Engineering Commons^™

Towards A “Cloud Curriculum” In Art And Science?, Roger Malina

The Transdisciplinary STEAM+ Journal

Recently an email hit my desk from Paul Thomas in Australia with a proposal to work together on a “Cloud Curriculum for Art and Science”. I immediately agreed to collaborate. I don’t yet have a clue of what a cloud curriculum is, but what I do know is that we are ‘backing into the future’ in educational institutions and we desperately need a ‘cloud curriculum.’ We need to look over the ten year horizon. And in the emerging art-science field I doubt that the usual approach to curriculum development will work.

Steam...Now!, John Eger

The Transdisciplinary STEAM+ Journal

With America slowly awakening to the need to turn out creative and innovative workers who can join the 21^st century (its already 2012) workplace -- because they have the new thinking skills --we have to change the current emphasis on STEM, for Science, Technology, Engineering and Math to STEAM, by insuring that the whole brain is nurtured through the arts: thus STEAM.

Getting Real About The E In Steam, James Catterall

The Transdisciplinary STEAM+ Journal

STEM and STEAM are in the news. Researchers and educators in my field (cognition, art, and creativity) argue reasons for adding the A to STEM. While I visit this below, my focus is elsewhere. In this brief essay, I want to explore the meaning and importance of the E appearing in both STEM and STEAM. What’s engineering doing in this mix? And what are some reasons for affirming the arts when the role of engineering is clarified?

Design And Evaluation Of An Irrigation System For Meyer Lemons, Anthony Atchley

BioResource and Agricultural Engineering

This senior project discusses the design and implementation procedures for an irrigation system for Meyer lemons. The irrigation system is designed from an economical standpoint incorporating limitations set by the ranch manager such as the use of existing pipe lines and emitter selection preference. Within this project there are the steps taken to ensure a healthy crop utilizing the data and advice collected from other fields and their managers in the same area.

The entire field is run as a single set with two manifolds to supply the Western and Eastern ends of the field. A total of 555 trees …

Scale Of Fluctuation Of Geotechnical Parameters Estimated From Cptu And Laboratory Test Data, Site Onyejekwe, Louis Ge

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

For a complete probabilistic characterization of a geotechnical parameter, its mean, variance, and the scale of fluctuation have to be known. While the mean and variance can be easily determined, determination of the scale of fluctuation is a little more complex. Knowledge of the scale of fluctuation is important in reliability-based design as it is used in implementing spatial averaging and computing the variance-reduction factor. Published values of scale of fluctuation of geotechnical parameters are based on widely sourced data and hence may not be most appropriate for local situations. Based on 11 CPTu soundings and laboratory test results of …

Design And Practical Application Of An Innovative, Pneumatically Latched Valve, Cheng Y. Lin, Jennifer G. Michaeli, Nathan J. Luetke

Engineering Technology Faculty Publications

This article explains the design and fabrication of an innovative five-port, two-position (5/2), pneumatically latched valve. The initial application to repeatedly and automatically lift a mechanical cover or gate was presented as part of an undergraduate student project in the Mechanical Engineering Technology Program's Automation and Controls course in the Department of Engineering Technology at Old Dominion University. Valve operation, including self-latching, utilizes mechanical means only. The valve does not require any electrical power, electronic sensors, or controller, which makes it an energy-saving device. For light-duty operation, a bellows foot-air pump is used for air supply. A single activation of …

Assessing Student Design Work In Social Entrepreneurship Projects, Lindsey Anne Nelson

School of Engineering Education Graduate Student Series

Helping People Living in Poverty? Understanding Factors Motivating Social Entrepreneurship Abstract Increasingly, engineering educators look to increase the social relevance of engineering design activities. The emergence of social businesses has sparked interest in creating programs that teach engineers about social entrepreneurship. Social businesses are viable business ventures where businesses adopt a social mission. Some strategists view social businesses as ways to capture market share in countries that have a large emerging consumer class, such as India and Brazil. These strategists speak of finding “the fortune at the Bottom of the Pyramid” and target consumers earning less than 4USD/day. Other strategists …

Design And Optimization Of A Thermal Capacitor, Karen Nielson, Jordan Tracy Cox

Undergraduate Honors Capstone Projects

Team Hot Stuff designed a thermal capacitor for Senior Design I at Utah State University. This thermal capacitor is intended for use in the food service industry as a low-cost alternative to chafers. Chafers are platters which use oil burners to keep food warm. The client for this thermal capacitor is Thermal Management Technologies (TMT), a company specializing in thermal science solutions whose mission is “to provide simple, practical thermal science solutions to a wide range of platforms including: Industry, Defense, and Space”¹. The founder and president of TMT, Dr. J. Clair Batty, serves as a mentor for …

Oscillation Built-In-Self-Test For Adc Linearity Testing In Deep Submicron Cmos Technology, Koay Soon Chan, Nuzrul Fahmi Nordin, Kim Chon Chan, Terk Zyou Lok, Chee Wai Yong, Adam Osseiran

Research outputs 2013

This paper proposes an Oscillation BIST (OBIST) that is meant to test ADCs fabricated in sub 100nm processes. The design is intended to be capable of testing a 10-bit ADC that was designed in 40nm CMOS. The design scheme presents a simple analog stimulus generator that was designed in 40nm CMOS together with schematic based simulation results. There is also a description of a calibration circuit and a highlevel implementation of a BIST control system to run the BIST and to calculate static parameters such as Differential Non-linearity (DNL) and Integral Non-linearity (INL). Simulation results for the analog stimulus generator …

Product Display Versus Graphical Representation On Packaging, Joshua Galvarino

All Theses

ABSTRACT
Previous research conducted (Hurley, et al., 2012) concerning physical and graphical product visibility from the primary display panel (PDP) is limited to one product category. This research expands previous peer-reviewed research, which indicates that there is a significant difference between consumer preferences of graphical display vs. physical product display on packaging.
The shelf presence of packages showing actual product visibility versus packages showing only a graphical representation of the product was evaluated. Both shopping results and quantitative data using eye-tracking technology were collected and cross-referenced with a qualitative, post-experiment survey.
Specifically, variables of packaging within pasta, snacks, prepared frozen …

Mobile First Web And Content Strategy, Stefanie Havelka, David Stevens

Publications and Research

The paradigm shift from the traditional desktop to the mobile web experience is fast approaching, and providing relevant date, location and time-sensitive content to users via mobile devices becomes an essential piece of the overall web strategy. This presentation demonstrates the concepts, techniques and technologies used to develop both the overall mobile content strategy and user experience, as well as the aggregation and delivery of content to both the desktop and mobile form factors from a single content source.

Tools For Applying Constructability Concepts To Project Development (Design), Nikiforos Stamatiadis, Paul Goodrum, Emily Shocklee, Chen Wang

Kentucky Transportation Center Research Report

The purpose of this report is to document the activities of Phase I of the research effort and present the development of the Constructability Review Database developed for the Kentucky Transportation Cabinet. The database provides the basis for entry and collection of constructability reviews and allows for the identification of trends leading to potential improvements of the process. The database can be used to summarize activities, generate reports for a project, and be capable of quantifying the benefits from the process.

Determining The Proper Point Size For Display Type On Packaging, Joanna Fischer

All Theses

Through the use of a preference test, the proper point size of display text on a package was evaluated in relation to a package's proportions. The test involved the examination of packaging images displaying the product or brand name in various point sizes by 150 participants who were then asked to choose the option they most preferred. The participants were then provided with a post-survey intended to gather additional information regarding potential preference motives.
The primary purpose of this study was to determine the most preferred display type size of a package based on its relationship with the package's proportions. …

Investigation Of Prototype Roles In Conceptual Design Using Case Study And Protocol Study Methods, Timothy Hess

All Theses

Prototypes play an important role in the engineering design process. Engineering design textbooks often discourage the use of prototypes early in the design process, citing past research on prototypes in engineering design has focused describing and classifying the prototypes themselves. The gap in this research is the investigation of prototyping processes. While researchers have studied the characteristics of different prototypes and in some cases have tried to tie characteristics to the outcomes of the design process, the actual prototyping activities and the process of building and using the prototypes has not been studied in detail. The work presented in this …

Efficient Prestressed Concrete–Steel Composite Girder For Medium-Span Bridges, Yaohua Deng

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

In this dissertation, a new Prestressed Concrete-Steel Composite (PCSC) girder system is introduced. The PCSC girder is composed of a lightweight W-shape steel section with shear studs on its top and bottom flanges to achieve composite action with the pretensioned concrete bottom flange and the cast-in-place concrete deck. The PCSC girder is lightweight, economical, durable and easy to fabricate. To prove its feasibility and potential, this study is to investigate design and fabrication issues associated with the PCSC girder. A service design procedure is proposed using Age-adjusted Elasticity Modulus Method (AEMM) to evaluate the time-dependent stresses and strains in the …

Research And Development Of An Extremely Affordable Prosthetic Knee, Victor H. Duenas, Noe Vargas-Hernandez

COURI Symposium Abstracts, Summer 2012

The objective of this research and development work is to apply the design process in a prosthetic knee mechanism. The importance of human knee is founded in the provided mobility, body positioning and support of the body weight. But for amputees, limitations for everyday tasks imply a real challenge. The project scope a cycle involving the social need, the development and the supply of the solution layout. The motivation is to improve life quality through voluntary and independent human movement by providing a low cost knee design.

The design process requires the conceptual, embodiment, detail and evaluation phases to complete …

Design Thinking In Enterprise Supply Chains, Edward Sweeney

Other Resources

No abstract provided.

Design Of A Releasable Snowboard Binding, Rex Crossen, Brian Kruse, Timothy Scott

Mechanical Engineering

A releasable snowboard binding will be proposed to our sponsor. This binding will allow the user to release and engage on demand for aerial tricks, comfort, and increased safety. The releasable snowboard binding we will come up with will be revolutionary within the snowboard industry and make current bindings old and inferior.

Implementation, Design, And Cost Analysis Of A Concrete Washout System, Omar Adina

BioResource and Agricultural Engineering

With the increase of environmental pollution in today’s world, many strategies and regulations are being enforced. These enforcements come from the state and federal governments, but public awareness is often overlooked. Stormwater regulations here in California have dramatically changed over the last decade, as the topic is investigated more often.

This senior project encompassed the design prototype and cost analysis of a permanent concrete washout station for the BioResource and Agricultural Engineering Department at California Polytechnic State University, San Luis Obispo. The design parameters given were to construct a steel bin for the excess concrete to be dumped into during …

Mechanical Properties And Mems Applications Of Carbon-Infiltrated Carbon Nanotube Forests, Walter C. Fazio

Theses and Dissertations

This work explores the use of carbon-infiltrated carbon nanotube (CI-CNT) forests as a material for fabricating compliant MEMS devices. The impacts of iron catalyst layer thickness and carbon infiltration time are examined. An iron layer of 7nm or 10nm with an infiltration time of 30 minutes produces CI-CNT best suited for compliant applications. Average maximum strains of 2% and 2.48% were observed for these parameters. The corresponding elastic moduli were 5.4 GPa and 4.1 GPa, respectively. A direct comparison of similar geometry suggested CI-CNT is 80% more flexible than single-crystal silicon. A torsional testing procedure provided an initial shear modulus …

Concrete Design For Traffic Application, Marc Shields

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Inductive charging of electronic devices is a newer technology that is capable of transferring electrical power without physical contact through wiring. Research is currently being done to find and improve ways to implement this technology on electric cars. If this type of technology pas implemented on a large scale throughout much of the country, electrical or hybrid cars could travel across counties and states without depleting their batteries.

The current problem with electric cars is that they have a limited range of travel. Even with larger batteries with much more capacitance, the range of pure electric cars usually does not …

Finite Element Modeling And Design Of Honeycomb Sandwich Panels For Acoustic Performance, David Griese

All Theses

Honeycomb cellular metamaterial structures offer many distinct advantages over homogenous materials because their effective material properties depend on both their constituent material properties and their geometric cell configuration. From this, a wide range of targeted effective material properties can be achieved thus supporting forward design by tailoring the honeycomb cellular materials and properties for specific applications. One area that has not been fully explored is the set of acoustic properties of honeycomb materials and how these can offer increased design flexibility when targeting acoustic performance. Understanding these relations, the designer can effectively tune designs to perform better in specific acoustic …

Sun-Synchronous Orbit Slot Architecture Analysis And Development, Eric Watson

Master's Theses

Space debris growth and an influx in space traffic will create a need for increased space traffic management. Due to orbital population density and likely future growth, the implementation of a slot architecture to Sun-synchronous orbit is considered in order to mitigate conjunctions among active satellites. This paper furthers work done in Sun-synchronous orbit slot architecture design and focuses on two main aspects. First, an in-depth relative motion analysis of satellites with respect to their assigned slots is presented. Then, a method for developing a slot architecture from a specific set of user defined inputs is derived.

Repairing Mixed-Conducting, Ceramic Electrolyte Films, Kevin Tolman, Izaak Williamson, Kokfoong Chan

College of Engineering Poster Presentations

Ceramatec, Inc. develops ceramic-electrolyte thin films for gas separation/purification technologies. Specific ions (e.g., oxygen) can be selectively diffused through these films in order to obtain a desired product, such as syngas or pure O2. During production, residual stresses develop within the films which induce defects, such as pinholes, micro-cracks, and other sources of leaks, that allow gas contamination. To improve large-scale film production yield, four application techniques were analyzed for their feasibility of restoring the integrity of the films. Controlled, uniform defects were introduced to the films using a microindenter to enable an effective comparison of application techniques …

Development Of The Control And Ignition Systems On A High Pressure Gas Turbine Combustor, Carlos Alejandro Valdez

Open Access Theses & Dissertations

The ignition and control systems of a laboratory scale high-pressure gas turbine combustor were developed in the present work. This work provides a detailed description of the design, development and testing of the remote control system developed for a High Pressure Gas Turbine Combustor (HPTC).

The combustor has the capability to operate at pressures up to 1.5 MPa and temperatures up to 2400 K. It is also designed for a maximum air and fuel flow rates of 81.93 g/s and 35.77 g/s respectively. The fuel used will be CH4 for the early experiments but it is designed to operate using …

Leaving The Lecture Hall: Conducting Hf/E Outside The Classroom, C. B. Fausset, K. R. Bujak, K. A. Kline, Jenay Beer, C.-A. Smarr, A. E. Adams, S. E. Mcbride, J. S. Burnett

Faculty Publications

Georgia Tech HF/E students initiated and managed a multisemester project to experience the nuances of conducting HF/E outside the classroom setting. This article focuses on the lessons learned beyond the classroom: project management, team coordination, communication with non-HF/E team members, application of research methods, and integration of data to prioritize and guide design changes. The goal of this article is to help guide other HF/E students and educators when implementing similar projects by providing the lessons we learned from this experience.

Green Transportation For A Green Earth, Petros J. Katsioloudis, Mildred V. Jones

STEMPS Faculty Publications

Transportation is one of the biggest contributors to the destruction of the environment. Results from environmental research and pursuant governmental regulations are changing the way companies do business and how transportation systems address the future. The Environmental Protection Agency (EPA) has been at the forefront in leading environmental research and instituting policies and regulations to fight the issues impacting the environment. The transportation industry and consumers alike are concerned about the environment, energy resources, efficiencies, and economics. In this article, the authors suggest that it is vital that people promote the protection of the environment and strengthen the laws that …

Design Of A Low Noise Amplifier For Wireless Sensor Networks, Ting Liu

Graduate Theses and Dissertations

CMOS technology becomes important in Radio Frequency (RF) communication systems which include both a receiver and a transmitter. In a high performance radio receiver, the Low Noise Amplifier (LNA) is the first circuit, and its noise performance dominates the entire receiver. Depending upon the system in which they are used, LNAs can be designed according to various topologies and structures. The LNA needs to have matched input impedance, and at the same time it should amplify the small amplitude input signal without adding too much noise and still have the minimal power consumption. It also needs a good interface with …

Fourier Finite Element Analysis Of Laterally Loaded Piles In Elastic Media Internal Geotechnical Report 2011-1, William Higgins, Dipanjan Basu

Technical Reports

Laterally loaded piles are analyzed using the Fourier finite element method. Pile response was observed to be a function of the relative stiffness of pile and soil and of the pile slenderness ratio. The analysis is mostly performed for piles embedded in elastic soil with constant and linearly varying modulus although the pile response in two-layer soil profiles is also investigated. Equations describing pile head deflection, rotation and maximum bending moment are proposed for flexible long piles and stubby rigid piles. The design equations were developed after plotting the pile responses as functions of pile-soil stiffness ratio and pile slenderness …

A Case Study Analysis Of The Kentucky Transportation Cabinet’S Design/Build Pilot Projects, Paul M. Goodrum, Mohammad Moin Uddin, Bradley J. Faulkenberg

Kentucky Transportation Center Research Report

The current economic climate has forced transportation agencies to evaluate opportunities to save money. One possible opportunity lies in Design/Build (DB) delivery. In 2006, with the approval of the Kentucky General Assembly, The Kentucky Transportation Cabinet selected ten projects to be developed through the Design/Build method. DB delivery offers many attainable advantages, the most notable being expedited delivery. The research described herein presents a case study of these DB pilot projects in order to capture lessons learned on the use of the DB delivery method on future projects. In order to determine which projects are suitable for DB delivery, a …