Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2023

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 9751 - 9777 of 9777

Full-Text Articles in Engineering

Synthesis Of Sic Nanowires On Biochar Surfaces By A Simple Direct Method, Wasana Khongwong, Chumphol Busabok, Piyalak Ngernchuklin Jan 2023

Synthesis Of Sic Nanowires On Biochar Surfaces By A Simple Direct Method, Wasana Khongwong, Chumphol Busabok, Piyalak Ngernchuklin

Journal of Metals, Materials and Minerals

Demand for air filters is crucially required due to PM 2.5. So, SiC nanowire networks are directly grown on biochar surfaces that serve strength and filtering purposes. The nanowires were prepared by spraying silicon powder on Lesser bulrush and Grey sedge biochars which acted as carbon sources and heating up to 1300℃ to 1500℃ for 1 h in Ar atmosphere. As a result, silicon powder evaporated and diffused on biochar surfaces. Meanwhile, CO vapor was generated from biochar reacted with O2 in the chamber. The evaporated silicon reacted with both C(s) and CO(g) to form cubic SiC nanowires. At the …

Go to article

Polyol Method And Surface Functionalization Of Silver Nanowires Using Bovine Serum Albumin For Surface-Enhanced Raman Scattering Application, Khoa Tien Cao, Khoi Khac Tran, Hue Thi Do Jan 2023

Polyol Method And Surface Functionalization Of Silver Nanowires Using Bovine Serum Albumin For Surface-Enhanced Raman Scattering Application, Khoa Tien Cao, Khoi Khac Tran, Hue Thi Do

Journal of Metals, Materials and Minerals

Silver nanowires (AgNWs) with diverse applications are attracting the attention of many researchers around the world. In this study, we applied the polyol method to synthesize AgNWs based on Polyvinyl-pyrrolidone (PVP) average molecular weight of 360,000, ethylene glycol (EG), and AgNO3 precursor with a fresh AgCl preparation. To synthesize this material we first investigate optimal parameters through the influence of reaction temperature, time of creating AgNWs using plasmon absorption spectroscopy, and scanning electron microscope (SEM) images. The obtained AgNWs are high efficiency, large aspect ratio, and good dispersion in the solution. This sample continues to be conducted to surface functionalization …

Go to article

Growth Of Proton Conducting Strontium Cerate Composites, C. K. Shilpa, S. V. Jasira, V. P. Veena, K. M. Nissamudeen Jan 2023

Growth Of Proton Conducting Strontium Cerate Composites, C. K. Shilpa, S. V. Jasira, V. P. Veena, K. M. Nissamudeen

Journal of Metals, Materials and Minerals

The increased population and modern way of life have greatly depleted the effectiveness of traditional energy production methods. There is a strong demand for environmentally friendly and renewable alternatives to replace the old systems. Sustainable energy production systems have emerged as a vital replacement for the conventional use of fossil fuels. Among these, solid oxide fuel cells (SOFCs) play a significant role. Recently, researchers have developed electrolyte components for SOFCs using proton-conducting perovskites with excellent conductivity. This critical assessment presents a yearly overview of innovative strategies for utilizing doped strontium cerate perovskites in energy production systems, a novel approach. The …

Go to article

Dispersion Mechanism Of Nanoparticles And Its Role On Mechanical, Thermal And Electrical Properties Of Epoxy Nanocomposites - A Review, Baljit Singh, Akash Mohanty, Amit Kumar Srivastava, Ajay Singh Jan 2023

Dispersion Mechanism Of Nanoparticles And Its Role On Mechanical, Thermal And Electrical Properties Of Epoxy Nanocomposites - A Review, Baljit Singh, Akash Mohanty, Amit Kumar Srivastava, Ajay Singh

Journal of Metals, Materials and Minerals

The combined effect of nano-reinforcements on the mechanical performance of nanocomposites, which are a novel class of epoxy matrix hybrid nanocomposites containing multiwall carbon nanotubes (MWCNT), graphene, and nanodiamonds (NDs), is drawing substantial attention from many research communities. The discussion concentrates on the dispersion techniques adopted for the preparation of epoxy composites containing different types of nanoparticles (3-D fillers, nanofibers, nanotubes, and plate-like fillers). This review paper covers the electrical, thermal, and mechanical properties of carbon nanotubes (CNTs), graphene, and nanodiamond-reinforced epoxy nanocomposites and correlates them with the topographical features, morphology, weight fraction, dispersion state, and surface functionalization of CNTs, …

Go to article

Review Of Materials, Functional Components, Fabrication Technologies And Assembling Characteristics For Polymer Electrolyte Membrane Fuel Cells (Pemfcs) – An Update, Arun Daya, Arputharaj Samson Nesaraj Jan 2023

Review Of Materials, Functional Components, Fabrication Technologies And Assembling Characteristics For Polymer Electrolyte Membrane Fuel Cells (Pemfcs) – An Update, Arun Daya, Arputharaj Samson Nesaraj

Journal of Metals, Materials and Minerals

Fuel cells use electrochemical processes to transform the chemical energy of a fuel into electrical energy, which is a key enabler for the shift to an H2-based economy. Because of their high energy conversion efficiency and low pollution emissions, fuel cells with polymer electrolyte membranes (PEMFCs) are regarded as being in frontline of commercialization for the transportation and automotive industries. However, there are two major hurdles to their future commercialization: cost and durability, which promote basic study and development of their components. In this article, we reviewed the materials, functional components, fabrication technologies and assembling characteristics related to PEMFCs. Platinum's …

Go to article

Structure And Chemical Durability Improvement Of Alkali Silicate Glass By Zirconium Dioxide And Erbium Oxide Addition, Ativit Denprawat, Kittipong Sinwanasarp, Pinit Kidkhunthod, Nattapol Laorodphan, Worapong Thiemsorn Jan 2023

Structure And Chemical Durability Improvement Of Alkali Silicate Glass By Zirconium Dioxide And Erbium Oxide Addition, Ativit Denprawat, Kittipong Sinwanasarp, Pinit Kidkhunthod, Nattapol Laorodphan, Worapong Thiemsorn

Journal of Metals, Materials and Minerals

Glass structure tailoring of alkali silicate glasses by addition of ZrO2 and Er2O3 is found to enhance the chemical durability of glasses. ZrO2 (x ranged between 5 mol% to 15 mol%) and Er2O3 (y ranged between 0.5 mol% to 1.5 mol%) were used to replace SiO2 and Na2O, respectively, in the glasses with the nominal composition of 10Li2O-(15-y)Na2O-10CaO-(65-x)SiO2-xZrO2-y Er2O3. The samples were prepared by conventional melt quenching technique. The structures of produced glasses were examined by X-ray absorption spectroscopy (XAS) and Raman spectroscopy. XAS spectra demonstrated that the oxidation numbers of Zr and Er ions were +4 and +3, respectively. …

Go to article

Fabrication Of Granular Foam Glass Aggregates From Soda Lime Silicate Glass Waste, Pat Sooksaen, Phumin Prakaisri, Pattraporn Teerapatpanid, Pathompong Puathawee Jan 2023

Fabrication Of Granular Foam Glass Aggregates From Soda Lime Silicate Glass Waste, Pat Sooksaen, Phumin Prakaisri, Pattraporn Teerapatpanid, Pathompong Puathawee

Journal of Metals, Materials and Minerals

Granular foam glass aggregates were fabricated from a soda lime silicate glass waste which utilized crude glycerol as a foaming agent and sodium silicate as a binder. The granulation and the foaming process were carried out by a granulator and an electric rotary furnace. The study investigated at first the foaming behavior of different foam glass formulations at various sintering temperatures. Three compositions were formulated which utilized glass powder at 85 wt%, 90 wt%, and 95 wt%, respectively. Sintering was carried out at temperatures from 800℃ to 1200℃ to evaluate for the foaming and melting characteristics. Foam glass with 90% …

Go to article

Study Of Corrosion Properties Of Carbon Steel, 304 And 316l Stainless Steels In Sulfuric Acid And Their Degradation Products, Eakapoj Khamme, Rachsak Sakdanuphab Jan 2023

Study Of Corrosion Properties Of Carbon Steel, 304 And 316l Stainless Steels In Sulfuric Acid And Their Degradation Products, Eakapoj Khamme, Rachsak Sakdanuphab

Journal of Metals, Materials and Minerals

In this study, corrosion properties of carbon steel and stainless steels, and degradation of sulfuric acid by the corrosion mechanism are presented. Carbon steel (CS), 304 stainless steel (SS304), and 316L stainless steel (SS316L) specimens were analyzed through their electrochemical response by using a potentiostat measurement. The specimens were submerged in concentrated 98 wt.% of H2SO4 acid for 0 day to 60 day. The degradation of H2SO4 was determined by its volume change, turbidity, and color due to the corrosion mechanism. Corrosion rate of CS, SS304 and SS316L specimens are 43.237 mm/year, 0.420 mm/year and 0.086 mm/year, respectively. After 60 …

Go to article

Quantum-Based First-Principles Study Of Gas Molecules (O2 , Co2 , No2 ) Interaction On Monolayer Germanene, Arief Hermanto, Harmon Prayogi, Ari Dwi Nugraheni, Juliasih Partini, Sholihun Sholihun Jan 2023

Quantum-Based First-Principles Study Of Gas Molecules (O2 , Co2 , No2 ) Interaction On Monolayer Germanene, Arief Hermanto, Harmon Prayogi, Ari Dwi Nugraheni, Juliasih Partini, Sholihun Sholihun

Journal of Metals, Materials and Minerals

We perform calculations of the adsorption energy of O2, CO2, and NO2 molecules on germanene by using the density functional theory (DFT). We find two favorable configurations for O2, the U-site and V-site configurations with similar adsorption energies of -4.10 and -4.32 eV. As for NO2, we find two favorable configurations, the T-site and DB-site configurations. The T-site configuration is 0.98 eV more stable than the IB-site one, and both configurations are chemically adsorbed by germanene. On the contrary for CO2, we find a T-site configuration with adsorption energy of 0.42 eV and the configuration physically adsorbed by germanene.

Go to article

Microstructure And Mechanical Properties Of 0.2c-3.9al-1.12mn-0.3mo Δ-Trip Steel As A Function Of Isothermal Bainitic Transformation Temperature, Mahsa Gholambargani, Yahya Palizdar, Ali Khanlakhani, Ali Khanlakhani Jan 2023

Microstructure And Mechanical Properties Of 0.2c-3.9al-1.12mn-0.3mo Δ-Trip Steel As A Function Of Isothermal Bainitic Transformation Temperature, Mahsa Gholambargani, Yahya Palizdar, Ali Khanlakhani, Ali Khanlakhani

Journal of Metals, Materials and Minerals

The present investigation employed a two-stage heat treatment on a δ-transformation-induced plasticity (TRIP) steel comprising 0.2C–4Al–1.2Mn–0.3Mo (wt%). The mechanical and microstructural characteristics that result from varied isothermal bainitic transformation (IBT) temperatures following inter-critical annealing at 820℃ for 10 min are thoroughly analyzed. The microstructure of the steels consisted of δ-ferrite, α-ferrite, bainitic ferrite, retained austenite (RA), and martensite, resulting in an optimum combination of the ultimate tensile strength (UTS) and total elongation (TE). The results of the investigation showed that IBT temperature had an effect on the stability of RA and the martensitic transition. Due to the increased mechanical stability …

Go to article

Synthesis And Modification Of Nickel Hydroxide Particle Synthesized By Self-Assembly And Electron Beam Irradiation Technique For Photocatalyst Activity, Narisara Saechin, Sumitra Sripho, Thitirat Rattanawongwiboon, Sakchai Laksee, Pattra Lertsarawut, Wilasinee Kingkam, Sarute Ummartyotin Jan 2023

Synthesis And Modification Of Nickel Hydroxide Particle Synthesized By Self-Assembly And Electron Beam Irradiation Technique For Photocatalyst Activity, Narisara Saechin, Sumitra Sripho, Thitirat Rattanawongwiboon, Sakchai Laksee, Pattra Lertsarawut, Wilasinee Kingkam, Sarute Ummartyotin

Journal of Metals, Materials and Minerals

The purpose of this work is to study the methyl orange removal of Ni(OH)2 nanoparticles. The photo-catalyst activity is investigated based on UV lamp of 18 watt. Ni(OH)2 is synthesized by a self-assembly process and then exposed to electron beam radiation at 10 MeV energy with various doses ranging from 50 kGy to 500 kGy. The properties of Ni(OH)2 nanoparticles are then evaluated. No significant change of functional group and percent of crystallinity are observed. The morphology is uniformly presented as a plate-like. The specific surface area, pore size and pore volume are reduced. Point of zero charge confirmed that …

Go to article

Improvement Of Specific Capacity Of Lithium Iron Phosphate Battery By Increasing The Surface Area And Electrical Conductivity Of Cathode Electrode Using Graphene Foam, Phurida Kokmat, Patiphat Matsayamat, Kunaree Wongrach, Piyaporn Surinlert, Akkawat Ruammaitree Jan 2023

Improvement Of Specific Capacity Of Lithium Iron Phosphate Battery By Increasing The Surface Area And Electrical Conductivity Of Cathode Electrode Using Graphene Foam, Phurida Kokmat, Patiphat Matsayamat, Kunaree Wongrach, Piyaporn Surinlert, Akkawat Ruammaitree

Journal of Metals, Materials and Minerals

Lithium iron phosphate (LFP) is widely used as an active material in a cathode electrode for lithium-ion batteries (LIBs). LFP has many remarkable properties such as high working voltage and excellent thermal stability. However, it suffers with slow ion diffusion and low electrical conductivity. Graphene foam has many outstanding properties such as large surface area and great electrical conductivity. These properties are suitable for improving the cathode electrode. In this work, the graphene foam was synthesized by chemical vapor deposition. The cathode electrode was prepared by dropping the LFP on the graphene foam. We found that the specific capacity of …

Go to article

Effect Of Calcination Frequency On The Thermoelectric Properties Of Ti Doped Cucro By Solid State Method, Doli Bonardo, Nono Darsono, Syahrul Humaidi, Agung Imaduddin, Noni Surtiana Silalahi Jan 2023

Effect Of Calcination Frequency On The Thermoelectric Properties Of Ti Doped Cucro By Solid State Method, Doli Bonardo, Nono Darsono, Syahrul Humaidi, Agung Imaduddin, Noni Surtiana Silalahi

Journal of Metals, Materials and Minerals

In this study, the influence of titanium oxide (TiO2) dopants and varying calcination processes on the thermoelectric properties of CuCrO2 was systematically explored. It was emphasized that these factors were not only affecting dislocation density but also exerting a profound influence on thermoelectric performance through the modulation of Seebeck coefficient and resistivity. The findings highlighted CrT-2, which incorporated TiO2 and underwent a two-time calcination process, as the top-performing sample in terms of power factor values, underscoring the significance of TiO2 as a dopant for enhancing thermoelectric efficiency. Conversely, Cr-4, exposed to four calcination cycles, exhibited slightly lower power factor values …

Go to article

Electrical And Water Resistance Properties Of Conductive Paste Based On Gold/Silver Composites, Sutthipoj Wongrerkdee, Supab Choopun, Pichitchai Pimpang Jan 2023

Electrical And Water Resistance Properties Of Conductive Paste Based On Gold/Silver Composites, Sutthipoj Wongrerkdee, Supab Choopun, Pichitchai Pimpang

Journal of Metals, Materials and Minerals

This study aimed to investigate the effects of a corrosive environment on both the electrical and the water resistance properties of conductive paste based on gold/silver composites. The conductive paste was prepared by incorporating silver and gold powders, polyvinyl acetate, polyvinyl chloride as adhesive components, and methyl isobutyl ketone as a diluent. The gold/silver composite powder was prepared with different mass ratios of gold and silver. The paste was coated on a substrate and heated at 80℃ to form the conductive paste film. Characterizations of conductive paste were performed by using FT-IR spectroscopy, electrometry, cyclic voltammetry, and contact angle measurements. …

Go to article

Molybdenum Disulfide-Zirconium Dioxide Composite With Enhance Supercapacitance Performance, Razan Nadhim Shaker, Sami Mohammed, Yousra Ali Abdulsayed Jan 2023

Molybdenum Disulfide-Zirconium Dioxide Composite With Enhance Supercapacitance Performance, Razan Nadhim Shaker, Sami Mohammed, Yousra Ali Abdulsayed

Journal of Metals, Materials and Minerals

As a supercapacitor active material, molybdenum disulfide (MoS2) layer offers good conductivity, large surface area, and electrochemical stability. In practice, however, its capacitance is low in comparison to other materials. This work synthesized MoS2-zirconium dioxide (ZrO2) composite in a simple, high-throughput way to test it as a supercapacitor active layer. During the tests, the composite shows a gravimetric capacitance of 500.0 F⸳g-1, while MoS2 and ZrO2 have capacitances of 265.12 and 152.43, respectively. The increase in capacitance of composite stems from the synergistic effect between ZrO2's pseudocapacitor behavior and MoS2's electric double layer capacitance (EDLC). Moreover, the composite has a …

Go to article

Synthesis Of Carbon Nanowalls By Oxy-Acetylene Torch Method, Bauyrzhan Zhumadilov, Aidar Kenzhegulov, Renata Nemkayeva, Gulmira Partizan, Yerassyl Yerlanuly, Maratbek Gadbullin Jan 2023

Synthesis Of Carbon Nanowalls By Oxy-Acetylene Torch Method, Bauyrzhan Zhumadilov, Aidar Kenzhegulov, Renata Nemkayeva, Gulmira Partizan, Yerassyl Yerlanuly, Maratbek Gadbullin

Journal of Metals, Materials and Minerals

This work presents a relatively new method for the synthesis of carbon nanowalls (CNWs) based on oxy-acetylene torch as a function of deposition time. The morphological and structural properties of the obtained CNW films were studied by scanning electron microscopy and Raman spectroscopy. Changes in the morphology and structural properties of the CNW films depending on the synthesis time were revealed. Shorter growth times lead to the formation of thinner CNW films with a dense labyrinth-like structure, while longer growth times lead to thicker CNW films with a petal-like structure. In addition, this study opens up the possibility of synthesizing …

Go to article

Sustainable Innovation In Ballistic Vest Design: Exploration Of Polyurethane-Coated Hemp Fabrics And Reinforced Sandwich Epoxy Composites Against 9 Mm And .40 S&W Bullets, Tannachart Wantang, Manop Pipathattakul, Fasai Wiwatwongwana Jan 2023

Sustainable Innovation In Ballistic Vest Design: Exploration Of Polyurethane-Coated Hemp Fabrics And Reinforced Sandwich Epoxy Composites Against 9 Mm And .40 S&W Bullets, Tannachart Wantang, Manop Pipathattakul, Fasai Wiwatwongwana

Journal of Metals, Materials and Minerals

This research aimed to evaluate the bulletproof capabilities of hemp fabrics and optimize the design factors for effective ballistic vests. Three main aspects were investigated: enhancing toughness with polyurethane-coated hemp fabrics, determining optimal placement of fabric-reinforced hemp epoxy composites in various configurations, and identifying the optimal number of fabric layers for performance against 9 mm and .40 S&W bullets. Penetration depth was measured in ballistic gelatin to analyze the results. The study showed strong statistical correlations between factor variables and penetration depth shifts. The most effective strategies included polyurethane-coated hemp on all layers and increased layering. The ammunition of 9 …

Go to article

Structural And Electrical Properties Of 0.98(Ko0.5na0.5onboo3)-0.02(Bio0.5nao0.5tioo3) Ceramics, Swayam Aryam Behera, Sugato Hajra, Swati Panda, Ali Amanat, P. G. R. Achary Jan 2023

Structural And Electrical Properties Of 0.98(Ko0.5na0.5onboo3)-0.02(Bio0.5nao0.5tioo3) Ceramics, Swayam Aryam Behera, Sugato Hajra, Swati Panda, Ali Amanat, P. G. R. Achary

Journal of Metals, Materials and Minerals

In the present communication, lead-free ceramics having composition 0.98(K0.5Na0.5NbO3)-0.02(Bi0.5Na0.5TiO3) were synthesized by a high-temperature solid-state reaction route. The Rietveld refinement for the 0.98KNN-0.02BNT reveals an MPB with phase fraction Amm2 (87.76 %) and Pm-3m (12.27%). The SEM study predicted a mean diameter of 0.98KNN-0.02BNT grains as 0.52µm±0.19. The 0.98KNN-0.02BNTceramic displayed a typical hysteresis loop with a remnant polarisation(Pr) of 7.0 μC/cm2, saturation polarization (Ps) of 16 μC/cm2, and a coercive field (Ec) of 26 kV/mm. The electrical, Raman spectra, dielectric, and hysteresis loop study supported a morphotropic phase boundary. The synthesized KNN-BNT lead-free material can be an excellent material for …

Go to article

To The Moon: Strategic Competition In The Cislunar Region, Shawn M. Willis Jan 2023

To The Moon: Strategic Competition In The Cislunar Region, Shawn M. Willis

Faculty Publications

China’s advancing space capabilities, particularly in the cislunar region, call for increased cislunar space domain awareness on the part of the United States. US military and civilian decisionmakers must take into account the full scope of China’s cislunar plans and capabilities as the military builds space strategies and future force designs. The United States must also increase near-term investments that support more robust cislunar space domain awareness.

Go to article

Evaluation Of Left Shoulder As Part-Time Travel Lane Design Alternatives And Transportation Management Center Staff Training Module Development, Zhuohang Deng, Zhiliang Luo, Neil Hockaday, Ahmed Farid, Anurag Pande Jan 2023

Evaluation Of Left Shoulder As Part-Time Travel Lane Design Alternatives And Transportation Management Center Staff Training Module Development, Zhuohang Deng, Zhiliang Luo, Neil Hockaday, Ahmed Farid, Anurag Pande

Mineta Transportation Institute

Permanent capacity expansion, such as adding new lanes, is no longer a viable strategy to address traffic congestion in California; hence, ITS (Intelligent Transportation System) strategies, such as part-time use of the shoulder as a travel lane, need to be explored. The use of the shoulder as a travel lane during peak traffic hours has limited applications in the US, and most use the right shoulder as a part-time travel lane even though either the right or left shoulder (but not both) may be used. Caltrans District 5 is exploring the use of Left Shoulder as a Part-time Travel Lane …

Go to article

Quantifying And Managing The Impact Of Electric Vehicles On Power Distribution Assets, Pravakar Pradhan Jan 2023

Quantifying And Managing The Impact Of Electric Vehicles On Power Distribution Assets, Pravakar Pradhan

Theses: Doctorates and Masters

Concern over the transportation sector’s greenhouse gas (GHG) emissions, which make up around 23% of all energy-related CO2 emissions, has grown in recent years. The widespread use of electric vehicles will be the primary strategy for tackling this issue. About 30% of the world’s passenger vehicle fleet is anticipated to be electrified by the year 2040. Moreover, the existing power distribution assets are already operating near their nominal capacities, and most of them have been in service for more than 25 years. Replacement of these assets will be very costly and disruptive to the power distribution network. Ergo, the main …

Go to article

Carbon Geosequestration And Enhanced Oil Recovery In Geological Formations: Multi-Scale Analysis, Auby Baban Jan 2023

Carbon Geosequestration And Enhanced Oil Recovery In Geological Formations: Multi-Scale Analysis, Auby Baban

Theses: Doctorates and Masters

Carbon geosequestration (CGS) has been recognized as a strategic solution to prevent/counter the catastrophic consequences of climate change. However, despite recent cutting-edge technical research, predicting quantitative CO2 trapping in geological formations via capillary trapping is currently scarce. Moreover, several aspects of multiphase flow characteristics of CO2/brine/rock systems, that greatly impact carbon capture and containment security, require further investigations. Furthermore, combining carbon geosequestration with Enhanced Oil Recovery (EOR) is an efficient and economically attractive technology to reduce global warming caused by emissions of anthropologic CO2 from the combustion of fossil fuels, whereby it offsets some of the costs of CO2 extraction. …

Go to article

Size Distribution, Elemental Composition And Morphology Of Nanoparticles Separated From Respirable Coal Mine Dust, Shoeleh Assemi, Lei Pan, Xuming Wang, Titilayo Akinseye, Jan D. Miller Jan 2023

Size Distribution, Elemental Composition And Morphology Of Nanoparticles Separated From Respirable Coal Mine Dust, Shoeleh Assemi, Lei Pan, Xuming Wang, Titilayo Akinseye, Jan D. Miller

Michigan Tech Publications, Part 1

Nanoparticles, defined as particles with one dimension below 100 nm, contribute little to the total mass concentration in respirable coal mine dust (RCMD) toxicological studies, but they could have a considerable part in the adverse health effects by RCMD inhalation. It has been shown that inhaled nanoparticles can penetrate deep into the lung and could plausibly contribute to acute and chronic pulmonary diseases by triggering oxidative stress formation and inducing inflammation. RCMD nanoparticles from samples collected in an underground mine in the United States were analyzed by a particle separation technique, field-flow fractionation (FFF), for size, morphology, and elemental composition. …

Go to article

On Evaluation Of The Indian Standard Topography Factor For Design Wind Speed On Escarpments, Abdul Haseeb Wani, Rajendra Kumar Varma, Ashok Kumar Ahuja Jan 2023

On Evaluation Of The Indian Standard Topography Factor For Design Wind Speed On Escarpments, Abdul Haseeb Wani, Rajendra Kumar Varma, Ashok Kumar Ahuja

ASEAN Journal on Science and Technology for Development

Standards on wind loads of various countries give wind loading map of respective country in which basic wind speeds are mentioned. Design wind speeds for designing buildings and other structures are evaluated by the structural designers from these basic wind speed values by incorporating many factors. One of these factors taken into consideration is for the local topography effect such as escarpments and hills. Standards on wind loads including Indian Standard give certain recommendations for the same. However, the steps involved in evaluating relevant modification factor for local topography as given in Indian Standard on Wind Loads are many. An …

Go to article

Liquid Waste Treatment For Sustainable Tapioca Industry: A Comparison Between Biogas And Liquid Sugar, Lilik Sulistyowati, Novi Andareswari, Rifqi Rahmat Hidayatullah, Nurul Amri Komarudin, Yuni Yolanda Jan 2023

Liquid Waste Treatment For Sustainable Tapioca Industry: A Comparison Between Biogas And Liquid Sugar, Lilik Sulistyowati, Novi Andareswari, Rifqi Rahmat Hidayatullah, Nurul Amri Komarudin, Yuni Yolanda

ASEAN Journal on Science and Technology for Development

There have been many studies examining the processing of tapioca wastewater. However, most studies have only researched at a laboratory scale without considering whether the treatment is appropriate. The study's purpose is to compare the processing technology of biogas and liquid sugar using technical, environmental, social, and cost-benefit analysis criteria to determine the appropriate technology to be applied. Literature study, observation, and interviews were used to determine the characteristics of each criterion. Cost-benefit analysis is calculated using the R/C Ratio. Furthermore, priority determination is carried out using the Exponential Comparison Method (MPE) using assessments from environmental and industrial experts on …

Go to article

Disintegration Evaluation Of Mudrock Fragment Through Wet-Dry Cycle By Quantitative Indices, Misbahudin Misbahudin, Dian Yesy Fatimah, Elfarino Trizani Jan 2023

Disintegration Evaluation Of Mudrock Fragment Through Wet-Dry Cycle By Quantitative Indices, Misbahudin Misbahudin, Dian Yesy Fatimah, Elfarino Trizani

ASEAN Journal on Science and Technology for Development

The disintegration of mudrock during moisture content change caused severe cases in several engineering works in Indonesia. One interesting site is Hambalang, Bogor Regency, West Java Province. The wetting and drying cycle is the easiest and fastest test to evaluate disintegration. After undergoing the process, samples of mudrocks disintegrate into smaller fragments. This paper evaluated the characteristics of the slaked material of mudrock by quantitative indices. The mudrock evaluated in this study underwent rapid disintegration in a short period, indicated by megascopic description and quantitative indices. In addition, evolutionary disintegration up to eight cycles has the same characteristics as the …

Go to article

A Diversity-Enhanced Memetic Algorithm For Solving Electric Vehicle Routing Problems With Time Windows And Mixed Backhauls, Jianhua Xiao, Jingguo Du, Zhiguang Cao, Xingyi Zhang, Yunyun Niu Jan 2023

A Diversity-Enhanced Memetic Algorithm For Solving Electric Vehicle Routing Problems With Time Windows And Mixed Backhauls, Jianhua Xiao, Jingguo Du, Zhiguang Cao, Xingyi Zhang, Yunyun Niu

Research Collection School Of Computing and Information Systems

The electric vehicle routing problem (EVRP) has been studied increasingly because of environmental concerns. However, existing studies on the EVRP mainly focus on time windows and sole linehaul customers, which might not be practical as backhaul customers are also ubiquitous in reality. In this study, we investigate an EVRP with time windows and mixed backhauls (EVRPTWMB), where both linehaul and backhaul customers exist and can be served in any order. To address this challenging problem, we propose a diversity-enhanced memetic algorithm (DEMA) that integrates three types of novel operators, including genetic operators based on adaptive selection mechanism, a selection operator …

Go to article

First Prev