Engineering Commons^™

Outer-Sphere Adsorption Of Para-Substituted Benzoates On Gibbsite: A Molecular Dynamics Investigation, Lukas Mcnaboe

Honors Scholar Theses

In soils, the spread of toxic organic anions through groundwater can be partially mitigated by the formation of inner- and outer-sphere complexes with aluminum (hydr)oxides. In current practice, a constant soil-water partition coefficient is used to describe the relative quantity of sorbed compound to that in solution. However this method is empirical and site-specific. In order to establish a thermodynamically relevant sorption model, sorption reactions between many mineral phases and organic compounds must be characterized. While there exists a wealth of research quantifying the sorption potential of ferric oxide mineral phases, there remains a gap in knowledge of these parameters …

Water Resources Systems Analysis - Colorado State University, Darrell Fontane

All ECSTATIC Materials

Applications of systems analysis, simulation and optimization techniques in water resources planning and management. Course taught at Colorado State University.

Toward A Theory Of Multi-Method Modeling And Simulation Approach, Mariusz A. Balaban

Computational Modeling & Simulation Engineering Theses & Dissertations

The representation via simulation models can easily lead to simulation models too simple for their intended purpose, or with too much detail, making them hard to understand. This problem is related to limitations of the modeling and simulation methods. A multi-method Modeling and Simulation (M&S) approach has the potential for improved representation by taking advantage of methods' strengths and mitigating their weaknesses. Despite a high appeal for using multiple M&S methods, several related problems should be addressed first. The current level of theoretical, methodological, and pragmatic knowledge related to a multi-method M&S approach is limited. It is problematic that there …

Modeling And Simulation Of Evacuation Plan For Hancock Stadium, Nirmal Neranjan Weerasekara

Theses and Dissertations

The goal of this study is to use Modeling and Simulation of Evacuation Plan (MSEP) to support management to execute proper evacuation plan in case of emergency at Hancock Stadium in Illinois State University. Analyses of the research literature and evacuation scenarios are used to build a simulation system that will connect a description of emergency and evacuation situation with its context. It shows how an evacuation plan actually functions. The results of the study will help safety managers to understand the current situations of evacuation according to the specific simulation scenarios. The evacuation simulation is categorized according to the …

Railroad Capacity Tools And Methodologies In The U.S. And Europe, Hamed Pouryousef, Pasi Lautala, Thomas White

Michigan Tech Publications, Part 1

A growing demand for passenger and freight transportation, combined with limited capital to expand the United States (U.S.) rail infrastructure, is creating pressure for a more efficient use of the current line capacity. This is further exacerbated by the fact that most passenger rail services operate on corridors that are shared with freight traffic. A capacity analysis is one alternative to address the situation and there are various approaches, tools, and methodologies available for application. As the U.S. continues to develop higher speed passenger services with similar characteristics to those in European shared-use lines, understanding the common methods and tools …

Experimental And Numerical Study Of High-Speed Friction Stir Spot Welding Of Advanced High-Strength Steel, Utsab Karki

Theses and Dissertations

With the desire to lighten the frame while keeping or increasing the strength, Advanced High-Strength Steels (AHSS) have been developed for use in the automotive industry. AHSS meet many vehicle functional requirements because of their excellent strength and acceptable ductility. But joining AHSS is a challenge, because weldability is lower than that of mild steels. Friction stir spot welding (FSSW) is a solid state joining process that can provide a solution to the weldability issues in AHSS, but FSSW has not been studied in great detail for this application. In this work, Si3N4 tools were used for FSSW experiments on …

The Programmatic Generation Of Discrete-Event Simulation Models From Production Tracking Data, Christopher Rand Smith

Theses and Dissertations

Discrete-event simulation can be a useful tool in analyzing complex system dynamics in various industries. However, it is difficult for entry-level users of discrete-event simulation software to both collect the appropriate data to create a model and to actually generate the base-case simulation model. These difficulties decrease the usefulness of simulation software and limit its application in areas in which it could be potentially useful. This research proposes and evaluates a data collection and analysis methodology that would allow for the programmatic generation of simulation models using production tracking data. It uses data collected from a GPS device that follows …

Compressibility Measurement And Modeling To Optimize Flow Simulation Of Vacuum Infusion Processing For Composite Materials, Paul Hannibal

Theses and Dissertations

Out-of-autoclave manufacturing processes for composite materials are increasing in importance for aerospace and automotive industries. Vacuum Infusion processes are leading the push to move out of the autoclave. An understanding of the various process parameters associated with resin infusion is necessary to produce quality product. Variance in compaction, resin, and vacuum pressures are studied, concentrating on developing a compaction pressure profile as it relates to fiber volume fraction. The purpose of this research is twofold: (1) to show and quantify the existence of a resin pressure gradient in compression testing using rigid tooling, and (2) to use measured test data …

Aerospike Rocket Motor Structural Webbing, Andrew Brock

Master's Theses

A labscale hybrid rocket motor test stand has been developed for research at Cal Poly. The primary focus of research using this rig has been the development of regenerative cooling techniques using nitrous oxide as coolant and oxidizer, as well as validation of technologies relating to the annular aerospike nozzle. In order to prevent undesirable deflection of the cantilevered spike, a structural stiffening web, referred to as “The Spider,” is proposed. The Spider resembles a three-spoked wheel, with the aerospike held by the inner hub and the chamber walls abutting the outer radius.

The Spider, placed upstream of the nozzle, …

Electron-Beam Patterning Of Teflon Af For Surface Plasmon Resonance Sensing, Mansoor A. Sultan

Theses and Dissertations--Electrical and Computer Engineering

Variable pressure electron beam etching and lithography for Teflon AF has been demonstrated. The relation between dose and etching depth is tested under high vacuum and water vapor. High resolution structures as small as 75 nm half-pitch have been resolved. Several simulation tools were tested for surface plasmon excitation. Grating based dual mode surface plasmon excitation has been shown numerically and experimentally.

Analytical And Numerical Validation Of Nozzle Spray Measurement Data Obtained From A Newly Developed Production System, Iddrisu Seidu

ETD Archive

A newly developed production test stand for measuring the spray angle of a pressure swirl atomizer was constructed and used to measure a product line of these pressure swirl atomizers -- the macrospray atomizer. This new test stand, utilizing constant temperature hot wire anemometers, captures the spray angle data based on the voltage drop the hot wire probes see as they traverse the spray cone of the atomizer and as fluid droplets impinge upon the wire. Datasets acquired from the experiments are compared and correlated with computational fluid dynamics (CFD) simulation data. In addition, angles obtained from another type of …

Dynamic Model Of A Non-Linear Pneumatic Pressure Modulating Valve Using Bond Graphs, Christopher L. Brubaker

ETD Archive

This research develops a mathematical model of the dynamic pressure response to a variable travel input of a pneumatic pressure modulating valve intended for use in a vehicle air brake system. Generically, the valve is a multi-domain system consisting of a mechanical portion and a pneumatic portion. Included in the mechanical portion of the model are compliance of the springs, inertia of the components, and resistance of the sliding components. The pneumatic portion of the model includes capacitance due to the compressibility of the gas, flow resistance through connected plumbing, and flow resistance through the valve control orifices. The development …

Information Propagation Algorithms For Consensus Formation In Decentralized Multi-Agent Systems, Christopher Hollander

Electronic Theses and Dissertations

Consensus occurs within a multi-agent system when every agent is in agreement about the value of some particular state. For example, the color of an LED, the position or magnitude of a vector, a rendezvous location, the most recent state of data within a database, or the identity of a leader are all states that agents might need to agree on in order to execute their tasking. The task of the decentralized consensus problem for multi-agent systems is to design an algorithm that enables agents to communicate and exchange information such that, in finite time, agents are able to form …

The Effect Of Videogame Play On Robotic Surgery Skill Acquisition, Alyssa Tanaka

Electronic Theses and Dissertations

Robotic surgery uses innovative technology to transcend a surgeon's skills when performing complex procedures. Currently, the only FDA approved robotic system is Intuitive's da Vinci Surgical System. While this system offers many advantages over other minimally invasive techniques, it also introduces a need for specialized training. Virtual reality simulators have emerged as valuable tools for standardized and objective robotic surgery skill training and assessments. In recent years, the idea of using video game technology in surgical education for laparoscopy has also been explored; however few have attempted to make a connection between video game experience and robotic surgical skills. Thus, …

Combustion Kinetics Of Advanced Biofuels, Ghazal Barari

Electronic Theses and Dissertations

Use of biofuels, especially in automotive applications, is a growing trend due to their potential to lower greenhouse gas emissions from combustion. Ketones are a class of biofuel candidates which are produced from cellulose. However, ketones received rather scarce attention from the combustion community compared to other classes such as, alcohols, esters, and ethers. There is little knowledge on their combustion performance and pollutant generation. Hence their combustion chemistry needs to be investigated in detail. Diisopropyl ketone (DIPK) is a promising biofuel candidate, which is produced using endophytic fungal conversion. A detailed understanding of the combustion kinetics of the oxidation …

Nanohub.Org: A Gateway To Undergraduate Simulation-Based Research In Materials Science And Related Fields, Tanya A. Faltens, Peter A. Bermel, Amanda Buckles, K Anna Douglas, Alejandro H. Strachan, Lynn K. Zentner, Gerhard Klimeck

Birck and NCN Publications

Our future engineers and scientists will likely be required to use advanced simulations to solve many of tomorrow's challenges in nanotechnology. To prepare students to meet this need, the Network for Computational Nanotechnology (NCN) provides simulation-focused research experiences for undergraduates at an early point in their educational path, to increase the likelihood that they will ultimately complete a doctoral program. The NCN summer research program currently serves over 20 undergraduate students per year who are recruited nationwide, and selected by NCN and the faculty for aptitude in their chosen field within STEM, as well as complementary skills such as coding …

Impact Of Large-Scale Installation Of Led Lamps In A Distribution System, Sohel Uddin, Hussain Sharef, Olav Krause, Azah Mohamed, Mohammad Abdul Hannan, Naz Niamul Islam

Turkish Journal of Electrical Engineering and Computer Sciences

The aim of this paper was to examine the utilization of a large number of nonlinear light emitting diode (LED) lamps in a distribution system and its impact on system power quality. Initially, harmonic and others electrical characteristics were identified by carrying out an experiment on four types of LED lamps available on the local market. On the basis of the identified characteristics, a new LED lamp model was developed in MATLAB Simulink. This model is called the time-dependent current source model and gives more accurate results than the fixed current source model. Then this model was applied to a …

Advancement And Validation Of A Plug-In Hybrid Electric Vehicle Model Utilizing Experimental Data From Vehicle Testing, Kevin Lloyd Snyder

Wayne State University Theses

The objective of the research into modeling and simulation was to provide an iterative improvement to the Wayne State EcoCAR 2 team's math-based design tools for use in evaluating different outcomes based on hybrid powertrain architecture tweaks, controls code development and testing. This thesis includes the results of the team's work in the EcoCAR 2 competition for university student teams to create and test a plug-in hybrid electric vehicle for reducing petroleum oil consumption, pollutant emissions, and Green House Gas (GHG) emissions.

Plant model validations and advancements brought the vehicle plant model directionally closer to the actual vehicle's experimental data …

Wind Energy Estimation Functions For Future Homes, Adel El-Shahat, Rami J. Haddad, Youakim Kalaani

Electrical & Computer Engineering: Faculty Publications

Wind energy is ideally suited for distributed generation systems to meet growing demand for electricity that find applications especially in developing countries. The motive of this study is to develop an efficient method to help identify and select the best sites to harvest the wind energy in Egypt. In this paper, a novel approach is proposed to estimate and appraise wind energy resources using Artificial Neural Network (ANN). To achieve this goal, an ANN-based algorithm was created and trained using relevant data collected from several wind monitoring posts installed across the country. Parameters such as latitude, longitude, elevation, and monthly …

Modeling Social Norms In Real-World Agent-Based Simulations, Rahmatollah Beheshti

Electronic Theses and Dissertations

Studying and simulating social systems including human groups and societies can be a complex problem. In order to build a model that simulates humans' actions, it is necessary to consider the major factors that affect human behavior. Norms are one of these factors: social norms are the customary rules that govern behavior in groups and societies. Norms are everywhere around us, from the way people handshake or bow to the clothes they wear. They play a large role in determining our behaviors. Studies on norms are much older than the age of computer science, since normative studies have been a …

A Generic Framework For Multi-Method Modeling And Simulation Of Complex Systems Using Discrete Event, System Dynamics And Agent Based Approaches., Konstantinos Mykoniatis

Electronic Theses and Dissertations

Decisions about Modeling and Simulation (M&S) of Complex Systems (CS) need to be evaluated prior to implementation. Discrete Event (DE), System Dynamics (SD), and Agent Based (AB) are three different M&S approaches widely applied to enhance decision-making of complex systems. However, single type M&S approaches can face serious challenges in representing the overall multidimensional nature of CS and may result in the design of oversimplified models excluding important factors. Conceptual frameworks are necessary to offer useful guidance for combining and/or integrating different M&S approaches. Although several hybrid M&S frameworks have been described and are currently deployed, there is limited guidance …

Integrated Maritime Simulation Complex Management, Quality And Training Effectiveness From The Perspective Of Modeling And Simulation In The State Of Florida, Usa (A Case Study), Yaser Sendi

Electronic Theses and Dissertations

Naturally, maritime training simulators at all events are valuable instructional and pedagogical tools. Through the history, the maritime simulation was utilized to train prospective maritime apprentices in whom it has filled the gap left by the acute shortage of opportunities for jobs onboard vessels around the globe. However, professional seafarers are the axis of success and competitiveness in the field of maritime training. They are the ones that, who are well trained and have the responsibilities of their work and the surrounding environment. In order to achieve the success along with effective training skills, both maritime companies and seafarers should …

Data-Driven Simulation Modeling Of Construction And Infrastructure Operations Using Process Knowledge Discovery, Reza Akhavian

Electronic Theses and Dissertations

Within the architecture, engineering, and construction (AEC) domain, simulation modeling is mainly used to facilitate decision-making by enabling the assessment of different operational plans and resource arrangements, that are otherwise difficult (if not impossible), expensive, or time consuming to be evaluated in real world settings. The accuracy of such models directly affects their reliability to serve as a basis for important decisions such as project completion time estimation and resource allocation. Compared to other industries, this is particularly important in construction and infrastructure projects due to the high resource costs and the societal impacts of these projects. Discrete event simulation …

A Framework For Safety Training Using Virtual Reality Software, Rana Riad

Electronic Theses and Dissertations

Safety training is a vital component to the well-being of individuals in all industries. With technology advancing at the current pace, conventional training methods are no longer the most effective way to communicate information. There is a strong need for safety training that incorporates new methods and forms of communication to obtain higher levels of comprehension. Virtual reality systems offer a highly customizable and interactive form of delivering information to users. This research addresses major gaps in the field of safety training using virtual reality systems and provides a design framework for creating a virtual safety-training system. A model for …

Particle-In-Cell Based Parameter Study Of 12-Cavity, 12-Cathode Rising-Sun Relativistic Magnetrons For Improved Performance, Alireza Majzoobi, R. P. Joshi, A. A. Neuber, J. C. Dickens

Electrical & Computer Engineering Faculty Publications

Particle-in-cell simulations are performed to analyze the efficiency, output power and leakage currents in a 12-Cavity, 12-Cathode rising-sun magnetron with diffraction output (MDO). The central goal is to conduct a parameter study of a rising-sun magnetron that comprehensively incorporates performance enhancing features such as transparent cathodes, axial extraction, the use of endcaps, and cathode extensions. Our optimum results demonstrate peak output power of about 2.1 GW, with efficiencies of ~70% and low leakage currents at a magnetic field of 0.45 Tesla, a 400 kV bias with a single endcap, for a range of cathode extensions between 3 and 6 centimeters.

Design Of Energy Storage Controls Using Genetic Algorithms For Stochastic Problems, Si Chen

Theses and Dissertations--Electrical and Computer Engineering

A successful power system in military applications (warship, aircraft, armored vehicle etc.) must operate acceptably under a wide range of conditions involving different loading configurations; it must maintain war fighting ability and recover quickly and stably after being damaged. The introduction of energy storage for the power system of an electric warship integrated engineering plant (IEP) may increase the availability and survivability of the electrical power under these conditions. Herein, the problem of energy storage control is addressed in terms of maximizing the average performance. A notional medium-voltage dc system is used as the system model in the study. A …

Modeling Crabbing Dynamics In An Electron-Ion Collider, A. Castilla, V. S. Morozov, T. Satogata, J. R. Delayen

Physics Faculty Publications

A local crabbing scheme requires π/2 (mod π) horizontal betatron phase advances from an interaction point (IP) to the crab cavities on each side of it. However, realistic phase advances generated by sets of quadrupoles, or Final Focusing Blocks (FFB), between the crab cavities located in the expanded beam regions and the IP differ slightly from π/2. To understand the effect of crabbing on the beam dynamics in this case, a simple model of the optics of the Medium Energy Electron-Ion Collider (MEIC) including local crabbing was developed using linear matrices and then studied numerically over multiple turns (1000 passes) …

Computational Electronics For The 21st Century: Reflections On The Past, Present, And Future, Mark S. Lundstrom

Department of Electrical and Computer Engineering Faculty Publications

The author’s career has coincided with the development of numerical simulation into an essential component of semiconductor device technology research and development. We now have a sophisticated suite of simulation capabilities along with new challenges for 21st Century electronics. This talk presents a short history of the field and a description of the current state of the art, but it concentrates on lessons learned and thoughts about how computational electronics can continue to contribute effectively to the development of new electronic device technologies. The author will argue that electronics is changing, and that computational electronics can play a key role …

Multifrequency Averaging Of Hysteresis-Current-Controlled Dc-Dc Converters, Yingying Liu

Theses and Dissertations--Electrical and Computer Engineering

Multifrequency averaging is one of the widely used modeling and simulation techniques today for the analysis and design of power electronic systems. This technique is capable of providing the average behavior as well as the ripple behavior of power electronic systems. Hysteresis current control has fast response and internal current stability through controlling switches to maintain the current within a given hysteresis band of a given current command. However the state space variables in a hysteresis controlled system cannot be directly approached by multifrequency averaging method because of time varing switching frequency. In this thesis, a method of applying multifrequency …

Using The Delta-Model For End-Stage Liver Disease To Improve The Decision-Making Process For The Donor Liver System, Joanne Chin

Walden Dissertations and Doctoral Studies

The purpose of this experimental research was to determine whether using delta-MELD as a criterion for the liver transplant patient selection process could improve the U.S. liver allocation system. This research closed a gap in current literature on the utility of delta-MELD for liver transplant patient selection. The frameworks of systems theory, the analytic hierarchy process, and the Kalman filter contributed to the development of 2 simulation models of the liver allocation system: one that used delta-MELD and one that did not use delta-MELD. The research question examined whether using delta-MELD could improve the liver allocation system by reducing the …