Engineering Commons^™

Bunch Splitting Simulations For The Jleic Ion Collider Ring, R. Gamage, T. Satogata

Physics Faculty Publications

We describe the bunch splitting strategies for the proposed JLEIC ion collider ring at Jefferson Lab. This complex requires an unprecedented 9:6832 bunch splitting, performed in several stages. We outline the problem and current results, optimized with ESME including general parameterization of 1:2 bunch splitting for JLEIC parameters.

Development Of A Transition Between An Energy-Absorbing Concrete Barrier And A Rigid Concrete Buttress, Tyler Schmidt

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

From 2010 to 2015, MwRSF researchers developed the RESTORE barrier, which is a restorable MASH TL-4 median barrier with a steel and concrete rail supported by elastomer posts and steel skids. The research effort reported herein describes the initial development of a transition from the RESTORE barrier to a rigid TL-4 concrete buttress.

The previously-developed RESTORE barrier LS-DYNA model was validated against three full-scale vehicle crash tests. Several design concepts were generated through a series of brainstorming efforts. The primary transition concept consisted of a pin and loop connection between the RESTORE barrier and rigid concrete buttress, which was designed …

Sysml Based Cubesat Model Design And Integration With The Horizon Simulation Framework, Shaun Luther

Master's Theses

This thesis examines the feasibility of substituting the system input script of Cal Poly’s Horizon Simulation Framework (HSF) with a Model Based Systems Engineering (MBSE) model designed with the Systems Modeling Language (SysML). A concurrent student project, SysML Output Interface Creation for the Horizon Simulation Framework, focused on design of the HSF Translator Plugin which converts SysML models to an HSF specific XML format. A SysML model of the HSF test case, Aeolus, was designed. The original Aeolus HSF input script and the translated SysML input script retained the format and dependency structure required by HSF. Both input scripts …

Experimental And Modeling Studies In Membrane Distillation, Lin Li

Dissertations

A variety of microporous hydrophobic flat sheet membranes of polyvinylidene fluoride (PVDF) and expanded-polytetrafluoroethylene (e-PTFE) are studied to evaluate the influence of membrane properties on their performance in desalination by direct contact membrane distillation (DCMD) and vacuum membrane distillation (VMD) processes. The membrane thickness is varied between 23 μm to 125 μm; the pore size is varied from 0.05 μm to 0.45 μm. The porosity is generally high in the range of 0.7 - 0.8. DCMD experiments are performed over a hot brine temperature range of 65 °C to 85 °C and distillate temperature at 25 °C for various brine …

Energy Models Of The Txaire Houses, Tajudeen Amadu Annafi

Mechanical Engineering Theses

Model calibration is important as its functions improve building models. A calibrated model of the TxAIRE Houses #1 and #2 have been developed using the OpenStudio software. The model was developed and calibrated with data of the year 2014 but can be used predict electricity consumption of any year.

An actual meteorological year (AMY) weather file was also created for the houses which was used for calibration. The data used to develop this weather file were measured on-site which improved the accuracy of the model. It was found that an error difference of -1.0 % and -4.2 % occurred between …

Computational Analysis Of Impact Loading On Wafer Level Chip Scale Packages Mounted On Printed Circuit Boards Of Varying Thickness, Anik Mahmood

Mechanical and Aerospace Engineering Theses - Archive

In the electronic industry one of the popular package is Chip Scale Package (CSP) due to its small form factor and low cost. To meet the need of new functionality and portability of the recent devices, CSPs’ have been most favorable choice for a long time. On the other hand, with the miniaturization process of these portable devices there is a growing risk of drop impact failure in day to day use. It’s not only the mechanical loading that is affecting the reliability of these devices but also thermal and thermo-mechanical loads are acting simultaneously. To analyze and ensure the …

Operational Decision Making For Medical Clinics Through The Use Of Simulation And Multi-Attribute Utility Theory., Bo Sun

Electronic Theses and Dissertations

Currently, health care is a large industry that concerns everyone. Outpatient health care is an important part of the American health care system and is one of the strongest growth areas in the health care system. Many people pay attention to how to keep basic health care available to as many people as possible. A large health care system is usually evaluated by many performance measures. For example, the managers of a medical clinic are concerned about increasing staff utilization; both managers and patients are concerned about patient waiting time. In this dissertation, we study decision making for clinics in …

Advances In Repurposing And Recycling Of Post-Vehicle-Application Lithium-Ion Batteries, Charles R. Standridge, Lindsay Corneal, Nicholas Baine

Mineta Transportation Institute

Increased electrification of vehicles has increased the use of lithium-ion batteries for energy storage, and raised the issue of what to do with post-vehicle-application batteries. Three possibilities have been identified: 1) remanufacturing for intended reuse in vehicles; 2) repurposing for non-vehicle, stationary storage applications; and 3) recycling, extracting the precious metals, chemicals and other byproducts. Advances in repurposing and recycling are presented, along with a mathematical model that forecasts the manufacturing capacity needed for remanufacturing, repurposing, and recycling. Results obtained by simulating the model show that up to a 25% reduction in the need for new batteries can be achieved …

Model Based Vehicle Simulation For Electrically Actuated Transmission Test Cells, Kenneth L. Gruel

Masters Theses

The Eaton Vehicle Group is responsible for the development of a large family of automotive products, including manual and automated manual transmissions for light, medium, and heavy duty vehicles. To further expand the transmission testing capabilities at Vehicle Group headquarters, the Vehicle Simulator system was developed and integrated into an existing motor-based test cell. System development time and cost were reduced by leveraging readily available vehicle models and real-time hardware. The Vehicle Simulator system allows a user to control the speed and torque settings of the test cell motors in manual mode, or switch the motors to vehicle emulation mode. …

A Recommendation System For Meta-Modeling: A Meta-Learning Based Approach, Can Cui, Mengqi Hu, Jeffery D. Weir, Teresa Wu

Faculty Publications

Various meta-modeling techniques have been developed to replace computationally expensive simulation models. The performance of these meta-modeling techniques on different models is varied which makes existing model selection/recommendation approaches (e.g., trial-and-error, ensemble) problematic. To address these research gaps, we propose a general meta-modeling recommendation system using meta-learning which can automate the meta-modeling recommendation process by intelligently adapting the learning bias to problem characterizations. The proposed intelligent recommendation system includes four modules: (1) problem module, (2) meta-feature module which includes a comprehensive set of meta-features to characterize the geometrical properties of problems, (3) meta-learner module which compares the performance of instance-based …

Modelling And Fem Simulation Of Electric Field Assisted Sintering Of Tungsten Carbide (Wc), Sree Koundinya

Electric Field Assisted Sintering and Related Phenomena Far From Equilibrium

Numerical modeling of sintering and its process variants (such as Hot Pressing, Hot Isostatic Pressing (HIP), Field Assisted Sintering Technique (FAST) or Spark Plasma Sintering (SPS), etc.) has been a field of interest among researchers and industrialists due to its efficiency in predicting various sintering characteristics such as densification, volumetric and shape changes. Thus, various mathematical models have been developed over the years, where, earlier models for sintering included rheological investigations which were able to capture the macroscopic shape and volume changes of a porous body over the process of sintering and were known as phenomenological models [1]. Due to …

Enhancement Of Supercapacitor Energy Storage By Leakage Reduction And Electrode Modification, Tete Tevi

USF Tampa Graduate Theses and Dissertations

Supercapacitors have emerged in recent years as a promising energy storage technology. The main mechanism of energy storage is based on electrostatic separation of charges in a region at the electrode-electrolyte interface called double layer. Various electrode materials including carbon and conducting polymers have been used in supercapacitors. Also, supercapacitors offer high life cycle and high power density among electrochemical energy storage devices. Despite their interesting features, supercapacitors present some disadvantages that limit their competitivity with other storage devices in some applications. One of those drawbacks is high self-discharge or leakage. The leakage occurs when electrons cross the double layer …

A Simulation Model For Decision Support In Business Continuity Planning, Marissa Anne Mosunich

Master's Theses

Enterprises with a global supply network are at risk of lost revenue as a result of disruptive disasters at supplier locations. Various strategies exist for addressing this risk, and a variety of types of research has been done regarding the identification, assessment and response to the risk of disruption in a supply chain network.

This thesis establishes a decision model to support Business Continuity Planning at the first-tier supplier level. The decision model incorporates discrete-event simulation of supply chain networks (through Simio software), Monte Carlo simulation, and risk index optimization. After modeling disruption vulnerability in a supply chain network, costs …

Zion File System Simulator, Robert Adams, Frederic Paladin

Open Access Publishing Support Funded Articles

File systems are fundamental for computers and devices with data storage units. They allow operating systems to understand and organize streams of bytes and obtain readable files from them. There are numerous file systems available in the industry, all with their own unique features. Understanding how these file systems work is essential for computer science students, but their complex nature can be difficult and challenging to grasp, especially for students at the beginning of their career. The Zion File System Simulator was designed with this in mind. Zion is a teaching and experimenting tool, in the form of a small …

Understanding Bulk Behavior Of Particulate Materials From Particle Scale Simulations, Xiaoliang Deng

Dissertations

Particulate materials play an increasingly significant role in various industries, such as pharmaceutical manufacturing, food, mining, and civil engineering. The objective of this research is to better understand bulk behaviors of particulate materials from particle scale simulations.

Packing properties of assembly of particles are investigated first, focusing on the effects of particle size, surface energy, and aspect ratio on the coordination number, porosity, and packing structures. The simulation results show that particle sizes, surface energy, and aspect ratio all influence the porosity of packing to various degrees. The heterogeneous force networks within particle assembly under external compressive loading are investigated …

3d Immersive Visualization: Expanding Human Sensation, Megan Davis, Francisco Gonzalez, Connor Waters

Capstone Design Expo Posters

Unmet Need: The constant push for better and more interactive data visualization aids: the Oculus Rift replaced a two-dimensional fixed monitor with head tracking and a three-dimensional virtual space to explore; the Novint Falcon replaces two-dimensional pointing tools with a haptic sensor with force feedback and three degrees of axial freedom.

Deliverables: A demonstration of the technologies involved, in the form of an Oculus- and Falconenabled physical simulation of a room containing several objects that can be handled and manipulated in three dimensions.

Constraints: The hardware is expensive and difficult to acquire, and it requires a beefy computer to run. …

Modeling And Simulation Of Optical Properties Of Noble Metals Triangular Nanoprisms, Soad Zahir Alsheheri

Electronic Theses and Dissertations

Gold and silver has gained huge attention across the scientific community for its applications arising from its plasmonic properties. The optical properties achieved by these materials via excitation of plasmons is very unique to these materials and used as diagnostic and therapeutic agents in the field of medicine, and as sensors in a gamut of disciplines such as energy and environmental protection to name a few. Surface plasmon resonance (SPR) properties of the gold and silver are size and shape dependent. Of the various shapes reported in literature, triangular nanoprisms has tunable optical properties in the visible and near IR …

Cepsim: Modelling And Simulation Of Complex Event Processing Systems In Cloud Environments, Wilson A. Higashino, Miriam Am Capretz, Luiz F. Bittencourt

Electrical and Computer Engineering Publications

The emergence of Big Data has had profound impacts on how data are stored and processed. As technologies created to process continuous streams of data with low latency, Complex Event Processing (CEP) and Stream Processing (SP) have often been related to the Big Data velocity dimension and used in this context. Many modern CEP and SP systems leverage cloud environments to provide the low latency and scalability required by Big Data applications, yet validating these systems at the required scale is a research problem per se. Cloud computing simulators have been used as a tool to facilitate reproducible and repeatable …

3d Infrastructure Condition Assessment For Rail Highway Applications, Teng Wang

Theses and Dissertations--Civil Engineering

Highway roughness is a concern for both the motoring public and highway authorities. Roughness may even increase the risk of crashes. Rail-highway grade crossings are particularly problematic. Roughness may be due to deterioration or simply due to the way the crossing was built to accommodate grade change, local utilities, or rail elevation. With over 216,000 crossings in the US, maintenance is a vast undertaking. While methods are available to quantify highway roughness, no method exists to quantitatively assess the condition of rail crossings. Conventional inspection relies on a labor-intensive process of qualitative judgment. A quantifiable, objective and extensible procedure for …

A Dielectric Rod Antenna For Picosecond Pulse Stimulation Of Neurological Tissue, Ross A. Petrella, Karl H. Schoenbach, Shu Xiao

Bioelectrics Publications

A dielectrically loaded wideband rod antenna has been studied as a pulse delivery system to subcutaneous tissues. Simulation results applying 100-ps electrical pulse show that it allows us to generate a critical electric field for biological effects, such as brain stimulation, in the range of several centimeters. In order to reach the critical electric field for biological effects, which is similar to 20 kV/cm, at a depth of 2 cm, the input voltage needs to be 175 kV. The electric field spot size in the brain at this position is similar to 1 cm(2). Experimental studies in free space with …

Design & Analysis Of A Computer Experiment For An Aerospace Conformance Simulation Study, Ryan W. Gryder

Theses and Dissertations

Within NASA's Air Traffic Management Technology Demonstration # 1 (ATD-1), Interval Management (IM) is a flight deck tool that enables pilots to achieve or maintain a precise in-trail spacing behind a target aircraft. Previous research has shown that violations of aircraft spacing requirements can occur between an IM aircraft and its surrounding non-IM aircraft when it is following a target on a separate route. This research focused on the experimental design and analysis of a deterministic computer simulation which models our airspace configuration of interest. Using an original space-filling design and Gaussian process modeling, we found that aircraft delay assignments …

Team Training In Safety And Security Via Simulation : A Practical Dimension Of Maritime Education And Training, Michael Baldauf, Dimitrios Dalaklis, Aditi Kataria

Conference Papers

In the rather extended maritime domain, a term that should be the epicentre of any successful careerbuilding path is tailor-made training via cutting-edge simulators. To cut a long story short, the breadth of operations on the various types of ships has expanded to such a large extent that extensive practical training drills are becoming a compelling need to contribute to competent seafarers. This type of training can guarantee the positive outcome in their decision-making process and help the seafarers often being under continuous pressure, to suitably respond to the various safety and security threats on-board a vessel. The several conventions …

Understanding The Effect Of Extrusion Processing Parameters On Physical, Nutritional And Rheological Properties Of Soy White Flakes Based Aquafeed In A Single Screw Extruder, Sushil Kumar Singh

Electronic Theses and Dissertations

The rapid expansion of aquaculture has increased the demand for aquafeed. As fishmeal is expensive, alternative plant based protein sources such as soybean has shown to be a good alternative for aquafeed production. The present study was done to investigate the effect of soy white flakes (SWF) as an alternative source of protein in the production of aquaculture feed through extrusion processing. Ingredient blends containing different levels of SWF along with distiller dried grains, corn flour, corn gluten meal, fish meal, vitamin and mineral mix with net protein adjusted to 32% protein were formulated. The ingredient blends were extruded in …

The Next Generation Of Wireless Cyber-Physical Simulator, Xinghan Wang, Kevin Xu

Undergraduate Research Symposium Posters

In order to make Wireless Cyber-Physical Simulator(WCPS) more accessible to people in the research community, and also to improve its accuracy of representing real industrial models, we worked on the dockerization of WCPS, and implemented the multi-rate feature for WCPS, enabling the simulator to have different network rate and plant rate when running a simulation. We created a new version of WCPS by dockerizing run-time libraries and the TOSSIM server and also embedding the multi-rate feature in the old version. This report includes the introduction and dockerization of WCPS, and shows the results of using the new generation of WCPS …

Simulation Of Gan Based Mis Varactor, Bojidha Babu

Theses and Dissertations

This work deals with novel microwave switches based on III-Nitride varactors. RF switches, power limiters and other control devices are important components of various RF systems, such as wireless modules of laptops, tablets, cell phones etc., satellites communication systems, radars, multi-band wireless and aerospace communications, phased array antennas and so worth. Traditional RF switches are fabricated using pin diodes or MEMS, Si MOSFETs or GaAs HEMTs. These devices have a number of fundamental limitations. Si or GaAs based devices suffer from a low breakdown voltage and cannot handle high RF power. Pin-diodes require large forward currents and do not allow …

Applications Of Impedance Identification To Electric Ship System Control And Power Hardware-In-The-Loop Simulation, Jonathan Siegers

Theses and Dissertations

Recent advances in semiconductor technology, controls, and switching converter topologies have resulted in the increasing application of power electronics in power distribution systems. Power electronic enabled distribution systems have inspired a renewed interest in DC distribution architectures as an appealing alternative to traditional AC methods due to the significant performance and efficiency gains they offer. However, the notional power electronic based DC distribution system is a complex and extensively interconnected system consisting of multiple power converters. As a result, a number of system-level challenges related to stability arise due to interaction among multiple power converters. In addition, the power distribution …

A Meta-Architecture Analysis For A Coevolved System-Of-Systems, George Anthony Muller Iv

Masters Theses

"Modern engineered systems are becoming increasingly complex. This is driven in part by an increase in the use of systems-of-systems and network-centric concepts to improve system performance. The growth of systems-of-systems allows stakeholders to achieve improved performance, but also presents new challenges due to increased complexity. These challenges include managing the integration of asynchronously developed systems and assessing SoS performance in uncertain environments.

Many modern systems-of-systems must adapt to operating environment changes to maintain or improve performance. Coevolution is the result of the system and the environment adapting to changes in each other to obtain a performance advantage. The complexity …

Simulation Of Scalability For Autonomous Mobile Microgrids, Nathan Beyers

Dissertations, Master's Theses and Master's Reports

Microgrids are small-scale, decentralized systems for generation, storage, and management of electricity to provide power within a local area. By establishing these microgrids using autonomous robots, they can be made safer and more easily reconfigurable. This thesis presents a plan and outlines the infrastructure needed for scaling up previous experimental work on such systems. This work brings together a variety of tools in the form of both software and hardware to set the stage for how further development can be completed. An architecture for physical testing has been built to validate the full potential of navigation and making electrical connections …

Optimal Energy Management System For A Net Zero Building Using Multi-Agent Systems Approach, Arzhang Ghassemi Pashakalaei

Open Access Theses & Dissertations

Buildings have a significant impact on energy usage and the environment. Much of the research in architectural sustainability has centered on economically advanced countries because they consume the most energy and have the most resources. However, sustainable architecture is important in developing countries, where the energy consumption of the building sector is increasing significantly. The aims of this Thesis are investigating using the hybrid system, which formed by interconnecting two source of renewable energy as solar (PV arrays) and wind (turbine) along with city grid for compensation purposes wherever it is required. In this Thesis, after literature review, we consider …

Torque Accuracy Improvement Via Explicit Torque Feedback Control For Internal Combustion Spark Ignition Engines, Anwar Alkeilani

Wayne State University Dissertations

At the present time, both control and estimation accuracies of engine torque are causes for under-achieving optimal drivability and performance in today’s production vehicles. The major focus in this area has been to enhance torque estimation and control accuracies using existing open-loop torque control and estimation structures. Such an approach does not guarantee optimum torque tracking accuracy and optimum estimation accuracy due to air flow and efficiencies estimations errors. Furthermore, current approach overlooks the fast torque path tracking which does not have any related feedback. Recently, explicit torque feedback control has been proposed in the literature using either estimated or …