Aerospace Engineering Commons^™

Coupling Of Fluid & Solid Thermal Models To Correct Heat Flux Measurements Taken On Launch Vehicles, Danielle M. Ford

Master's Theses - Daytona Beach

Knowledge of aerothermally induced convective heat transfer and plume induced radiative heat transfer loads is essential to the design of thermal protection systems (TPS) for launch vehicles. These loads are measured via the cylindrical heat flux gauges that are flush mounted with the outer surface of a launch vehicle and are exposed to the in-flight external thermal and velocity boundary layers as well as thermal radiation. Typically, Schmidt-Boelter gauges measure the incident heat flux based on the one-Dimensional Fourier's law. This instrumentation, when surrounded by low-conductivity insulation, has an exposed surface temperature significantly lower than the insulation. A substantial disturbance …

Neural Network Burst Pressure Prediction In Composite Overwrapped Pressure Vessels From Acoustic Emission Data, Seth-Andrew T. Dion

Master's Theses - Daytona Beach

Composites have grown in importance in the aerospace industry where high specific strength is a priority. Weight reduction in space vehicles is critical because of the exorbitant cost associated with placing objects into space. Major weight savings have been obtained by switching from all metal pressure vessels to composite overwrapped pressure vessels (COPVs). Due to the nature of composites, current nondestructive analysis procedures for COPVs are not adequate for assessing structural integrity. As such, new methods must be developed. Presented herein is one such method.

A method for burst pressure prediction using parametric filtering of acoustic emission (AE) data along …

Robust Control Techniques Enabling Duty Cycle Experiments Utilizing A 6-Dof Crewstation Motion Base, A Full Scale Combat Hybrid Electric Power System, And Long Distance Internet Communications, Marc Compere, Jarrett Goodell, Miguel Simon, Wilford Smith, Mark Brudnak

Publications

The RemoteLink effort supports the U.S. Army's objective for developing and fielding next generation hybrid-electric combat vehicles. It is a distributed soldierin- the-Ioop and hardware-in-the-Ioop environment with a 6-DOF motion base for operator realism, a full-scale combat hybrid electric power system, and an operational context provided by OneSAF. The driver/gunner crewstations rest on one of two 6-DOF motion bases at the U.S. Army TARDEC Simulation Laboratory (TSL). The hybrid power system is located 2,450 miles away at the TARDEC Power and Energy System Integration Laboratory (P&E SIL). The primary technical challenge in the RemoteLink is to operate both laboratories together …

Optimization Of Active Rendezvous Trajectories By Genetic Algorithms, Marie Emmanuelle Ricour

Master's Theses - Daytona Beach

Trajectory optimization is and will remain a hot topic in the engineering field. Because analytical or exact solutions are often difficult and sometimes impossible to compute, there is a need for alternative and efficient methods. UnderWater Vehicles (UWV) trajectories and rendezvous trajectories of continuous low-thrust spacecraft are examined. One of the methods to solve such problems is the Genetic Algorithm (GA) method. In this work, a GA has been developed using Matlab®. It treats possible solutions to the studied problems as individuals and eventually converges to an optimal or near optimal solution. Genetic Algorithms have been used previously to solve …

Evaluation Of Probabilistic Methodology For Predicting Satellite Tracking Resources, Matthew Lynn Stubbe

Master's Theses - Daytona Beach

This research evaluates a probabilistic methodology for estimating the ability of satellite tracking networks to provide tracking and data acquisition services to large constellations of satellites. This approach, developed by Hagar is evaluated using Monte Carlo simulations of optimal satellite contact scheduling on a tracking network for a certain class of satellites. The actual results of the scheduled Monte Carlo simulations were then compared to the predicted values computed with Hagar's methodology for a range constellation and network sizes. Comparison methods include percent difference, a Wilcoxon signed ranks test and a Mann-Whitney U test.

The Monte Carlo simulations were run …

Grain Growth Behavior At Absolute Zero During Nanocrystalline Metal Indentation, F. Sansoz, V. Dupont

Aerospace Engineering - Daytona Beach

The authors show using atomistic simulations that stress-driven grain growth can be obtained in the athermal limit during nanocrystalline aluminum indentation. They find that the grain growth results from rotation of nanograins and propagation of shear bands. Together, these mechanisms are shown to lead to the unstable migration of grain boundaries via process of coupled motion. An analytical model is used to explain this behavior based on the atomic-level shear stress acting on the interfaces during the shear band propagation. This study sheds light on the atomic mechanism at play during the abnormal grain coarsening observed at low temperature in …

Innovative Schematic Concept Analysis For A Space Suit Portable Life Support Subsystem, M. Schuller, R. Kobrick, T. Lalk, L. Wiseman, F. Little, Et Al.

Publications

Conceptual designs for a space suit Personal Life Support Subsystem (PLSS) were developed and assessed to determine if upgrading the system using new, emerging, or projected technologies to fulfill basic functions would result in mass, volume, or performance improvements. Technologies were identified to satisfy each of the functions of the PLSS in three environments (zero-g, Lunar, and Martian) and in three time frames (2006, 2010, and 2020). The viability of candidate technologies was evaluated using evaluation criteria such as safety, technology readiness, and reliability. System concepts (schematics) were developed for combinations of time frame and environment by assigning specific technologies …

Theoretical Analysis Of Transpiration Cooling Of A Liquid Rocket Thrust Chamber Wall, Philip A. Davis

Master's Theses - Daytona Beach

Transpiration cooling is a process that could reduce the overall weight of the cooling system of an actively cooled thrust chamber wall of a liquid rocket engine by up to 50% when compared to other active cooling techniques, increasing the thrust to weight ratio of the rocket engine. In this thesis, mathematical models and computer codes were developed for simulating the flow of a coolant and the transport phenomena in a transpiration cooled thrust chamber wall of a liquid rocket engine by treating the coolant in two ways: as an incompressible fluid and as a compressible fluid in local thermal …

Parameter Estimation Of Spacecraft Fuel Slosh Using Pendulum Analogs, Keith L. Schlee

Master's Theses - Daytona Beach

The nutation (wobble) of a spinning spacecraft in the presence of energy dissipation is a well-known problem in dynamics and is of particular concern for space missions. Its rate of growth is characterized by the Nutation Time Constant (NTC). For analytical prediction of the NTC, fuel slosh is often modeled using simple mechanical analogs such as pendulums or rigid rotors coupled to the spacecraft. Identifying model parameter values which adequately represent the sloshing dynamics is the most important step in obtaining a good NTC estimate. Currently, the identification of the model parameters is a laborious trial-and-error process in which the …

An Investigation Of The Dynamic Effects Of Flap Deflection On The Aerodynamic Characteristics Of An Airplane Wing Using Computational Fluid Dynamics, Alexander Moerchel

Master's Theses - Daytona Beach

Flaps are used to increase an airplane's lift and to adjust its stability and maneuverability. This study shows an application of STAR-CD, a commercial computational fluid dynamics (CFD) software, to an investigation of the dynamic effects of flap deflection on the lift, drag and moment coefficients, as well as on the location of the center of pressure. For this study, a plain flap was modeled with a moving mesh and was attached to a NACA 0012 airfoil and a wing of a general aviation aircraft for a 2D and 3D investigation, respectively. In addition, the flap deflection rates were varied …

Reweighting At-Sat To Mitigate Group Score Differences, Andrew R. Dattel, Raymond E. King

Publications

The Air Traffic Selection and Training (AT-SAT) test battery is the selection tool for applicants for Air Traffic Control Specialist (ATCS) positions within the Federal Aviation Administration (FAA) who have not previously been employed as an air traffic controller. AT-SAT is an aptitude test developed to predict the likelihood of successfully learning ATCS skills. Before operational use, however, concerns were raised about the low passing rate of incumbent (who are fully trained and certified) ATCS personnel (who participated in the initial research) and score differences between groups, which could result in adverse impact (possible unfair discrimination). To address these concerns, …

Filtering Of Acoustic Emission Data Through Principal Frequency Component Extraction, Justin O. Karl

Master's Theses - Daytona Beach

Rapid editing of acoustic emission (AE) data is required in order to make real-time acoustic emission flaw growth systems a viable testing method for materials and setups that contain noisy signals. It was hypothesized that extracting major frequency components from the acoustic emission signal would therefore provide a representative acoustic signature of the major waveforms occurring due to defect growth This research has verified that the aforementioned filtering technique does, in fact, extract a representative signal from the composite and metal specimens utilized herein These findings were verified both through visual analysis of the data as well as the low …

Dynamics Of Nonlinear Diffusion Processes, Dustin A. Sipka

Master's Theses - Daytona Beach

The purpose of this thesis is to analyze nonlinear diffusion processes. In particular, some of the results arrived at by Newman and Sagan in their 1981 paper "Galactic Civilizations: Population Dynamics and Interstellar Diffusion," will be reproduced by different means. First, a thorough analysis of the linear diffusion equation will be performed in order to test a numerical algorithm that can solve the nonlinear diffusion equation and look at the processes of interest with sufficient accuracy. Once the algorithm is tested and shows good resolution it is used to solve the nonlinear equation. The post processing is then done to …

Impact Simulation And Analysis Of Sandwich Structures, Daewon Kim

Master's Theses - Daytona Beach

Impact damage on aircraft and spacecraft can be a severe problem that may cause catastrophic results. Several aerospace structures have been used to resist or absorb energy in the occasion of impact. Among these, a sandwich structure has advantages with high stiffness, strength to weight ratio, and its relatively cheap cost. However, finding the impact structural response of a sandwich structure, by performing experiments, has disadvantages. First, impact is a complex problem with a multi-parameter nature and many factors should be considered. Secondly, it is a destructive test and the test subject may be damaged during the test. On the …

Design Optimization Of The First Stage Fan Blade Of A Low Bypass Turbofan Engine, Troy James Ramnath

Master's Theses - Daytona Beach

A procedure for solving for and analyzing the aerodynamics, thermodynamics, and blade geometry across the first stage rotor blade under an extreme set of conditions, while altering several design parameters, has been developed and applied. The conditions for which the analyses have been developed were designed for the use of, but not exclusively limited to the application of, military aircraft at altitude. The approach consists of solving for specific key performance parameters across the first stage rotor and analyzing their trends due to the effect of varying other parameters, such as the axial velocity at the rotor's trailing edge, circumferential …

An Automated Optimal Design Of A Fan Blade Using An Integrated Cfd/Mdo Computer Environment, Uyi O. Idahosa

Master's Theses - Daytona Beach

The objective of the investigation is the development of more efficient design methodologies based on the applications of established design tools including Computational Fluid Dynamics (CFD) and non-linear Multidisciplinary Design Optimization (MDO) algorithms. Well known evolutionary type optimization algorithms include the Particle Swarm Optimization (PSO), Response Surface Optimization (RSO) and Genetic (GA) Algorithms. The benchmark case study is the optimal design of a low speed fan for an industrial air-conditioning application using the Response Surface Optimization (RSO) algorithm.

The optimization algorithm controls the variations of parameters that describe the three-dimensional geometry of the blade while applying performance and geometrical constraints …

Tools For Analysis Of Complex Geometries For A Combined Cycle Scram Jet / Rocket, James Moss

Master's Theses - Daytona Beach

A preliminary design for a variable geometry combined cycle supersonic combustion ram jet (SCRAM jet) / rocket was developed. A precise geometry was selected by parametric analysis and the resultant geometry was analyzed using a computational fluid dynamics (CFD) code developed by Dr. Eric Perrell, and modified by, among others, the author.

This paper is broken into several sections discussing, separately, the design innovations used to permit the geometry of the craft to be adjusted to conform to its flight conditions, the 2D analysis tool developed for the parametric analysis, development of the grid for CFD analysis, and modifications made …

Maneuvering Control Of A Spacecraft With Propellant Sloshing, Philip A. Savella

Master's Theses - Daytona Beach

Propellant slosh has been a problem studied in spacecraft designs since the early days of large, liquid-fuel rockets. The conventional design solution involves physical structures inside the fuel tanks that limit propellant motion. Although effective, baffles and bladders add to spacecraft mass and structural complexity. In this research, the sloshing fuel mass is treated as an unactuated degree of freedom within a rigid body. Specifically, the propellant is modeled as a pendulum mass anchored at the center of a spherical tank. After obtaining the coupled equations of motion, several linear controllers are developed to achieve planar spacecraft pitch-maneuvers while suppressing …

Derivation Of A Numerical Method For Computing 3-D Magnetoplasmadynamic Flows In Thermodynamic Non-Equilibrium, Caroline CéCile Marcelle Liron

Master's Theses - Daytona Beach

Various models exist for the propulsion concept using magnetohydrodynamics (MHD). Various authors, such as Powell, Canupp, Candler, and MacCormack have dealt with issues of solving the magnetic field induction equations simultaneously with Navier-Stokes equations using Computational Fluid Dynamics (CFD). Although most authors deal with species non-equilibrium and thermal non-equilibrium, a new emphasis is set to study the impact of electrons with the electron energy and the electronic excitation energy, as well as a complex energy non-equilibrium.

This thesis presents the derivation of a numerical method for computing 3-D MHD flows for the purpose of modeling steady-state magnetoplasma …

Damage Assessment And Strength Predictions In S-Glass/Epoxy Laminates Subjected To Low Energy Impact, Tuan-Khoi Dang Nguyen

Master's Theses - Daytona Beach

Composite materials have become one of the leading materials for manufacturing in the aerospace industry today. Compared to "conventional" aerospace metals, composites generally have higher strength-to-weight and stiffness-to-weight ratios, good fatigue and corrosion resistance and reduced parts count. However, like any other material, they also have disadvantages. They are inherently brittle and are thus prone to impact damage. Low energy/velocity impact damage, in particular, can be dangerous because the damage oftentimes goes undetected and can subsequently grow under load. Also known as barely visible impact damage (BVID), this area of concentration focuses on the small-scale damage that may be very …

Investigation Of A Highly Loaded, High Pressure Ratio Axial Turbine Stage For Industrial Applications, Amit Garg

Master's Theses - Daytona Beach

The turbine component of a gas turbine engine is the most costly component due to its complexity, and life requirements, given the harsh environment in which it is required to operate. Minimizing the number of stages can lead to significant savings in terms of development efforts, materials, and serviceable parts. This philosophy has led to a significant increase in the work demanded from the typical stage. In this work, a highly loaded axial turbine stage was designed for high power-output industrial applications using a comprehensive set of investigations, which included parametric studies, throughflow solutions, and 2D airfoil shapes. The design …

Fabrication And Compressive Yield Strength Of Open Cell Corrugated Cellular Solids, Jeong Ho Choi

Master's Theses - Daytona Beach

This thesis studied the fabrication and compressive yield strength of open cell corrugated cellular solids made from type 304 stainless steel. Test samples were made by corrugating woven wire meshes, then laminating these in a high temperature argon environment. Mesh sizes ranging from 9.5 pore/cm (24 pore/in) to 31.5 pore/cm (80 pore/in) with wire diameters ranging from 0.178 mm (0.007 in) to 0.3556 mm (0.014 in) were bonded using lithobraze 925 (Ag-7.5Cu-0.2Li) to create cellular solids having relative densities ranging from 0.0384 to 0.0920. Test samples were then quasistatically compressed to measure the stress-strain response. The stress level at 25% …

Modeling And Slew-Maneuver Control Of A Flexible Spacecraft, Jeremy E. Eckhart

Master's Theses - Daytona Beach

Slew-maneuver control problem is studied for a flexible spacecraft consisting of a rigid main body to which a long flexible appendage is attached. Nonlinear dynamical system models are developed using both distributed parameter modeling and discrete parameter modeling; these models are shown to be equivalent for appropriately chosen system parameters. Lyapunov-based nonlinear feedback controllers are designed for the control of rigid-body motion while suppressing the lowest frequency vibrational mode. In case of large-angle maneuvers, these nonlinear controllers are shown to outperform the linearization-based controllers including the filtered proportional-derivative (PD) controllers as well as the linear quadratic regulator (LQR) controllers. Finally, …

A Computational Study Of Thermo-Fluid Dynamics Of Pulse Detonation Engines, Alberto Davila Urresti

Master's Theses - Daytona Beach

The purpose of this thesis is to use a transient Computational Fluid Dynamics computer code written in FORTRAN 90 for full reaction kinetics, to perform an analysis of the physical processes and chemical phenomena occurring on a single cycle of an ideal Pulse Detonation Engine (PDE) using a stoichiometric mixture of H₂ and O₂. A small zone of high pressure and temperature is used to initiate the detonation wave in the PDE. A simple case with no chemical reactions and the same PDE geometry and “computational spark” is also tested. The speed of the wave relative to …

Robust Control Techniques For State Tracking In The Presence Of Variable Time Delays, Jarrett Goodell, Marc Compere, Miguel Simon, Wilford Smith, Ronnie Wright, Mark Brudnak

Publications

In this paper, a distributed driver-in-the-Ioop and hardware-in-the-Ioop simulator is described with a driver on a motion simulator at the U.S. Army TARDEC Ground Vehicle Simulation Laboratory (GVSL). Realistic power system response is achieved by linking the driver in the GVSL with a full-sized hybrid electric power system located 2,450 miles away at the TARDEC Power and Energy Systems Integration Laboratory (P&E SIL), which is developed and maintained by Science Applications International Corporation (SAIC). The goal is to close the loop between the GVSL and P&E SIL over the Internet to provide a realistic driving experience in addition to realistic …

Control System Design And Simulation Of Spacecraft Formations, Daniel Dyer

Master's Theses - Daytona Beach

The objective of this thesis is to analyze an effective control scheme for a formation of spacecraft, implement that control, and provide a 3-D simulation. The thesis first summarizes the progress made in formation flight control schemes and then provides a theoretical framework for the control system design. Using established control design techniques, feedback laws are constructed to control both rotational and translational motion of a group of spacecraft. Computer simulations are carried out using Matlab to generate the ephemeris and attitude data, which are exported to Satellite Tool Kit (STK) to create animations. The process by which Matlab is …

Accuracy Of Heat-Pulse Sensors For Determining Moisture Of Capillary Mat Material Used To Support Plant Growth, Marisa Wyssling

Master's Theses - Daytona Beach

The accuracy and precision of Orbital Technologies (Orbitec, Madison, WI) Thermal and Moisture Acquisition System (TMAS) sensors were investigated for use in the WONDER space flight experiment. WONDER is studying the effect of multiple wetness level regimes and two different nutrient delivery systems (NDS) on plants grown in the microgravity of space. The following research concentrates on the porous tube NDS consisting solely of a capillary mat surrounding a bare porous tube used for water delivery. Sensors and plants will be attached to the capillary mat, which transports water by capillary action. The TMAS sensors, single probe heat-pulse moisture sensors, …

The Effects Of Gender And Regional Dialect On Performance In Aviation Communication, Erin E. Mccollum

Master's Theses - Daytona Beach

The purpose of this study was to analyze the performance effects of gender and regional dialect on air traffic control statement recall. Sixty-one student volunteers participated in the experiment. Thirty-one participants held a pilot’s license and 30 participants had no flight experience. Each participant listened to one CD with 60 ATC statements each representing a male and female voice and New England, Southern, and General American dialect. Participants were asked to recall exactly what they heard. If the participant could not understand what they heard, they requested a repeat. The participant’s performance was recorded to CD and analyzed. Demographic questionnaires …

Adaptive Synchronization Of Chaos For Secure Communication, Manish Pantha

Master's Theses - Daytona Beach

The purpose of this thesis is to study the use of adaptive synchronization of chaos for secure communication. Several non-linear models were studied, the one-dimensional logistic map, two-dimensional coupled logistic map, three dimensional Lorenz systems with and without time delay. Numerical simulation using MATLAB was conducted. The Lorenz system with time delay was studied numerically as well as by testing an analog circuit and comparisons was made between them. It has been pointed out in many research papers that for low-dimensional chaotic processes, once intercepted, the information can be readily extracted, so the interest has been directed to higher dimensional …

Aeroelastic Analysis Of A Flexible Membrane Wing, Isaac Nguri Wanjohi

Master's Theses - Daytona Beach

The focus of this research proposal is the investigation of the aeroelastic effects of a flexible lift augmentation system (LAS) wing. This research involves characterization of the forced vibration response of a wing appendage used to augment short field take off and landing (STOL) operations.

Although flutter theory is now well understood, the LAS presents the complications of a highly deformable airfoil shape as well as larger structural damping values compared to metal wings.

The proposed research will involve derivation of the equations of motion aided by experimental data from nodal excitation of the wing; stiffness and rigidity modeling from …