Engineering Commons^™

Adaptation Algorithm For Self-Tuning Of Parameters Of Models Of Multi-Stage Flotation Processes, Nilufar Sharifzhanova, Maksadhan Yakubov, Francesco Gregoretti

Technical science and innovation

Modern methods for solving problems of planning the execution of batches of tasks in multi-stage systems are characterized by the presence of restrictions on their dimensionality, the impossibility of guaranteed obtaining better results in comparison with fixed packages for different values of the input parameters of the problem. In the article, the author solved the problem of optimizing the composition of job packages running in multi-stage systems using the branch and bound method. Research has been carried out on various ways to form package execution orders tasks in multi-stage systems (heuristic rules for ordering packages tasks in the sequence of …

Economy Of Scale Of Energy Intensity In Aquifer Storage And Recovery (Asr), Alyson Haley Rapp

Theses and Dissertations

More water utilities are adopting Aquifer Storage and Recovery (ASR) to balance long-term water supply and demand. Due to large implementation and operation costs, ASR projects need to be optimized, particularly for energy use, which is a major operating expense. This study examines the relationships among energy use, recharge, and recovery at two ASR projects in the western United States. The major finding is an economy of scale for recovery processes, but not for gravity-fed recharge processes. The economy of scale found is as follows: the energy intensity recovered decreases with volume. This suggests it is more energy-efficient to recover …

Imerys: Tube Mill Optimization Project, Ryan Waltman, Dalton Beasley, Dyson Beasley, Tristan Mcmichael

Senior Design Project For Engineers

The Tube Mill Optimization Project is in partnership with Imerys for Tube Mill 81 at their Marble Hill site in Georgia. Tube Mill 81 is a dry ball mill that operates 24/7 and makes an intermediary product for Plant 3. Tube Mill 81 needs quality improvement and a production rate increase to meet demand. Imerys’s quality specification is between a particle size of 12-18 microns and an acceptable production rate of 5 tons per hour. This project focuses on the development and implementation of three solutions: increase the amps on the separator to increase production, replace missing classifier blades in …

Optimization Of Hydraulic Cylinder Positioning For Wind Tower Hydraulic Erection System, Anbesh Rawal

Master's Theses

Wind produced electricity is a rapidly growing field with wind towers serving as critical components. Conventionally, special cranes are commonly used for wind tower erection. This study explores the use of hydraulic cylinders for small-scale wind tower erection. The thesis aims to find the optimal position of hydraulic cylinder connections in a hydraulic erection system for safe and energy-efficient tower erection and retraction and to enhance the performance and longevity of the system.

Structural analysis was conducted to investigate various hydraulic cylinder positioning configurations, ensuring minimal force exertion while maintaining structural integrity. The study included the selection of locally available …

Utilization Of Integer Programming For Scheduling Maintenance At Nuclear Power Plants, Timothy Gallacher

Doctoral Dissertations

This thesis develops a thought that naturally explores three specific motifs for solving the complexities of scheduling maintenance at Nuclear Power Plants (NPP). The first chapter of this paper will develop the initial thought around creating a schedule for a given work week, including all the various constraints inherent to this problem. Such constraints include but are not limited to personnel availability, allowable component out-of-service time, and the Plant Risk Assessment. The objective function being to minimize the total cost of worker’s compensation for that given week.

The second chapter addresses the question of whether this simple schedule can be …

Deep Reinforcement Learning For The Design Of Structural Topologies, Nathan Brown

All Dissertations

Advances in machine learning algorithms and increased computational efficiencies have given engineers new capabilities and tools for engineering design. The presented work investigates using deep reinforcement learning (DRL), a subset of deep machine learning that teaches an agent to complete a task through accumulating experiences in an interactive environment, to design 2D structural topologies. Three unique structural topology design problems are investigated to validate DRL as a practical design automation tool to produce high-performing designs in structural topology domains.

The first design problem attempts to find a gradient-free alternative to solving the compliance minimization topology optimization problem. In the proposed …

Cost Minimizing Energy Management Control Scheme For Microgrids Considering Dynamic Electricity Prices, Levi T. Miller

All Graduate Theses and Dissertations, Fall 2023 to Present

As countries develop and technology improves, the world is using more energy than ever before. This fact along with several other political, social, and economic factors has resulted in simultaneous energy and climate crises. A partial solution to both problems is bringing clean energy sources of electricity closer to the customers who use that energy. A microgrid is a smaller version of the national electric grid where smaller electricity generators are networked with local consumers and controlled independently of the main grid. Because control of electricity sources and loads are transferred to local controllers, the flexibility with which they can …

Parametric Optimization Of A Wing-Fuselage System Using A Vorticity-Based Panel Solver, Chino Cruz

Master's Theses

Aerodynamic topology optimization is a useful tool in the aerodynamic design pro-
cess, especially when looking for marginal gains within a design. One example is
a turboprop racer concept aircraft that is designed with the goal of breaking world
speed records. An optimization framework was developed with the intention of later
being applied to this design. In the early design stages, the optimization framework
must focus on quicker methods of drag estimation, such as a panel codes. The large
number of design variables in topology optimization can exponentially increase func-
tion evaluations and thus computational cost. A vorticity-based panel solver …

Extremum Seeking Control Algorithms For Extremely High Frequency Antenna System Pointing, Scott Shore

Mechanical Engineering ETDs

The research examines the application of extremum seeking control (ESC) algorithms to ground station antenna pointing for extremely high frequency (EHF) communication systems. ESC algorithms search for local maxima or minima by locating where an objective function gradient goes to zero. With wireless communication expanding into higher frequencies, the ground station pointing requirement is increasing. ESC presents a method which utilizes available equipment and information to perform ground station pointing. Additionally, ESC algorithms do not rely on assumptions or approximations needed for other techniques. The dissertation demonstrates ESC algorithm feasibility for the ground station pointing problem, benchmarks the ESC algorithms …

Surrogate-Assisted Simulation-Optimization Framework For Groundwater Management In A Multi-Aquifer System, Melika Mani

LSU Master's Theses

Uncontrolled groundwater exploitation can lead to aquifer depletion, land subsidence, and saltwater intrusion. Effective groundwater management is challenging due to the intricate nature of subsurface hydrogeology and spatiotemporally variable pumping, especially in a multi-aquifer system. To ensure sustainable withdrawal, multi-objective optimization is an effective tool for balancing management goals and drawdown effects. However, running simulation-optimization using detailed groundwater models is computationally expensive, pushing decision-makers to decide based on limited scenarios. In this study, a hydrogeological framework was constructed for the Capital Area, Louisiana, allowing for individual assessment of each unit to better understand each aquifer's condition. Moreover, a surrogate-assisted simulation-optimization …

Resource Allocation In Subsidy Welfare Programs: Managerial Insights For Nonprofits, Governments, And Service Providers, Wei Wei

Doctoral Dissertations

Subsidy welfare programs provide financial assistance to economically disadvantaged individuals and families to access essential and life-altering services (e.g., education, child care, and housing) that they might not otherwise have access to. Access to these services is considered critical to achieving a better and more sustainable future for all. As such, these high-quality services are directly related to several United Nations Sustainable Development Goals, which were adopted as a universal call to action to end poverty, save the planet and improve the lives and prospects of everyone, everywhere." In particular, the need for these affordable and high-quality services has been …

Reduced Bias User Preference Methods For Determining The Pareto-Optimal Solution Point, Dylan Thomas Johnson

Master's Theses (2009 -)

Engineering design is filled with tradeoffs between competing objectives such as performance, mass, cost, and schedule. A designer must navigate these complex multi-objective problems and deliver the right solution for their application. Multi-objective optimization techniques are powerful and widely used; however, a key drawback to these techniques is that they often output a set of equivalent solutions called the Pareto Front. The designer must perform an additional multi-objective down selection on the Pareto Front to determine a single Pareto-optimal solution point for their design. Existing Pareto Front processing techniques either use traditional infinitely adjustable weights, which can yield results that …

Developing A Smart And Sustainable Public Transportation System: A Case Study In Camden, New Jersey, Zahra Vafakhah

Theses and Dissertations

The transportation sector is a major contributor to air pollution and Greenhouse Gas (GHG) emissions. As a significant source of emissions, public transportation presents an opportunity for mitigation through electrification. However, transitioning to an electric bus fleet necessitates substantial investments in bus procurement and charging infrastructure. To address the associated costs, this study introduces a mixed-integer linear mathematical model developed to optimize the location of on-route fast charging stations within bus networks. The central objective of this optimization formulation is to minimize the overall cost of establishing the charging infrastructure. The study employs a real-world case study focusing on a …

Optimization Of Removal Of Toluene From Industrial Wastewater Using Rsm Box– Behnken Experimental Design, Dariush Jafari, Morteza Esfandyari, Mehdi Mojahed

Department of Civil and Environmental Engineering: Faculty Publications

The study is concerned with the adsorption of toluene from real wastewater using granular beads of activated carbon. The adsorbent was analyzed before and after the process using Scanning Electron Microscope analysis to characterize its surface characteristics. The adsorption parameters including solution pH, contact time, dosage of adsorbent, temperature and toluene initial concentration were optimized using response surface methodology (RSM) Box-Behnken experimental design to maximize the toluene adsorption. The adsorption capacity of the adsorbent was 298 mg g⁻¹ and the maximum toluene removal was 99.5% which was achieved in the following optimal conditions: pH: 2, 100 min, adsorbent dosage: …

Optimization Of Removal Of Toluene From Industrial Wastewater Using Rsm Box– Behnken Experimental Design, Dariush Jafari, Morteza Esfandyari, Mehdi Mojahed

Department of Civil and Environmental Engineering: Faculty Publications

The study is concerned with the adsorption of toluene from real wastewater using granular beads of activated carbon. The adsorbent was analyzed before and after the process using Scanning Electron Microscope analysis to characterize its surface characteristics. The adsorption parameters including solution pH, contact time, dosage of adsorbent, temperature and toluene initial concentration were optimized using response surface methodology (RSM) Box-Behnken experimental design to maximize the toluene adsorption. The adsorption capacity of the adsorbent was 298 mg g^{− 1} and the maximum toluene removal was 99.5% which was achieved in the following optimal conditions: pH: 2, 100 min, adsorbent …

Application Of Evolutionary Algorithms For Optimization Of Operation Modes Of Regional Electric Power Systems, Isamiddin Khakimovich Siddikov, Oksana Vitalevna Porubay

Chemical Technology, Control and Management

The paper presents the possibilities of using evolutionary algorithms to solve the problem of optimizing the operation modes of electric power facilities in the presence of constraints in the form of inequalities and equalities. The limits of constraints have a variable character, depending on the generated and consumed energy. Existing methods used for the optimization of modes are based on general principles and approaches to optimization, which usually adapt to the specifics of the problem. In electric power facilities, optimization problems have some peculiarities, among which is the presence of multiple constraints applied to both independent and dependent variables. Many …

Optimization Of A Bioreactor, Ali Alshami

AI Assignment Library

The primary objective of this assignimentis to learn to work effectively as a team, and to design an experiment where optimization is essential.

Transforming Large-Scale Virtualized Networks: Advancements In Latency Reduction, Availability Enhancement, And Security Fortification, Ibrahim Tamim

Electronic Thesis and Dissertation Repository

In today’s digital age, the increasing demand for networks, driven by the proliferation of connected devices, data-intensive applications, and transformative technologies, necessitates robust and efficient network infrastructure. This thesis addresses the challenges posed by virtualization in 5G networking and focuses on enhancing next-generation Radio Access Networks (RANs), particularly Open-RAN (O-RAN). The objective is to transform virtualized networks into highly reliable, secure, and latency-aware systems. To achieve this, the thesis proposes novel strategies for virtual function placement, traffic steering, and virtual function security within O-RAN. These solutions utilize optimization techniques such as binary integer programming, mixed integer binary programming, column generation, …

Improving Mobility And Safety In Traditional And Intelligent Transportation Systems Using Computational And Mathematical Modeling, Shahrbanoo Rezaei

Doctoral Dissertations

In traditional transportation systems, park-and-ride (P&R) facilities have been introduced to mitigate the congestion problems and improve mobility. This study in the second chapter, develops a framework that integrates a demand model and an optimization model to study the optimal placement of P&R facilities. The results suggest that the optimal placement of P&R facilities has the potential to improve network performance, and reduce emission and vehicle kilometer traveled. In intelligent transportation systems, autonomous vehicles are expected to bring smart mobility to transportation systems, reduce traffic congestion, and improve safety of drivers and passengers by eliminating human errors. The safe operation …

Modeling And Solution Methodologies For Mixed-Model Sequencing In Automobile Industry, Ibrahim Ozan Yilmazlar

All Dissertations

The global competitive environment leads companies to consider how to produce high-quality products at a lower cost. Mixed-model assembly lines are often designed such that average station work satisfies the time allocated to each station, but some models with work-intensive options require more than the allocated time. Sequencing varying models in a mixed-model assembly line, mixed-model sequencing (MMS), is a short-term decision problem that has the objective of preventing line stoppage resulting from a station work overload. Accordingly, a good allocation of models is necessary to avoid work overload. The car sequencing problem (CSP) is a specific version of the …

Optimizing High-Performance Computing Design: The Impacts Of Bandwidth And Topology Across Workloads For Distributed Shared Memory Systems, Jonathan A. Milton

Electrical and Computer Engineering ETDs

With the complexity of high-performance computing designs continuously increasing, the importance of evaluating with simulation also grows. One of the key design aspects is the network architecture; topology and bandwidth greatly influence the overall performance and should be optimized. This work uses simulations written to run in the Structural Simulation Toolkit software framework to evaluate a variety of architecture configurations, identify the optimal design point based on expected workload, and evaluate the changes with increased scale. The results show that advanced topologies outperform legacy architectures justifying the additional design complexity; and that after a certain point increasing the bandwidth provides …

Genetic Algorithm Theory In Simulation Programs As A Tool For Improving The Environmental Performance Of Office Buildings, Somaia Mohamed Arafa, Esraa Mohamed Elazab, Nanees Abd Elhamid Elsayyad

Mansoura Engineering Journal

Globally, a large proportion of a building's energy is consumed to achieve thermal comfort, as promoting energy efficiency and environmental sustainability of buildings is an important global goal. Therefore, the new building regulations are geared explicitly toward energy-saving projects. However, there are usually many competitive priorities, such as maximizing energy use in office buildings, leading to the complex multi-objective optimization topic. The main objective of this research was to reduce the energy consumed for cooling load in the office buildings in the city of Cairo, which is located in a hot desert climate. This was achieved by optimizing ten different …

A Systems Approach To Design And Plan Sustainable Antifragile Infrastructure Based On Aggregate Footprint And Satisfaction, Farboud Khatami

Theses and Dissertations

The concepts of robustness and sustainability in planning and design of water and energy infrastructures have been extensively explored in previous research, primarily focusing on system reliability, environmental considerations, and economic aspects. This study aims to broaden the understanding of these concepts by offering comprehensive frameworks that capture the essence of robustness and sustainability at two distinct levels.

The first level of investigation focuses on the performance of infrastructure networks during natural disasters. Traditionally, this has been addressed using reliability, resilience, and vulnerability metrics. However, these methods rely on static, deterministic, and non-stationary data, which is inadequate when dealing with …

Design And Development Of Ultrabroadband, High-Gain, And High-Isolation Thz Mimo Antenna With A Complementary Split-Ring Resonator Metamaterial, Ammar Armghan, Khaled Aliqab, Meshari Alsharari, Osamah Alsalman, Juveriya Parmar, Shobhit K. Patel

Department of Mechanical and Materials Engineering: Faculty Publications

The need for high-speed communication has created a way to design THz antennas that operate at high frequencies, speeds, and data rates. In this manuscript, a THz MIMO antenna is designed using a metamaterial. The two-port antenna design proposed uses a complementary splitring resonator patch. The design results are also compared with a simple patch antenna to show the improvement. The design shows a better isolation of 50 dB. A broadband width of 8.3 THz is achieved using this complementary split-ring resonator design. The percentage bandwidth is 90%, showing an ultrabroadband response. The highest gain of 10.34 dB is achieved …

Optimization Of Cargo Handling Equipment At The Airport, David Šourek

International Material Handling Research Colloquium

No abstract provided.

Working Together — Scheduling Operations In Assisted Order Picking, Jelmer Pier Van Der Gaast

International Material Handling Research Colloquium

No abstract provided.

Design Of Puzzle-Based Storage Systems With Unidimensional Cells, Hector J. Carlo, Andres Blanco

International Material Handling Research Colloquium

No abstract provided.

Performance Modeling And Optimization For A Fog-Based Iot Platform, Shensheng Tang

Electrical and Computer Engineering Faculty Publications

A fog-based IoT platform model involving three layers, i.e., IoT devices, fog nodes, and the cloud, was proposed using an open Jackson network with feedback. The system performance was analyzed for individual subsystems, and the overall system was based on different input parameters. Interesting performance metrics were derived from analytical results. A resource optimization problem was developed and solved to determine the optimal service rates at individual fog nodes under some constraint conditions. Numerical evaluations for the performance and the optimization problem are provided for further understanding of the analysis. The modeling and analysis, as well as the optimization design …

Novel Approach For Non-Invasive Prediction Of Body Shape And Habitus, Emma Young

Electronic Theses and Dissertations

While marker-based motion capture remains the gold standard in measuring human movement, accuracy is influenced by soft-tissue artifacts, particularly for subjects with high body mass index (BMI) where markers are not placed close to the underlying bone. Obesity influences joint loads and motion patterns, and BMI may not be sufficient to capture the distribution of a subject’s weight or to differentiate differences between subjects. Subjects in need of a joint replacement are more likely to have mobility issues or pain, which prevents exercise. Obesity also increases the likelihood of needing a total joint replacement. Accurate movement data for subjects with …

Distributed Control Of Servicing Satellite Fleet Using Horizon Simulation Framework, Scott Plantenga

Master's Theses

On-orbit satellite servicing is critical to maximizing space utilization and sustainability and is of growing interest for commercial, civil, and defense applications. Reliance on astronauts or anchored robotic arms for the servicing of next-generation large, complex space structures operating beyond Low Earth Orbit is impractical. Substantial literature has investigated the mission design and analysis of robotic servicing missions that utilize a single servicing satellite to approach and service a single target satellite. This motivates the present research to investigate a fleet of servicing satellites performing several operations for a large, central space structure.

This research leverages a distributed control approach, …