Engineering Commons^™

Micro- And Macro-Scale Modeling Of Filter Aging: Effects Of Particle Poly-Dispersity And Fiber Cross-Sectional Shape, Ahmed M. Saleh

Theses and Dissertations

The goal of this study is to further advance the state of the art in developing self-sufficient methods to predict the performance of an aerosol filter. The simulation methods developed in this study are based on first principles and consequently, they do not rely on empirical correction factors. These simulation methods can be used to predict the instantaneous collection efficiency and pressure drop of a filter under dust-loading conditions. In the current study, 3-D micro- and macroscale CFD models are developed to simulate the service life of flat-sheet and pleated filters. These CFD micro- and macroscale models are also used …

Adaptive Network-Based Inference System Models On Multiband Patch Antenna Design, Erdem Demi̇rci̇oğlu, Murat Hüsnü Sazli, Orhan Şengül, Şehabeddi̇n Taha İmeci̇, Hakki Alparslan Ilgin

Turkish Journal of Electrical Engineering and Computer Sciences

In this study, an adaptive network-based fuzzy inference system (ANFIS) for multiband microstrip patch antenna (MMPA) modeling is proposed. The MMPA includes a single patch with inverted L-shaped stubs on the edges. The antenna production process needs iterative runs of the electromagnetic (EM) simulator, fabricating and testing the simulated antenna to find the optimum geometry. Production processes (design, simulation, fabrication, and testing) and the cost computation time add to the overall manufacturing expenses. A computer-aided modeling approach using the ANFIS is developed and trained with data acquired from the EM simulators, Sonnet Suites and AWR AXIEM, and measurement data. The …

Self-Assembly Kinetics Of Microscale Components: A Parametric Evaluation, Jose Miguel Carballo

USF Tampa Graduate Theses and Dissertations

The goal of the present work is to develop, and evaluate a parametric model of a basic microscale Self-Assembly (SA) interaction that provides scaling predictions of process rates as a function of key process variables. At the microscale, assembly by “grasp and release” is generally challenging. Recent research efforts have proposed adapting nanoscale self-assembly (SA) processes to the microscale. SA offers the potential for reduced equipment cost and increased throughput by harnessing attractive forces (most commonly, capillary) to spontaneously assemble components. However, there are challenges for implementing microscale SA as a commercial process. The existing lack of design tools prevents …

Fickian-Based Empirical Approach For Diffusivity Determination In Hollow Alginate-Based Microfibers Using 2d Fluorescence Microscopy And Comparison With Theoretical Predictions, Maryam Mobed-Miremadi, Sabra Djomehri, Mallika Keralapura, Melanie Mcneil

Bioengineering

Hollow alginate microfibers (od = 1.3 mm, id = 0.9 mm, th = 400 µm, L = 3.5 cm) comprised of 2% (w/v) medium molecular weight alginate cross-linked with 0.9 M CaCl₂ were fabricated to model outward diffusion capture by 2D fluorescent microscopy. A two-fold comparison of diffusivity determination based on real-time diffusion of Fluorescein isothiocyanate molecular weight (FITC MW) markers was conducted using a proposed Fickian-based approach in conjunction with a previously established numerical model developed based on spectrophotometric data. Computed empirical/numerical (D_empiricial/D_numerical) diffusivities characterized by small standard deviations for the 4-, 70- and …

Manipulation Of Light In Plasmonic Nano-Structures, Rehab Kotb Abd-Allah

Theses and Dissertations

Manipulating light at nano-scale is usually shadowed by the diffraction limit. Recently, plasmonics have emerged as a new technology that enables confining light at nano-scale. Using plasmonic structures, photonic devices can be shrunk from the micro-scale to the nano-scale. In this thesis, a novel structure to a plasmonic nano-filter is introduced and analyzed. The proposed nano-resonator has low loss, compact size and good sensing characteristics. A closed form model to the filter behavior is developed. The model is extracted from the waveguide physical parameters and provides a physical insight into the structure of the filter. An analytical model to the …

Added Mass Computation For Control Of An Open-Frame Remotely-Operated Vehicle: Application Using Wamit And Matlab, You-Hong Eng, Cheng-Siong Chin, Michael Wai-Shing Lau

Journal of Marine Science and Technology–Taiwan

In this paper, numerical modeling and testing of a complexshaped remotely-operated vehicle (ROV) are shown. The paper emphasizes on systematic modeling of hydrodynamic added mass using computational fluid dynamic software WAMITTM on the open frame ROV that is not commonly applied in practice. From initial design and prototype testing, a small-scale test using a free-decaying experiment is used to verify the theoretical models obtained from WAMITTM. Simulation results have shown to coincide with the experimental tests. The proposed method is able to determine the hydrodynamic added mass coefficients of the open frame ROV.

Oxygen Flux And Dielectric Response Study Of Mixed Ionic-Electronic Conducting (Miec) Heterogeneous Functional Materials, Fazle Rabbi

Theses and Dissertations

Dense mixed ionic-electronic conducting (MIEC) membranes consisting of ionic conductive perovskite-type and/or fluorite-type oxides and high electronic conductive spinel type oxides, at elevated temperature can play a useful role in a number of energy conversion related systems including the solid oxide fuel cell (SOFC), oxygen separation and permeation membranes, partial oxidization membrane reactors for natural gas processing, high temperature electrolysis cells, and others. This study will investigate the impact of different heterogeneous characteristics of dual phase ionic and electronic conductive oxygen separation membranes on their transport mechanisms, in an attempt to develop a foundation for the rational design of such …

Forecasting Corrosion Of Steel In Concrete Introducing Chloride Threshold Dependence On Steel Potential, Andrea Nathalie Sanchez

USF Tampa Graduate Theses and Dissertations

Corrosion initiates in reinforced concrete structures exposed to marine environments when the chloride ion concentration at the surface of an embedded steel reinforcing bar exceeds the chloride corrosion threshold (CT) value. The value of CT is generally assumed to have a conservative fixed value ranging from 0.2% to - 0.5 % of chloride ions by weight of cement. However, extensive experimental investigations confirmed that CT is not a fixed value and that the value of CT depends on many variables. Among those, the potential of passive steel embedded in concrete is a key influential factor on the value of CT …

Measurement And Modeling Of Fire Behavior In Leaves And Sparse Shrubs, Dallan R. Prince

Theses and Dissertations

Wildland fuels and fire behavior have been the focus of numerous studies and models which provide operational support to firefighters. However, fuel and fire complexity in live shrubs has resulted in unexpected and sometimes aggressive fire behavior. The combustion of live fuels was studied and modeled, and the results were assimilated into a shrub-scale fire behavior model which assumes fire spread by flame-fuel overlap. Fire spread models have usually assumed that radiation heat transfer is responsible for driving fire spread, but that assumption is a topic of continuing debate, and appears to contradict some experimental observations. A convection-based shrub-scale fire …

Modeling-As-A-Service (Maas) Using The Cloud Services Innovation Platform (Csip), Olaf David, Wes Lloyd, Ken Rojas, Mazdak Arabi, Frank Geter, James Ascough, Tim Green, G. Leavesley, Jack Carlson

International Congress on Environmental Modelling and Software

Cloud infrastructures for modelling activities such as data processing, performing environmental simulations, or conducting model calibrations/optimizations provide a cost effective alternative to traditional high performance computing approaches. Cloud-based modelling examples emerged into the more formal notion: "Model-as-a-Service" (MaaS). This paper presents the Cloud Services Innovation Platform (CSIP) as a software framework offering MaaS. It describes both the internal CSIP infrastructure and software architecture that manages cloud resources for typical modelling tasks, and the use of CSIP's "ModelServices API" for a modelling application. CSIP's architecture supports fast and resource aware auto-scaling of computational resources. An example model service is presented: the …

Interactive Web-Based Flood Modeling At Country Wide Scale And Plantar Size Resolution, Fedor Baart, Jack Ha, Arthur Van Dam, Gennadii Donchyts, Martijn Siemerink

International Congress on Environmental Modelling and Software

The flooding of rural and urban areas is an increasing hazard to society. Accurate and timely predictions are essential for the water manager to prepare and respond to these hazards. Predicting flooding requires a numerical model that represents the physical processes (rain, evaporation, infiltration, overland flow, groundwater flow). This model, fed with measurements, and possible measures, calculates the expected flooding. The traditional working method consists of a three step process: schematization setup, running and post-processing, with a total feedback time of hours. This process is suitable for confirmatory modeling. Most of the time, models are applied exploratory, requiring a different …

Slides: Understanding The Impacts: Issues Of Research, Cindy Beeler

Water and Air Quality Issues in Oil and Gas Development: The Evolving Framework of Regulation and Management (Martz Summer Conference, June 5-6)

Presenter: Cindy Beeler, U.S. Environmental Protection Agency, Denver, CO

10 slides

Stress Corrosion Cracking In Polymer Matrix Glass Fiber Composites, Jonathan Kosak

Electronic Theses and Dissertations

With the use of Polymer Matrix Glass Fiber Composites ever expanding, understanding conditions that lead to failure before expected service life is of increasing importance. Stress Corrosion Cracking (SCC) has proven to be one such example of conditions found in use in high voltage transmission line applications that leads to brittle fracture of polymer matrix composites.

SCC has been proven to be the result of acid buildup on the lines due to corona discharges and water buildup. This acid leaches minerals from the fibers, leading to fracture at low loads and service life. In order to combat this problem, efforts …

A Simulation Protocol For Exercise Physiology In Fontan Patients Using A Closed Loop Lumped-Parameter Model, Ethan Kung, Giancarlo Pennati, Francesco Migliavacca, Tian-Yen Hsia, Richard Figliola, Alison Marsden, Alessandro Giardini

Publications

Background: Reduced exercise capacity is nearly universal among Fontan patients, though its etiology is not yet fully understood. While previous computational studies have attempted to model Fontan exercise, they did not fully account for global physiologic mechanisms nor directly compare results against clinical and physiologic data. Methods: In this study, we developed a protocol to simulate Fontan lower-body exercise using a closed-loop lumped-parameter model describing the entire circulation. We analyzed clinical exercise data from a cohort of Fontan patients, incorporated previous clinical findings from literature, quantified a comprehensive list of physiological changes during exercise, translated them into a computational model …

No And No2 Modeling For Diesel Oxidation Catalyst At Different Thermal Aging Levels, Keqin Zhou

Open Access Theses

Different DOC modeling methods are analyzed and compared. Detailed reaction mechanisms of DOC reaction are discussed and a new NO and NO2 modeling technique is proposed. Experiments are conducted measuring downstream DOC NO and NOx . DOC out NO and NO2 concentrations are modeled as a function of DOC temperature. A robust model is built such that with the input of real time NOx and DOC temperature information, DOC-out NO and NO2 concentrations can be precisely predicted.

As is true with many catalysts, the DOC thermally ages as it operates, which reduces the thermal effectiveness level of the catalyst. This …

A One-Dimensional Model Of A Closed-Loop Refrigeration Test Block For Centrifugal Compressors, Paul D. Gessler

Master's Theses (2009 -)

The increasingly competitive building equipment and control industry pushes manufacturers to continually improve the performance and efficiency of their products to develop and maintain a competitive edge. Compressor development is an expensive endeavor, but the cost and time required for testing can be minimized by developing a model of the compressor test block to predict its behavior with a given prototype compressor at specified operating conditions. This thesis presents a thermodynamic model of a hot gas bypass test block used to evaluate centrifugal compressor performance at a compressor development facility. The test block uses cooling towers to reject the heat …

Computer Modeling And Simulation Of Implantable Medical Device Heating Due To Mri Gradient Coil Fields, Bryan David Stem

Open Access Theses

For patients with implantable medical devices, the ability to safely undergo MRI scanning is critical to ensuring the highest standard of care. The gradient coils of an MRI generate kilohertz frequency, time varying magnetic fields. These magnetic fields induce a voltage on the external case of metallic, implantable medical devices through electromagnetic induction. Since the magnetic field generated by a gradient coil is time varying, the induced voltage results in the flow of eddy currents which can cause heating effects. These heating effects have been successfully modeled using ANSYS Maxwell and ANSYS Mechanical software packages.

The multi-physics simulation and solution …

Fema Region Iii Coastal Flood Study - Hampton Roads Adaptation Forum, Robin Danforth

March 28, 2014: Addressing Current and Future Vulnerability through Floodplain Management

No abstract provided.

Analyses Of Groundwater Contribution To A Riverine Wetland, Farzad Mahmoodinobar

Dissertations

Rainfall, runoff, overbank flow and groundwater, all contribute water to wetlands. Each transport element is associated with unique modeling approaches and uncertainties. Transpiration is perhaps the hardest to quantify as it is subject to all the variability of plant growth. Transpiration causes land area to lose moisture and the loss amount depends on precipitation incidence, the temperature and type and extent of vegetation. Plants can intercept virtually all recharge during the growing season and almost none from late fall to early spring in northeastern United States. Thus, an improvement in the transpiration element can contribute considerably to an improved groundwater …

Engineering Collaborations In Medical Modeling And Simulation, Frederic D. Mckenzie, Salim Chemlal, Tom Hubbard, Robert E. Kelly, Roderick C. Borgie, David A. Besachio, Michel Audette

Computational Modeling & Simulation Engineering Faculty Publications

Fifty years ago computer science was just beginning to see common acceptance as a growing discipline and very few universities had a computer science department although other departments were utilizing computers and software to enhance their methodologies. We believe modeling and simulation (M&S) is on a similar path. Many other disciplines utilize M&S to enhance their methodologies but we also believe that M&S fundamentals can be essential in making better decisions by utilizing the appropriate model for the problem at hand, expanding the solution space through simulation, and understanding it through visualization and proper analyses. After our students learn these …

Numerical Investigation Of Boiling In A Sealed Tank In Microgravity, Sonya Lynn Hylton

ETD Archive

NASA's missions in space depend on the storage of cryogenic fluids for fuel and for life support. During long-term storage, heat can leak into the cryogenic fluid tanks. Heat leaks can cause evaporation of the liquid, which pressurizes the tank. However, when the tanks are in a microgravity environment, with reduced natural convection, heat leaks can also create superheated regions in the liquid. This may lead to boiling, resulting in much greater pressure rises than evaporation at the interface between the liquid and vapor phases. Models for predicting the pressure rise are needed to aid in developing methods to control …

Modeling And Fault Detection In Dc Side Of Photovoltaic Arrays, Mohd Akram

Electronic Theses and Dissertations

Fault detection in PV systems is a key factor in maintaining the integrity of any PV system. Faults in photovoltaic systems can cause irrevocable damages to the stability of the PV system and substantially decrease the power output generated from the array of PV modules. Among'st the various AC and DC faults in a PV system, the clearance of the AC side faults is achieved by conventional AC protection schemes,the DC side, however , there still exists certain faults which are difficult to detect and clear. This paper deals with the modeling, detection and classification of these types of DC …

Model-Based Energy Analysis Of An Integrated Midrex-Based Iron/Steel Plant, Abdelhamid M. Ajbar, Khalid I. Alhumaizi, Moustafa A. Soliman, Emadadeen Ali

Chemical Engineering

This article presents modeling and simulations of an integrated plant for the production of steel using the direct reduced iron (DRI)=electric arc furnace (EAF) route. In a previous work (Alhumaizi et al., 2012), a comprehensive mathematical model of an iron plant based on MIDREX technology was developed, validated, and simulated. In this article, the model is extended to account for an empirical model of an EAF plant. Numerical simulations were carried out for the effect of different operating parameters of the integrated plant. Useful profiles as well as a summary table were compiled to illustrate the results of the sensitivity …

Role Of Solids Retention Time On Complete Nitrification: Mechanistic Understanding And Modeling, Guoqiang Liu, Jianmin Wang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Effects of solids retention time (SRT) on both steps of the nitrification process (e.g., ammonia oxidation and nitrite oxidation) and the nitrifier community in a complete-mix activated sludge process were studied. At a SRT less than or equal to 20 days, the effluent ammonia concentration was lower than the effluent nitrite concentration. At the 40-day SRT, however, the effluent nitrite concentration became equal to or less than the effluent ammonia concentration. Quantitative Polymerase Chain Reaction (QPCR) assays indicated that increasing SRT significantly increased nitrite-oxidizing bacteria/ammonia-oxidizing bacteria (NOB/AOB) ratio. Further investigation indicated that Nitrosomonas europaea/eutropha were the dominant AOB for ammonia …

A Tutorial On Learning Human Welder's Behavior: Sensing, Modeling, And Control, Y. K. Liu, W. J. Zhang, Yu Ming Zhang

Electrical and Computer Engineering Faculty Publications

Human welder's experiences and skills are critical for producing quality welds in manual GTAW process. Learning human welder's behavior can help develop next generation intelligent welding machines and train welders faster. In this tutorial paper, various aspects of mechanizing the welder's intelligence are surveyed, including sensing of the weld pool, modeling of the welder's adjustments and this model-based control approach. Specifically, different sensing methods of the weld pool are reviewed and a novel 3D vision-based sensing system developed at University of Kentucky is introduced. Characterization of the weld pool is performed and human intelligent model is constructed, including an extensive …

Design And Development Of Heterogenous Combustion Systems For Lean Burn Applications, Anthony Terracciano

Electronic Theses and Dissertations

Combustion with a high surface area continuous solid immersed within the flame, referred to as combustion in porous media, is an innovative approach to combustion as the solid within the flame acts as an internal regenerator distributing heat from the combustion byproducts to the upstream reactants. By including the solid structure, radiative energy extraction becomes viable, while the solid enables a vast extension of flammability limits compared to conventional flames, while offering dramatically reduced emissions of NOx and CO, and dramatically increased burning velocities. Efforts documented within are used for the development of a streamlined set of design principles, and …

Measuring Security: A Challenge For The Generation, Janusz Zalewski, Steven Drager, William Mckeever, Andrew J. Kornecki

Department of Electrical Engineering and Computer Science - Daytona Beach

This paper presents an approach to measuring computer security understood as a system property, in the category of similar properties, such as safety, reliability, dependability, resilience, etc. First, a historical discussion of measurements is presented, beginning with views of Hermann von Helmholtz in his 19th century work “Zählen und Messen”. Then, contemporary approaches related to the principles of measuring software properties are discussed, with emphasis on statistical, physical and software models. A distinction between metrics and measures is made to clarify the concepts. A brief overview of inadequacies of methods and techniques to evaluate computer security is presented, followed by …

Design Of A Double-Stator Linear Switched Reluctance Motor For Shunting Railway Channels, El Manaa Barhoumi, Mansour Hajji, Boujemaa Ben Salah

Turkish Journal of Electrical Engineering and Computer Sciences

This paper presents the design and modeling of a double-stator linear switched reluctance motor for motorizing a railway channels' shunting system. The magnetic behavior of this actuator is nonlinear due to the saturation and nonlinear magnetization curves of the materials used in this actuator. For this reason, the electromagnetic quantities such as force, flux linkage, and inductance are calculated with the finite element method using the Maxwell tool. The obtained results are presented and discussed. In order to elaborate some control strategies, a new model for the proposed actuator, based on the flux and force characteristics, is validated by the …

Understanding Chassis Inputs From The Rear Suspension Of A Snowmobile, Jamie L. Kleinendorst

Dissertations, Master's Theses and Master's Reports - Open

Today’s snowmobile industry faces great challenges in the field of noise & vibration. The area of main concern is the pass-by noise restriction defined by the Society of Automotive Engineers (SAE) test standard J192, with a maximum sound pressure level of 78 dB(A) being required by many states and national parks. To continue meet or beat this requirement without effecting machine performance, a deeper understanding of the sound transfer paths is required. This thesis examines the transfer paths created by the tunnel, rear suspension, drive shaft, and rubber composite track, with the primary source being suspension input through the ground. …

The Effects Of Asymmetric Micro Ratchets On Pool Boiling Performance, Lance Austin Brumfield

LSU Doctoral Dissertations

Nucleate boiling is an attractive method for achieving high heat flux at low superheat temperatures. It is frequently used for industrial applications such as heat exchangers and is being considered to cool advanced central processing units (CPU) which produce heat fluxes on the order of 1 MW/m2 and are becoming increasingly less efficient to cool via forced conduction of air. The issue with implementing nucleate boiling as a cooling mechanism lies in the difficulty of quantifying the numerous and complex mechanisms which control the process. A comprehensive nucleate boiling model has yet to be formulated and will be required in …