Engineering Commons^™

A Simulation Way To Investigate The Reason For Congestion In Urban——A Case Study In Hohhot China, Junqing Wang, Hong Yang, Yuan Zhu, Qingwen Pu, Shunlai Cui

College of Engineering & Technology (Batten) Posters

In the case of high density traffic flow, traditional traffic data statistical analysis methods, which not only have certain errors and lead to inaccurate data, but also have many limitations such as labor consumption, can no longer meet the demand for traffic analysis. Drones for traffic data, based on an aerial bird's-eye view, no offset, and error-free complete statistics of urban road shooting section of all data, while greatly reducing cost consumption. A multi-dimensional simulation model is established for the UAV data to the Hohhot central urban area's road simulation platform. This project will test and explore multidimensional data in …

Investigating The Impacts Of Connected Vehicles On Driving Aggressiveness And Situational Awareness In Highway Crash Scenarios: A Driving Simulator Study, Abdalziz Alruwaili

College of Engineering & Technology (Batten) Posters

Psychological factors such as aggressiveness and situational awareness can impact driving performance. Connected vehicles (CV), equipped with advanced sensors and able to communicate safety messages to drivers, have the potential to influence driving performance by altering drivers’ aggressiveness and situational awareness. This paper aims to investigate the impacts of the CVs on driving aggressiveness and situational awareness in highway crash scenarios where a primary crash has already occurred, and a second crash may occur as a result. To achieve this goal, a driving simulator experiment was conducted, and questionnaires focused on driving aggressiveness and CV effectiveness were distributed. Structural equation …

The Effects Of Disinformation Upon National Attitudes Towards The Eu And Its Institutions, Alex Murphy

Dissertations

This work explores the effects of misinformation and disinformation upon national attitudes towards the EU. Several nations, in particular the Russian Federation, have been working for decades to spread narratives that debase the political processes of healthy democracies around the world. There is strong evidence to show that extensive efforts have been made to disrupt the inner workings and overall membership of the EU, to support disruptive policies in the United States such that political deadlock is maintained indefinitely. These efforts are largely based on the spreading of misinformation and disinformation across social networks that have done very little to …

Jcati Carbon Fiber Recycler- Fiber Conveyance, Taylor Miller

All Undergraduate Projects

Sponsored by the Joint Center for Aerospace Technology Innovation (JCATI), this project stems from a partnership between Central Washington University’s Mechanical Engineering Technology program and The Boeing Company. The goal of this partnership was to create a device that repurposes carbon fiber from wing trimmings from the 777. The device features four different students’ projects including the crusher, shredder, oven heating system, and the fiber conveyance system; the focus of this project. The JCATI Carbon Fiber Recycler needed a device to transport material from the shredder to the oven to make for an easier, more seamless production process. To solve …

Rc Baja – Drivetrain & Chassis, Tyler Clerf

All Undergraduate Projects

Two of the most important subsystems of a vehicle are the drivetrain and chassis. The drivetrain is responsible for transmitting the power from the power source to the wheels. The chassis provides a sturdy host for all components. An optimal drivetrain will most often reduce the output speed and increase the torque from the motor, while minimizing losses. The ideal chassis will have minimal deflection with easy-to-use mounting points. The vehicle being created will compete in the CWU RC BAJA competition as well.

The analyses are the foundation of any engineering project. For this project Mechanical Design, Statics, and Dynamics …

Balsa Wood Bridge Senior Project, Ryan Moe

All Undergraduate Projects

For all of human history, people have been working to increase efficiency. This project followed in that pursuit by forcing engineers to create a 400 mm long bridge out of only balsa wood and glue that could withstand over 20 kgs of force with the bridge weighing a maximum of only 85 grams. The bridge also needed to have a lifting mechanism to raise it 140 mm above the starting position.

To accomplish this task, a strong truss needed to be built. Balsa wood is strong in compression so a truss with more beams in compression was used. Statics was …

Nasa Student Launch Payload Deployment, Kallysta Ray

All Undergraduate Projects

For the NASA Student Launch Competition, a deployment system was created to deploy the payload of the rocket. To accomplish this the deployment system was designed, analyzed, manufactured, and tested to meet the requirements from the NASA Competition. The requirements included deployment of the payload as well as staying within 4 pounds. The project requirements were researched and each of the proposed components had analyses completed. The analyses included weight calculations, stress, and deflection analyses using statics, mechanics of materials, and dynamics. There were many discussions throughout the project between the teammates to ensure all components of the payload and …

Jack And Alex Rc-Baja, Alex Vornbrock

All Undergraduate Projects

Teams of two mechanical engineering students were tasked with the construction of an RC Baja car qualified by the rules and regulations of the Baja competition as well as specifications set by the individual team member for their portion of the vehicle. This proposal focuses on the Chassis and Drivetrain of the vehicle while team member Jack Stutz oversaw the steering and suspension. Teams will compete against each other in various modes to determine the best vehicles of the competitors. The chassis was made of standard aluminum, the remaining parts made by the students were made with PLA; both materials …

F-1/10th, Max Otterby

All Undergraduate Projects

Team members Nate and Max were tasked with designing, building, and testing an RC controlled vehicle to complete in a competition. This competition consists of an off-road course, on road course, and an obstacle course. The team set out to win this competition by creating a more than capable vehicle for the competition. This engineering report will cover Max’s contributions to the project.

The team was split into two roles. Max taking on steering and suspension, Nate taking on drivetrain and chassis. Each team member took responsibility for the design and construction of those systems. The design chosen was based …

Nasa Student Launch - Payload, Eli Kirk

All Undergraduate Projects

A team of mechanical engineering, physics, and computer science students from Central Washington University have constructed a fully functional subscale model rocket to be flown at the NASA Student Launch competition. The rocket’s payload was designed to open the nose cone and take a photo of the rocket’s surroundings after descending from the launch. Smaller parts were constructed through machining and 3D printing that will be added to the purchased major component, the linear actuator, in order to perform the required tasks. These tasks are signaled by an attached electronics board, which will receive an RF command remotely, execute code, …

Jack & Alex Rc Baja, Jack Stutz

All Undergraduate Projects

There are paramount necessities to build an RC car such as the steering and suspension. Without either, the vehicle will not be able to ascertain basic movement characteristics. The team will compete in the RC Baja competition with the other students which will have various challenges and obstacles that they will endure. The device must be able to complete tests that will prove competence for the competition. By using knowledge of prior classes and experience, the team will produce a functional device for the event. Mechanics of materials and statics were used to determine the bending strength of the control …

Rc Baja Suspension And Steering, Garrett Bailey

All Undergraduate Projects

The RC Baja team set out to engineer and construct a working remote-control device that can compete in the ASME Baja Competition. The students have a focus on either suspension and steering or drivetrain and chassis. This report is centered on the suspension and steering. First, multiple analyses were completed using engineering methods such as mechanical design, statics, strengths of materials, and dynamics for parts of the device. The calculations found in the analysis are then used to create designs for the parts so that they will meet the requirements and be successful in the competition. After the parts are …

Rc Baja 2023 Drivetrain And Chassis, Nathan Norby

All Undergraduate Projects

Students’ objective this quarter was to design a remote-controlled vehicle that utilizes a 4-link rear suspension, an I-beam front suspension, the ability to withstand a substantial front impact and several gearing options. The team also used several agreed upon design requirements to quantify the results of the objective.

To meet these objectives students followed a strict engineering method. Students split into a team’s divided the work into two sections. Max was responsible for the suspension and steering and Nathan was responsible for the chassis and drivetrain. Methods included engineering analysis which used mechanics of materials, static analysis, dynamic analysis, and …

Balsa Wood Bridge, Daniel R. Netro

All Undergraduate Projects

When building a bridge, there is a lot of criteria that need to be met so it can be functional. These criteria for this balsa bridge competition are what the bridge is made out of and can only weigh so much, the bridge must hold a certain amount of weight and not fail due to it, must allow a “vehicle” to go through the bridge and under it. For this bridge, the only material that can be used is balsa wood and any glue. With this, the strength of the material can be found and multiple calculations can be used …

Jcati Carbon Fiber Recycler: Oven Heating System, Kezyah Mantanona

All Undergraduate Projects

Central Washington University Mechanical Engineering Technology students are working with the Joint Center for Aerospace Technology Innovation (JCATI) to create a device that recycles carbon fiber wing trimmings produced by the wing manufacturing process for the Boeing 777 airplanes. The solution to this problem was to utilize crushing, shredding, and pyrolysis to remove the resin from the composite material and provide carbon fiber that can be repurposed. This project focuses on both the Oven Enclosure which will house the Oven Heating System as well as the heating elements and control circuit that are responsible for allowing the material to reach …

Advanced Microstructural Characterization Of Functionally Graded Dental Ceramic Material For Materials-Informed Finishing, Angani Vigneswaran

Theses and Dissertations--Manufacturing Systems Engineering

Yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) has gained popularity as the choice of material for dental prosthetics. Ivoclar Vivadent’s IPS e.max ZirCAD Prime dental ceramic incorporates a unique gradient technology that varies the yttria content over the thickness of the material. The top layer is composed of 5Y-TZP which is desired for its optical properties while the bottom layer is composed of a much stronger 3Y-TZP. In between the two layers, 5Y-TZP and 3Y-TZP are mixed to form a transition layer. Varying the amount of yttria allows for more esthetically pleasing translucency in the visible areas of the restoration without compromising …

Radio-Controlled Baja Car, Jaxx Brown

All Undergraduate Projects

The Central Washington University RC Baja competition tests students’ skills in engineering in a matter of ability to design, construct and test an RC car. The objective of this senior project is to manufacture efficient suspension and steering systems for an RC vehicle and compete at the end of the school year against other students’ vehicles. Two races will be conducted during the competition, the RC vehicle will compete in a slalom-and-sprint and a Baja. Using more than one manufacturing method and material was expected of students to create the steering and suspension systems. Through CAD software and 3D printers …

Rc Baja Project: Suspension And Steering, Chance Hills

All Undergraduate Projects

Students designed and manufactured an RC Baja car to compete in the ASME RC Baja competition. The goal of this section of the project was to create a steering system and suspension system that work together properly with a partner’s chassis/drive train systems during tests and competitions. The car needed to be able to complete in the three events, which are a drag race, a solemn course, and the Baja event. The RC will also be evaluated on the ability to climb inclines, top speed, and withstand the drop test. This proposal will explain all the details and effort that …

Balsa Wood Bridge, Minh Le

All Undergraduate Projects

This senior paper outlined the design and construction of an articulating balsa wood bridge. Meeting specific criteria to hold 20kg of weight hanging from the center of the bridge. Also allowing a 32 mm wide by 25 mm high object to traverse the road deck of the bridge. The construction criteria required the use of only balsa wood and glue for the structural support, with exceptions for articulation components. The total weight of the bridge must not exceed 85 grams.

To achieve these goals, the bridge was designed using static equilibrium and material strength equations to span a 470mm body …

Generation Z And Their Use Of Learning Management System In Programming Courses, Ole Schultz, Tomasz Blaszczyk

Practice Papers

Generation Z students have grown up with ICT (information and communication technology) and are therefore used to being online more or less simultaneously on different types of media. Universities have different kinds of Learning Management Systems (LMS) with different possibilities for engagement. In the Electrical Engineering B. Eng. program at the Technical University of Denmark (DTU) we use a system called Learn. It has features for setting up individual study plans as well as common plans. Features such as surveys, quizzes, peer reviews are built in. We are interested in the students' use of the LMS, their engagement and the …

Virtual Industry Visits, Cian Farrell

Articles

Cian Farrell of Technological University Dublin describes a virtual educational approach trialled during the Covid-19 pandemic to engage students during a period of remote learning and educate them on industry processes and practices. Virtual industry visits saw students receive online briefings and tours of manufacturing plants and construction sites from industry representatives to complement their taught modules. The virtual visits have continued since Covid restrictions eased as part of a hybrid approach to learning that increases student exposure to real-life projects. The initiative won the Institution of Structural Engineers Excellence in Structural Engineering Education Award in 2022.

(3-Aminopropyl) Triethoxysilane-Based Immobilization Of Pt/Wo3 On A Microfiber Sensor For High Sensitivity Hydrogen Sensing, Qiao Gao, Bin Liu, Juan Liu, Shengpeng Wan, Tao Wu, Xing-Dao He, Ping Lu, Jinhui Yuan, Renli Ma, Zabih Ghassemlooy, Gerald Farrell, Qiang Wu

Articles

A novel high stability hydrogen sensor based on a Pt/WO3 coated single-mode tapered-no-core single-mode (STNCS) fiber interferometer is proposed and experimentally studied. The STNCS structure is treated by (3-Aminopropyl) triethoxysilane (APTES) and then coated with Pt/WO3 nanorods. Compared to the traditional method of using poly (dimethylsiloxane) (PDMS) to adhere Pt/WO3 nanorods on the fiber surface, the APTES modified fiber forms strong covalent bonds with Pt/WO3 with stronger adhesion to the fiber surface, resulting in improved long-term stability. Experimental results show that the sensitivity of the sensor varies from -31.05 nm/% to -4.30 nm/% as the hydrogen concentration increases from 0 …

Deactivation Effects Of Tb3+ On Ho3+ Emission In Fluoroindate Glasses For 3.9 Μm Laser Applications, Zhi Zhang, Zhuowei Cheng, Ruicong Wang, Shunbin Wang, Gerald Farrell, Shijie Jia, Pengfei Wang

Articles

A series of Ho3+/Tb3+ co-doped fluoroindate glasses with good thermal stability have been synthesized to study the deactivation effects of Tb3+ on the Ho3+: 3.9 μm emission. Efficient 3.9 μm emission enhancement is obtained under excitation by an 888 nm laser diode (LD). The Judd-Ofelt (J-O) intensity parameters and radiative properties are calculated to evaluate the spectroscopic properties. Possible energy transfer processes resulting in emission reinforcement are discussed. A higher spontaneous transition probability and larger peak emission cross section are achieved with the inclusion of Tb3+. This analysis supports the conclusion that Ho3+/Tb3+ co-doped fluoroindate glass is a potentially useful …

High-Sensitivity Vector Bend Sensor Based On A Fiber Directional Coupler Inscribed By A Femtosecond Laser, Ke Tian, Mingyuan Zhang, Chuanzhein Zhao, Huibin Li, Shilong Li, Yuxuan Jiang, Gerald Farrell, Pengfei Wang

Articles

In this Letter, we demonstrate a high-sensitivity vector bend sensor based on a fiber directional coupler. The fiber directional coupler is composed of two parallel waveguides inscribed within a no-core fiber (NCF) by a femtosecond laser. Since the two written waveguides have closely matched refractive indices and geometries, the transmission spectrum of the fiber directional coupler possesses periodic resonant dips. Such a fiber directional coupler exhibits a good bending-dependent spectral shift response due to its asymmetric structure. Experimental results show that bending sensitivities of -97.11 nm/m-1 and 58.22 nm/m-1 are achieved for the 0° and 180° orientations in the curvature …

Efficient 2075-Nm Laser Emission From Ho3+-Doped Fluorotellurite Glass In A Compact All-Fiber Structure, Liyuan Wang, Xiaotong Zhao, Nian Lv, Niannian Xu, Zhenrui Li, Gerald Farrell, Shunbin Wang, Pengfei Wang

Articles

In this Letter, we report an Ho3+-doped fluorotellurite glass all-fiber laser at 2075 nm. The gain fiber is pumped in-band with a 1976-nm fiber laser and connected by fusion splicing. A high-quality fusion splicing point with a loss of < 0.1 dB was obtained by finely adjusting the splicing power and offset. In addition, by optimizing the writing parameters, a third-order fiber Bragg grating (FBG) with a reflectivity of 98% was achieved at 2075 nm using the femtosecond laser direct-writing method. Using the FBG as the laser cavity mirror and a relatively short 28-cm-long home-made Ho3+-doped fluorotellurite fiber as the laser medium, a laser with a maximum unsaturated output power of 7.33 W was obtained, and the corresponding slope efficiency was as high as 93.4%. The first, to the best of our knowledge, demonstration of the fluorotellurite glass all-fiber ∼2.1-µm laser presented in this work may pave the way for a high-power 2.1-µm fiber laser with a compact structure.

Development Of A Hospital Discharge Planning System Augmented With A Neural Clinical Decision Support Engine, David Mulqueen

Dissertations

The process of discharging patients from a tertiary care hospital, is one of the key activities to ensure the efficient and effective operation of a hospital. However, the decision to discharge a patient from a hospital is complex, as it requires multiple interactions with nurses, family, consultants, health information records and doctors, which can be very time consuming and prone to error. This thesis descries how a neural network based Clinical Decision Support system can be developed, to help in the decision making process and dramatically reduce the time and effort in running the discharge process in a hospital. A …

Gamelan Gong Directivity Dataset, Samuel D. Bellows, Dallin T. Harwood, Kent L. Gee, Micah R. Shepherd

Directivity

No abstract provided.

Forecasting Covid-19 Cases Using Dynamic Time Warping And Incremental Machine Learning Methods, Luis Miralles-Pechuán, Ankit Kumar, Andres L. Suarez-Cetrulo

Articles

The investment of time and resources for developing better strategies is key to dealing with future pandemics. In this work, we recreated the situation of COVID-19 across the year 2020, when the pandemic started spreading worldwide. We conducted experiments to predict the coronavirus cases for the 50 countries with the most cases during 2020. We compared the performance of state-of-the-art machine learning algorithms, such as long-short-term memory networks, against that of online incremental machine learning algorithms. To find the best strategy, we performed experiments to test three different approaches. In the first approach (single-country), we trained each model using data …

The Impact Of Precipitation As An Adverse Weather Condition On Transportation Construction In South Dakota, Akosua Ofosua Okyere-Addo

Civil and Environmental Engineering Graduate Students Plan B Capstone Projects

This research assessed the impact of precipitation as an adverse weather condition on the transportation construction in South Dakota. A statistical survey of the data from the National Oceanic and Atmospheric Administration was conducted on 554 original stations, which was reduced to 433 stations of them were in South Dakota, then reduced to 170 stations with 30-year data coverage higher than 70 %. Eventually, the data were reduced further for pilot study purposes to a final 10 stations used for analysis in this study. The objective of this study is to examine potential precipitation thresholds towards determination of related adverse …

Expression Optimization Of The Gst-Gfp Fusion Protein Through The Alteration Of Induction Conditions, Matthew J. Vaccaro

Honors Undergraduate Theses

This research sought to determine which induction condition resulted in the greatest GST-GFP fusion protein expression. It will hopefully serve as a guide for future researchers trying to produce their own recombinant protein containing GST and GFP-tags. The CDNB Enzyme Assay was used to determine the quantity of GST-GFP fusion protein present and tested three variables: IPTG concentration, duration, and temperature of induction. The findings showed that IPTG concentration, temperature, and induction duration all had a significant impact on protein expression. Induction temperatures of 20 °C and 25 °C showed better protein expression at IPTG concentrations of 1.0 mM IPTG …