Aerospace Engineering Commons^™

Picasso Interface For Horizon Simulation Framework, Brian E. Kirkpatrick

Master's Theses

The Horizon Simulation Framework, or HSF, is a modeling and simulation framework compiled from C/C++ source code into a command line program. Picasso is an interface designed to control the input files to Horizon by providing visual tools to create and manipulate the XML files used to define an HSF system of assets, their environment, and other simulation parameters. Picasso also supports the visualization of Horizon output in several different forms, and import mechanics from online space object catalogues.

Implementation Of A Conrad Probe On A Boundary Layer Measurement System, Charles Rocky Ulk

Master's Theses

This thesis presents the design, calibration, and performance evaluation of a type of two-hole pressure probe anemometer known as a Conrad probe, as well as its subsequent implementation on an autonomous, compact boundary layer measurement device and its first application for subsonic in-flight measurements of a swept wing boundary layer. Calibration of the Conrad probe was accomplished using two calibration functions and a non-nulling method for resolving in-plane flow velocity direction and magnitude over a range of ±30 degrees. This approach to calibration and application offered the advantages of rapid data acquisition with lower energy consumption than alternative methods for …

A Three Dimensional Vortex Particle-Panel Code For Modeling Propeller-Airframe Interaction, Jacob S. Calabretta

Master's Theses

Analysis of the aerodynamic effects of a propeller flowfield on bodies downstream of the propeller is a complex task. These interaction effects can have serious repercussions for many aspects of the vehicle, including drag changes resulting in larger power requirements, stability changes resulting in adjustments to stabilizer sizing, and lift changes requiring wing planform adjustments.

Historically it has been difficult to accurately account for these effects at any stage during the design process. More recently methods using Euler solvers have been developed that capture interference effects well, although they don't provide an ideal tool for early stages of aircraft design, …

Applied System Identification For A Four Wheel Reaction Wheel Platform, Seth F. Silva

Master's Theses

Applied System Identification for a Four Wheel Reaction Wheel Platform

By

Seth Franklyn Silva

At the California Polytechnic State University, San Luis Obispo there is a four-wheel reaction wheel pyramidal simulator platform supported by an air-bearing. This simulator has the current capability to measure the wheel speeds and angular velocity of the platform, and with these measurements, the system identification process was used to obtain the mass properties of this simulator. A handling algorithm was developed to allow wireless data acquisition and command to the spacecraft simulator from a “ground” computer allowing the simulator to be free of induced torques …

Development Of A Meshless Method To Solve Compressible Potential Flows, Alejandro Ramos

Master's Theses

The utility of computational fluid dynamics (CFD) for solving problems of engineering interest has experienced rapid growth due to the improvements in both memory capacity and processing speed of computers. While the capability now exists for the solution of the Navier-Stokes equations about complex and complete aircraft configurations, the bottleneck within the process is the time consuming task of properly generating a mesh that can accurately solve the governing partial differential equations (PDEs). This thesis explored two numerical techniques that attempt to circumvent the difficulty associated with the meshing process by solving a simplified form of the continuity equation within …

Numerical Examination Of Flow Field Characteristics And Fabri Choking Of 2d Supersonic Ejectors, Brett G. Morham

Master's Theses

An automated computer simulation of the two-dimensional planar Cal Poly Supersonic Ejector test rig is developed. The purpose of the simulation is to identify the operating conditions which produce the saturated, Fabri choke and Fabri block aerodynamic flow patterns. The effect of primary to secondary stagnation pressure ratio on the efficiency of the ejector operation is measured using the entrainment ratio which is the secondary to primary mass flow ratio.

The primary flow of the ejector is supersonic and the secondary (entrained) stream enters the ejector at various velocities at or below Mach 1. The primary and secondary streams are …

Novel Inverse Airfoil Design Utilizing Parametric Equations, Kevin A. Lane

Master's Theses

The engineering problem of airfoil design has been of great theoretical interest for almost a century and has led to hundreds of papers written and dozens of methods developed over the years. This interest stems from the practical implications of airfoil design. Airfoil selection significantly influences the application's aerodynamic performance. Tailoring an airfoil profile to its specific application can have great performance advantages. This includes considerations of the lift and drag characteristics, pitching moment, volume for fuel and structure, maximum lift coefficient, stall characteristics, as well as off-design performance.

A common way to think about airfoil design is optimization, the …

Assessing The V2-F Turbulence Models For Circulation Control Applications, Travis M. Storm

Master's Theses

In recent years, airports have experienced increasing airport congestion, partially due to the hub-and-spoke model on which airline operations are based. Current airline operations utilize large airports, focusing traffic to a small number of airports. One way to relieve such congestion is to transition to a more accessible and efficient point-to-point operation, which utilizes a large web of smaller airports. This expansion to regional airports propagates the need for next-generation low-noise aircraft with short take-off and landing capabilities. NASA has attacked this problem with a high-lift, low-noise concept dubbed the Cruise Efficient Short Take-Off and Landing (CESTOL) aircraft. The goal …

High Order Finite Elements For Lagrangian Computational Fluid Dynamics, Truman Everett Ellis

Master's Theses

A general finite element method is presented to solve the Euler equations in a Lagrangian reference frame. This FEM framework allows for separate arbitrarily high order representation of kinematic and thermodynamic variables. An accompanying hydrodynamics code written in Matlab is presented as a test-bed to experiment with various basis function choices. A wide range of basis function pairs are postulated and a few choices are developed further, including the bi-quadratic Q2-Q1d and Q2-Q2d elements. These are compared with a corresponding pair of low order bi-linear elements, traditional Q1-Q0 and sub-zonal pressure Q1-Q1d. Several test problems are considered including static convergence …

Quantifying Seismic Risk For Portable Ground Support Equipment At Vandenberg Air Force Base, Joshua Brian Lowe

Master's Theses

This project develops a quantitative method to evaluate the seismic risk for portable GSE at Vandenberg Air Force Base. Using the latest probability data available from the USGS, risk thresholds are defined for portable GSE having the potential to cause a catastrophic event. Additionally, an example tool for design engineers was developed from the seismic codes showing the tipping hazard case can be simplified into strict geometrical terms. The misinterpretation and confusion regarding the Range Safety 24 Hour Rule exemption can be avoided by assessing seismic risk for portable GSE. By using the methods herein to quantify and understand seismic …

Autonomous Satellite Operations For Cubesat Satellites, Jason Lionel Anderson

Master's Theses

In the world of educational satellites, student teams manually conduct operations daily, sending commands and collecting downlinked data. Educational satellites typically travel in a Low Earth Orbit allowing line of sight communication for approximately thirty minutes each day. This is manageable for student teams as the required manpower is minimal. The international Global Educational Network for Satellite Operations (GENSO), however, promises satellite contact upwards of sixteen hours per day by connecting earth stations all over the world through the Internet. This dramatic increase in satellite communication time is unreasonable for student teams to conduct manual operations and alternatives must be …

System Integration And Attitude Control Of A Low-Cost Spacecraft Attitude Dynamics Simulator, Ryan L. Kinnett

Master's Theses

The CalPoly Spacecraft Attitude Dynamics Simulator mimics the rotational dynamics of a spacecraft in orbit and acts as a testbed for spacecraft attitude control system development and demonstration. Prior to this thesis, the simulator platform and several subsystems had been designed and manufactured, but the total simulator system was not yet capable of closed-loop attitude control. Previous attempts to make the system controllable were primarily mired by data transport performance. Rather than exporting data to an external command computer, the strategy implemented in this thesis relies on a compact computer onboard the simulator platform to handle both attitude control processing …

Adaptive Control Applied To The Cal Poly Spacecraft Attitude Dynamics Simulator, Matthew C. Downs

Master's Theses

The goal of this thesis is to use the Cal Poly Spacecraft Attitude Dynamics Simulator to provide proof of concept of two adaptive control theories developed by former Cal Poly students: Nonlinear Direct Model Reference Adaptive Control and Adaptive Output Feedback Control. The Spacecraft Attitude Dynamics Simulator is a student-built air bearing spacecraft simulator controlled by four reaction wheels in a pyramidal arrangement. Tests were performed to determine the effectiveness of the two adaptive control theories under nominal operating conditions, a “plug-and-play” spacecraft scenario, and under simulated actuator damage. Proof of concept of the adaptive control theories applied to attitude …

Control Law Design And Validation For A Helicopter In-Flight Simulator, Brian T. Fujizawa

Master's Theses

In-flight simulation allows one aircraft to simulate the dynamic response of another aircraft. A control system designed to give RASCAL, a JUH-60A Black Hawk helicopter based at Moffett Field, CA, in-flight simulation capabilities has been designed, optimized and validated in this research. A classical explicit model following control system with a frequency dependent feedback controller was used. The frequency dependent controller allows model following of the attitude in the short term and the velocity in the long term. Controller gains were optimized using a high order, linearized model of UH-60 dynamics. Non-linear simulations of the control laws were performed, first …

Effects Of Delamination On Composite Sandwich Structures Under Static And Fatigue Loading, Eugene Everett Eswonia

Master's Theses

This thesis will present the experimental and numerical analysis of composite sandwich structures under monotonic and fatigue loading. The sandwich skins were made of fiberglass and the core used was a closed cell PVC foam. Initial delaminations were introduced into the sandwich structures during manufacturing to see the effect of delamination size on the ultimate strength and monotonic fracture. Fiberglass rods, called shear keys, added to the foam core to determine whether or not they increased the strength of the test specimens. Furthermore, shear key locations were also varied and their effects noted. The fixed rate static behavior for all …

Aerodynamic Performance Enhancement Of A Naca 66–206 Airfoil Using Supersonic Channel Airfoil Design, David Michael Giles

Master's Theses

Supersonic channel airfoil design techniques have been shown to significantly reduce drag in high-speed flows over diamond shaped airfoils by Ruffin and colleagues. The effect of applying these techniques to a NACA 66-206 airfoil is presented. The design domain entails channel heights of 8-16.6% thickness-to-chord and speeds from Mach 1.5-3.0. Numerical simulations show an increase in the lift-to-drag ratio for airfoils at Mach 2.5 at a 35,000-ft altitude with a 12% channel height geometry showing a benefit of 17.2% at 6-deg angle of attack and a sharp channel leading edge. Wave drag is significantly reduced while viscous forces are slightly …

Orbital Propagators For Horizon Simulation Framework, Mitra Farahmand

Master's Theses

This thesis describes the models of four common orbital propagators and outlines the process of integrating them into the Horizon Simulation Framework (HSF). The results of the Two-Body, J2, and J4 propagators from the HSF are then compared against the outcomes of these propagators in MATLAB and Satellite Toolkit (STK). The MATLAB algorithms verify the functionality of the propagators and determine the accuracy of the HSF implementation. The compassion against STK validates the formulation of the HSF propagators. In order to equip the HSF with a more precise means of orbit determination, adding the Simplified General Perturbations 4 (SGP4) propagator …

Rayleigh Flow Of Two-Phase Nitrous Oxide As A Hybrid Rocket Nozzle Coolant, Lauren May Nelson

Master's Theses

The Mechanical Engineering Department at California Polytechnic State University in San Luis Obispo currently maintains a lab-scale hybrid rocket motor for which nitrous oxide is utilized as the oxidizer in the combustion system. Because of its availability, the same two-phase (gas and liquid) nitrous oxide that is used in the combustion system is also routed around the throat of the hybrid rocket’s converging-diverging nozzle as a coolant. While this coolant system has proven effective empirically in previous tests, the physics behind the flow of the two-phase mixture is largely unexplained. This thesis provides a method for predicting some of its …

The Interaction Between Throttling And Thrust Vectoring Of An Annular Aerospike Nozzle, David Michael Imbaratto

Master's Theses

Applied research and testing has been conducted at the Cal Poly San Luis Obispo High-pressure Blow-Down facility to study the affects of throttling in a thrust-vectored aerospike nozzle. This study supports the ongoing research at Cal Poly to effectively thrust vector a hybrid rocket motor. Such thrust vectoring is achieved by small secondary ports in the nozzle body that are perpendicular to the main nozzle. The testing conducted included characterizing and comparing the performance of a straight aerospike nozzle to that of a thrust-vectored aerospike nozzle. Throttling effects on the aerospike nozzle in an unvectored and in a vectored configuration …

Development Of A High Performance Micropropulsion System For Cubesats, Christopher Lorian Biddy

Master's Theses

Picosatellites are defined as satellites with a mass between 0.1 and 1kg (Miniaturized satellite). Picosatellites are typically designed to work together or function in formations (Miniaturized satellite). A specific type of Picosatellite known as CubeSats were introduced in 1999 and since then have increased in popularity so that there are now over 80 CubeSat programs around the world. CubeSats are defined as cubic units 10cm on each side and no more than 1kg in mass. CubeSats are required to conform to the CubeSat Standard created by California Polytechnic State University and Stanford University and be compatible with Cal Poly’s P-POD …

On-Board Orbit Determination And 3-Axis Attitude Determination For Picosatellite Applications, John Arthur Bowen

Master's Theses

This thesis outlines an orbit determination and 3-axis attitude determination system for use on orbit as applicable to 1U CubeSats and other picosatellites. The constraints imposed by the CubeSat form factor led to the need for a simple configuration and relaxed accuracy requirements. To design a system within the tight mass, volume, and power constraints inherent to CubeSats, a balance between hardware complexity, software complexity and accuracy is sought. The proposed solution consists of a simple orbit propagator, magnetometers with a magnetic field look-up table, Sun sensors with an analytic Sun direction model, and the TRIAD method to combine vector …

Store And Forward Routing For Sparse Pico-Satellite Sensor Networks With Data-Mules, Trevor Joseph Koritza

Master's Theses

Satellites are playing an increasingly important role in collecting scientific information, providing communication services, and revolutionizing navigation. Until recently satellites were large and very expensive, creating a high barrier to entry that only large corporations and government agencies could overcome. In the past few years the CubeSat project at California Polytechnic University in San Luis Obispo (Cal Poly) has worked to refine the design and launching of small, lightweight, and less expensive satellites called pico-satellites, opening space up to a wider audience. Now that Cal Poly has the launch logistics and hardware under control, a new problem has arisen. These …

Attitude Determination Of A Student Satellite Using On-Orbit Magnetometer And Temperature Data, Jacob Daniel Dimiceli

Master's Theses

An extended Kalman filter is modified to support only magnetometer data as a measurement for spacecraft attitude information. Actual on-orbit data from a student satellite is used in the filter from three different time periods and varying data frequencies. The extended Kalman filter has a thermal model that utilizes external temperature data as a verification tool for filter convergence and for parameter tuning. It can capture the frequency of temperature changes and the correct side panel being lit by the sun as long as the filter converges properly, but not the magnitude of the temperature at a specific time. A …

Multidisciplinary Design Optimization Of An Extreme Aspect Ratio Hale Uav, Bryan J. Morrisey

Master's Theses

ABSTRACT

Multidisciplinary Design Optimization of an Extreme Aspect Ratio HALE UAV

Bryan J. Morrisey

Development of High Altitude Long Endurance (HALE) aircraft systems is part of a vision for a low cost communications/surveillance capability. Applications of a multi payload aircraft operating for extended periods at stratospheric altitudes span military and civil genres and support battlefield operations, communications, atmospheric or agricultural monitoring, surveillance, and other disciplines that may currently require satellite-based infrastructure. Presently, several development efforts are underway in this field, including a project sponsored by DARPA that aims at producing an aircraft that can sustain flight for multiple years and …

Development Of An Integrated Gaussian Process Metamodeling Application For Engineering Design, Collin R. Baukol

Master's Theses

As engineering technologies continue to grow and improve, the complexities in the engineering models which utilize these technologies also increase. This seemingly endless cycle of increased computational power and demand has sparked the need to create representative models, or metamodels, which accurately reflect these complex design spaces in a computationally efficient manner. As research into metamodeling and using advanced metamodeling techniques continues, it is important to remember design engineers who need to use these advancements. Even experienced engineers may not be well versed in the material and mathematical background that is currently required to generate and fully comprehend advanced complex …

An Investigation Of E-Glass Structure With Different Filler Material Under Vibration And Bending Loading, John R. Parra

Master's Theses

Although fiberglass reinforced polyester manholes and wetwalls have been proven by the American Society for Testing Materials (ASTM) and are currently being used in some parts of the world, there still exists a lack of investigation for testing manhole covers made with different inorganic fillers under static and dynamic behavior. The filler would not only improve the mechanical properties of fiber-reinforced polymer matrix composite not otherwise achieved by the resin ingredients alone but also lower the overall manufacturing costs by decreasing the amount of fiber content without adversely affecting the composite’s mechanical properties. The main objective involved the development of …

A Flight Simulation Study Of The Simultaneous Non-Interfering Aircraft Approach, Brian H. Reel

Master's Theses

Using a new implementation of a NASA flight simulation of the Quiet Short-Haul Research Aircraft, autopilots were designed to be capable of flying both straight in (ILS) approaches, and circling (SNI) approaches. A standard glideslope coupler was sufficient for most conditions, but a standard Proportional-Integral-Derivative (PID) based localizer tracker was not sufficient for maintaining a lateral track on the SNI course. To track the SNI course, a feed-forward system, using GPS steering provided much better results.

NASA and the FAA embrace the concept of a Simultaneous, Non-Interfering (SNI) approach as a way to increase airport throughput while reducing the noise …

An Experiment On Integrated Thermal Management Using Metallic Foam, Derek M. Geiger

Master's Theses

This report details an approach to using metal foam heat exchangers inside an integrated thermal management system on a variable cycle engine. The propulsion system of interest is a variable cycle engine with an auxiliary, variable flow rate fan. The feasibility of utilizing an open-celled metallic foam heat exchanger in the ducting between the constant and variable-fans on this variable cycle engine to cool the avionics was explored using an experimental approach. Two heat exchangers, 6.3 inch width by 6.3 inch length by 0.5 inch thickness, were constructed from 20 and 40 pores per inch (PPI) metal foam and tested. …

Validation Of Linearized Flight Models Using Automated System-Identification, Keith Eric Rothman

Master's Theses

Optimization based flight control design tools depend on automatic linearization tools, such as Simulink®’s LINMOD, to extract linear models. In order to ensure the usefulness and correctness of the generated linear model, this linearization must be accurate. So a method of independently verifying the linearized model is needed. This thesis covers the automation of a system identification tool, CIFER®, for use as a verification tool integrated with CONDUIT®, an optimization based design tool. Several test cases are built up to demonstrate the accuracy of the verification tool with respect to analytical results and matches with LINMOD. Several common nonlinearities are …

Design And Control Considerations For A Skid-To-Turn Unmanned Aerial Vehicle, Tanner Austin Sims

Master's Theses

The use of Unmanned Aerial Vehicles (UAVs) are rapidly expanding and taking on new roles in the military. In the area of training and targeting vehicles, control systems are expanding the functionality of UAVs beyond their initially designed purpose. Aeromech Engineering’s NXT UAV is a high speed target drone that is intended to simulate a small aircraft threat. However, in the interest of increasing functionality, enabling NXT to accomplish wings level skidding turns provides the basis for a UAV that can simulate a threat from a missile. Research was conducted to investigate the aerodynamic and performance characteristics of a winged …