Aerospace Engineering Commons^™

Scan Loss Pattern Synthesis For Adaptive Array Ground Stations, William C. Barott, Mary Ann Ingram, Paul G. Steffes

Publications

We present several techniques for maximizing the contact time between low Earth orbiting satellites (LEOs) and a ground station (GS). The GS comprises an adaptive array of electronically steered space-fed lenses (SFLs). Each SFL is manufactured as a low-cost printed circuit with the result that it exhibits scanning loss. By differently orienting the boresights of the SFLs in the adaptive array, the SFL's scanning losses can be made to optimally complement the path loss of the LEO, thereby reducing the cost of the GS while maximizing the download capacity of the satellite link. The optimization, implemented with a genetic algorithm …

A Design-Build-Test-Fly Project Involving Modeling, Manufacturing, And Testing, Scott Post, Shankar Seetharaman, Sree Abimannan

Publications

This paper describes a junior-level semester-long class project for students in Fluid Mechanics courses. The goals of the project are to introduce students to engineering design, project management, and to incorporate material from other courses in engineering graphics, numerical methods, instrumentation and measurements, and manufacturing processes in a single project. The project focuses on airfoil design using computational tools, and the main emphasis lies on verification of results obtained from computational methods with experimentally measured values. Students will use the airfoil shape they select to make wings to go on a model foam glider. The final part of the project …

Neural Network Fatigue Life Prediction In Notched Aluminum Specimens From Acoustic Emission Data, Muhammed Arif Okur

Master's Theses - Daytona Beach

This purpose of this research was to identify fatigue crack growth and predict failure for 7075-T6 aluminum notched bars under uniaxial tensile loading using acoustic emission (AE) data. The experiments performed in this study extend the results obtained by previous researchers who used maximum cyclic loads of 4,000, 3,000, and 2,000 pounds at a stress ratio of R = 0.0 and a frequency of 1 Hz to perform the fatigue tests. For this research the cyclic load remained at 2,000 pounds, but an additional ten specimens were tested in order to increase the amount of AE data available to the …

Numerical Simulation Of A Liquid Jet Atomization And Break-Up Using Ansys-Cfx 12.0, Yash Akhil Bhatt

Master's Theses - Daytona Beach

Break-up and atomization characteristics of JetA liquid fuel were investigated numerically. The results have been compared to various experimental results to evaluate the accuracy of the numerical model. The CFD code ANSYS-CFX 12.0 was used to carry out the steady state analysis at different time scales. A comparison between the atomization characteristics of a pressure jet atomizer and an air-blast atomizer is shown. By employing a Lagrangian particle tracking method to track the path of the liquid particles, the liquid jet/spray phenomena was studied in light of low and high back pressure environments. The 'BLOB' primary atomization model and the …

Acoustic Emission Fatigue Crack Monitoring Of A Simulated Aircraft Fuselage Structure, Jeremy James Lucas

Doctoral Dissertations and Master's Theses

The purpose of this research was to replicate the fatigue cracking that occurs in aircraft placed under loads from cyclical compression and decompression. As a fatigue crack grows, it releases energy in the form of acoustic emissions. These emissions are transmitted through the structure in waves, which can be recorded using acoustic emission (AE) transducers. This research employed a pressure vessel constructed out of aluminum and placed under cyclical loads at 1 Hz in order to simulate the loads placed on an aircraft fuselage in flight. The AE signals were recorded by four resonant AE transducers. These were placed on …

Stability Of Fully Nonlinear Stokes Waves On Deep Water: Part 1. Perturbation Theory, Shahrdad Sajjadi, David L. Ross

Publications

We consider a full set of harmonics for the Stokes wave in deep water in the absence of viscosity, and examine the role that higher harmonics play in modifying the classical Benjamin-Feir instability. Using a representation of the wave coefficients due to Wilton, a perturbation analysis shows that the Stokes wave may become unbounded due to interactions between the N^th harmonic of the primary wave train and a set of harmonics of a disturbance. If the frequency of the n^th harmonic is denoted Ꙍ_n = Ꙍ(1 ± ꭉ) then instability will occur if

√2 k n^{n …}

Parametric Viscous Analysis Of Gust Interaction With Stationary And Elastically Mounted Airfoil, Timothy M. Hollenshade Jr.

Master's Theses - Daytona Beach

This thesis details the development and implementation of a module within a high-accuracy numerical viscous analysis code to simulate the nonlinear interaction of SD7003 airfoil with non-uniform, unsteady incoming flow. The study is focused on the low-Re number unsteady flows typical of MAV applications in which a gust encounter can induce a particularly significant aerodynamic and aeroelastic response. Efficient source models are developed to introduce sharp-edge and time-harmonic gust perturbations with specified amplitude, frequency and duration inside the computational domain through the source terms in the governing momentum equations. Parametric analysis of gust-airfoil interactions for different steady airfoil loads is …

Pilot Source Study: An Analysis Of Pilot Backgrounds And Subsequent Success In Us Regional Airline Training Programs, Guy M. Smith, David A. Newmyer, Elizabeth Bjerke, Mary Niemczyk, Raymond A. Hamilton

Applied Aviation Sciences - Daytona Beach

The 2010 Pilot Source Study, commissioned to research the success of pilots in initial training for Part 121 operations, analyzed the training performance of 2,156 new-hire pilots in the years 2005-2009. Six regional airlines provided data that was mined from human resource and pilot training files. Five university researchers independently analyzed the data and integrated their results. The study expressed success in terms of fewer extra training events and fewer non-completions in regional airline training. Statistically, the best performing pilots were those who had flight instructor certificates, graduated from collegiate accredited flight programs, received advanced (post-Private) pilot training in college, …

Removal Of Biofilm Through Controlled Cavitation, Mathew Chackalackal Mathew

Master's Theses - Daytona Beach

Human kind is poised to take the next "giant step" in space exploration, the manned mission to Mars, among other things. But before any plans for such long term habitation on an alien planet, there has to be consideration towards prevention and removal of bacterial contamination. Bacterial contamination or rather degradation of materials was considered of negligible importance. Bacterial degradation can be serious for long-term manned space mission, more so because there is no way to obtain quick replacements. For such conditions, a new innovative way of bacterial removal has been proposed wherein the bacteria is removed with no damage …

Grating Lobe Reduction In Aperiodic Linear Arrays Of Physically Large Antennas, William C. Barott, Paul G. Steffes

Publications

We present performance bounds obtained from the optimization of the sidelobe levels of aperiodic linear arrays. The antennas comprising these arrays are large compared to the distance between neighboring antennas, a case not addressed in previously published work. This optimization is performed in pattern-space and is applicable over a wide range of scan angles. We show that grating lobes can be suppressed even when the elemental antennas are several wavelengths in size, provided that the ratio of the antenna size to the average spacing between the antenna center-points does not exceed 80%.

Numerical Simulation Of Mode Transition In A Hydrogen-Fueled Scramjet, Manan Ajay Vyas

Master's Theses - Daytona Beach

The Wind-US computational fluid dynamics (CFD) flow solver was used to simulate dual-mode direct-connect ramjet/scramjet engine flowpath tests conducted in the University of Virginia (UVa) Supersonic Combustion Facility (SCF). The objective was to develop a computational capability within Wind-US to aid current hypersonic research and provide insight to flow as well as chemistry details that are not resolved by instruments available. Computational results are compared with experimental data to validate the accuracy of the numerical modeling. These results include two fuel-off non-reacting and eight fuel-on reacting cases with different equivalence ratios, split between one set with a clean (non-vitiated) air …

The Effect Of Pilot And Air Traffic Control Experiences & Automation Management Strategies On Uas Mission Task Performance, Christopher J. Reynolds

Master's Theses - Daytona Beach

Unmanned aircraft are relied on now more than ever to save lives and support the troops in the recent Operation Enduring Freedom and Operation Iraqi Freedom. The demands for UAS capabilities are rapidly increasing in the civilian sector. However, UAS operations will not be carried out in the NAS until safety concerns are alleviated. Among these concerns is determining the appropriate level of automation in conjunction with a suitable pilot who exhibits the necessary knowledge, skills, and abilities to safely operate these systems.

This research examined two levels of automation: Management by Consent (MBC) and Management by Exception (MBE). User …

Flight Regime And Maneuver Recognition For Complex Maneuvers, Jerome H. Travert

Master's Theses - Daytona Beach

The purpose of this study is to demonstrate capability of flight regime recognition during complex maneuvers flown in a fixed wing airplane using measured data from an Inertial Measurement Unit (IMU). Flight Regime Recognition (FRR) is required for numerous applications in the aerospace and aviation industry, including the determination of loads for stress and strain analysis. It can also be used in recreational aviation for maneuver recognition, for example in aerobatics.

This study uses a flight simulator to generate representative flight data that is parsed by a specifically developed algorithm into appropriate flight regimes. This algorithm is a filter technique …

An Analytical Investigation Of Natural Frequency For A Symmetric Composite Box-Beam With Thermal Effects, Lakshmi Narayana Sanjeev Chitikela

Master's Theses - Daytona Beach

The main purpose of the following analysis is to develop an analytical method for determining the natural frequency of a symmetric composite box-beam subjected to temperature gradient. A set of coupled partial differential equations of motion is obtained by means of small defection theory and D'Alembert's method. The Smith and Chopra stiffness matrix is used in the governing equations of motion and an appropriate MATLAB® code has been written to solve for the stiffness matrix elements of the box-beam. The resulting governing equations of motion are solved to obtain the natural frequencies of the box-beam in flap and lag directions …

Compression After Impact Load Prediction In Graphite/Epoxy Laminates Using Acoustic Emission And Artificial Neural Networks, Anthony Michael Gunasekera

Master's Theses - Daytona Beach

The purpose of this research was to investigate the effectiveness of artificial neural networks (ANNs) in predicting the compression after impact (CAI) load of graphite/epoxy laminates from acoustic emission (AE) nondestructive testing (NDT) data. Thirty-four 24-ply bidirectional woven cloth laminate coupons were constructed and impacted at various energy levels ranging from 8 to 20 Joules, generating barely visible impact damage (BVID). Acoustic emission data were acquired as the coupons were compressed to failure. Not having been analyzed by previous experimenters, several noise tests were also performed to determine the impact of external noise on acoustic emission data during testing. Once …

Thermal Modeling Of Lithium-Ion Energy Storage Systems For Hybrid Electric Vehicles Using Computational Fluid Dynamics With Conjugate Heat Transfer, Craig R. Czlapinski

Master's Theses - Daytona Beach

The success and performance of a Hybrid Electric Vehicle (HEV) relies largely on its Energy Storage System (ESS). High temperatures and thermal variations can significantly affect a battery's performance and lifecycle. An effective thermal management system is vital to the health and safe operation of the ESS's batteries. A well designed thermal management system begins with the accurate prediction of the battery's thermal conditions. In hot climates, HEVs may be required to operate within ten degrees Celsius of the maximum safe operating temperature of their batteries. This study aims to evaluate the thermal management system of a lithium-ion based energy …

Determination Of Stability And Control Derivatives For A Modern Light Composite Twin Engine Airplane, Monica M. Londono

Master's Theses - Daytona Beach

To develop and compare full envelope stability and control derivatives and their associated errors for a modern light composite twin engine airplane from flight test data and digital DATCOM (Data Compendium). This development is to serve three purposes 1) to provide data for validation of newer analytical techniques such as Computational Fluid Dynamics (CFD), 2) to provide public domain static and dynamic stability and control derivatives for a modern twin engine airplane, 3) to analyze the relationship between test design and error for both output error and equation error methods.

A flight test program was conducted on a Diamond Twin …

Unmanned Aircraft System Propulsion Systems Technology Survey, Christopher Griffis, Timothy Wilson, Jeffrey Schneider, Peter Pierpont

Publications

This technology survey is an investigation of various propulsion systems used in Unmanned Aircraft Systems (UAS). Discussed are existing and near-future propulsion mechanisms of UAS, such as reciprocating piston engines, Wankel rotary engines, gas turbine engines, rocket-powered systems, electric motors, and battery-based systems. Also discussed are systems that use proton exchange membrane fuel cells, photovoltaics, ultracapacitors, and propellers. Each system is described in reference to a larger conceptual framework, with instances and profiles of existing UAS employing the system being described. Advantages and disadvantages of each type of propulsion system are identified along with associated technical issues and their respective …

Heavy-Fueled Intermittent Ignition Engines: Technical Issues, Jeffrey Arthur Schneider, Timothy Wilson, Christopher Griffis, Peter Pierpont

Publications

This report contains an overview of the technology and engineering issues with nonturbine heavy-fueled engines for general aviation aircraft and Unmanned Aircraft Systems. In recent years, interest in these types of engines has grown, partly due to the cost, safety, and worldwide availability of gasoline fuels. Within 3 to 5 years, up to five engines will seek Federal Aviation Administration certification as heavy-fuel powerplants. Although there has been some progress, there is no universal standard for certification of these engines (under Title 14 Code of Federal Regulations (CFR) Part 33), or their installation into normal category fixed-wing aircraft or rotorcraft …

Developing Abrasion Test Standards For Evaluating Lunar Construction Materials, Ryan L. Kobrick, David M. Klaus, Kenneth W. Street

Publications

Operational issues encountered by Apollo astronauts relating to lunar dust were catalogued, including material abrasion that resulted in scratches and wear on spacesuit components, ultimately impacting visibility, joint mobility and pressure retention. Standard methods are being developed to measure abrasive wear on candidate construction materials to be used for spacesuits, spacecraft, and robotics. Calibration tests were conducted using a standard diamond stylus scratch tip on the common spacecraft structure aluminum, Al 6061-T6. Custom tips were fabricated from terrestrial counterparts of lunar minerals for scratching Al 6061-T6 and comparing to standard diamond scratches. Considerations are offered for how to apply standards …

Magnetic Stabilization Of Nadir-Pointing Small Satellites, Chau T. Ton

Master's Theses - Daytona Beach

Since magnetic control systems are relatively lightweight, require low power and are inexpensive, they are attractive for small, inexpensive satellites in low Earth orbits. In this thesis we present averaging-based feedback control laws that achieve three-axis stabilized nadir-pointing attitude. Two types of nonlinear feedback control laws are proposed: full-state feedback and passivity-based feedback. Full-state feedback uses the attitude and angular velocity measurements to regulate the spacecrafts dynamics. Passivity-based feedback uses the attitude measurement and doesn’t require the rate sensors. The control laws are tested using two magnetic field models: the tilted dipole model and the International Geomagnetic Reference Field (IGRF) …

An Intelligible Software (Cfa) Approach For Fiber-Reinforced Laminate Failure Analysis Including A Piecewise Representation Of The Tsai-Wu Failure Criterion Using Excel And Matlab, Ryan C. Schmidt

Master's Theses - Daytona Beach

Present generations rely heavily on the use of petroleum as their primary means of transportation. As the cost of petroleum continues to escalate, the need for lightweight structures for vehicle applications becomes more evident. The ability to engineer materials so that they possess desired application specific properties and characteristics has made tremendous progress in the past century. Consequently, the use of these composite materials for aircraft weight reduction has been investigated for decades.

The aerospace industry often uses composite materials to make a laminated composite structure where each constituent ply of the laminate has its own material properties. This anisotropic …

Access Mars: Assessing Cave Capabilities Establishing Specific Solutions: Final Report, Abdul Mohsen Al Husseini, Luis Alvarez Sanchez, Konstantinos Antonakopoulos, Jeffrey (Johannes) Apeldoorn, Kenneth Lowell Ashford Jr., Kutay Deniz Atabay, Sara Langston, Et Al.

Publications

The human race has evolved, grown and expanded through the exploration of Earth. After initial steps on the Moon, our next challenge is to explore the solar system. Mars shows potential for both scientific discovery and future human settlement, and so is a prime candidate for the next leap of human exploration. Such a bold endeavor will be a driver for an unprecedented worldwide cooperative effort and the catalyst for a new era of international, intercultural and interdisciplinary human relations. Scientific and technological progress will also accelerate as mankind is ushered into a new era of space exploration.

Currently proposed …

Are Wireless Sensors Feasible For Aircraft?, Thomas Yang, Jianhua Liu, Ilteris Demirkiran

Department of Electrical Engineering and Computer Science - Daytona Beach

Wireless communications is a preferred way of data transmission in many aerospace applications. Replacing some aircraft sensor wiring with wireless communications is a highly desirable but challenging transformation. The related sensors are referred to as aerospace wireless sensors (AWSs). This replacement can lower the weight of aircraft wiring, improve the overall safety of aircraft, simplify the design of aircraft structures, and lower the sensor installation and maintenance cost. The major concern for using AWSs is the potential negative effects on overall reliability and safety of aircraft. In this paper, the feasibility of using AWSs is discussed. In particular, the appropriate …

A Technology Survey Of Emergency Recovery And Flight Termination Systems For Uas, Richard Stansbury, Wesley Tanis, Timothy Wilson

Publications

For safe flight in the National Airspace System (NAS), either under the current interim rules or under anticipated longer-term regulatory guidelines facilitating unmanned aircraft system (UAS) access to the NAS, the UAS must incorporate technologies and flight procedures to ensure that neither people nor property in the air, on the ground, or on or in the water are endangered by the failure of an onboard component, by inappropriate unmanned aircraft (UA) response to pilot commands, or by inadvertent entry by the UA into prohibited airspace. The aircraft must be equipped with emergency recovery (ER) procedures and technologies that ensure that …

Molecular Dynamics Study Of Crystal Plasticity During Nanoindentation In Ni Nanowires, V. Dupont, F. Sansoz

Aerospace Engineering - Daytona Beach

Molecular dynamics simulations were performed to gain fundamental insight into crystal plasticity, and its size effects in nanowires deformed by spherical indentation. This work focused on-oriented single-crystal, defect-free Ni nanowires of cylindrical shape with diameters of 12 and 30 nm. The indentation of thin films was also comparatively studied to characterize the influence of free surfaces in the emission and absorption of lattice dislocations in single-crystal Ni. All of the simulations were conducted at 300 K by using a virtual spherical indenter of 18 nm in diameter with a displacement rate of1 ms1. No significant effect of sample size was …

On The Inside Of Spaceshipone, Dan Linehan

ERAU Prescott Aviation History Program

Hear the inside story of the development, testing and flight of the world’s first privately built and piloted manned spacecraft by the author of “SpaceShip One” An Illustrated History”. Exciting photos, videos and animations will help explain how and why all this took place.

The Effects Of Elasticity In The Foundation On The Flutter Of A Metallic High Aspect Ratio Wing, Horacio Esteban Sepic Kriskovich

Master's Theses - Daytona Beach

The goal of this thesis is to study the flutter characteristics of a metallic high-aspect ratio wing, with linearly varying chord across the semis-span, and a simulated elastic foundation. The general planform of the wing is similar to the one found in a High- Altitude Long-Endurance Uninhabited Aerial Surveillance Vehicle (HALE USAV).

The problem is studied using a simplified aerodynamic loading based on thin-airfoil theory, which is then combined with a Lagrangian formulation to solve the system as stationary. The wing has no control surfaces or external stores, and is modeled as a uniform beam with known mechanical properties, being …

Design, Implementation And Validation Of An Attitude Determination Subsystem For Nanosatellites, Mathieu Naslin

Master's Theses - Daytona Beach

The purpose of this study is to design and analyze the accuracy of an attitude determination subsystem for a satellite of the CubeSat class by using low cost sensors. CubeSats are nanosatellites that complies a certain amount of layout criterions described by the California Polytechnic State University. A 3-axis attitude determination platform has been designed with emphasis on the use of low cost, off the shelf sensors. This platform features a sun sensor, a magnetometer and an earth sensor. The principles of observation and the description of the acquisition method are explained. The interfacing of the software package and real …

Invited Article: Data Analysis Of The Floating Potential Measurement Unit Aboard The International Space Station, Aroh Barjatya, Charles M. Swenson, Donald C. Thompson, Kenneth H. Wright

Publications

We present data from the Floating Potential Measurement Unit (FPMU) that is deployed on the starboard truss of the International Space Station. The FPMU is a suite of instruments capable of redundant measurements of various plasma parameters. The instrument suite consists of a floating potential probe, a wide-sweeping spherical Langmuir probe, a narrow-sweeping cylindrical Langmuir probe, and a plasma impedance probe. This paper gives a brief overview of the instrumentation and the received data quality, and then presents the algorithm used to reduce I-V curves to plasma parameters. Several hours of data are presented from August 5, 2006 and March …