Engineering Commons^™

Finite Element Modeling And Analysis Of Perforated Steel Members Under Blast Loading, Mahmoud T. Nawar, Ayman El-Zohairy, Ibrahim T. Arafa

Faculty Publications

Perforated steel members (PSMs) are now frequently used in building construction due to their beneficial features, including their proven blast-resistance abilities. To safeguard against structural failures from explosions and terrorist threats, perforated steel beams (PSBs) and perforated steel columns (PSCs) offer a viable alternative to traditional steel members. This is attributed to their impressive energy absorption potential, a result of their combined high strength and ductile behavior. In this study, numerical examinations of damage assessment under the combined effects of gravity and blast loads are carried out to mimic real-world scenarios of external explosions close to steel structures. The damage …

2nd Annual Girls Build Summer Academy: Logistics And Scheduling, Matteo Cade Cuccaro

Construction Management

This paper discusses the logistics and scheduling involved for Cal Poly construction management department’s second annual Girls Build Summer Academy. The week-long academy was hosted to introduce construction related activities to 19 high school-aged girls so they could learn more about the careers available within the architecture, engineering, and construction industry, while learning skills to build individual and team projects. To achieve this goal, a full schedule was developed for each day of the camp, allowing for a variety of activities, including listening to guest speakers, completing building projects, and training to safely use tools. There were many challenges that …

2nd Annual Girls Build Summer Academy: Apprentice Ii Service Project, Angeline Witt

Construction Management

Cal Poly’s construction management department hosted the second annual Girls Build Summer Academy in July 2023. This paper highlights the service work project that the three returning academy participants completed during the week-long day camp. The academy’s goal was to provide high school-aged girls the opportunity to learn about the various career paths in the construction industry while emphasizing skilled trade opportunities including concrete, framing, drywall, electrical, and equipment operators. The girls worked to enrich their construction knowledge and grow their skills with hands-on building activities. By the end of the week, each girl had gained the skills and confidence …

Vegetation And Its Effectiveness In Replacing Traditional Cooling Systems, Bryce Isaiah Trump

Construction Management

This project aimed to analyze if vegetation is effective in replacing traditional cooling systems, when utilized as green roofs and walls. It serves to provide information to the construction industry, designers, architects, and homeowners. Information gathered through a field experiment will be used to give quantitative data on if vegetation is effective and practical in replacing traditional cooling systems in buildings and homes. The basis for the idea of this project stems from two main courses in the Construction Management program, those courses being Principles of Environmental Design, and Sustainability and the Built Environment. The stated courses introduce the idea …

San Luis Obispo Railroad Museum Accessibility Ramp, Noah Atticus Callahan

Construction Management

The San Luis Obispo’s Railroad Museum is a local organization that aims to preserve the history of the Southern Pacific Railroad and educate the community. The mission of this organization is to collect and display various historic artifacts for the public to see. This project serves to aid in the development of a 1923 boxcar into a future exhibit for the museum by creating a ramp that bridges the platform of the station to the boxcar. The ramp was constructed out of pressure treated lumber, angle iron to bind the lumber together, and hinges to allow it to fold. Both …

Paso Robles Police Department Shooting Range Stairs, Emily Ann Andres

Construction Management

The Paso Robles Police Department has a shooting range located just outside the Paso Robles Airport. The range is a newer facility that is used for training by the Paso Robles Police, as well as departments from surrounding cities. The flagpole for the range, located at the top of the hill, was inaccessible due to the brush overgrowth, gopher holes, and uneven terrain. Thus, the department needed a new staircase to improve accessibility to the flagpole so the red flag can be flown while the shooting range is in use. With many neighboring facilities, such as the remote-control plane club, …

Highlighting The Key Differences In Project Management When Using Mass Timber: Case Study, Kevin Krueger

Construction Management

Mass Timber or Cross Laminated Timber (CLT) is structurally engineered wood designed to be used as the structural components of a building. As the Construction Industry shifts toward using more renewable materials, mass timber becomes more relevant. This paper presents a comprehensive case study focusing on the construction process innovations implemented in a recent mass timber project located in San Francisco. The project involves the construction of a secure facility for a prominent biotechnology company. This research aims to learn the innovative techniques and strategies that contributed to the successful completion of this unique project. Key stakeholders, including the project …

Artificial Intelligence Integration In Construction: A Cal Poly Curriculum Assessment, Carter James Hahn

Construction Management

In a rapidly evolving industry where AI enhances efficiency and safety, questions are being raised on whether it should be introduced in the classroom. This research project is with the intention of understanding if and how artificial intelligence should be incorporated into Cal Poly’s construction management curriculum. The research combines a literature review establishing AI's relevance in construction project management with a survey-based methodology to gauge industry perspectives. Today, the global construction market witnesses a surge in AI adoption in its planning, construction, and O&M phases. In turn, the industry has benefited from its application in mitigation of risks, improved …

Operation Webs – Tiny Home On Wheels Preconstruction Package, Jake L. Torres

Construction Management

Operation WEBS (Women Empowered Build Strong) Tiny Home on Wheels Preconstruction Package is an interdisciplinary project based senior project completed by California Polytechnic State University, San Luis Obispo, College of Architecture and Environmental Design students Jake Torres and Brendan Moynahan. With the help of Hunter Smith Architecture, Wethington Engineering Inc, electrician Lloyd Taylor, and plumber Paolo Sena we completed deliverables for designing and planning the construction of a tiny home on wheels with the goal of providing a displaced women veteran a sustainable housing solution through owner Sandy Blair’s nonprofit Operation WEBS. Our team intended to design and build a …

The Impact Of Language And Culture On Productivity: A Recommendation To Implement An Innovative Spanish Language Track, Jordan J. Price

Construction Management

Productivity is a popular focus of construction research because of its efforts to overcome a multitude of project related challenges. This research explores the intersection of language barriers, cultural differences, and productivity in the construction industry with a focus on the impact of bilingual management. It evaluates the impact of these factors on productivity and its beneficial relationship to multilingual management on diverse construction crews. The impending retirement of 40% of the construction labor force calls for proactive initiatives to manage the demographic shift shown by the growing composition of Hispanics in the workforce. The influence of language barriers on …

Comparative Analysis Of Laser Scanning Technologies For Cal Poly Construction Management Department, Evan A. Sell

Construction Management

This paper aims to assist the Cal Poly Construction Management program in selecting the most suitable 3D scanning solution based on their specific needs, cost-effectiveness, and desired outcomes for campus digitization. Four different 3D scanning technologies will be evaluated based on application, cost, ease of use, and technical specifications that meet the desired Cal Poly Construction Management criteria. Information was gathered through meetings, email correspondence, and website technical information. Many factors were considered in this analysis to generate a recommendation; however, the most important criteria factor was educational value, and specifications that matched the Cal Poly goal of creating a …

United States Army Corps Of Engineers Info Session At California Polytechnic State University San Luis Obispo, Gabriel L. Vesneski

Construction Management

Gabriel Vesneski facilitated an Info Session on Thursday, November 2, at California Polytechnic State University, San Luis Obispo for the United States Army Corps of Engineers Sacramento District Civil Works. Three guest speakers from the Sacramento District Civil Works office presented their educational background, experience as employees for the Corps of Engineers, occupational benefits, and finally opened a question-and-answer forum for the students attending the Info Session. Upon completion of the Info Session, a survey was provided for attendees, in order to track interest in employment or internship opportunities provided by the United States Army Corps of Engineers. Finally, there …

Compressive And Flexural Tensile Strength Impacts Of Aluminum Shavings In Concrete, Ian Smith

Construction Management

Concrete is one of the most utilized construction materials around the world, but new and cutting-edge methods are constantly pushing the envelope for concrete’s applications and feasibility as a construction material. Unfortunately, concrete has a general lack of resistance to bending and stretching. Studies have shown several successful attempts to enhance the mechanical properties of concrete through implementation of various admixtures and methods. Steel is widely considered the primary material capable of reinforcing concrete. This paper evaluates concrete’s change in strength of flexural tension and compression as a result of implementing aluminum as a reinforcing agent. To determine the full …

Transitions Metal Health Association Youth Treatment Program Facility Upgrades, Nicolas Fregulia

Construction Management

The Transitions Mental Health Association (TMHA) Youth Treatment Program in San Luis Obispo is a vital resource dedicated to supporting the mental health and well-being of young individuals in the community. TMHA recently purchased a new property that requires several updates before opening. Three California Polytechnic State University Construction Management students collaborated an estimate, schedule, design and construction of a parking lot, walking path, and a new tortoise enclosure. The team split up the roles evenly into two phases preconstruction and construction, where preconstruction includes estimate, schedule, design, and logistics. The purpose of this is to review phase one of …

Effects Of Simultaneous Co2 Addition To The Fuel And Oxidizer Streams On Soot Formation In Co-Flow Diffusion Ethylene Flame, Yu Yang, Shu Zheng, Yuzhen He, Hao Liu, Ran Sui, Qiang Lu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Soot formation in a co-flow diffusion ethylene flame with the addition of CO₂ to the fuel (the CO₂-F), oxidizer (the CO₂-O), and fuel/oxidizer (the CO₂-F/O) streams was numerically and experimentally investigated in this study. The effects of different CO₂ addition ways on soot inception, soot condensation, H-abstraction-C₂H₂-addition (HACA) and oxidation by O₂/OH processes, were quantitatively analyzed by introducing the integrated reaction rates over the whole computational domain. The simulated and experimental results showed that the CO₂-F/O was the most effective in inhibiting soot formation …

Quantifying Impacts Of Climate Change On Headwater Streamflow Regime In Robinson Forest: Insights From 35-Years Of Data Collection., Lauren Brown

Electronic Theses and Dissertations

Climate change may shift patterns of streamflow permanence in headwater systems by altering the frequency, magnitude, duration, timing, and rate of change of surface streamflow, impacting both local ecosystems as well as regional water budgets and availability. While much uncertainty surrounds modeling-based methods to quantify the impacts of climate change on water budgets, long-term hydrologic data collected from headwaters in experimental research forests serve as critical evidence to reduce such uncertainty. The objective of this study is to quantify shifts in frequency, magnitude, duration, timing, and rate of change of streamflow in two headwater catchments with relatively little recent disturbance …

Improving And Integrating Quantitative Single Cell Spatial Biology For Theranostic Medicine, Peng Lu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Disease states are the result of a complex interplay of many different cell types interacting in close proximity in the context of often heterogeneous tissues. Alpha particles are drawing intense research and clinical interest because of their potent cytotoxic effects and their short path lengths. Analyzing the dose distribution and tissue micro-environment for alpha therapy plays a key role in predicting the efficacy of this targeted radiotherapy. However, to date there have been no direct on-tissue analytical methods for alpha dose distributions and the corresponding tissue microenvironments.

Therefore, we have developed a pipeline to overcome this limitation by utilizing quantitative …

Upcyclying Of Polyethylene Terephtalate By Addition Of Thermoplastic Elastomer, Diego Francisco Bermudez

Open Access Theses & Dissertations

Continual overconsumption of single-use plastics has generated challenges of solid waste management across the United States. Common plastic waste management solutions, such as landfill, have caused the migration of contaminants into the environment consequently affecting not only the health of wildlife, but also that of human beings. Alternative strategies for the handling of single-use plastic such as polyethylene terephthalate (PET), used in the food packaging industry, can ultimately help mitigate the noxious consequences of single-use plastics affecting entire ecosystems. This study demonstrates a potential avenue of materials upcycling by studying the effects of coupling PET with the thermoplastic elastomer styrene-ethylene-butylene-styrene …

Design And Customization Of 3d Printers For Advanced Materials Printing, Alan Omar Loera Martinez

Open Access Theses & Dissertations

This research is divided into two sections. The first section discusses modificationsperformed to two commercial printers. The first printer was modified from a thermoplastic polymer printer to a pneumatic printer by taking away its heating elements and print head. Circuits were directed to pneumatic dispensing system as well in order to automate the process. The second printer had mechanical modifications performed to be a multi-material gradient printer by controlling two stepper motors through an electronics board. Through code, a mixing ratio changed the motors' rotations to provide the desired gradient of two different materials. The second section of the present …

Design Of A Low-Power Delay-Locked Loop-Based 8x Frequency Multiplier In 22 Nm Fdsoi, Naveed, Jeff Dix

Electrical Engineering Faculty Publications and Presentations

A low-power delay-locked loop (DLL)-based frequency multiplier is presented. The multiplier is designed in 22 nm FDSOI and achieves 8× multiplication. The proposed DLL uses a new simple duty cycle correction circuit and is XOR logic-based for frequency multiplication. Current starved delay cells are used to make the circuit power efficient. The circuit uses three 2× stages instead of an edge combiner to achieve 8× multiplication, thus requiring far less power and chip area as compared to conventional phase-locked loop (PLL) circuits. The proposed 8× multiplier occupies an active area of 0.09 mm2. The measurement result shows ultra-low power consumption …

Analyzing The Effects Of Ultrafast Laser Processing On Mechanical Properties Of 3d-Printed Pla Parts, Darshan Pramodbhai Yadav

Theses and Dissertations

Recent advances in additive manufacturing technologies have already led to wide-scale adoption of 3D-printed parts in various industries. The expansion in choice of materials that can be processed, particularly using Fused Deposition Modeling (FDM), and the steady advancements in dimensional accuracy control have extended the range of applications far beyond rapid prototyping. However, additive manufacturing still has considerable limitations compared to traditional and subtractive manufacturing processes. This work addresses limitations associated with the as-deposited surface roughness of 3D-printed parts. The effects of roughness-induced stress concentrations were studied on ultimate tensile strength and fatigue life. The samples were manufactured using a …

Deep Learning And Generative Ai Approaches For Automated Diagnosis And Personalized Treatment: Bridging Machine Learning, Medicine, And Biomechanics In Predicting Tissue Mechanics And Biomaterial Properties., Yasin Shokrollahi

Theses and Dissertations

Machine learning, particularly deep neural networks, has demonstrated significant potential in predicting high-dimensional tasks across various domains. This work encompasses a detailed review of Generative AI in healthcare and three studies integrating machine learning with finite element analysis for predicting biomechanical behaviors and properties. Initially, we provide a comprehensive overview of Generative AI applications in healthcare, focusing on Transformers and Denoising Diffusion models and suggesting potential research avenues to address existing challenges.

Subsequently, we addressed soccer-related ocular injuries by combining finite element analysis and machine learning to predict retinal mechanics following a soccer ball hit rapidly. The prediction errors are …

Project Thetis: A Low-Cost, Low-Profile Inertial Data Logger, Braidan Duffy

Theses and Dissertations

This thesis details the design, testing, calibration, and verification of a nine degree of freedom inertial measurement data logger for use with floating bodies. The instrument was conceived to address limitations of equipment used in classes within the Ocean Engineering department at Florida Institute of Technology. By meeting with several stakeholders and end users, a series of stakeholder requirements, capabilities, and component-level requirements were de- veloped that informed the design constraints. There were several hardware iterations of the board, culminating in Revision F5 which was extensively tested and proven. The design was inspected after testing concluded to determine which capabilities …

Robust Uncertainty Estimation Framework In Deep Reinforcement Learning For Active Slam, Bryan Joseph Pedraza

Theses and Dissertations

Autonomous mobile robots are essential in various domains such as industry, manufacturing and healthcare. Navigating autonomously and avoiding obstacles are crucial tasks that involve localizing the robot to explore and map unknown environments without prior knowledge. Simultaneous localization and mapping (SLAM) present significant challenges. In this study, we introduce a new approach to address robust navigation and mapping of robot actions using Bayesian Actor-Critic (A2C) reinforcement learning. The A2C framework combines policy-based and value-based learning by dividing the model into two components: (1) the policy model (Actor) determines the actions based on the state, and (2) the value model (Critic) …

Sustainable Cities: Life-Cycle Cost Analysis Of Integrating Piezoelectric Harvesters Into Roadways, Heba Mohamed Gaber

Theses and Dissertations

Energy is essential in our modern era. Because of the increasing electricity consumption, sustainable and Renewable energy became a necessary global approach to fill the gap of the ongoing energy shortage in addition to the climate change crisis due to using conventional ways for energy production. Renewable energy is a global approach that has achieved great accomplishments during the last decades and is gradually increasing. Energy harvesting is considered one of the main resources for renewable energy. Energy harvesting from the roadways is an ingenious horizon for sustainable, clean, and renewable energy generation. Harvesting energy from the roadways by using …

Robust And Uncertainty-Aware Image Classification Using Bayesian Vision Transformer Model, Fazlur Rahman Bin Karim

Theses and Dissertations

Transformer Neural Networks have emerged as the predominant architecture for addressing a wide range of Natural Language Processing (NLP) applications such as machine translation, speech recognition, sentiment analysis, text anomaly detection, etc. This noteworthy achievement of Transformer Neural Networks in the NLP field has sparked a growing interest in integrating and utilizing Transformer models in computer vision tasks. The Vision Transformer (ViT) model efficiently captures long-range dependencies by employing a self-attention mechanism to transform different image data into meaningful, significant representations. Recently, the Vision Transformer (ViT) has exhibited incredible performance in solving image classification problems by utilizing ViT models, thereby …

Electromagnetic Field Analysis, Materials Characterization, And Advanced Modeling Of Modern Guitar Pickups, Luis Alonso Villarreal

Theses and Dissertations

This Thesis establishes the foundations of modern guitar pickup theory, enhancing current pickup design by an increase in voltage output, reduction of DC resistance, and a reduction of production costs. This research investigates factors that have received insufficient attention, such as the performance of different magnetic materials, magnet geometry, bobbin geometry, metal effects, etc. An equation to calculate the output of guitar pickups is developed. Additionally, this work constructs a modern pickup using the techniques developed in this thesis incorporating theory and advanced modeling techniques to simulate changes in performance and interactions with different magnetic materials and geometries. The new …

Laser Assisted Direct Writing Of Liquid Metal For Microprinting Applications, Olga Vargas Cruz

Theses and Dissertations

This paper presents a research study for potential printing of a Liquid Metal (LM) Eutectic Gallium Indium alloy (EGaIn) through the applications of the innovative additive manufacturing technology LIFT (Laser Induced Forward Transfer). LIFT is a precise printing technology that allows to create small, detailed printing. The liquid metal in study, EGaIn, has demonstrated great potential for microelectronics applications due to its minimum toxicity and high conductivity. Throughout this research different printing parameters are studied to comprehend the behavior of EGaIn printing with LIFT technique, these include laser energy, laser pulse, receiver material substrate, donor layer thickness, and …

Using Statistical Clustering Of Trajectory Data To Support Analysis Of Subject Movement In A Virtual Environment, Martín Alejandro Galicia Avila

Theses and Dissertations

The rising use of virtual reality software requires new methods of spatiotemporal analysis to enhance the user experience. This investigation is focused on forming clusters from spatiotemporal trajectories within a virtual environment and analyzing them in search of human immersion and behavior insights. The cluster centroids are plotted and analyzed to identify associations with the trajectories and user demographics.

Effects Of The Build Orientation And Support Patterns On The Geometric Accuracy In Printing Parts With Overhang Structure: An Experimental Study, Bala Murali Krishna Mohan

Theses and Dissertations

Additive manufacturing is becoming increasingly popular in industries such as manufacturing due to its ability to use raw materials more efficiently and require less machining than traditional methods(Calignano et al., 2017). However, constructing overhanging structures in additive manufacturing can be challenging, potentially affecting the overall geometric quality of the printed components. The objective of this study was to identify the most effective printing orientation for overhanging designs in Fused Deposition Modeling (FDM) using two different support structures. To achieve this, the researchers used a laser scanner to collect point cloud data and conducted a comparative study to determine the …