Engineering Commons^™

Rain Induced Runoff Simulation Using A 2d Numerical Model, Tahmina Shirmeen

Electronic Theses and Dissertations

Runoff plays an important role in the agricultural and urbanized environments. Surface runoff is determined primarily by the amount of precipitation and by infiltration characteristics related to soil type, soil moisture, antecedent rainfall, land cover type, impervious surfaces, and surface retention. In this study, CCHE2D, a numerical model for free surface flow hydrodynamics, is applied to study the rain induced runoff and channel flow mixed problems. The main goal of this study is to incorporate rainfall as an input into the existing free surface flow model, CCHE2D; to verify and validate the CCHE2D model’s runoff simulation capability using analytical solutions …

Designing And Simulation Of Various Class-F Radio-Frequency Power Amplifier, Varun Pundhir

Browse all Theses and Dissertations

In this thesis, the various kinds of Class-F radio frequency power amplifiers are discussed. The Class-F3 RFPA is the one which has been designed and analyzed. It consists of an RF choke, blocking capacitor and a loading network. The loading network consists of a tank circuit resonating at fundamental operating frequency and also a parallel resonator circuit tuned to third harmonic. For a better understanding of the operation of Class-F3 amplifier, we go back to Class-C amplifier and discuss it briefly. Here the design remains same, operating at conduction angles less than 180 degree. The design equations were used to …

Engineering Healthcare Delivery: A Systems Engineering Approach To Improving Trauma Center Nursing Efficacy, Robert A. Myers

Browse all Theses and Dissertations

The efficacy of nurses is impacted by their availability to their patients and the occurrence of both beneficial and detrimental interruptions. Using system engineering tools, this work addresses open challenges in (i) methods for effective matching of nurse availability to non-stationary stochastic demand, (ii) differentiation of beneficial and detrimental interruptions, and (iii) modeling of nurses’ work with interruptions to provide an objective method of testing interruption interventions. First, we propose both qualitative and quantitative approaches to evaluate and then model the impact of resource scheduling on patient wait time in a Level I trauma center for a highly specialized nurse, …

Modeling, Simulation And Control Of Hybrid Electric Vehicle Drive While Minimizing Energy Input Requirements Using Optimized Gear Ratios, Sanjai Massey

Dissertations, Master's Theses and Master's Reports

This project was conducted to analyze (model and simulate) and optimize an electric motor based drive system to propel a typical passenger vehicle in an urban driving environment. Although there are many HEV and EV type systems on the market today, this paper chose the Toyota Prius HEV system as a baseline using a brushless AC motor.

Although a vehicle can be driven many ways, a more standardized Urban Dynamometer Driving Schedule, UDDS, was chosen to simulate real driving conditions. This schedule is determined by the US Environmental Protection Agency, EPA, and is intended to represent the city driving conditions …

Electronic Warfare Receiver Resource Management And Optimization, William Metz

Walden Dissertations and Doctoral Studies

Optimization of electronic warfare (EW) receiver scan strategies is critical to improving the probability of surviving military missions in hostile environments. The problem is that the limited understanding of how dynamic variations in radar and EW receiver characteristics has influenced the response time to detect enemy threats. The dependent variable was the EW receiver response time and the 4 independent variables were EW receiver revisit interval, EW receiver dwell time, radar scan time, and radar illumination time. Previous researchers have not explained how dynamic variations of independent variables affected response time. The purpose of this experimental study was to develop …

Efficient Time-Dependent System Reliability Analysis, Zhifu Zhu

Doctoral Dissertations

"Engineering systems are usually subjected to time-variant loads and operate under time-dependent uncertainty; system performances are therefore time-dependent. Accurate and efficient estimate of system reliability is crucial for decision makings on system design, lifetime cost estimate, maintenance strategy, etc. Although significant progresses have been made in time-independent reliability analysis for components and systems, time-dependent system reliability methodologies are still limited. This dissertation is motivated by the need of accurate and effective reliability prediction for engineering systems under time-dependent uncertainty. Based on the classic First and Second Order Reliability Method (FORM and SORM), a system reliability method is developed for multidisciplinary …

Applications Of Simulation And Optimization Techniques In Optimizing Room And Pillar Mining Systems, Angelina Konadu Anani

Doctoral Dissertations

"The goal of this research was to apply simulation and optimization techniques in solving mine design and production sequencing problems in room and pillar mines (R&P). The specific objectives were to: (1) apply Discrete Event Simulation (DES) to determine the optimal width of coal R&P panels under specific mining conditions; (2) investigate if the shuttle car fleet size used to mine a particular panel width is optimal in different segments of the panel; (3) test the hypothesis that binary integer linear programming (BILP) can be used to account for mining risk in R&P long range mine production sequencing; and (4) …

Design And Implementation Of A New Manet Simulator Model For Aodv Simulation, Si̇nan Tüncel, Hüseyi̇n Eki̇z, Ahmet Zengi̇n

Turkish Journal of Electrical Engineering and Computer Sciences

No abstract provided.

An Invastigation Of Band-Limited Fluid Damper Configuration Using Lumped Parameter Modeling, Ye Hong

Mechanical and Aerospace Engineering Theses - Archive

Vehicle suspension system is one of the key factors related to the vehicle dynamic characteristic. The fine tuning of suspension system between vehicle handling and ride comfort is not only a trade-off between these two aspects, but also, has its impact on vehicle safety and durability. For an optimal damper performance, the damper needs to generate sufficient damping force at maneuvering frequency (< 2 Hz); and it also needs to generate less damping force, which allow spring to filter the high frequency noise (> 2 Hz) generated by vehicle travels along rough road condition at speed. In order to achieve such performance, a lumped parameter model of Band-Limited Damper is proposed. Frequency response of both Conventional Damper and Band-Limited Damper are …

A Robust Data Exchange Framework For Connected Vehicle Technology Supported Dynamic Transit Operations, Yucheng An

All Theses

Transit systems are an integral part of surface transportation systems. A connected vehicle technology (CVT) supported transit system will assist the users to manage trips both dynamically and efficiently. The primary focus of this research is to develop and evaluate the performance of a secure, scalable, and resilient data exchange framework. In the developed data exchange framework, a new data analytics layer, named Transit Cloud, is used to receive data from different sources, and send it to different users for a Dynamic Transit Operations (DTO) application. The DTO application allows the transit users to request trip information and obtain itineraries, …

Heat Transfer Mechanisms In Water-Based Nanofluids., Masoudeh Ahmadi

Electronic Theses and Dissertations

Nanofluids are a class of heat transport fluids created by suspending nano-scaled metallic or nonmetallic particles into a base fluid. Some experimental investigations have revealed that the nanofluids have remarkably higher thermal conductivities than those of conventional pure fluids and are more suited for practical application than the existing techniques of heat transfer enhancement using millimeter and/or micrometer-sized particles in fluids. Use of nanoparticles reduces pressure drop, system wear, and overall mass of the system leading to a reduction in costs over existing enhancement techniques. In this work, the heat transfer coefficient is determined experimentally using copper oxide (CuO) based …

Modeling Of Gas Production From Shale Reservoirs Considering Multiple Transport Mechanisms, Chaohua Guo, Mingzhen Wei, Hong Liu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Gas transport in unconventional shale strata is a multi-mechanism-coupling process that is different from the process observed in conventional reservoirs. In micro fractures which are inborn or induced by hydraulic stimulation, viscous flow dominates. And gas surface diffusion and gas desorption should be further considered in organic nano pores. Also, the Klinkenberg effect should be considered when dealing with the gas transport problem. In addition, following two factors can play significant roles under certain circumstances but have not received enough attention in previous models. During pressure depletion, gas viscosity will change with Knudsen number; and pore radius will increase when …

Spare Parts On Demand Using Additive Manufacturing : A Simulation Model For Cost Evaluation., Stefan Jedeck

Electronic Theses and Dissertations

Little is known about the impact of additive manufacturing in the spare part supply chain. A few studies are available, but they focus on specific parts and their applications only. A general model, which can be adapted to different applications, is nonexistent. This dissertation proposes a decision making framework that enables an interested practitioner/manager to decide whether using additive manufacturing to make spare parts on demand is economical when compared to conventional warehousing strategy. The framework consists of two major components: a general discrete event simulation model and a process of designing a wide range of simulation scenarios. The goal …

Open Source Toolkit For Reentry Object Modeling, Christopher Lloyd Ostrom Ii

Master's Theses

Predicting the mass, position, and velocity of an object during its reentry are critical to satisfy NASA and ESA requirements. This thesis outlines a 3-D orbit and mass determination system for use on low earth orbit as applicable to general objects, of various material and size. The solution uses analytical models to calculate heat flux and aerodynamic drag, with some basic numerical models for simple orbit propagation and mass flow rate due to ablation. The system outlined in this thesis currently provides a framework for rough estimates of demise altitude and final mass, but also allows for many potential accuracy …

Numerical Simulations Of Twin Formation And Extension In Thin Face-Centred Cubic Metallic Films, Romuald Bejaud, Sandrine Brochard, Julien Durick

Nanomechanical Testing in Materials Research and Development V

The basic mechanisms of plasticity in face-centred cubic materials are now well known in bulk materials. However, several experimental studies have shown that at the nanoscale, some of its mechanisms can induce surprising mechanical properties when compared to bulk behaviour. The formation and extension of twins in metallic nanowire can, for example, generate super-plasticity [1] or the presence of growth nano-twins within a material can lead to strengthening effects [2]. Atomic simulations are particularly adapted for studying the plasticity mechanisms at play, since they allow their visualization at the atomic scale.

While many atomistic simulations studies have been focused on …

Water Resources Systems Analysis - University Of Texas San Antonio, Marcio Giacomoni

All ECSTATIC Materials

Systems Analysis methods use algorithmic and mathematical approaches for problem-solving. These are powerful methods that can be applied to solve complex design and management problems for water resources systems and other engineering areas. This class will focus on optimization methods, such as linear programming, integer programming, nonlinear programming, genetic algorithms, and dynamic programming, and their application to water resources systems. Advanced Systems Analysis methods, including sensitivity analysis, alternatives generation, and multi-objective optimization will be introduced to address the complexities associated with public sector decision-making. Course taught at University of Texas San Antonio.

Techno-Economic Analysis Of Protein Concentrate Produced By Flash Hydrolysis Of Microalgae, Alexander Nana Yaw Asiedu

Civil & Environmental Engineering Theses & Dissertations

Process simulation and techno-economic analysis of 95wt.% protein concentrate from microalgae has been performed using SuperPro Designer v. 9.0. This work, first of its kind, is focused on the economic analysis of protein concentrate that includes processes such as microalgae cultivation, harvesting, protein extraction and drying steps. A baseline capacity of 160 MT/day protein concentrate production on commercial basis has been analyzed. This throughput requires 336 MT/day dry algae (54 wt.% protein). The amount of carbon dioxide required to grow this quantum of algae is estimated to be 648 MT/day, which is produced from an in situ 21 MW power …

Simulation Modeling For Sustainability: A Review Of The Literature, Young B. Moon

Mechanical and Aerospace Engineering - All Scholarship

This article is a review of work published in various journals and conference proceedings on the topics of Simulation Modelling for Sustainability between January 2000 and May 2015. A total of 192 papers are reviewed. The article intends to serve three goals. First, it will be useful to researchers who wish to know what kinds of questions have been raised and how they have been addressed in the areas of simulation modelling for sustainability. Second, the article will be a useful resource for searching research topics. Third, it will serve as a comprehensive bibliography of the papers published during the …

Powder Compaction Simulation, Yuqi Fang, Caroline Baker, Marcial Gonzalez

The Summer Undergraduate Research Fellowship (SURF) Symposium

Powders are one of most manipulated materials in many industries such as food, pharmaceutical, energy and metallurgical industries. An important process for the powders is the compaction into solids with small porosity or high relative density. However, powders exhibit complex behavior during this process. After rearrangement and jamming of the powder bed, many types of deformation mechanisms dominate the compaction of granular materials, including elastic and plastic deformation of each individual particle. Therefore, having a better understanding of macroscale and microscale properties of powder beds and single particles during the compaction process is necessary. In addition, to reduce cost and …

Assessment Of Critical Technologies For Gas Turbine Engines Using Numerical Tools, Vinicius Pessoa Mapelli, Guillermo Paniagua, Jorge Sousa

The Summer Undergraduate Research Fellowship (SURF) Symposium

In 2014 gas turbine engine has reached a market value of 82.5 billion dollars, of which 59.5% are related to aircraft propulsion. The continuous market expansion attracts more and more the interest of researchers and industries towards the development of accurate numerical techniques to model thermodynamically the entire engine. This practice allows a performance and optimization analysis before the actual experimental testing, reducing the time and required investment in the design of a new engine. In this paper, a recently developed open source numerical tool named “Toolbox for the Modeling and Analysis of Thermodynamic Systems” (T-MATS) is used to assess …

Simulation Design For Photovoltaics Using Finite Difference Time Domain And Quadratic Complex Rational Function Methods, Jacob R. Duritsch, Haejun Chung, Peter Bermel

The Summer Undergraduate Research Fellowship (SURF) Symposium

Photovoltaics (PV) can in principle supply enough renewable energy to offset a great deal of fossil fuel usage. To achieve this transition, it is critical to develop improved PV cells with decreased material costs and improved efficiencies. This goal can be greatly facilitated by a tool simulating the absorption and efficiency of experimentally relevant 3-D PV designs made of realistic materials, including those that have not yet been discovered. By incorporating the quadratic complex rational function algorithm (QCRF) with the finite difference time domain methods (FDTD), simulations can include frequency response and optical properties, while allowing full customization of tandem …

Simulating Nanowires And Ultra-Thin Body Transistors Using Nemo5 On Nanohub.Org, Liang Yuan Dai, James E. Fonseca, Chu Yuan Chen, Gerhard Klimeck

The Summer Undergraduate Research Fellowship (SURF) Symposium

During the past twenty years, the most important aspects of semiconductor electronics have advanced into the nanometer range, resulting in exponential increases of microprocessor computing performance. As the size of electrical components continues to shrink, the cost of experimental research and industrial fabrication in this field has increased dramatically. Thus, the development of accurate nanoscale model simulations becomes necessary as a measure to decrease the high financial expenses of advancing semiconductor technology. This simulator supports atomistic modeling in order to provide an accurate description of the nanoscale devices, as current electrical components operate in the quantum regime and are affected …

Electronic And Mechanical Material Properties From Dft Calculations, Usama Kamran, David Guzman, Alejandro Strachan

The Summer Undergraduate Research Fellowship (SURF) Symposium

Materials modeling provides a cost and time efficient method for studying their properties, especially in nanotechnology where length and time scales are not accessible experimentally. Our research focuses on developing a tool useful for both instructional and research purposes that calculates material properties. The tool relies on density functional theory (DFT) calculations to compute specific properties for a wide range of materials including semiconductors, insulators, and metals. A major goal with our tool was to keep the GUI very simple for novice users, such as students, while retaining an advanced option section for experienced users, such as researchers. The tool …

Thermal And Mechanical Properties Of Polymers Using Molecular Dynamics, Daniel Glass, Alejandro Strachan, Lorena Alzate-Vargas, Chunyu Li, Benjamin Haley

The Summer Undergraduate Research Fellowship (SURF) Symposium

Polymer systems have gained attention during the past years because of their technological and industrial applications. Simulations, particularly molecular dynamics, are very useful for exploring properties of amorphous polymers, without using experiments. Our goal is to create a readily-available tool that will perform MD simulations in order to get thermal and mechanical properties (Glass transition temperature, Young Modulus) of the polymers. The work that has been done will be part of a tool to help people to learn about polymer properties including Glass Transition Temperature. We model some polymers at a scale of 10,000 atoms. The tool uses LAMMPS to …

Buckling-Driven Force Generation Of Cell Cortex, Pranith Lomada, Wonyeong Jung, Taeyoon Kim

The Summer Undergraduate Research Fellowship (SURF) Symposium

Actomyosin cortex, a thin network underlying cell membrane, is known to generate a large portion of tensile forces required for various cellular processes. Recently, theoretical studies predicted that buckling of actin filaments breaks symmetry between tensile and compressive forces developed by myosin motors, resulting in tensile stress at a network level. However, the significance of the filament buckling of the cortex has yet to be demonstrated either computationally or experimentally. Here, buckling-dependent stress generation of the cortex-like actomyosin network was investigated using an agent-based computational model consisting of actin filaments, actin cross-linking proteins (ACPs), and molecular motors. First, a wide …

Fundamental Problems In Porous Materials: Experiments And Computer Simulation, Zhanping Xu

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Porous materials have attracted massive scientific and technological interest because of their extremely high surface-to-volume ratio, molecular tunability in construction, and surface-based applications. Through my PhD work, porous materials were engineered to meet the design in selective binding, self-healing, and energy damping. For example, crystalline MOFs with pore size spanning from a few angstroms to a couple of nanometers were chemically engineered to show 120 times more efficiency in binding of large molecules. In addition, we found building blocks released from those crystals can be further patched back through a healing process at ambient and low temperatures down to -56 …

Simulation And Validation Of Radio Frequency Heating Of Shell Eggs, Soon Kiat Lau

Department of Food Science and Technology: Dissertations, Theses, and Student Research

Finite element models were developed with the purpose of finding an optimal radio frequency (RF) heating setup for pasteurizing shell eggs. Material properties of the yolk, albumen, and shell were measured and fitted into equations that were used as inputs for the model. When the egg was heated by itself, heating tend to be focused at the air cell to result in a “coagulation ring.” The focused heating near the air cell of the egg prevented satisfactory pasteurization of the egg, but deeper analysis of the simulation results offered a new perspective on how non-uniform RF heating could occur in …

Traction-Separation Relationships For Hydrogen-Induced Grain Boundary Embrittlement In Nickel Via Molecular Dynamics Simulations, Wesley Allen Barrows

Graduate Theses and Dissertations

The deleterious effects of atomic and molecular hydrogen on the mechanical properties of metals have long been observed. Although several theories exist describing the mechanisms by which hydrogen negatively influences the failure of materials, a consensus has yet to be reached regarding the exact mechanism or combination of mechanisms. Two mechanisms have gained support in explaining hydrogen’s degradative role in non-hydride forming metals: hydrogen-enhanced localized plasticity and hydrogen-enhanced decohesion. Yet, the interplay between these mechanisms and microstructure in metallic materials has not been explained. Accordingly, for this thesis, the three main objectives are: (i) to develop a numerical methodology to …

Estimation Of Optimal Productivity In Labor-Intensive Construction Operations, Krishna Prasad Kisi

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

In an attempt to evaluate the efficiency of labor-intensive construction operations, project managers typically compare actual with historical productivity for equivalent operations. However, this approach toward examining productivity only provides a relative benchmark for efficiency and may lead to the characterization of operations as objectively efficient when in reality such operations might simply be comparably efficient.

Optimal productivity is the highest sustainable productivity achievable under good management and typical field conditions. Optimal productivity is useful in the determination of the absolute efficiency of construction operations because an accurate estimate of optimal labor productivity allows for the comparison of actual vs. …

Formal Specification And Refinement Of The Navigation Tasks Of Autonomous Robots, Eman Rabiah

Theses

Autonomous robots are hybrid systems whose role in our daily life is becoming increasingly critical. They are tasked with various activities requiring reliability, safety, and correctness of their software-controlled behavior. Formal methods have been proved effective in addressing development issues associated with these software qualities. However, even though autonomous robot navigation is a primordial function, there is no research dealing with enhancing reliability of the navigation algorithms. Thus, our focus is to investigate this type of algorithms, and specifically path planning, a fundamental and critical functionality supporting autonomy. We formally address the issue of enhancing reliability of the widely-used A* …