Engineering Commons^™

Warehouse Design For Polygait, Colby Spear

Industrial and Manufacturing Engineering

Professor Tali Freed, advisor of POLY GAIT, needs a warehouse built to accommodate the testing of Radio Frequency Identification (RFID) technology with Automatic Storage and Retrieval Systems (AS/RS). This report explores a 5-step warehouse designing technique. The five steps are as follows: Overall Structure, Sizing and Dimensioning, Operation Strategy Selection, Equipment Selection, and Department Layout. Each of these is analyzed in turn to cover everything necessary in designing a warehouse. Furthermore, a cost analysis was conducted in order to give Professor Freed a better understanding on the cost required to build this warehouse. A smaller 25’x22’ foot is optimal because …

Olympic Bocce Ballers, Steven Erickson, William Haley, Taylor Vaughan

Mechanical Engineering

No abstract provided.

Variability Analysis Of Undrained Shear Strength For Reliability-Based Design, Site Onyejekwe, Xin Kang, Louis Ge, Richard Wesley Stephenson

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Description of the Spatial Variation of Compositional and Mechanical Soil Parameters is Often Paramount in Site Characterization of Geotechnical Design and Analysis. the Values of the Parameters Themselves Largely Depend on In-Situ State Factors Which Are Related to Spatial Locations. Also, for Large-Scale Engineering Projects Such as Earth Dams or Highways, It is Generally Expected that Heterogeneous Site Characteristics Will Be Revealed by Investigations at Spatially Distant Locations. Currently, Most Reliability-Based Design Methods Are based on the Second-Moment Statistics (Mean and Variance). However, They Are Unable to Adequately Describe the Spatial Variation of Soil Properties. in This Paper, Spatial Correlation …

Design Of A Micro Irrigation System For An Almond Orchard, Adam Scheuber

BioResource and Agricultural Engineering

The owners of Scheuber Farms, a 1,000 acre row crop farming operation located in Patterson, California, wish to convert a 15-acre field into an almond orchard. For irrigating the trees, they would like to use a microsprayer irrigation system. The design I recommend and describe in this paper utilizes proper hydraulic analysis, and is based on the ability to supply enough water to match the amount of water required by the orchard during the peak month of an average year.

All of the major components and parameters of the microsprayer irrigation system were designed at minimal cost while ensuring that …

Investigation Of The Design And Static Behavior Of Cylindrical Tubular Composite Adhesive Joints Utilizing The Finite Element Method And Stress-Based Failure Theories, Michael D. Lambert

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The stress and strength behavior of cylindrical tubular adhesive joints composed of dissimilar materials was explored. This was accomplished with the finite element method (FEM) and stress-based failure theories. Also, it was shown how a design of experiments (DOE) based method can be used to objectively organize the process of optimizing joint strength by using stress-based failure criteria.

The finite element program used in this work was written in-house from scratch to implement the FEM for the purpose of solving both axisymmetric and three-dimensional linear elastic governing equations of static equilibrium. The formulation of the three-dimensional model is presented, and …

Design Of Online Student Fee Committee Proposal Information System, Kenneth Cairns, Gregory (Greg) Jacobson

Industrial and Manufacturing Engineering

The purpose of this project is to overhaul the IME department’s Student Fee Committee (SFC) proposal system. A web enabled database was designed in order to improve this system. A significant amount of time was spent researching different programming languages, paradigms, and frameworks in order to determine the most logical approach to the system redesign. After a few false leads, it was determined that the most appropriate solution to the problem was to design a C# based web form application using asp.NET technology, developed in Microsoft Visual Studio. A mockup was created in Access in an attempt to determine if …

Computational Intelligence In Wireless Sensor Networks: A Survey, Raghavendra V. Kulkarni, Anna Förster, Ganesh K. Venayagamoorthy

Electrical and Computer Engineering Faculty Research & Creative Works

Wireless sensor networks (WSNs) are networks of distributed autonomous devices that can sense or monitor physical or environmental conditions cooperatively. WSNs face many challenges, mainly caused by communication failures, storage and computational constraints and limited power supply. Paradigms of computational intelligence (CI) have been successfully used in recent years to address various challenges such as data aggregation and fusion, energy aware routing, task scheduling, security, optimal deployment and localization. CI provides adaptive mechanisms that exhibit intelligent behavior in complex and dynamic environments like WSNs. CI brings about flexibility, autonomous behavior, and robustness against topology changes, communication failures and scenario changes. …

Integrating Engineering Design Challenges Into Secondary Stem Education, Ronald L. Carr

Publications

Engineering is being currently taught in the full spectrum of the P-12 system, with an emphasis on design-oriented teaching (Brophy, Klein, Portsmore, & Rogers, 2008). Due to only a small amount of research on the learning of engineering design in elementary and middle school settings, the community of practice lacks the necessary knowledge of the trajectory of students' learning progressions towards design mastery and expertise and the appropriateness of otherwise established design pedagogies. The issue is even more pressing since many states are embedding engineering into their standards without a clear notion of how engineering (often conceptualized as design) works …

Engineering Design Challenges In A Science Curriculum, Arthur Eisenkraft

Publications

Create a light and sound show to entertain your friends. Design an improved safety device for a car. Develop a 2-3 minute voice-over for a sports clip explaining the physics involved in the sport. Modify the design of a roller coaster to meet the needs of a specific group of riders. Design an appliance package for a family limited by the power and energy of wind generator. Develop a museum exhibit to acquaint visitors with the atom and nucleus and create a product that can be sold at the museum store after visitors leave your exhibit. All of these challenges …

A Left Ventricular Motion Phantom For Cardiac Magnetic Resonance Imaging, Mehmet Ersoy

ETD Archive

The mammalian left ventricle (LV) has two distinct motion patterns: wall thickening and rotation. The purpose of this study was to design and build a low-cost, non-ferromagnetic LV motion phantom, for use with cardiac magnetic resonance imaging (MRI), that is able to produce physiologically realistic LV wall thickening and rotation. Cardiac MRI is continuously expanding its range of techniques with new pulse sequences, including new tissue tagging techniques which allow intra-myocardial deformation to be visualized. An essential step in the development of new cardiac MRI techniques is validating their performance in the presence of motion. MRI-compatible dynamic motion phantoms are …

Probabilistic Structural And Thermal Analysis Of A Gasketed Flange, Atul G. Tanawade

ETD Archive

Performance of a flange joint is characterized mainly by its 'strength' and 'sealing capability'. A number of analytical and experimental studies have been conducted to study these characteristics under internal pressure loading. However, with the advent of new technological trends for high temperature and pressure applications, an increased demand for analysis is recognized. The effect of steady-state thermal loading makes the problem more complex as it leads to combined application of internal pressure and temperature. Structural and thermal analysis of a gasketed flange was computationally simulated by a finite element method and probabilistically evaluated in view of the several uncertainties …

Design Mentoring Tool, Bob Mccullouch, Walter Land

JTRP Technical Reports

In 2004 a design engineer on-line mentoring tool was developed and implemented The purpose of the tool was to assist senior engineers mentoring new engineers to the INDOT design process and improve their technical competency. This approach saves senior engineers time while developing a consistent mentoring approach and standardizing technical knowledge in road and bridge design. It is a self-guided tool that utilizes multi-media and web-based technologies, trains engineers in the design process and provides resources to use for developing plans and specifications. Available resources include INDOT design practices, design standards, design memos, specification and construction standards, procedures, and check …

Design, Fabrication And Characterization Of A New Wind Tunnel Facility – Linear Cascade With A Wake Simulator, Jean-Philippe Junca-Laplace

LSU Master's Theses

A new wind tunnel has been designed and constructed at the LSU Mechanical Engineering Laboratories. The objective was to design a versatile test facility, suitable for a wide range of experimental measurements on turbine blades. The future study will investigate the impact of unsteady inflow conditions on film cooling performance. More specifically, it will study how the unsteady flow due to the upstream passing wakes coming from the front row vane affects the film cooling performances on the turbine blades. The test section consists of a four passage linear cascade composed of three full blades and two shaped wall blades. …

Design Of A Liquid Fuel Injector For Alternative Fuel Studies In An Atmospheric Model Gas Turbine Combustor, John Stevenson

Honors Theses

A new liquid-fuel injector was designed for use in the atmospheric-pressure, model gas turbine combustor in Bucknell University’s Combustion Research Laboratory during alternative fuel testing. The current liquid-fuel injector requires a higher-than-desired pressure drop and volumetric flow rate to provide proper atomization of liquid fuels. An air-blast atomizer type of fuel injector was chosen and an experiment utilizing water as the working fluid was performed on a variable-geometry prototype. Visualization of the spray pattern was achieved through photography and the pressure drop was measured as a function of the required operating parameters. Experimental correlations were used to estimate droplet sizes …

Design Space Decomposition Using Concept Maps, David E. Robbins

All ETDs from UAB

Decomposition of engineering design spaces has been performed primarily through statistical and system identification techniques. However, no approach has yet attempted to capture the semantics of a design through decomposition. This thesis presents graphical techniques for capturing the semantics of a design by developing an information architecture through design space decomposition using concept maps. In particular, concept maps are used to begin identifying the top layers of the information architecture of a problem, which has the dual effects of performing an initial decomposition of the design space and refining the parameters that will define more detailed design spaces for further …

Piedras Blancas Clock Works, Andrew James, Andrew Jupin, Matt Weber

Mechanical Engineering

In 1875, the Piedras Blancas Lighthouse was built to warn ships sailing the California coast of the hazards of the rocky shore. In 1949 a fierce storm damaged the top portion of the lighthouse and the eight ton cast iron and brass assembly had to be replaced by a much lighter piece that still served the purpose of warning oncoming vessels. The former top portion came to rest in downtown Cambria and is still there today, enclosed in a glass room to be observed by visitors and townspeople. Today, the Piedras Blancas Light station is cared for by the Bureau …

Designing A Photovoltaic System Hybrid For A Health Clinic In Camilo Ortega, Nicaragua, Jeremy Holliman

Electrical Engineering

As developing nations continue to foster the development of their technologies and economies, industrialized nations have taken an active approach in providing green and sustainable alternatives for them to consider. Non-profit organizations like Engineers Without Borders holds sustainable international development as paramount to all international projects that their student and professional chapters undertake. The Cal Poly Engineers Without Borders student chapter has implemented a variety of projects from slow sand filters to compressed earth blocks, and the Nicaragua team is in the process of designing a health clinic for the Camilo Ortega community. In order to power the health clinic, …

Optimal Design Of Work Zone Median Crossovers, Karen Schurr, Brian R. Garnder, Shashwat Rijal

Nebraska Department of Transportation: Research Reports

No abstract provided.

Design Of Novel Drug Delivery System And Optimal Dosage Regimens, Kwang Seok Kim

Dissertations

Three representative drug delivery systems were analyzed to emphasize the roles of mathematical models and computer-aided simulations in pharmaceutical research. In the first project, a protocol was developed so that the optimal regimen, consisting of the intravenous boluses and subsequent infusion of theophylline, could be obtained once information on the pharmacokinetics became available. The method was based on a two-compartment model of the human body. A module was created and posted on a website for free access. The second project dealt with the transdermal heat-assisted delivery of corticosterone. Heat conduction and drug diffusion through the patch and the skin were …

Implementation Of Physiologic Pressure Conditions In A Blood Vessel Mimic Bioreactor System, Kevin Mark Okarski

Master's Theses

ABSTRACT

Implementation of Physiologic Pressure Conditions in a Blood Vessel Mimic Bioreactor System

Kevin Mark Okarski

Tissue engineering has traditionally been pursued as a therapeutic science intended for restoring or replacing diseased or damaged biologic tissues or organs. Cal Poly’s Blood Vessel Mimic Laboratory is developing a novel application of tissue engineering as a tool for the preclinical evaluation of intravascular devices. The blood vessel mimic (BVM) system has been previously used to assess the tissue response to deployed stents, but under non-physiologic conditions. Since then, efforts have been made to improve the vessel and bioreactor’s ability to emulate in …

Design Aids Of Nu I-Grinder Bridges, Kromel Hanna, George Morcous, Maher K. Tadros

Nebraska Department of Transportation: Research Reports

No abstract provided.

Design Collaboration As A Tool For Developing Diversity In The Work Place, Rees E. E. Shad

Publications and Research

Without a doubt the modern workplace is one made up of numerous working professionals graced with an array of varied abilities who work in tandem to meet a common goal. In this article the author recounts his personal journey to embracing the collaborative process and how he has honed and developed the skill set into an important element of design curriculum in order to prepare students for this fundamental market paradigm.

Project Selection And Process Plan Design For Alternative Ime 143/144 Final Project, Joseph S. Anderson, Sarah R. Shackelford

Industrial and Manufacturing Engineering

Hundreds of students each year enroll in IME 143 or IME 144, freshman-level machining classes, and complete an air motor to demonstrate the skills they have acquired on a variety of manufacturing processes. The air motor, however is useful only as a teaching tool in the classroom; once the students bring them home, the air motor becomes little more than a trophy at best.

With the capabilities of the machining lab, a final project can be developed that can have a benefit to people in need while maintaining educational value. This project details a process plan for a manual water …

Lavers Ranch Vineyard Design, A.J. Borba

BioResource and Agricultural Engineering

This senior project discusses the design of a vineyard irrigation system for Lavers Ranch in Glennville, Ca. The vineyard is 33 acres in the foothills of the Sierra Nevada Mountains and water will be provided for the system by three springs located on the ranch. This senior project discusses vineyard layout: vine direction, vine spacing, and emitters per vine. Using Microsoft Excel, a program will be developed that will give irrigation requirements for the conditions given by Lavers Ranch. Along with the Excel program final maps will be included with detailed information of the field requirements.

Design And Usability Of Social Networking Web Sites, Robert Pessagno

Graphic Communication

This study began by designing the layout of a new social networking Web site and putting it to practical use. A team of computer science students at Cal Poly developed this social networking site for their senior project, and called it Friend Riot. The new and innovative features that Friend Riot consists of set it apart from other popular social networking Web sites, but its interface was lacking a good design. When the new design was implemented, it was tested against the competition: Facebook, MySpace, and YouTube.

The purpose of this study is to determine the effects that Web design …

Comparative Studies On Oxygen Mass Transfer For The Design And Development Of A Single-Use Fermentor, Kristan L. Sorenson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Accurate experimental oxygen mass transfer coefficient, a measure of how quickly oxygen travels from a gas bubble to the bulk liquid, is important for comparing performance and for evaluating the oxygen transfer capability of a fermentor. Delays in probe response and changing gas volumes upon start-up of gassing affect the accuracy of oxygen transfer measurements. To mitigate these inaccuracies, a standard correction procedure for oxygen mass transfer data was established for highly oxygenated, well-mixed fermentation systems. Probe response time correction was generated by applying a second-order response model to dissolved oxygen probes and shown to be effective within 4%. By …

Integrating Engineering And Communication Tools For The Automation Of Design Rationale Capture, Kenneth John Mix

Theses and Dissertations

Product development is continually becoming more challenging as global competition requires more efficient design methods. The reuse of company knowledge, specifically the design rationale that occurs during projects is essential to success. This thesis presents a method for integrating engineering and communication tools for purposes of automating the capture of communication-based design rationale. The method is based on four basic principles: to integrate, to make data retrievable, to minimize user interaction, and to store as much DR as possible. The core method consists of two primary operations, the first being to capture the design rationale, and the second being to …

Design And Evaluation Of A Humanoid Robot For Autism Therapy, Daniel J. Ricks

Theses and Dissertations

Recent evidence has shown that children with autism may behave more pro-socially when interacting with a robot than with a human. The objective of this research is to develop a robotic system for use in the clinical treatment of children with autism. The governing assumption behind this thesis is that using a robot in a clinic, under the guidance of a trained therapist, may lead to therapeutic benefits that may not be achieved without the presence of the robot. The robot Troy was developed to fulfill such a role in a clinical setting. The primary objective was to design a …

Facility And Database Design For The Research Development Center, Nicholas J. Mehas

Industrial and Manufacturing Engineering

The purpose of this project is to create a new facility and database design to replace the current Research Development Center located on the campus of California Polytechnic State University San Luis Obispo and the database in use at the facility. Currently the Research Development Center is a condemned building and the database lacks up-to-date technology. The project will develop new designs for both, based on concurrent engineering. The outcome of the project will be a new design for a new building that increases capacity and capability; a new database design that integrates newer technologies and methods for tracking tools.

Design And Fabrication Of Memristors, Tal R. Nagourney

Journal of the Microelectronic Engineering Conference

This paper details the design and fabrication of memristors in the RIT Semiconductor and Microsystem Fabrication Laboratory. Two methods of partially oxidizing titanium were explored, reactive sputtering and thermal oxidation. It is determined that thermal oxidation allows for greater control over the oxidation process due to an inability to sufficiently control the gas flow in the sputter chamber. Electron beam lithography is used to define holes in oxide in which the memristors will be fabricated. Due to issues with the lithography, fabrication is incomplete and ongoing.