Engineering Commons^™

Fuzz Pedal Design Project, Kyle Schaefer

Biomedical Engineering

The purpose of this project was to design and build a high quality, yet affordable, analog “fuzz” guitar pedal kit to be sold to other members of Cal Poly’s Audio Engineering Society. The Audio Engineering Society (AES) has hosted pedal-building projects in the past, but my project partner Michael Twardochleb first had the idea to build an original kit to be officially affiliated with the club. Michael had built other pedals of his own in the past, making him an excellent partner to have for this project. Our design was based on the classic Vox Tonebender’s circuit, which was in …

Parametric Analysis Of Resilient Modulus Modeling For Recycled Asphalt Pavement In Base Layer, Ehab Noureldin, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The resilient modulus (M_R) has been found to be the most important parameter in the Mechanistic-Empirical Pavement Design Guide (MEPDG) for the base layer. A literature review showed that the use of recycled asphalt pavement (RAP) in the base layer had many economic and structural benefits. The prediction of M_R with the specific MEPDG model for the base layer mixed with RAP was found to be reliable for several field conditions. However, further studies of the MEPDG model are needed for an understanding of the physical meaning of each parameter in the model. The most important factor …

Transition Zone Design Final Report, Nikiforos Stamatiadis, Adam J. Kirk, Andrea Cull, Austin Dahlem

Kentucky Transportation Center Research Report

The purpose of this report is to document the activities of the research effort and present the findings of the work accomplished. Transition zone is the area in which it is communicated to drivers that the roadway environment is changing (i.e., from rural to built-up) and that their speed should change as well. This study evaluated treatments that could advise drivers to this. Based on the study findings, it is recommended to add additional speed warning sites to such transition zones.

Human Factors Engineering At Design Stage: Is There A Need For More Structured Guidelines And Standards?, Farzad Naghdali, Maria Chiara Leva, Nora Balfe, Samuel Cromie

Articles

Human Factors Engineering (HFE) focuses on the application of human factors knowledge to the design and construction of socio-technical systems. The objective is to ensure systems are designed so as to optimise the human contribution to production and minimise potential f r design-induced risks to health, personal or process safety or environmental performance (OGP, 2011). The ISO standard ISO 9241-210 (2010), Ergonomics of human-system interaction, requires that all new facilities projects apply the principles of Human Factors Engineering (HFE) during early design stages. In practice this means ensuring, as a minimum, that every new facilities project is screened in collaboration …

Integrating Technology And Engineering In A Stem Context, Barry N. Burke, Philip A. Reed, John G. Wells, Robert E. Yager (Ed.), Herbert Brunkhorst (Ed.)

STEMPS Faculty Publications

(First paragraph) Imagine students entering the classroom with an enthusiasm that cannot be contained. They come from all walks of life and with different experiences and backgrounds and are eager to engage in learning. Inspiration and innovation are on their mind. What they learned in their science and math classes is now being applied in another class they take called Technology and Engineering. Opportunity is what they see for their future. Something about connecting all the dots from all their classes propels them to change their outlook, to get involved, to get excited about school and to envision their future.

A Third-Year Review Of Design And Packaging Of Sensor Systems, M. Brian Thomas, Andrea Mitofsky, Vukica Jovanovic, John Eiler

Engineering Technology Faculty Publications

Faculty from the Electrical Engineering and Design Engineering Technology Departments at Trine University have developed a joint design module for upper-level courses in their respective disciplines. In this module, student teams collaborate in designing and prototyping the electronics and packaging for a hand-held sensor system. The principal objective of the collaboration is for students to incorporate design factors external to their discipline in a program-focused design project. This effort advances the students' abilities to work effectively in multidisciplinary teams during their senior capstone courses. The design module was introduced in the fall 2011 semester, and was repeated in fall 2012 …

Simulating Real-World Work Experience In Engineering Capstone Courses, Thomas H. Deagostino, Vukica M. Jovanovic, M. Brian Thomas

Engineering Technology Faculty Publications

Experiential learning and cooperative education provide students with the necessary tools to succeed in the workplace by simulating their future working environment. Various studies have shown that many graduates have gaps related to their so called "soft skills", which are related to teamwork, time management, working under pressure and tight deadlines. The main purpose of the inclusion of the industry expert in senior design discussions is to provide meaningful feedback through a competitive led by industry practitioners. In this simulation, the senior engineering students take on the role of actual engineering job functions, on a demanding, continuous basis for the …

The Design And Validation Of A Computational Rigid Body Model For Study Of The Radial Head, Cassandra Woodcock

Theses and Dissertations

Rigid body modeling has historically been used to study various features of the elbow joint including both physical and computational models. Computational modeling provides an inexpensive, easily customizable, and effective method by which to predict and investigate the response of a physiological system to in vivo stresses and applied perturbations. Utilizing computer topography scans of a cadaveric elbow, a virtual representation of the joint was created using the commercially available MIMICS(TM) and SolidWorks(TM) software packages. Accurate 3D articular surfaces, ligamentous constraints, and joint contact parameters dictated motion. The model was validated against two cadaveric studies performed by Chanlalit et al. …

The Collapsible Trailer: Design And Manufacture, Robert Hobson

Biomedical Engineering

No abstract provided.

Design And Implementation Of Eight-Legged Robotic Transporter, Jeremy David Depangher

Master's Theses

This thesis contains the design, manufacturing, and testing of a functional eight-legged robotic transporter based on the concept design laid out in U.S. Patent 7,246,671. The device is intended to achieve three different sequences of motion: regular driving, obstacle climbing, and stair climbing. The prototype was carried through concept design, analysis, selection of materials and components, manufacturing, software development, and final assembly and testing. The device can be assembled under multiple configurations, which harbor certain advantages and disadvantages. The results of the testing encourage the continuation of a second iteration of this concept.

Design And Preparation Of A Ni Steam Reforming Catalyst, Phillip R. Smith, Dr. Calvin H. Bartholomew

Journal of Undergraduate Research

Steam reforming catalysts play an essential role in the production of hydrogen, which is an essential fuel, feedstock, and reactant in the worldwide chemical industry. These steam reforming catalysts use a finely dispersed metal, supported on a porous ceramic material, to produce hydrogen from hydrocarbon sources. This is shown in reaction 1, where HC denotes hydrocarbon, H2O denotes water, H2 denotes dihydrogen, CO denotes carbon monoxide, CO2 denotes carbon dioxide, and CH4 denotes methane.

Tools For Applying Constructability Concepts To Project Development (Design), Nikiforos Stamatiadis, Paul Goodrum, Emily Shocklee, Roy Sturgill, Chen Wang

Kentucky Transportation Center Research Report

The purpose of this report is to document the activities of Phases I and II of the research effort and present the findings of the work accomplished. Phase I developed the Constructability Review Database for the Kentucky Transportation Cabinet and Phase II conducted a benefit analysis of the constructability review process. The database provides the basis for entry and collection of constructability reviews and allows for the identification of trends leading to potential improvements of the process. The database can be used to summarize activities, generate reports for a project, and be capable of quantifying the benefits from the process. …

How Engineering Innovators Characterize Engineering Innovativeness: A Qualitative Study, Daniel Michael Ferguson

Open Access Dissertations

The use of science and engineering skills to address the problems of modern society is regarded as an economic strategy in developed countries across the world. However, business and political leaders in the United States feel that we, as a society, do not understand that new global competition can match and even outpace us on innovation. Many of the studies on innovators are not specific to engineers. This study filled a gap in the understanding of what characteristics constitute innovative behavior in engineers.

The purpose of this study was to explore engineers' views of innovation and innovators who create and …

Merging Creative Design And Cad Learning Activities In A Product Design Programme, Pearl O'Rourke, Colm O'Kane, Leslie Smith, Michael Ring

Conference Papers

Traditional learning and teaching methods for creativity differ from those used in a scientific context. Although the creative process can benefit from a certain level of prescription and structural constraint - with time allocated to research, problem definition, conceptualisation and idea development - flexibility and fluidity are necessary for creative innovation. In contrast, the more linear and rigid pedagogies associated with science and engineering education facilitate efficient learning of subjects such as those based on software packages, manufacturing and materials theory or mechanics. This paper describes the development of a project which aims to establish constructive links between the learning …

Using Design Hierarchy In Digital Logic To Illustrate The Scientific Method As A Human Invention, Douglas Deboer

Pro Rege

This paper was presented at the Christian Engineering Conference, Atlanta, Georgia, June 2013. It was then published in Proceedings of the 2013 Christian Engineering Conference, pp. 99–106. Permission to publish was granted by Steve VanderLeest, Conference Chair.

The Design And Synthesis Of A Compliant Bicycle Derailer, Matthew Christensen, Dr. Larry L. Howell

Journal of Undergraduate Research

Compliant mechanisms are those which gain part or all of their motion from the flexibility of their parts. For example, the motion of a hinge can be alternatively provided by a pin (like a hinge on a door), or by a thin flexible member (like a hinge in the cover of a book). The door hinge is easily designed by selecting brackets and a pin with adequate strength to support the loads. The book hinge is more difficult to design. The book has additional considerations like designing the material thin enough to bend, thick enough to bear the load, and …

Mechanical Design Of Pird (Principal Investigator Rack Drawer) For Sofia, Hari Prasad Shetty Mr., Murali Krishna Kandlagunta Mrs., John Miles Mr., Zaheer Ali Mr.

STAR Program Research Presentations

SOFIA, the world’s largest airborne observatory with 2.5-meter diameter infrared telescope is equipped with 7 instruments: EXES, FIFI-LS, FLITECAM, FORCAST, GREAT, HAWC, and HIPO. Flying at altitudes between 39,000 and 45,000 feet, SOFIA avoids 99% of the atmospheric water vapor, records and analyzes the infrared radiation from the cosmos. SOFIA is able to observe the occultation of stars by solar system objects. By determining the size, compositions, and atmospheric structures of these objects, SOFIA can help answer the questions on creation and evolution of the universe, formation of the stars and planets, and nature of black hole at the center …

The Design And Implementation Of The Dynamic Ionosphere Cubesat Experiment (Dice) Science Instruments, Steven Reed Burr

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Dynamic Ionosphere Cubesat Experiment (DICE) is a cubesat satellite project funded by the National Science Foundation (NSF) to study the ionosphere. Cubesats are small satellites in the shape of a cube around 10cm on a side, and allow better access to space. Three main properties of the ionosphere are measured by the DICE mission, which are electric field, magnetic field, and plasma density with an instrument for each. The limitation of power, mass, and volume contributes to the difficulty of cubesat design. Mission and instrumentation requirements must be carefully planned to ensure mission success. Each instrument’s requirements and design are …

Interactive Museum Exhibit To Introduce K-6 Grade Students To Circuits And The Electric Conductivity Of Various Materials, Thien Vu-Nguyen

Materials Engineering

The SciTechatorium (SciTech) is a museum filled with interactive exhibits for visitors to learn science informally. A new exhibit was developed to explore electric conductivity and circuits. The design was made based on the size of the material sample the students will use and to allow interactions with multiple users. The materials the students will use were selected using Cambridge Engineering Selector (CES) to sort the materials by resistivity, the inverse of conductivity. After sorting the materials by resistivity, five different materials (balsa wood, polystyrene, polyester, stainless steel, and copper) were chosen for the exhibit. The target size of the …

Design, Construction, And Evaluation Of A Portable Reusable Plastic Container Dumper, Kevin J. Lau

BioResource and Agricultural Engineering

This senior project discusses the design, construction, and evaluation of a portable RPC (Reusable Plastic Container) dumper. This RPC dumper is one piece of a citrus processing system to package citrus. Bee Sweet currently utilizes man power in order to dump its RPCs whereas this design will decrease the amount of man power needed to dump RPCs during high workloads.

The goal of this project was to design, construct, and test a custom fabricated RPC dumper that will decrease the number of people needed to dump RPCs and also the amount of damage on the oranges when being dumped from …

Micro Sprinkler Irrigation Design On Almonds, Scott Trinta

BioResource and Agricultural Engineering

This project is to design a micro sprinkler system with a cost analysis for a 17 acre field. This type of irrigation will allow for a more uniform distribution of water, with more water being beneficially used at low flow rates. This design should minimize unwanted runoff water and save the farmer money in the long run.

Design And Installation Of A Mobile Agriculture Chemical Mixing Station, Jason Mendes

BioResource and Agricultural Engineering

This senior project encompassed the design and fabrication of a Mobile Agricultural Chemical Mixing System. The design parameters were provided by Mark McKean and McKean Farms from Riverdale, Ca. The project’s objective was to provide safer working conditions for operators by improving their working environment while increasing mixing efficiency. This mobile system will provide storage for materials, as well as, a diversified mixing system at the site of applications.

The major components of the project include two chemical mixers to mix materials, a 2-inch suction pump to supply water from non-powered sources, and a flatbed trailer to encompass the unit …

School Van Access In Nepal, Edgar Corona, Humberto Maldonado, Josh Schiesl

Mechanical Engineering

A need has been identified by a school in Nepal intended for children with Cerebral Palsy, called Sathi Sansar, to develop a more effective solution to loading and unloading students onto the school’s Toyota HiAce van. Currently, a combination of the driver, parents and teachers manually help the students on and off the van. However, this task has proven to be both laborious and time consuming for all parties involved. A solution to this problem needs to be designed and one is currently being developed by a team of engineering students from California Polytechnic State University-San Luis Obispo and Katmandu …

Evaluation And Modernization Of The Scott Valley Irrigation District, Ashley Parry

BioResource and Agricultural Engineering

The Scott Valley Irrigation District (SVID), located in Etna, California, is a small water district that serves 25 users and runs approximately 14 miles. The district was established in the 1920’s, and few modifications have happened since then. The district approached the Natural Resource and Conservation Service (NRCS) about possible improvements to the system and how do go about making decisions and implement improvements. As an outreach project the NRCS decided to pursue the evaluation and modernization plan.

The project was done in multiple phases from research, evaluation, surveying and design portions. This report will discuss the current state of …

Popularity Of Virtual Reality Immersion In Theme Park Attractions Of North America, Jessica A. Jelinski

Honors Theses

Theme parks continually change to incorporate new technology. Since the development of virtual reality, designers of theme park attractions have utilized several different immersion technology systems. Most of the current attractions are based on the Head-Mounted Display system and the Cave Automatic Virtual Environment system. To date, few studies or papers have been published concerning the effect virtual reality and the accompanying immersion technology may have on theme park attractions. One hundred and seventy-eight attractions from eight theme parks were categorized based on level of immersion and then analyzed for this study. Wait times for these attractions were used to …

Transformable Wheelchair, Benjamin Shurtz

Undergraduate Honors Capstone Projects

This report includes the development, design, and analysis of a transformable wheelchair. There was a need to design and build a wheelchair that transformed to be pushed, pulled, or self-propelled. This design meets the need of physically restricted wheelchair users who frequent simple hiking trails without needing to move to a secondary off-road capable device. Documentation for concepts, analysis, and completed design details follows.

Measuring Arousal Through Physiological Responses To Packaging Designs: Investigating The Validity Of Electrodermal Activity As A Measure Of Arousal In A Realistic Shopping Environment, Daniel Hutcherson

All Theses

The validity of electrodermal activity is investigated in the context of packaging design evaluation as a sensitive measure of arousal. Analysts agree that purchasing decisions are subconscious and emotional decisions, contrasted against the popular belief that consumers make purely rational decisions. To understand the personal and rapid character of a consumer's purchasing decisions we must find methods of which to measure and interpret consumer reactions to various packaging designs. Focus groups are discussed as antiquated research methods and new, advanced technologies are outlined as physiological responses. Past literature displays methodological approaches to using electrodermal activity measures in consumer studies, however …

A Methodology For Designing Pervious Bicycle Lanes For Stormwater Management, Donald West Iii

All Theses

Bicycles have proven to be an efficient and reliable form of transportation in urban settings. Therefore, the addition of bicycle lanes into the transportation network could significantly impact and improve the sustainability of our infrastructure by reducing greenhouse emissions and improving the health of individuals who cycle on a regular basis. Pervious pavements are an approved (LID) strategy that could potentially be used to construct these new facilities thereby reducing the quantity of stormwater runoff and improving the water quality. Practicing engineers need both a design aid and research supported methods for designing these improvements before they can be fully …

Analysis And Design Of A Thermal Capacitor For Use In The Food Industry, Karen Nielson

Undergraduate Honors Capstone Projects

Team Hot Stuff is working with Thermal Management Technologies (TMT) of Logan, UT to explore the concept of a thermal capacitor serving platter. With the funding from TMT, Hot Stuff will design, build, and test a prototype serving platter. This report is written by Hot Stuff for MAE 4800, Capstone Design I; it covers the design and analysis of a serving platter.

Biodiesel Reactor Design With Glycerol Separation To Increase Biodiesel Production Yield, Budy Rahmat, Imas Siti Setiasih, Roni Kastaman

Makara Journal of Technology

The study consisted of reactor design used for transesterification process, effect of glycerol separation on transesterification reaction, determination of biodiesel quality, and mass balance analysis. The reactor was designed by integrating circulated pump/stirrer, static mixer, and sprayer that intensify the reaction in the outer tank reactor. The objective was to reduce the use of methanol in excess and to shorten the processing time. The results showed that the reactor that applied the glycerol separation was able to compensate for the decreased use of the reactant methanol from 6:1 to 5:1 molar ratio, and changed the mass balance in the product, …