Engineering Commons^™

Wetting Properties Of Structured Interfaces Composed Of Surface-Attached Spherical Nanoparticles, Bishal Bhattarai

Browse all Theses and Dissertations

In this thesis, the effects of the external pressure and surface energy on stability and wetting transition at nanotextured interfaces are studied using molecular dynamics and continuum simulations. The surface roughness of the composite interface is modeled via an array of spherical nanoparticles with controlled wettability. It was found that in the absence of external pressure, the liquid interface is flat and its location relative to the solid substrate is determined by the radius of the particle and the local contact angle. With increasing pressure on the liquid film, its interface becomes more curved and the three-phase contact line is …

Resonant Gate-Drive Circuits For High-Frequency Power Converters, Hur Jedi

Browse all Theses and Dissertations

The development trend of power converters motivates the pursuit with high density, high efficiency, and low cost. Increasing the frequency can improve the power density and lead to small passive elements and a fast dynamic response. Each one of these power converters must be driven by a gate-drive circuit to operate efficiently. Conventional gate-drivers are used up to frequencies of about 5 MHz and suffer from switching losses. Therefore, the development of switch-mode power supplies (SMPS) operating at high frequencies requires high-speed gate drivers. The presented research in this dissertation focuses on analysis, design, and development of new types of …

The Rhetoric Of Science Education And Technology, Iwasan D. Kejawa

School of Computing: Faculty Publications

Nearly thousands of science experiments are performed both on humans and animals every year in the United States (Gregory, 1999). Does Science enormously play a role in the well-beings of individual in the society? Research has found that science education is through motivation and satisfying the needs of humans. The scientific world is part of an elongated human development. This can be substantiated with the use and evolution of TECHNOLOGY and SCIENCE (Minton, 2004). Education of the entities that comprise the need to achieve the goal of TECHNOLOGY and SCIENCE which are important issues of today. Research has shown that …

Unlv Enrollment Analysis, Alexis Acosta, Juan Brena, Chaitanya Ingle, Ajanae' Williams

Math 365 Class Projects

What will be the future enrollment for UNLV between 2021 to 2025? What will be the future enrollment for the College of Engineering between 2021 and 2025?

The Pattern Of Sensory Axonal Endings Together With Synaptic Transmission Influence The Development Of Proprioceptive Circuits In The Spinal Cord, Yiyun Dai

Browse all Theses and Dissertations

Proprioceptive circuits provide information regarding limb position and movement status, and are essential to producing correctly executed motor behaviors. Exploring the mechanisms underlying the formation of proprioceptive circuits is therefore critical for understanding neurological disorders with altered motor coordination and for restoring circuits damaged by injury. One important proprioceptive circuit, the stretch reflex circuit, is formed between proprioceptive sensory neurons (PSNs) and motor neurons (MNs) that innervate the same muscle. Progress has been made in understanding the spatial organization of MNs based on their muscle-specific subpopulation identities, which contributes to the specificity of stretch reflex circuit formation. However, whether PSNs …

Electroceutical Therapy In Amyotrophic Lateral Sclerosis: A Novel Preliminary Study, Morgan Michelle Highlander

Browse all Theses and Dissertations

Amyotrophic Lateral Sclerosis (ALS) is a fatal, neurodegenerative disease that is characterized by the death of motoneurons. Life expectancy is only 3-5 years from diagnosis and current treatments only extend survival by 2-3 months. The mechanism of motoneuron death in ALS is still largely unknown, but abnormal motoneuron excitability has been extensively documented. Because the intrinsic excitability of a motoneuron is a defining measure of its normal function, characterizing and regulating motoneuron excitability has become one of the primary aims of ALS research. Although not previously explored in ALS, other clinical applications show the ability of certain electroceutical techniques to …

Regulation Of The Motor Output Of The Spinal Cord: Burst Firing Generation And Sensorimotor Integration, Amr A. Mahrous

Browse all Theses and Dissertations

Spinal motoneurons are the final common path for motor signals. Thus, the firing activity recorded from spinal motoneurons or their axons in the ventral roots represents the motor output of the nervous system. This dissertation investigates two major phenomena that help generate and shape the neuronal motor output. Specialized groups of spinal neurons called central pattern generators (CPGs) are capable of orchestrating rhythmic bursting activity without involvement of the brain. This activity underlies stereotyped movements such as locomotion. If known, the ionic mechanisms responsible for generating this activity can offer new pharmacological interventions to restore walking in paralyzed patients with …

Consequences Of Trpm7 Kinase Inactivation In Immune Cells, Pavani Beesetty

Browse all Theses and Dissertations

The characteristic feature of ubiquitously expressed transient receptor potential melastatin 7 (TRPM7) protein is the presence of a C-terminal atypical kinase domain fused to a cation channel domain. Even though this protein has been implicated in a number of physiological and pathological processes, the mechanisms regulating TRPM7 channel activity are poorly understood. In the present study, regulation of TRPM7 channel by its kinase activity was investigated using the TRPM7 kinase-dead knock-in mouse (KD mouse). These mice have a point mutation Lys1646Arg in the kinase region abrogating the kinase activity. Examining TRPM7 channel activity in KD peritoneal macrophages revealed that TRPM7 …

Steady-State And Small-Signal Modeling Of A-Source Converter, Agasthya Ayachit

Browse all Theses and Dissertations

As the trend towards vehicle electrification, renewable energy, smart systems is increasing, the key enabling technology such as power electronics are becoming ever more important. Power electronics is the vital component of many applications in automotive, computer, data-centers, medical, aerospace, communication, green-energy, and manufacturing sectors. Major advancements in high efficiency, high power density, high voltage conversion ratio, and fast dynamic response power-electronic converters is evident both in research and industry, particularly at the topology level. A major contribution of this dissertation is the analysis, design, development, and dynamic modeling of a novel impedance-source topology termed as A-source converter, which potentially …

Characterization And Design Of Voltage-Mode Controlled Full-Bridge Dc/Dc Converter With Current Limit, Nathaniel R. Smith

Browse all Theses and Dissertations

Advancements in Direct Current (DC) electrical power systems have enabled new functionality in many, varied applications. Discrete power semiconductor devices are increasing in efficiency, switching frequency, and power density, resulting in greater usage of DC power management and distribution methods, including DC/DC conversion. DC distribution lacks inherent capability to safely and effectively break fault current, particularly in mobile solutions, where larger and slower electromechanical switching devices are not optimal or feasible. One solution is to design a low-energy breaking point into a switching power supply. Simpler converter designs, with a lower number of switching devices, have been modeled and can …

Effect Of Process Parameters On The Surface Roughness And Mechanical Performance Of Additively Manufactured Alloy 718, Bo Ryan Whip

Browse all Theses and Dissertations

Metal additive manufacturing (AM) is a method to create complex components in a layer-by-layer process. Currently, there is a lack of understanding in the processing-structure-properties-performance relationship, particularly related to defects inherent to the AM process. This work investigates the relationship of process parameters, as-built surface roughness, and mechanical performance for nickel-based superalloy 718 built using laser powder bed fusion. The surface roughness of components built using varied processing parameters was characterized using both nondestructive and destructive measurement techniques. Finite element analysis was used to study the stress concentration on surface profiles. Statistical correlations are presented between contour processing parameters and …

The Par-Fect Stream: Indian Creek Restoration At Indian Trails Golf Course, Joe Jackson, Ben Vandyk, Heidi Boeve, Kyle Vandeweert

Student Papers and Reports

Indian Creek, a tributary to Plaster Creek flows through Indian Trails Golf Course. During rainfall events, the 1000 acre watershed, consisting of mostly impervious surfaces collects rainfall and sends it into Indian Creek.

Trochoidal Milling Of Alsicp With Cvd Diamond Coated End Mills, Tony Nguyen

University of the Pacific Theses and Dissertations

Metal matrix composites have seen a rise in demand within the last decade. Aluminum alloy reinforced with silicon carbide particles is a type of particle metal matrix composite that has seen applications in the aerospace, ground transportation, and electronics industry. However, the abrasive SiC particles have made this material difficult to machine through conventional machining strategies. This research will focus on using computer aided manufacturing with trochoidal tool paths to maximize machining productivity and extend the tool life of CVD diamond coated end mills. The focus of this research will be on AlSiCp with a high volume fraction of reinforcement …

Infographic: Institutional Barriers To Black And Latino Male Collegians’ Success In Engineering And Related Stem Fields, Leroy L. Long Iii, William Wanyagah

Publications

Infographic was created to support the article Institutional Barriers to Black and Latino Male Collegian's Success in Engineering and Related Stem Fields, which can be read here:

Examining Engineering Design Cognition With Respect To Student Experience And Performance, Greg J. Strimel, Eunhye Kim, Scott R. Bartholomew, Diana V. Cantu

Faculty Publications

This study investigated the design cognition and performance results of secondary and post-secondary engineering students while engaged in an engineering design task. Relationships between prototype performance and design cognition were highlighted to investigate potential links between cognitive processes and success on engineering design problems. Concurrent think-aloud protocols were collected from eight secondary and 12 post-secondary engineering students working individually to design, make, and evaluate a solution prototype to an engineering design task. The collected protocols were segmented and coded using a pre-established coding scheme. The results were then analyzed to compare the two participant groups and determine the relationships between …

Ultrafast Consolidation Of Bulk Nanocrystalline Titanium Alloy Through Ultrasonic Vibration, Peng Chen, W. B. Liao, Lehua Liu, F Luo, Xiaoyu Wu, Peijie Li, C Yang, M Yan, Y. J. Liu, Laichang Zhang, Zhiyuan Liu

Research outputs 2014 to 2021

Nanocrystalline (NC) materials have fascinating physical and chemical properties, thereby they exhibit great prospects in academic and industrial fields. Highly efficient approaches for fabricating bulk NC materials have been pursued extensively over past decades. However, the instability of nanograin, which is sensitive to processing parameters (such as temperature and time), is always a challenging issue to be solved and remains to date. Herein, we report an ultrafast nanostructuring strategy, namely ultrasonic vibration consolidation (UVC). The strategy utilizes internal friction heat, generated from mutually rubbing between Ti-based metallic glass powders, to heat the glassy alloy rapidly through its supercooled liquid regime, …

2017 Fall Engr333 Project Final Report (Section A), Trevor Nyeholt, Francis Kapesa, Justin Thalmayer, Erik Karlson, Kyle Van Veen, Kirk Brink, Steven Tarske, Brent Homan, Nathan De Haan, Paul Bootsma, Megan Anders, Philip Holmes, Melanie Fox, Noah Pirrotta, Abigail Berkompas, Ben Wellman, Halley Press, Christopher Greaves, Josh Templeman, Tim Bosch, Jake Zandstra, Hendrik Vermeulen

ENGR 333

Calvin College currently spends $836,000 annually on natural gas consumption. The engineering 333-A class was tasked with the question, "What would it take for Calvin College to save $75,000 per year on natural gas costs". The class was split into five groups (Boilers, Dorms and Dining Hall, Academic Buildings, Finance, and PE Complex) to research possible areas of savings. Through the class' research, it was determined that Calvin College has the potential savings of $87,000 a year through the reduction of natural gas usage.

2017 Fall Engr333 Project Final Report (Section B), Eric Ball, Mitchell Debruin, Raymond Kolocek, Edwin Kpodzro, Jacob Vandekieft, Nate Anderson, Brennan Steenhoek, Darbi Meyer, Derek Vermerris, Jessica Bouma, Devon Loerop, Reuben Saarloos, Richmond Amoh, Matthew Boelens, Tyson Butler, Laura Van Winkle, Alex Keizer, Kwame Ohemeng, Cameron Richman, Julie Van De Riet

ENGR 333

Currently, Calvin College spends $2.8M on electricity and natural gas. In the recent past Calvin has alleviated some of these costs by running a cogeneration system that combusts fuel and produces electricity and heat, this old system has since been removed due to age. With the old system removed Calvin is fully reliant on grid, leading to increased electricity cost. In addition to saving Calvin money, President Leroy formally signed the President’s Carbon Commitment that announced Calvin’s intent to be Carbon neutral by 2057. To meet both the cost and emissions saving needs, the objective of the energy savings project …

2017 Fall Engr333 Seminar Preservation, Trevor Nyeholt, Erik Karlson, Cam Richman, Tyson Butler

ENGR 333

File for student presentation, given by students in the Fall 2017 class of ENGR333.

2017 Fall Engr333 Poster (Section B), Eric Ball, Mitchell Debruin, Raymond Kolocek, Edwin Kpodzro, Jacob Vandekieft, Nate Anderson, Brennan Steenhoek, Darbi Meyer, Derek Vermerris, Jessica Bouma, Devon Loerop, Reuben Saarloos, Richard Amoh, Matthew Boelens, Tyson Butler, Laura Van Winkle, Alex Keizer, Kwame Ohemeng, Cameron Richman, Julie Van De Riet

ENGR 333

Previously, Calvin College had a cogeneration system with the purpose of generating electricity and heat, through the combustion of natural gas, for Calvin’s campus. The original co-gen system was removed in 2017 due to high costs associated with maintenance and operations. Without a co-gen system, Calvin College is fully dependent on the grid. To save money and help in the President’s Carbon Commitment, PCC, the mechanical engineering students of ENGR 333 (section B) propose the implementation of a new co-gen system.

2017 Fall Engr333 Poster (Section A), Trevor Nyeholt, Francis Kapesa, Justin Thalmayer, Erik Karlson, Kyle Van Veen, Kirk Brink, Steven Tarske, Brent Homan, Nathan De Haan, Paul Bootsma, Megan Anders, Philip Holmes, Melanie Fox, Noah Pirrotta, Abigail Berkompas, Ben Wellman, Halley Press, Christopher Greaves, Josh Templeman, Tim Bosch, Jake Zandstra, Hendrik Vermeulen

ENGR 333

Calvin College uses 161,000 MMBTU of natural gas per year, which correlates to $836,000 of annual expenses. However Calvin could save as much as $240,000 on natural gas if they were as efficient as the top performer in an energy audit of similar colleges and universities in the Midwest, conducted by Sightlines Institute. The goal of this project was to see what actions could be taken to save the college $75,000 in annual natural gas costs.

Coupling K-12 Music Education With Science, Technology, Engineering And Math (Stem) Curricula: Implementation Of A Stemusic Outreach Program, Mallory Maestri

Civil Engineering Undergraduate Honors Theses

Many studies have investigated the effects of music on evoking human emotions and diverse types of brain responses. One study by Juslin and Vastfjall indicates that hearing music can stimulate brain stem reflexes, create emotional contagion, recall episodic memories and provoke visual imagery. Due to the influence music has on human brain waves, researchers have been studying the effect of music on enhancing the spatial abilities of young students. Science, Technology, Engineering and Math (STEM) professions rely heavily on spatial skills. Research on the connection of music with spatial skills proposes that when the brain processes rhythm a “mental rotation” …

Multi-Target Extension For Beacon Foraging Methods, Christopher Sanford, Ziong Jiao, Jae Oh

Electrical Engineering and Computer Science - All Scholarship

Robotic foraging is a complex problem that encompasses both the problem of exploring an area and retrieval of targets. To solve this, biologically inspired algorithms have been proposed that handle the scenario when only one target exists, but requires extension to multiple targets. In both scenarios there exists problems of robot allocation and congestion, and we analyze ways of optimizing both allocation and minimizing congestion for our algorithms. We demonstrate the results through parameterized metrics and compare the improvements in each scenario.

This is a technical report on artificial intelligence, 2017, written by Sanford, Jiao, and Oh.

Bridge Build, Andrew Little

Student Scholarship

Bridge build design that includes not only a building process, but a research paper to make the best build possible as well.

Ncer Assistance Agreement Annual Progress Report For Grant #83582401 - Assessment Of Stormwater Harvesting Via Manage Aquifer Recharge (Mar) To Develop New Water Supplies In The Arid West: The Salt Lake Valley Example, Ryan Dupont, Joan E. Mclean, Richard C. Peralta, Sarah E. Null, Douglas B. Jackson-Smith

Civil and Environmental Engineering Faculty Publications

The aims of the original proposed project remain the same, that is, to test the hypothesis that Managed Aquifer Recharge (MAR) for stormwater harvesting is a technically feasible, socially and environmentally acceptable, economically viable, and legally feasible option for developing new water supplies for arid Western urban ecosystems experiencing increasing population, and climate change pressures on existing water resources. The project is being carried out via three distinct but integrated components that include: 1) Monitoring of existing distributed MAR harvesting schemes involving a growing number of demonstration Green Infrastructure (GI) test sites; 2) Integrated stormwater/vadose zone/groundwater/ ecosystem services modeling; and …

Gender And Participation In An Engineering Problem-Based Learning Environment, Laura Hirshfield, Milo D. Koretsky

Interdisciplinary Journal of Problem-Based Learning

The use of problem-based learning (PBL) is gaining attention in the engineering classroom as a way to help students synthesize foundational knowledge and to better prepare students for practice. In this work, we study the discourse interactions between 27 student teams and two instructors in an engineering PBL environment to analyze how participation is distributed among team members, paying particular attention to the differences between male and female students. There were no statistically significant differences between the amount that male and female students spoke; however, stereotypical gender roles and traditional gendered behavior did manifest in the discussion. Also, regardless of …

Bs News November/December

Building Services Engineering

No abstract provided.

Annual Pumpkin Toss Combines Fall, Physics And Fun | College Of Engineering, Usu College Of Engineering

College of Engineering News

Engineering students from across Utah will compete Saturday, Oct. 28 to see who can hurl their ripening jack-o’-lanterns the farthest.

Profile Interview With Vincent Duffy, Apoorva Sulakhe

Purdue Journal of Service-Learning and International Engagement

Dr. Vincent Duffy is an associate professor in the Department of Industrial Engineering at Purdue University holding a joint appointment with Agricultural and Biological Engineering. Duffy focuses on human factors engineering and ergonomic design. His interest in teaching began early when he was a teaching assistant for IE 386 at Purdue University while pursuing his master’s degree. As an industrial engineering master’s non-thesis student, Duffy realized he had a natural inclination toward teaching. This motivation, along with the support and mentorship of Ferdinand Leimkuhler, the head of the department, turned him toward the fi eld of research. He rejoined Purdue …

People Like Me: Increasing Likelihood Of Success For Underrepresented Minorities In Stem By Providing Realistic And Relatable Role Models, Nir Aish, Philip Asare, Elif Miskioglu

Faculty Conference Papers and Presentations

Seeing themselves represented in the role models they aspire to, has been shown to be important to students' sense of belonging and success. Underrepresented college students in STEM fields are exposed to only a small set of role models. This set often consist of famous individuals with extraordinary stories (we call these outliers), and represent unfeasible paths to success for a large majority of these students. We aim to remedy this by identifying a set of role models who represent more feasible paths to success (we call these non-outliers) for many underrepresented students. We contend that, despite the less extraordinary …