Engineering Commons^™

Roadmap: Integrating Artificial Intelligence In Structural Health Monitoring Systems, Simon Laflamme, Erik Blasch, Flippo Ubertini, Zheng Liu, John Wertz, Christine Knott, Matthew Cherry, Eric Lindgren, Fu-Kuo Chang, Amrita Kumar, Jack Poole, Keith Worden, Austin Downey, Jie Wei, Patrick F. Musgrave, Adrian S. Wong, Guiseppe Quaranta, Marco Martino Rosso, Giuseppe Carlo Marano, Yu Chen, Et. Al.

Faculty Publications

Advances in computing and machine learning (ML) methods have led to a rapid rise in artificial intelligence (AI) research and applications in many fields. AI research benefitted from advances in computation hardware, collection and distribution of large data sets, and proliferation of software techniques. AI techniques include ML for provable results, deep learning for data exploration, reinforcement learning for control, and active learning for adaptive systems. Likewise, AI algorithms can handle large amounts of data, construct unknown representations, and provide a direct link between data and classification for decision making. These unmatched capabilities have been seen as a path to …

Cancerseg-Xa: Medical Histopathology Segmentation System Based On Xception Backbone And Attention Mechanisms, Alaa Youssef, Wessam H. El-Behaidy, Aliaa Youssif

Computer Science

Accurate segmentation of histopathological images is essential to support early diagnosis and effective treatment planning in cancer care. This study presents CancerSeg-XA, a deep learning-based histopathology segmentation system designed to deliver robust performance across diverse tissue types and imaging sources. Built upon the DeepLabV3+ framework, CancerSeg-XA incorporates architectural enhancements to strengthen feature representation and improve model stability. The system was evaluated on three widely recognized datasets—BCSS, PanNuke, and PUMA—each presenting distinct structural and clinical challenges. Across all datasets, CancerSeg-XA consistently outperformed the baseline DeepLabV3+ in terms of segmentation accuracy, recall, and F1-score. Specifically, it achieved accuracy improvements of 4.78%, 4.31%, …

Transformer-Driven Intelligent Prediction For The Time-Series Features Of Mine Pressure In Fully Mechanized Mining Face, Du Feng, Chen Bo, Wang Wenqiang, Pu Hai, Du Xueming, Li Guodong, Qiao Rui, Li Xinlei, Xu Jie, Cao Yu

Coal Geology & Exploration

Objective Mine pressure prediction represents an important means for early warning and management of disasters in coal seam roofs, serving as the prerequisite and foundation for safe production in intelligent mines. However, the complex and variable conditions of fully mechanized mining face lead to significant variations in the distribution of support pressure data acquired using electro-hydraulic control systems, complicating mine pressure prediction. Methods This study developed a Transformer-based mine pressure prediction model. Specifically, missing mine pressure data were filled using linear interpolation, and the data structure of mine pressure was adjusted using a sliding window algorithm. Based on the time-series …

Machine Learning In Peak Demand Forecasting: Foundations, Trends, And Insights, Shuang Dai, Fanlin Meng, Hongsheng Dai, Qian Wang, Xizhong Chen, Wenlei Bai, Peizhi Shi, Richard Allmendinger, Yuchen Zhang, Jian Liu

Electrical and Computer Engineering Faculty Research & Creative Works

Peak demand forecasting involves predicting the maximum electricity demand within a specific period, which plays a key role in maintaining the efficiency and stability of power systems. The rapid evolution of power systems, driven by advanced metering infrastructure, local energy applications such as electric vehicles, and the increasing adoption of intermittent renewable energy, has introduced greater randomness and reduced predictability in peak demand. Given the pressing need to address more diverse implementation requirements across different contexts, accurate and reliable peak demand forecasting has become increasingly important. To the best of our knowledge, this study is the first to provide a …

Enhancing Deep Learning And Workload Management In Online Education: The Power Of Scaffolded Weekly Assessments, Maryam Mohammad Zadeh, Rebecca Ferrari

International Journal of Teaching and Learning in Higher Education

This study investigates the use of scaffolded weekly assessments with individual feedback in promoting deep learning and managing workload among engineering students in online education. The research focuses on how these assessment strategies shape students’ learning approaches and workload distribution. The study involved the implementation of weekly assessments aligned with intended learning outcomes, complemented by personalized feedback. Data collection comprised student surveys and qualitative feedback to assess the impact on learning approaches and workload management. The qualitative results show that 91.9% of the students adopted deep learning, where only 8.1% engaging in surface learning. Students reported that this approach not …

Spatio-Temporal Swin Transformer-Based Flow-Solid Coupling Interaction Sequence Image Prediction Network, Changjun Zou, Zhiyu Ge, Chenxi Zhong

Journal of System Simulation

Abstract: To address limitations in modeling long-term dependencies and multi-scale features in fluidstructure interaction scenarios, a spatiotemporal deep learning model (SwinLSTM) integrating ConvLSTM and Swin Transformer is proposed. The model employs a gated spatiotemporal attention mechanism that dynamically embeds Swin Transformer's window-based multi-head self-attention into ConvLSTM's output gate, enabling adaptive temporal-spatial feature coupling, and designs a multi-level ConvLSTM framework to hierarchically capture complex spatiotemporal correlations. Experiments on a self-built fluid-interaction dataset show that our method achieves the highest PSNR and leading SSIM scores, with superior performance in preserving vortex details and boundary consistency. This work provides an efficient solution …

Fatigue Crack Length Estimation Using Acoustic Emissions Technique-Based Convolutional Neural Networks, Asaad Migot, Ahmed Saaudi, Roshan Joseph, Victor Giurgiutiu

Faculty Publications

Fatigue crack propagation is a critical failure mechanism in engineering structures, requiring meticulous monitoring for timely maintenance. This research introduces a deep learning framework for estimating fatigue fracture length in metallic plates through acoustic emission (AE) signals. AE waveforms recorded during crack growth are transformed into time-frequency images using the Choi–Williams distribution. First, a clustering system is developed to analyze the distribution of the AE image-based dataset. This system employs a CNN-based model to extract features from the input images. The AE dataset is then divided into three categories according to fatigue lengths using the K-means algorithm. Principal Component Analysis …

Ai For Life Sciences: From Geometric Protein Modeling To Multimodal Drug Design, Feng Jiang

Computer Science and Engineering Dissertations

Predicting biomolecular interactions, from immune recognition to drug–target binding, is a central problem in the life sciences and computational drug discovery. Deep learning has advanced this area, yet three challenges persist: the topology of large, highly imbalanced interaction networks; structural noise in computationally predicted protein models; and the integration of multimodal information such as functional text and taxonomic annotations. This dissertation develops a coherent set of models spanning immune complex prediction and small-molecule drug design: graph learning that addresses network topology and severe class imbalance; a noise-tolerant method that fuses predicted structures with evolutionary sequence features; and multimodal representation learning …

Long Short-Term Memory (Lstm) -Based Neural Network Model For Optimizing Composite Manufacturing Process Using Autoclave, Sourav Bolar, Steven Corns, Nayan Pundhir, Kumbla Chandrashekhara

Engineering Management and Systems Engineering Faculty Research & Creative Works

Producing high-quality fiber-reinforced composites requires precise temperature control during autoclave curing, as even small variations can lead to defects that compromise strength and reliability. At the same time, manufacturers aim to reduce energy use and shorten curing cycles without sacrificing material performance. To address these challenges, this study develops a data-driven Long Short-Term Memory (LSTM) neural network model capable of forecasting temperature evolution inside the autoclave throughout the curing cycle. The model is trained on time-series temperature data collected from multiple sensing locations, enabling it to learn the spatial and temporal trends that govern heat flow during curing. Data augmentation …

Code-Net++: An Attention-Guided Deep Learning Framework With Grad-Cam-Based Explainability For Covid-19 Detection Using Chest X-Ray Images, Fareesa Amina, Dr Krishnanaik Vankdoth

Mansoura Engineering Journal

Chest radiograph imaging has emerged as a practical and scalable diagnostic modality for respiratory diseases, including COVID-19. However, accurate discrimination of COVID-19 manifestations from other pulmonary abnormalities remains challenging because of low contrast, imaging noise, and overlapping radiographic patterns. This work presents CODE-NET++, an enhanced attention-guided deep learning framework with Grad-CAM-based explainability for reliable COVID-19 detection using chest X-ray images. The proposed framework integrates adaptive trilateral filtering for image enhancement, Reverse Edge Attention Network (RE-Net) for lesion-aware segmentation, and an Enhanced LinkNet architecture with dilated convolutions for multiscale feature extraction and classification. Grad-CAM-based explainable artificial intelligence visualization is incorporated to …

A Hybrid Cnn-Lstm Surrogate Model For Hyper-Resolution Spatiotemporal Flood Forecasting In Norfolk, Virginia, Yidi Wang, Jonathan L. Goodall, Chetan Kumar, Diana Mcspadden, Sergio A. Barbosa, Binata Roy, Ali Shahabi, Navid Tahvildari

Data Science Faculty Publications

Study region

Norfolk, Virginia, United States

Study focus

Accurate and timely flood forecasting is essential for enhancing resilience in coastal urban areas in the context of increasing frequency and intensity of rainfall, sea level rise and urbanization. This study presents a hybrid deep learning-based surrogate model that integrates Convolutional Neural Networks (CNN) and Long Short-Term Memory (LSTM) networks to enable real-time spatiotemporal flood forecasting. The model leverages CNN to capture spatial features from inputs such as elevation and Topographic Wetness Index (TWI), while LSTM processes time-series inputs of rainfall and tide data to capture temporal features.

New hydrologic insights for …

Dino-Lg: Enhancing Vision Transformers With Label Guidance For Coronary Artery Calcium Detection, Mahmut Selman Gokmen, Caner Ozcan, Moneera N. Haque, Steve W. Leung, Seth Parker, Brent Seales, Cody Bumgardner

Biomedical Engineering Faculty Publications

Coronary artery disease (CAD), one of the leading causes of mortality worldwide, necessitates effective risk assessment strategies, with coronary artery calcium (CAC) scoring via computed tomography (CT) being a key method for prevention. Traditional methods, primarily based on UNET architectures implemented on pre-built models, face challenges like the scarcity of annotated CT scans containing CAC and imbalanced datasets, leading to reduced performance in segmentation and scoring tasks. In this study, we address these limitations by introducing DINO-LG, a novel label-guided extension of DINO (self-distillation with no labels) that incorporates targeted augmentation on annotated calcified regions during self-supervised pre-training. Our three-stage …

Hybrid Model For Phishing Website Detection Using Transfer Learning, Atul Dubal, Mansi Subhedar, Santosh Dhamala, Manasi Patil

ASEAN Journal on Science and Technology for Development

The rapid digitization of human activities has intensified reliance on internet-based platforms, creating fertile ground for cybercriminal exploits such as phishing. Despite advancements in detection mechanisms, phishing attacks continue to evolve, leveraging sophisticated visual mimicry to deceive users. This paper proposes a robust vision-based phishing detection system using ensemble deep learning to analyse webpage screenshots. The framework integrates transfer learning with pre-trained VGG16 and DenseNet121 models, extracting complementary low-level texture features (edges, gradients) and high-level hierarchical patterns (logos, layouts). These features are fused through a custom classifier with dropout regularization to mitigate overfitting. A balanced dataset of 3,000 webpage screenshots …

Deep Learning Based High-Resolution Electromagnetic Inversion Imaging Using Deep Convolutional Double-Module Structure, He Ming Yao, Shiji Song, Lijun Jiang, Michael Ng

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a novel deep learning (DL) approach has been proposed to realize high-resolution electromagnetic (EM) inversion imaging. The newly proposed approach is based on the deep convolutional double-module structure (DCDMS), consisting of the pixel-interpolating module and the corresponding quality-improving module. While the pixel-interpolating module roughly increases the 'resolution' of the initial input, the following quality-improving module realizes quantitative EM imaging in high resolution. The input of the proposed DCDMS adopts the mixed input scheme, consisting of the received EM scattered field and the initial reconstruction in much low resolution computed from Gauss-Newton method. The output of the proposed …

Deep Learning Approach For Microwave Imaging Based On Deep Convolutional Asymmetric Encoder-Decoder Structure And Physics-Induced Loss, He Ming Yao, Shiji Song, Michael Kwok Po Ng, Lijun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, we introduce an innovative deep learning (DL) methodology designed for real-time quantitative microwave imaging (MWI). Our approach is centered around the utilization of a deep convolutional asymmetric encoder-decoder structure (DCAEDS), which requires only a single-frequency far-field measurement of the electromagnetic (EM) scattered field as input and subsequently predicts the contrasts (permittivities) of the target materials. During the offline training process, we incorporate an EM forward solver specifically crafted to compute the EM scattered field generated by the predicted target contrasts (permittivities) produced by the DCAEDS. The DCAEDS is seamlessly integrated with this EM forward solver to optimize …

Sustainable Nutrient Management Opportunities For Small Communities In The U.S. With Lagoon Wastewater Treatment Systems, Denis Sigei Ruto

Graduate Theses, Dissertations, and Problem Reports (ETD)

Lagoon wastewater treatment systems are among the most widely used secondary treatment technologies serving small and rural communities in the United States due to their low capital and operating costs, minimal energy requirements, and operational simplicity. While effective for removal of organic matter and suspended solids, most lagoon systems were not designed to achieve advanced nutrient removal. As regulatory priorities increasingly emphasize control of total nitrogen and total phosphorus to protect receiving waters and public health, lagoon-dependent communities face growing compliance challenges. These challenges are exacerbated by aging infrastructure, limited technical capacity, financial constraints, and insufficient infrastructure data, highlighting the …

Deep Learning-Based Co-Current Upward Gas-Liquid Two-Phase Flow Regime Identification In An Annular Conduit, Joshua Robert Macomber

Graduate Theses, Dissertations, and Problem Reports (ETD)

Flow regime identification in co-current upward gas-liquid flow through annular conduits remains a significant challenge in petroleum engineering, with major safety and operational implications. It is also important across industries involving the transport of multiphase fluids. Misidentifying flow regimes can introduce major operational risk, yet regime boundaries in annular gas-liquid flow are often visually complex and context dependent.

The objective of this study was to evaluate the utility of convolutional neural network (CNN) classifiers for flow regime identification. The CNN was trained using annular flow image dataset published by Texas A&M University. The dataset consists of approximately 947 RGB images …

Advancing Ultrahigh Carbon Steel Characterization: A Metaheuristic-Tuned Deep Learning Approach, Walaa Omar El-Farouk Badr, Hossam El-Din Mostafa, Rania Elbana

Mansoura Engineering Journal

Accurate classification of ultrahigh carbon steel (UHCS) microstructures is essential for elucidating processing-structure-property relationships and enhancing material performance. While convolutional neural networks (CNNs) offer powerful automated classification, navigating their complex, high-dimensional hyperparameter spaces present a significant computational bottleneck. To advance automated materials characterization, this study proposes a metaheuristic-tuned deep learning approach for robust and efficient microstructure classification. Two architectures, VGG16 and MobileNetV2, were evaluated under both pretrained and fine-tuned configurations, with Particle Swarm Optimization (PSO), Genetic Algorithm (GA), and Ant Colony Optimization (ACO) applied for systematic hyperparameter tuning. Results show that GA substantially improves the performance of fine-tuned VGG16, achieving …

Physics-Informed Temperature Prediction Of Lithium-Ion Batteries Using Decomposition-Enhanced Lstm And Bilstm Models, Seyed Saeed Madani, Yasmin Shabeer, Michael Fowler, Satyam Panchal, Carlos Ziebert, Hicham Chaoui, François Allard

Electrical & Computer Engineering Faculty Publications

Accurately forecasting the operating temperature of lithium-ion batteries (LIBs) is essential for preventing thermal runaway, extending service life, and ensuring the safe operation of electric vehicles and stationary energy-storage systems. This work introduces a unified, physics-informed, and data-driven temperature-prediction framework that integrates mathematically governed preprocessing, electrothermal decomposition, and sequential deep learning architectures. The methodology systematically applies the governing relations to convert raw temperature measurements into trend, seasonal, and residual components, thereby isolating long-term thermal accumulation, reversible entropy-driven oscillations, and irreversible resistive heating. These physically interpretable signatures serve as structured inputs to machine learning and deep learning models trained on temporally …

Digital Twin Technologies For Battery Systems: Advancements, Applications, And Future Directions, Seyed Saeed Madani, Yasmin Shabeer, Michael Fowler, Satyam Panchal, Carlos Ziebert, Hicham Chaoui, François Allard

Electrical & Computer Engineering Faculty Publications

The relationships among deep learning, edge computing, artificial intelligence (AI), and the most recent advancements in digital twin (DT) technology for battery energy storage systems are discussed in this paper. The study highlights the need for improved cloud-edge coordination, AI model development, and stronger cybersecurity features by demonstrating real-world applications of digital twin technology in electric vehicles (EVs), aircraft, and grid storage. It also described DT-based structures for fault detection, real-time monitoring, and optimization through standardization and battery management system (BMS) fusion. Because DT-based solutions for distributed energy resources (DERs) offer improved energy management systems, various studies have been conducted …

Adaptive Self-Attention For Enhanced Segmentation Of Adult Gliomas In Multi-Modal Mri, Evan P. Savaria, Jiangwen Sun

Computer Science Faculty Publications

Every year there are an estimated 80,000–90,000 new glioma cases, highlighting the need for reliable imaging-based decision support. Although deep learning has improved tumor sub-region segmentation, many state-of-the-art models fail to fully capture complementary information across T1, T1Gd, T2, and FLAIR MRI modalities and often operate as “black boxes,” limiting physician trust when precise delineation is critical for surgical planning, radiation targeting, and treatment monitoring. To address these limitations, we propose AIMS, an Adaptive Integrated Multi-Modal Segmentation framework that maintains modality-specific feature streams and employs adaptive self-attention within a hierarchical CNN-Transformer architecture to prioritize and fuse multi-modal MRI features. We …

Applying Machine Learning Techniques For Early Detection Of Cyber Attacks On Iot Devices, Noor Adnan Allamy

Al-Esraa University College Journal for Engineering Sciences

This research designs, implements, and evaluates a machine learning-based framework for the early detection of cyber attacks targeting Internet of Things (IoT) devices, with a specific focus on the context and challenges present in Iraq. The study conducts a comparative analysis of three supervised learning algorithms—Support Vector Machine (SVM), Random Forest (RF), and Deep Neural Networks (DNN)—using a combination of benchmark datasets (NSL-KDD, CIC-IDS-2017, Bot-IoT) and a synthesized dataset adapted to simulate the Iraqi threat landscape. Key performance metrics, including accuracy, precision, recall, and F1-score, were used for evaluation. The proposed Random Forest model demonstrated superior performance, achieving an accuracy …

Skeleton-Based Human Action Recognition Using Spatio-Temporal Latent Features With A Gcn Model, Avazjon Marakhimov, Kabul Khudaybergenov, Mominov Zakhriddin

Chemical Technology, Control and Management

Owing to its resilience to visual noise and viewpoint variations, skeleton-based analysis has become a cornerstone of human action recognition research. Despite its practical significance, existing methodologies often suffer from a reliance on single-stream skeletal representations, which fail to encompass the full complexity of action features. This study introduces Latent Features for Human Action Recognition (LFHAR), a novel architecture designed to overcome these limitations by utilizing diverse spatio-temporal latent representations for improved feature extraction. The approach applies graph-based transformations to individual skeletal frames in temporal sequences, then arranges the derived graph features into spatio-temporal matrices. Evaluation of standard datasets demonstrates …

Enhanced Generative Convolutional Networks: A Hybrid Algorithm For Refinement Video Classification, Dalal Thair Mahjoub, Hala Bahjat Abdulwahab, Kesra Nermend

Journal of Soft Computing and Computer Applications

Video classification is a vital area of research due to the growing volume of video content in various applications. Accurate category across various resolutions poses challenges, which include adapting to scaling, resizing, and compression. Therefore, this paper introduces an innovative Generative Convolutional Network (GCN) set of rules tailored for multi-resolution video classes. The proposed GCN model utilizes Convolutional Neural Networks (CNNs) combined with generative modeling to enhance the extraction of functions across varying video resolutions, which is crucial for maintaining class robustness in the face of common video adjustments, such as scaling, resizing, and compression. In contrast, traditional fashions frequently …

Review Of Video Steganography By Using Deep Learning Methods: Datasets, Techniques, And Evaluations, Noor Fahem Sahib, Soukaena Hassan Hashem, Ekhlas Falih Naser

Journal of Soft Computing and Computer Applications

The growing prevalence of cyber threats, including fraud and attacks, has intensified the demand for secure methods of safeguarding confidential information exchanged between users. As telecommunications increasingly rely on multimedia data, video steganography has become a prominent technique to address these concerns. By embedding sensitive data within video files, this approach enhances protection against unauthorized access and common internet-based attacks, offering a robust layer of security in an era of escalating digital risks. With the introduction of Deep Learning (DL) steganography methods recently, video steganography can be defined as a rapidly developing subject within information security. This study provides a …

Research On Infrared And Visible Light Fusion Method Based On Resnet-50 And Laplacian Filtering, Xiao Wang, Xiangyang Li, Feng Liang, Zhili Zhang

Journal of System Simulation

Abstract: In order to solve the problem that existing infrared and visible light image fusion techniques often suffer from artifacts caused by insufficient contrast, spectral distortion, and high computational complexity, a fusion framework based on ResNet-50 and Laplacian filtering was proposed. ResNet-50 was used to extract shallow and deep features, followed by multi-scale feature fusion. Laplacian filtering was applied to optimize feature information, and an automatic discriminator was introduced to further improve the fusion effect. Simulation results show that, compared with comparison algorithms, the proposed method achieves an average increase of 2.71% and 2.16% in information entropy, 5.98% and …

Coal Body Structure Identification Method Based On Bayesian-Optimized Cnn-Bilstm-Attention, Bian Huiyuan, Ji Jiajun, Duan Chaowei, Zhou Jun, Li Kun, Ma Yuhan

Coal Geology & Exploration

Background Coal-bearing basins contain primary and tectonically deformed coals due to multistage tectonic deformations. However, the gas-bearing properties of coal seams differ significantly due to varying pore and fracture densities, permeability, and mechanical properties. This makes coal structure assessment critical to coalbed methane (CBM) exploration and production. Objective and Method To enhance the accuracy and intelligence of coal structure identification, this study constructed a CNN-BiLSTM-Attention hybrid model that integrated a Bayesian optimization strategy. This model allowed for efficient fusion and representation of multi-scale log data by combining the local feature extraction capability of the convolutional neural network (CNN), the temporal …

Construction And Application Of Knowledge Graph For Quality Management In Bridge Pile Engineering, Fang Xiaofeng, Dong Runhao, Gu Yanke, Pan Yanran

Journal of China & Foreign Highway

To enhance the efficiency of quality management in bridge pile foundation construction,this study constructed a knowledge graph applicable to the construction field of bridge pile foundation engineering to enable systematic representation and intelligent organization of knowledge.A methodology combining top-down design and bottom-up design was adopted to develop a framework for constructing a knowledge graph for the quality management of bridge pile foundation construction that encompasses both the schema layer and the data layer.The schema layer was established through ontology modeling,clarifying the concept categories,hierarchical structure,and their attribute relationships.The data layer employed a bidirectional long short-term memory (BiLSTM ) network integrated with …

Bridge Damage Detection And Bim Localization Methods Based On Image Recognition, Li Yu, Guo Hongjun

Journal of China & Foreign Highway

To overcome insufficient information of 2D detection data in traditional bridge maintenance,which hinders precise decision-making,this study proposed an automated method based on deep learning and structure from motion (SfM ) technology,which realized the complete process from image recognition to the accurate mapping of damage information in a building information model (BIM ).First,the YOLOv 8 deep learning model was used to automatically detect bridge surface damage.Second,the SfM technology was applied for the local 3D reconstruction of the damage area and to determine the 3D coordinates of the damage.Then,the least squares method was used to align the local coordinate system with the …

Green Ai-Enhanced Deep Learning Model For Breast Cancer Detection And Classification In Mammography Images: Bc-Net-512, Nesma Abd El-Mawla, Mohamed A. Berbar, Nawal A. El-Fishawy, Mohamed A. El-Rashidy

Mansoura Engineering Journal

This study champions a sustainable approach for developing a Deep Learning (DL) model for medical image analysis, specifically focusing on breast cancer (BC) detection in mammograms. By prioritizing low-computing algorithms to achieve high diagnostic accuracy while minimizing the model's environmental footprint, that aligns with the principles of Green AI. In this paper, an innovative architecture called BC-Net-512 was constructed for the classification of BC mammography. It is composed of lightweight Convolutional Neural Network (CNN) blocks for texture, density, and structure feature extraction and detection, a thin, fully connected layer for learning complex patterns and correlations in the extracted features, and …