Aerospace Engineering Commons^™

Invited Article: Data Analysis Of The Floating Potential Measurement Unit Aboard The International Space Station, Aroh Barjatya, Charles M. Swenson, Donald C. Thompson, Kenneth H. Wright

Publications

We present data from the Floating Potential Measurement Unit (FPMU) that is deployed on the starboard truss of the International Space Station. The FPMU is a suite of instruments capable of redundant measurements of various plasma parameters. The instrument suite consists of a floating potential probe, a wide-sweeping spherical Langmuir probe, a narrow-sweeping cylindrical Langmuir probe, and a plasma impedance probe. This paper gives a brief overview of the instrumentation and the received data quality, and then presents the algorithm used to reduce I-V curves to plasma parameters. Several hours of data are presented from August 5, 2006 and March …

Modular Multi-Stage Axial Compressor Design, Christopher S. Hemerly

Master's Theses - Daytona Beach

Increasingly, companies are becoming more interested in reducing cost. Recent studies indicate that up to 80% of the Lifecycle costs (LCC) has been embedded in the engine's DNA at the end of the development and design phase. One concept to aid in the cost reduction is the modular design of expensive and development-intensive components, such as multi-stage axial compressors. It is the objective of this approach to utilize a "core" module in all the compressors, thus maximizing commonality and minimizing all relevant development, design, manufacture, procurement, and service costs; these reductions in cost are projected to increase affordability by five-fold. …

Numerical Simulation Of Uva Ramjet/Scramjet Hypersonic Engine With Hydrogen-Air Combustion Using Wind-Us, Vishal Anand Bhagwandin

Master's Theses - Daytona Beach

The internal flowpath of University of Virginia's Mach 5, direct-connect, dual-mode scramjet engine was simulated using Wind-US, a density-based Reynolds-Averaged Navier-Stokes flow solver. Detailed flowfield simulation results are directly compared to experimental data to evaluate the accuracy of the numerical model and to provide insight into the flowfield behavior. Four hydrogen-air reaction mechanisms were initially assessed using the Burrows-Kurkov case. An Evans-Schexnayder, 7-specie, 8-reaction set with third body efficiencies was then selected for the scramjet simulations. The scramjet simulations included one fuel-off case and two reacting cases with different equivalence ratios, all with clean, non-vitiated air supply. The strong sensitivity …

Design And Numerical Evaluation Of A Counter- Rotating Compressor In The Absence Of Boundary Layer Control: Part I, Naiara Petralanda

Master's Theses - Daytona Beach

The purpose of this thesis was to design and evaluate a three stage counter-rotating compressor that employed well established design principles and technologies using a phased approach. The objective of the first phase was to generate the preliminary annulus shape and estimate the major parameters by modeling the flow as inviscid and time independent. The second and third phases refined the design approximating the flow using Euler's equations and the Navier-Stokes equations respectively.

The performance predictions decreased as the design move forward and more accurate flow and loss models were used. The final three dimensional analysis, which was limited to …

Study Of The Influence Of Nacelle And Pylon On Aerodynamics Of A New Vu Design, Romain Larose

Master's Theses - Daytona Beach

The purpose of this thesis was to illustrate the influence of the nacelle and pylon on aerodynamics of a new Very Light Jet design, using Computational Fluid Dynamics.

The objective of the first phase was to repair the existing CATIA model in order to facilitate the meshing process.

The second and third phase was to create two meshes: a mesh for the complete model (aircraft with nacelle and pylon), and a second for the aircraft alone.

The two problems have been solved at cruise conditions using Navier-Stokes equations with a second order accuracy.

The model complying with theory, the results …

Modeling And Parameter Estimation Of Spacecraft Lateral Fuel Slosh, Yadira Rodriguez Chatman

Master's Theses - Daytona Beach

Predicting the effect of fuel slosh on spacecraft and launch vehicle attitude control systems has been a very important and challenging task and has been the subject of considerable research over the past years. Analytic determination of the slosh analog parameters has been met with mixed success and is made more difficult by the introduction of propellant management devices such as elastomeric diaphragms. The experimental set-up in this research incorporates a diaphragm in a simulated spacecraft fuel tank subjected to lateral slosh behavior. This research focuses on the parameter estimation of a SimMechanics model of the simulated spacecraft propellant tank …

Book Review: Tourists In Space: A Practical Guide, T. D. Oswalt

Publications

This document is Dr. Oswalt’s review of Tourists in Space : a Practical Guide by Erik Seedhouse. Springer/Praxis, 2008 314p, 9780387746432 $34.95

Application Of Kalman Filtering To Real-Time Flight Regime Recognition Algorithms In A Helicopter Health And Usage Monitoring System, Rachel Elizabeth Rajnicek

Master's Theses - Daytona Beach

The purpose of this study is the application of Kalman filters to real-time Flight Regime Recognition (FRR) algorithms to identify the regime flown and observe transitions between flight regimes. Rotor fault identification, a technique that is somewhat similar to flight regime recognition, successfully used Kalman filters to determine fault types and damage locations. Recently developed FRR algorithms successfully applied Hidden Markov Models, which are similar to Kalman filters. The selected regime set for this study derives from a study performed by Bell Helicopter Textron, Inc. The selected parameter set for this study is modified from the Schweizer 300 Flight Test …

Modeling, Analysis And Testing Of A Semi-Active Control System For Landing Gear Applications, David James Majko

Master's Theses - Daytona Beach

There have been several recent studies on the potential benefits of controllable dampers. Controllable dampers can use a fluid with controllable properties, such as Magneto - Rheological fluid (MR fluid), or control the damping force by changing orifice size. For this project, controllable dampers were created using MR fluid. When exposed to a magnetic fluid, the viscosity of MR fluid can change significantly. By replacing the standard damper oil in an aircraft landing gear and exposing the system to an appropriate magnetic field, the damping coefficients of the system can be changed almost instantaneously to accommodate nearly any situation. This …

Using Ansys Workbench Computer Environment In Turbomachinery Design Process, Patricia Lynn Bowlds

Master's Theses - Daytona Beach

The main focus of designing turbomachinery is to analyze and optimize the aerodynamic efficiency and structural integrity of the machine. The preferred way to perform aerodynamic and structural analysis is to connect the analyses and shorten the analysis time as much as possible. ANSYS, Inc. provides a comprehensive approach to model fluid structure interaction phenomenon in turbomachinery within the ANSYS Workbench environment. This environment combines a number of software components that conduct blade design, fluid dynamic and structural analyses, and pre- and post-processing including mesh generation and overall performance estimation.

The focus of this study is to apply the ANSYS …

An Investigation Of Classical Panel Stiffener Buckling Methods For Modern Airframe Applications, Ryan Timothy Holt

Master's Theses - Daytona Beach

Classical methods for buckling assessment of aircraft panels reinforced by bulb-stiffened flanges differ regarding symmetric versus asymmetric cross-sections. The present research addresses a number of classical derivations of methods with a focus on the work of Dwight Windenburg as published in "The Elastic Stability of Tee Stiffeners" and the expansion of his work to asymmetric sections by E. F Bruhn in Analysis and Design of Aerospace Vehicle Structures. Vagueness in the relevance of geometric symmetry of the bulb exists between Windenburg's plate theory approach, and the accepted industry standard applications defined in the methods of Bruhn. The results presented trace …

Development Of Automatic Cfd Grid Generation For The Design Of The Preliminary Wing Sweep Schedule For The Gulfstream Quiet Supersonic Jet, Ali Kazeneh

Master's Theses - Daytona Beach

The wing sweep schedule for the Gulfstream Quiet Supersonic Jet (wing and body) was investigated using CFD analysis methods. The use of automating the gridding procedure allowed for numerous cases to be investigated. The examination of the drag polar for different Mach cases indicated the optimum corresponding wing sweep position. The study results revealed that for the Mach 0.85 case, the wings should remain at the forward most pivoted position (Ʌ=25°). The Mach 1.1 case indicted that the wings should be in the fully swept back position (Ʌ=60°). The majority of the wing sweep transition occurs from Mach 0.85 to …

Development, Verification, And Future Applications Of A 3-Dof Entry And Descent Simulation Tool, Shaun Deacon

Master's Theses - Daytona Beach

With any space related mission, the unknown effects are often some of the most important design considerations. These effects must be accounted for in some fashion, and often lead to mission elements being centered around gathering information on the unknown.

It is the purpose of this research to develop and test a tool for simulation of entry, descent, and landing, (EDL) and to present a brief analysis of possible dispersion patterns related to autonomous radiosonde deployment on the surface of Mars.

The EDL simulation tool is written in Matlab. The aerodynamic information used by the tool is obtained with the …

Wing Optimization Technique Based On Vortex Lattice Theory, Santiago Pinzon

Master's Theses - Daytona Beach

An integrated aerodynamic optimization technique based on vortex lattice theory is being proposed. The technique in this work will aim at optimizing the geometric parameters of a general wing with NACA 65-210 airfoil sections under a low speed aerodynamic regime. This will be completed by performing an aerodynamic analysis based on vortex lattice theory with the objective of satisfying a performance index function. This function will seek to optimize the high lift-to-drag ratio of the wing at cruise velocity, while maximizing theoretical cruise range and minimizing wing weight. The optimization method has been developed using MATLAB and the focus of …

Implementation Of A Low Cost Micro Electro Mechanical Systems Inertial Navigation Solution, Charles Njenga

Master's Theses - Daytona Beach

The purpose of this study is to develop a low cost navigation solution for General Aviation (GA) aircraft and flight testing aircraft. This low cost solution uses a Global Positioning System (GPS) coupled with an Inertial Navigation Solution (INS) to provide a more accurate, stable navigation solution that can be acceptable for aircraft navigation. Lab VIEW was utilized to perform data acquisition and computation. LabVIEW was the backbone software to perform real time computation. MATLAB ® Simulink ® was used to plot graphs for final analysis of the code. A software Kalman Filter was utilized to provide signal stability and …

Attitude Determination Using Imaging Lidar, Camille Decoust

Master's Theses - Daytona Beach

The purpose of this study is to determine the attitude of an out of control object using a new technology called lidar (Light Ranging and Detection). As the number of spacecraft continues to grow, it is paramount to introduce a new type of autonomous on-orbit satellite inspection and repair involving docking. Traditional space vision technology is based on video systems. This method is limited by the necessity of operating when the target is illuminated by the sunlight or using its own source of illumination. The use of laser imaging technology offers an elegant solution to these challenges. This approach allows …

A Cfd Investigation Of Axisymmetric Microthruster Nozzles For Use On Nano-Satellites, Michael R. O'Gara

Master's Theses - Daytona Beach

The performance of microthruster nozzles (^ 0.1 N thrust) depending on nozzle contour, propellant and surroundings, destined for use in nanosatellite missions, is investigated via a numerical approach using the Wind-US flow solver. An experimental apparatus designed to measure microthruster performance in atmospheric or vacuum conditions used to aid numerical simulations is also presented. Comparing the numerical and experimental results show an approximate 25% drop in efficiency for unknown reasons. An evaluation of favorable nozzle contours suggested by previous researchers is conducted, and the results demonstrate the need for a more rigorous treatment of the nozzle flow at the exit …

A Computational Method For Flow Separation Detection And Control For Axial Compressor Airfoils, Chang Jun Meang

Master's Theses - Daytona Beach

Conducting full annulus experiments on multistage compressors is costly and time consuming due to the complexity of the experimental processes. To reduce complexity, Computational Fluid Dynamics (CFD) methods are applied to turbomachinery and other applications in recent analysis of such cases. CFD methods are widely used within the aerospace industry and are increasingly demonstrating their reliability. For axial compressors, it is known that highly staggered compressor stators will increase the aerodynamic loading on the stator, which directly relates to the compressor stall and efficiency. In this work, compressor stators stagger angle is increased 4 ° to induce separation on the …

Assessment Of The Thermal Improvements Awarded By Horseshoe Vortex Elimination On A Turbine Stator Blade In Computational Fluid Dynamics And Conjugate Heat Transfer, Laurent Lachmann

Master's Theses - Daytona Beach

The present work looks at an advanced turbine stator blade design and evaluates its thermal performance relative to a standard design. A new turbine stator blade is designed to eliminate the horseshoe vortex appearing at the leading edge. The new design is characterized by an extension of the leading edge at the hub and at the tip of about 30% of chord. By comparing this new design to an ordinary one (featuring straight leading edge), the present thesis verifies the horseshoe vortex elimination, and compares the thermal attributes of the fluid. The fluid is three-dimensional, viscous and turbulent. The analysis …

Study Of Contra-Rotating Coaxial Rotors In Hover: A Performance Model Based On Blade Element Theory Including Swirl Velocity, Florent Lucas

Master's Theses - Daytona Beach

The purpose of this study is to create a simple model to evaluate the performance of a counter-rotating coaxial rotor system. As it is based on the blade element theory, it could be used as a design tool where the engineer can modify all parameters - rotor radius, blade pitch distribution, tip velocity, rotor spacing, number of blades, blade chord, and airfoil's shape through its lift coefficient versus angle of attack slope. Different blade pitch distributions are tried and are assessed based on the power required to hover at the same weight. Also, the impact of the swirl velocity induced …

Space Suit Concepts And Vehicle Interfaces For The Constellation Program, D. M. Klaus, J. Metts, R. Kobrick, M. Mesloh, T. Monk, Et Al.

Publications

In carrying out NASA’s Vision for Space Exploration, a number of different environments will be encountered that will require the crew to wear a protective space suit. Specifically, four suited mission phases are identified as Launch, Entry & Abort profiles, Contingency 0g (orbital) Extravehicular Activity (EVA), Lunar Surface EVA and Martian Surface EVA. This study presents conceptual design solutions based on a previous architecture assessment that defined space suit operational requirements for four proposed space suit configuration options. In addition, a subset of vehicle interface requirements are defined for enabling umbilical and physical connections between the suits and the various …

The Effects Of Foreign Accent And Language On Reaction Time And Accuracy In An Air Traffic Control Task, Rosabelle Suarez

Master's Theses - Daytona Beach

The present study examines the effect of foreign accent interference with the ability to execute commands presented in speech format. The objective of this study was to demonstrate that a foreign accent influences performance. Participants were between 18 and 40 years of age. Half of the participants were native speakers of Spanish who began learning English as a second language via the classroom setting. The other half were native English-speaking with little or no exposure to the Spanish language. The experimental design was similar to an aviation scenario where participants listened to simulated ATC procedural commands and execute them on …

Microthruster Experimental Analysis, Amy Denise Richards

Master's Theses - Daytona Beach

The purpose of this study was to design an experimental apparatus that could accurately test and measure the thrust efficiency of conical shaped microthrusters with varying divergence half angles. The experimental apparatus measured the thrust of micronozzles for various feed pressures in vacuum (to duplicate in space operation) as well as ambient. Calibration experiments confirmed the force measurement accuracy of the setup while gas thrust experiments were used to help determine the most efficient divergence half angle. Thrust results were compared to findings from two separate scientific studies that sought to optimize microthruster nozzles using CFD software.

Internet Enabled Remote Driving Of A Combat Hybrid Electric Power System For Duty Cycle Measurement, Jarrett Goodell, Marc Compere, Wilford Smith, Mark Brudnak, Mike Pozolo, Et Al.

Publications

This paper describes a human-in-the-loop motion-based simulator interfaced to hybrid-electric power system hardware, both of which were used to measure the duty cycle of a combat vehicle in a virtual simulation environment. The project discussed is a greatly expanded follow-on to the experiment published in [1,7]. This paper is written in the context of [1,7] and therefore highlights the enhancements. The most prominent of these enhancements is the integration (in real-time) of the Power & Energy System Integration Lab (P&E SIL) with a motion base simulator by means of a “long haul” connection over the Internet (a geographical distance of …

Prediction Of Fatigue Life In 7075-T6 Aluminum From Neural Network Analysis Of Acoustic Emission Data, Nicholas S. Spivey

Master's Theses - Daytona Beach

Through the use of an acoustic emission (AE) data acquisition system, a Kohonen self-organizing map, and a back-propagation neural network, AE data from 7075-T6 aluminum specimens were used to classify failure mechanisms and predict the number of fatigue cycles to failure. AE waveforms were captured from 40 notched tensile specimens during the low-cycle fatiguing process. A Kohonen self-organizing map and initial data filters were used to classify the data into two distinct failure mechanisms, plane strain and plane stress fracture, plus a third less prevalent mechanism. These results were employed to construct a back-propagation neural network to predict the number …

Fabrication And Compressive Behavior Of Corrugated Aramid-Epoxy Cellular Solids, Jeffrey Arthur Schneider

Master's Theses - Daytona Beach

Cellular solids are materials whose base material does not always occupy the entire solid fraction available. A number of cellular solids can provide blast protection and absorb impact energy, but few perform well resisting blunt object (ballistic) penetration. In this thesis, a method is proposed for fabricating cellular solids from aramid-epoxy composites that can absorb impact energy and resist blunt object penetration. The aramid-epoxy samples were fabricated using wet-layup techniques, with two different styles of Kevlar 49 woven fabric in a variety of orientations. Test sample density ranged from 0.08 0.23 g/cm3. Different lamination orientations, assembly techniques, and bonding adhesives …

Investigation Of Magnetic Field Profile Effects In Hall Thrusters, Oren Kornberg

Master's Theses - Daytona Beach

The purpose of this study was to show the relationship of different magnetic field profiles to the acceleration region length of a Hall thruster. The general transport equations were simplified and solved using a one-dimensional analysis. Some of the model assumptions include quasineutrality, Maxwellian electrons, and negligible thruster wall effects. The solved equation kept magnetic field as an input to the model for the analysis. The magnetic field was altered by changing the shape through the thruster, while keeping the maximum point fixed, and by shifting the profile, while keeping the shape fixed. Results indicate a strong correlation between the …

Soldier/Hardware-In-The-Loop Simulation-Based Combat Vehicle Duty Cycle Measurement: Duty Cycle Experiment 2, Mark Brudnak, Mike Pozolo, Victor Paul, Syed Mohammad, Marc Compere, Et Al.

Publications

This paper describes a human-in-the-loop motion-based simulator interfaced to hybrid-electric power system hardware both of which were used to measure the duty cycle of a combat vehicle in a virtual simulation environment. The project discussed is a greatly expanded follow-on to the experiment published in [1]. This paper is written in the context of [1] and therefore highlights the enhancements. The most prominent of these enhancements is the integration (in real-time) of the Power & Electric System Integration Lab (P&E SIL) with a motion base simulator by means of a “long haul” connection over the Internet (a geographical distance of …

Control System Design And Simulation Of Spacecraft Formations Via Virtual Formation Approach, Pavan Donepudi

Master's Theses - Daytona Beach

The problem of formation control of multiple spacecraft using the virtual structure approach is studied. The thesis first summarizes the progress made in the area of spacecraft formation control and then provides an overview of the virtual structure method. Modifying earlier established control design techniques, new feedback laws are constructed to control both the rotational and translational motion of a group of spacecraft. Several computer simulations are performed to illustrate the effectiveness of the modified control laws. The ephemeris and attitude data files generated via Matlab are exported to Satellite Tool Kit (STK) to create 3D animations. Various formation scenarios …

Validation Of Conjugate Heat-Transfer Capability For Water- Cooled High-Speed Flows, Bruno R. Fletcher

Master's Theses - Daytona Beach

A FORTRAN conduction/convection heat transfer module named FOGO (meaning fire in Portuguese) has been developed to perform the conjugate heat transfer analyses with existing flow solvers. In this work, FOGO is coupled with TBD and WIND-US flow solvers. WIND-US is a well validated flow solver developed by NASA, AEDC, and Boeing. TBD is a new flow solver developed at ERAU. TBD is verified for laminar stagnation point heat transfer prediction and turbulent flowfield protection. The FOGO module is verified against an exact solution for transient one-dimensional heat flow in a semi-infinite solid

The coupled TBD-FOGO and WIND-FOGO conjugate heat-transfer solvers …