is critical in designing a successful mission. The ability for a spacecraft to meet its science objectives relies on systems functioning as intended. A concern for maintain- ing performance while on orbit is molecular contamination. Silicones have previously been shown to form a silica layer on their surfaces when exposed to atomic oxygen. For silicone contamination, this translates to a silica film on the contaminated surface. Missions such as Long Duration Exposure Facility and Evaluation of Oxygen Interactions with Materials III have indicated that the silica film can trap deposits …

Method And Simulation Of On-Orbit Sub-Microthrust Evaluation, Jonathan Hood

Master's Theses

With the advent of smaller satellites, along with the need for less than 0.1 μN precision attitude control for interferometry and imaging missions, finer micro- to sub-micro- thrusters have become an area of high interest. As thrusters are developed and ground-tested, it is necessary to evaluate their thrust performance on-orbit. On-orbit measurements offer actual thrust performance in mission conditions, free from ground facility vibrations and miniaturization restraints, and allow a thruster system to achieve a NASA Technology Readiness Level (TRL) of 7-8. A review is conducted of existing and proposed ground and on-orbit thrust measurement techniques. Experimental gaps and complementary …

Low-Cost Uav Swarm For Real-Time Object Detection Applications, Joel Valdovinos Miranda

Master's Theses

With unmanned aerial vehicles (UAVs), also known as drones, becoming readily available and affordable, applications for these devices have grown immensely. One type of application is the use of drones to fly over large areas and detect desired entities. For example, a swarm of drones could detect marine creatures near the surface of the ocean and provide users the location and type of animal found. However, even with the reduction in cost of drone technology, such applications result costly due to the use of custom hardware with built-in advanced capabilities. Therefore, the focus of this thesis is to compile an …

Aeroelastic Analysis Of Small-Scale Aircraft, Kent Roberts

Master's Theses

The structural design of flight vehicles is a balancing act between maximizing loading capability while minimizing weight. An engineer must consider not only the classical static structural yielding failure of a vehicle, but a variety of ways in which structural deformations can in turn, affect the loading conditions driving those deformations. Lift redistribution, divergence, and flutter are exactly such dynamic aeroelastic phenomena that must be properly characterized during the design of a vehicle; to do otherwise is to risk catastrophe. Relevant within the university context is the design of small-scale aircraft for student projects and of particular consideration, the DBF …

Characterization, Design, And Optimization Of Dual-Purpose Wind Turbines And Frost Protection Fans, Ethan Narad

Master's Theses

This thesis report outlines the creation of a MATLAB tool to design reversible machines that can function as both wind turbines and as agricultural frost protection fans. Frost protection fans are used to prevent crop loss during radiative freeze events during which a temperature inversion is present. Such a dual-purpose machine fundamentally has the constraint that it must use symmetric airfoils, so a suite of tools for automatically designing an optimized wind turbine blade with symmetric airfoils using the Blade Element Momentum (BEM) theory approach is presented. The BEM code is then re-derived and adapted for use with a frost …

Developing A Light Curve Simulation Tool For Ground And Space-Based Observations Of Spacecraft And Debris, Andrew T. Ochoa

Master's Theses

A light curve is a plot of brightness versus time of an object. Light curves are dependent on orbit, attitude, surface area, size, and shape of the observed object. Using light curve data, several analysis methods have been developed to derive these parameters. These parameters can be used for tracking orbital debris, monitoring satellite health, and determining the mission of an unknown spacecraft.

This paper discusses the development, verification, and utilization of a tool that simulates light curve data. This tool models ground-based observations, space-based observations, self-shadowing geometry, tumbling debris, and controlled spacecraft. The main output from the tool is …

On The Mobility Of Small Aperture Telescopes For Initial Orbit Determination And Apparent Magnitude Derivation Of Low Earth Satellites, Jonathan Ian Hernandez

Master's Theses

Maintaining Space Domain Awareness (SDA) of satellites in low Earth orbit (LEO) requires effective methods of tracking and characterization. Optical measurements of these objects are generally sparse due to limited access intervals and high angular rates. Light pollution and geographic obstructions may also preclude consistent observations. However, a mobile small aperture telescope grants the ability to minimize such environmental effects, thereby increasing capture likelihoods for objects within this regime. By enhancing LEO satellite visibility in this way, extensive orbital and visual data are obtainable.

An 8-inch Meade LX200GPS telescope equipped with a Lumenera SKYnyx2-0M CCD camera comprises the system that …

Optimization Of Interplanetary Transfer Trajectories Using The Invariant Manifolds Of Halo Orbits, Ryan Yedinak

Master's Theses

Traditionally, two-body dynamics have been used to design orbital trajectories for interplanetary missions using a series of Lambert’s transfers and gravity assists. Although these are reliable methods, they have extremely high fuel requirements, especially for missions to outer planets. From an orbital mechanics perspective, three ways of reducing fuel requirements for these types of missions are utilizing low energy transfer trajectories, applying low thrust engine parameters, and implementing orbit optimization techniques.

The goal of this thesis is to combine low energy transfers created from the dynamics of the Circular Restricted Three-Body Problem (CRTBP) with low-thrust orbit optimization techniques to develop …

Interior Point Optimization Of Low-Thrust Spacecraft Trajectories, Jordan D. Frederiksen

Master's Theses

Low-thrust interplanetary spacecraft trajectory optimization poses a uniquely difficult problem to solve because of the inherent nonlinearities of the dynamics and constraints as well as the large size of the search space of possible solutions. Tools currently exist that optimize low-thrust interplanetary trajectories, but these tools are rarely openly available to the public, and when they are available they require multiple interfaces between multiple different packages. The goal of this work is to present a new piece of low-thrust interplanetary spacecraft trajectory optimization software that is open-source and entirely self-contained so that more people can have access to the ability …

Integral Boundary Layer Methods In Python, Malachi Joseph Edland

Master's Theses

This thesis presents a modern approach to two Integral Boundary Layer methods implemented in the Python programming language. This work is based on two 2D boundary layer methods: Thwaites' method for laminar boundary layer flows and Head's method for turbulent boundary layer flows. Several novel enhancements improve the quality and usability of the results. These improvements include: a common ordinary differential equation (ODE) integration framework that generalizes computational implementations of Integral Boundary Layer methods; the use of a dense output Runge-Kutta ODE solver that allows for querying of simulation results at any point with accuracy to the same order as …

Analytical, Numerical, And Computational Methods To Analyze The Time To Empty Open, Closed, And Variable-Topped Inverted Bottles, Callen Schwefler

Master's Theses

Recent unexpected experimental observations of the emptying of inverted bottles with perforations has generated interest in modeling and simulation of this phenomenon. It was observed that as a perforation, i.e., a small hole at the "top" of the inverted bottle, is added and enlarged, the overall emptying time first increases to a maximum value and then decreases until it reaches a lower limit. The change in emptying time is associated with a transition from jetting, where only water exits the neck, to glugging, a competition between air and water flows at the neck of the bottle.

This paper develops analytical …

A Flat Plate Skin Friction Correlation Including Transition, Jaret M. Wedow

Master's Theses

Many existing boundary layer models treat transition as a rapid switch from laminar to turbulent flow, with correlations defining properties in each respective region. Natural transition, however, is not always a very spanwise uniform process, with the onset of transition varying somewhat between different streamwise paths of fluid flow. Thus, a spanwise average of natural transition can result in a more gradual, extended transition region than many existing models predict. Modern applications, such as aircraft wings and fuselages, are extremely streamlined and smooth, allowing for natural transition to occur rather than flow tripping to turbulent near the leading edge. Under …

Development Of A Cubesat Conceptual Design Tool And Implementation Of The Eps Design Module, Sean K. Nogrady

Master's Theses

This thesis is the product of an effort to develop a CubeSat Conceptual Design Tool for the California Polytechnic State University CubeSat Laboratory. Such a tool is necessary due to inefficiencies with the current conceptual design process. It is being developed to increase accessibility, reduce design time, and promote good systems engineering within CubeSat development.

The development of the architecture of a conceptual design tool, the core user-interface element, and the completion of a module for the electrical power subsystem is the focus of this thesis. The architecture is built around different modules to design different subsystems that work in …

Cultivating Creativity In Aerospace Systems Engineering To Manage Complexity, Kenneth Lucas Dodd

Master's Theses

In recent decades, complexity in aerospace programs has been increasing, leading to large budget and schedule overruns. Many of the risks of complex system development can be attributed to the inadequacy of linear methods when applied to nonlinear domains, i.e., oversimplification in a program amplifies the amount of risk produced when a system behaves unexpectedly. Effectively managing complexity involves responding to the various sources of complexity, whether it appears in the objective behavior of the system itself or in the subjective behavior of the people developing it. Thus, the engineering of complex systems requires nonlinear modeling methods of the system …

Simulation Of A Configurable Hybrid Aircraft, Brandon Bartlett

Master's Theses

As the demand for air transportation is projected to increase, the environmental impacts produced by air travel will also increase. In order to counter the environmental impacts while also meeting the demand for air travel, there are goals and research initiatives that aim to develop more efficient aircraft. An emerging technology that supports these goals is the application of hybrid propulsion to aircraft, but there is a challenge in effectively exploring the performance of hybrid aircraft due to the time and money required for safe flight testing and due to the diverse design space of hybrid architectures and components. Therefore, …

Passive Disposal Of Launch Vehicle Stages In Geostationary Transfer Orbits Leveraging Small Satellite Technologies, Marc Alexander Galles

Master's Theses

Once a satellite has completed its operational period, it must be removed responsibly in order to reduce the risk of impacting other missions. Geostationary Transfer Orbits (GTOs) offer unique challenges when considering disposal of spacecraft, as high eccentricity and orbital energy give rise to unique challenges for spacecraft designers. By leveraging small satellite research and integration techniques, a deployable drag sail module was analyzed that can shorten the expected orbit time of launch vehicle stages in GTO. A tool was developed to efficiently model spacecraft trajectories over long periods of time, which allowed for analysis of an object’s expected lifetime …

Soarnet, Deep Learning Thermal Detection For Free Flight, Jake T. Tallman

Master's Theses

Thermals are regions of rising hot air formed on the ground through the warming of the surface by the sun. Thermals are commonly used by birds and glider pilots to extend flight duration, increase cross-country distance, and conserve energy. This kind of powerless flight using natural sources of lift is called soaring. Once a thermal is encountered, the pilot flies in circles to keep within the thermal, so gaining altitude before flying off to the next thermal and towards the destination. A single thermal can net a pilot thousands of feet of elevation gain, however estimating thermal locations is not …

Prediction Of In-Plane Stiffnesses And Thermomechanical Stresses In Cylindrical Composite Cross-Sections, Bryson M. Chan

Master's Theses

Accurate mechanical analysis of composite structures is necessary for the prediction of laminate behavior. Cylindrical composite tubes are a mainstay in many structural applications. The fundamental design of circular composite cross-sections necessitates the development of a comprehensive composite lamination theory. A new analytical method is developed to characterize the behavior of thin-walled composite cylindrical tubes using a modified plate theory. A generated numerical solver can predict properties such as axial stiffness, bending stiffness, layer stresses, and layer strains in composite tubes subjected to combined mechanical loading and thermal effects. The model accounts for the curvature by transforming and translating the …

Comparing Radiation Shielding Potential Of Liquid Propellants To Water For Application In Space, John Czaplewski

Master's Theses

The radiation environment in space is a threat that engineers and astronauts need to mitigate as exploration into the solar system expands. Passive shielding involves placing as much material between critical components and the radiation environment as possible. However, with mass and size budgets, it is important to select efficient materials to provide shielding. Currently, NASA and other space agencies plan on using water as a shield against radiation since it is already necessary for human missions. Water has been tested thoroughly and has been proven to be effective. Liquid propellants are needed for every mission and also share similar …

A Method For Visualizing The Structural Complexity Of Organizational Architectures, Jacob Michael B. King

Master's Theses

To achieve a high level of performance and efficiency, contemporary aerospace systems must become increasingly complex. While complexity management traditionally focuses on a product’s components and their interconnectedness, organizational representation in complexity analysis is just as essential. This thesis addresses this organizational aspect of complexity through an Organizational Complexity Metric (OCM) to aid complexity management. The OCM augments Sinha’s structural complexity metric for product architectures into a metric that can be applied to organizations. Utilizing nested numerical design structure matrices (DSMs), a compact visual representation of organizational complexity was developed. Within the nested numerical DSM are existing organizational datasets used …