Engineering Commons^™

Bruxism Biofeedback Device, Claire A. Dossey, Errin S. Abasolo, Isabelle A. Starr

General Engineering

This paper aims to summarize the design process for a biofeedback bruxism device, covering the necessary background research, engineering requirements, design process, prototyping, manufacturing, and testing for the device. The purpose of this project was to design an engineering solution for the treatment of bruxism. This entails both measuring and significantly reducing clenching and grinding during sleep, as many current solutions may reduce symptoms of the disorder, but do not treat bruxism itself. Engineering requirements included biocompatibility, size and weight, electrical safety, and easy of use and comfort. Many design options were proposed, and a Pugh Matrix was used to …

The Acme Building Fire Hazards Analysis, Russ Livesay

Fire Protection Engineering: Culminating Experience Project Reports

This Fire Hazards Analysis (FHA) was written using modern fire protection engineering principles to characterize the Applied Chemistry Management and Enrichment (ACME) Building at the Pacific Northwest National Research Area (PNNRA) using both a prescriptive-based and performance-based analysis to ensure the building and occupants can be safe in fire conditions. Recommendations are made as part of this analysis to improve the survivability of this structure if a fire were to occur.

This building was found to be compliant with the prescriptive code requirements from the 2018 International Building Code except for a few minor issues that are currently being repaired. …

Design Fire Robert E. Kennedy Library, California Polytechnic State, San Luis Obispo, Jennifer Ocampo

Fire Protection Engineering: Culminating Experience Project Reports

This report evaluates the fire protection system of the Kennedy Building using a prescriptive approach and a performance-based design. The prescriptive approach evaluates code compliance of the structural design, fire suppression system, alarm and detection and smoke control. The performance-based design evaluates egress and life safety protection and three design fires that could potentially compromise the goals and objectives of the design.

The Kennedy Building is on the Campus of Cal Poly, San Luis Obispo and serves as the primary library of the university. This building has five stories of mixed occupancies. It is partially sprinklered, has limited automatic detection …

Food Processing And Campus Market (Building 24), Ian De Vries

Fire Protection Engineering: Culminating Experience Project Reports

This report provides a prescriptive and performance-based analysis of the Food Processing Building located on Cal Poly’s campus in San Luis Obispo, California. Food science and nutrition classes take place at the facility where faculty and students manufacture food products such as chocolates, jams, and barbecue sauces. The finished products are offered for sale in the building’s mercantile area, known as the Campus Market, in addition to other retail locations around the city. The Food Processing Building is considered mixed use with portions of the building classified as moderate-hazard factory (F-1), moderate-hazard storage (S-1), business (B), mercantile (M), and assembly …

Office Building In Moffett Park District, Cody Williams

Fire Protection Engineering: Culminating Experience Project Reports

The objective of this review is to analyze and evaluate the fire safety of a 5-story office building located in the Moffett Park District in Sunnyvale, California. The building is constructed largely of mass timber and classified as a Type IIIA building used primarily as office space. The first section of the report focuses on the building’s defining characteristics and use cases. The second portion of the report presents a comprehensive review of egress design, fire alarm systems, fire suppression systems, structural design, implementation of mass timber elements, and flammability requirements. The results of the analysis show that the building …

Fire Protection Engineering For Building A, Ai Choong Loh

Fire Protection Engineering: Culminating Experience Project Reports

Building A is a 9-storey mixed used development in Singapore to be completed in 2028. Fire safety provisions of Building A shall be in accordance with Singapore Fire Code 2018.

The report has analyzed the fire safety provisions in the area of structural fire protection provision, means of escape provision, automatic water suppression system provision, automatic fire detection and alarm system provision, engineering smoke control system provision, flammability assessment as well as performance based assessment.

Generally, building A complied to the prescriptive requirements of automatic water suppression system provision, automatic fire detection and alarm system, structural fire provision and means …

Biomechanical Knee Joint For Exoskeleton, Gabriel Ireton Ahern, Calloway Miller, Christianna Altamura, Eric Mailes

Mechanical Engineering

Our senior design project consisted of designing and manufacturing a biomechanically accurate, actuated knee joint to be integrated into an exoskeleton being developed by the Lower Limb Exoskeleton Assist Project (LLEAP), a part of the EMPOWER student association at Cal Poly, San Luis Obispo. As the human knee flexes and extends throughout gait motion, the center of rotation changes. Currently marketed exoskeletons have one point of rotation, which over constrains the knee and causes misalignment between the user and the suit [1]. Our goal was to mimic natural knee joint motion by changing the center or rotation, thus reducing misalignment …

Turbine Integrated Pitching System, Elizabeth Costley, Josephine Maiorano, Jeff Larson, Cameron Jackson

Mechanical Engineering

The Cal Poly Wind Power Club (CPWP) tasked this senior project to design, manufacture, test, and deliver a mechanism to pitch the blades for their small-scale horizontal axis wind turbine. CPWP competes in the Collegiate Wind Competition (CWC) against schools across the country, and as such it was critical to comply with the provided competition rules in addition to the design requirement from CPWP. The purpose of the pitching mechanism is to improve the performance and efficiency of the wind turbine by allowing the blades to adjust angles with different wind speeds. Specifically, this project aimed to minimize hub size, …

Prove Primary Battery Structure, John D. Burkhart, Andy Mccormick, Ryan Yu, Soren Barclay

Mechanical Engineering

In conjunction with Prototype Vehicle (PROVE) Laboratory, our group designed, manufactured, and tested a prototype structure to house the battery boxes for PROVE’s endurance vehicle. Our structure was designed to support the batteries during normal use, and in the event of a front crash. Our design is comprised of a secondary composite box to house the battery boxes, a bottom plate to affix the secondary box to the chassis floor, a horizontal plate fastened to the chassis, and a brace structure welded to the chassis. From the outset, we chose to use a secondary box, the primary battery boxes must …

Rapid Composter, Shannon Shinozaki, Avin Atencio, Jonathan Fraser, Lukas Kolbl, Russell Occhipinti

Mechanical Engineering

This project was created with the intent of automatically composting equine bio waste to be reused as plant fertilizer. The system consists of four subsystems: power generation and storage, automatic controls, aeration, and structure. Each subsystem may be manufactured independently, then put together. This system will not have access to power outlets, so it was designed to be solar-powered.

Parametric Bicycle Yoke, Colin Reay, Walter Minehart, Robby Harrigan, Jordan Olson

Mechanical Engineering

This report outlines the entire design, fabrication, and validation process of a parametric yoke design that addresses the packaging problem of the bottom-bracket chainstay junction in modern bicycle frames. The goal was to create an elegant, space-efficient solution that is accessible to the Cal Poly Bike Builders Club. The report includes documentation of the three-part fixture system, manufacturing process, and testing results for the yoke.

Our yoke design outperforms traditional round-tube weldments in torsional and vertical stiffness. Additionally, all manufacturing fixtures and machining operations function as intended, resulting in a finished yoke that meets all required tolerances in under an …

Treadmill Platform For Quadrupedal Robots, Baxter J. Bartlett, Jack F. Butler, Phillip A. Shafik, Tarun S. Ganamur

Mechanical Engineering

Cal Poly Legged Robots, led by Professor Refvem and Professor Xing, has been leading Cal Poly’s attempts to simulate, produce, and test their legged robots. The initial testing of the locomotion of these robots can be dangerous to the robot since any bugs in the code could cause the robot to fall over and harm itself. Our responsibility as a team was to deliver a portable platform for testing the locomotion capabilities containing a fall prevention mechanism. In short, we have designed a platform for this purpose that consists of a treadmill surrounded by a wheeled chassis with a system …

Perforated Groove Cam Lock, Matthew J. Redmond, Samuel A. Potter, Dylan Weiglein, Andrew Reese

Mechanical Engineering

NASA Artemis III astronauts need a way to attach and detach various tools to an extension handle to be used during lunar EVA sample collection. Because lunar dust is so harsh and abundant, mechanisms must be designed to function regardless of the number of contact particulates. Past designs used on the Apollo missions proved to be problematic for their operators, opening the door for innovative improvement. A new mechanism has been proposed that directly addresses the performance issues of the original handle extension mentioned in NASA’s Apollo mission reports. The new mechanism boasts an open design that promotes dust tolerance …

3d Printed Aircraft, Matthew Nagy, Charles D'Amico, Alexis Salgado Medina

Mechanical Engineering

This project is to design, build, and test a 3D-printable aircraft. The goal is to create a final design that will be able to fly for the longest duration possible, around 20 seconds. To determine the correct preliminary design and manufacturing process for a 3D printed RC aircraft, an analysis of multiple design options and manufacturing materials was performed. This allowed for a variety of choices for aircraft type, airfoil design, structure, among other topics to be narrowed down to the most promising option. It has been found that the aircraft will follow a design similar to industry motor-gliders, with …

Backflow Relief Valve Test Stand, Olivia Mcnulty, Wiill Halvorsen, Ryan Dubois, David Leaman

Mechanical Engineering

This Final Design Review (FDR) document details the final design, manufacturing, testing, and results of the Zurn Wilkins Backflow Relief Valve Test Stand Project under the sponsorship of Brian Yale and Rueben Westmoreland. This project involves simulating real-world conditions of static pressure and water hammer cycling. The stand will give Zurn Wilkins’ engineers a method by which to test their relief valves prior to a rigorous, yearlong University of Southern California (USC) testing procedure. Our design involves using city water, a pump, a Zurn backflow preventer, and a control system to apply specific pressures to each end of the relief …

Saver: Surface Autonomous Vehicle For Emergency Rescue, Lucas Je Sandsor, Michelangelo Coltelli, Brian Wong, Sebastion Rivero, Kobe Hayashi

Mechanical Engineering

The design, fabrication, and testing of an unmanned surface vehicle for the NASA Micro-G NExT SAVER challenge. This device features a radio direction finding phase array to autonomously navigate to an emergency distress beacon to deliver emergency supplies.

Practical Podcasting: A Technical Guide To Producing Studio-Quality Podcasts, Jacob Sarmiento

Liberal Arts and Engineering Studies

Podcasting exists at the intersection of the technical aspects of audio engineering and disciplines such as journalism and story-telling. Podcasts at KCPR, the student radio station, cover a wide range of topics including the soundscape of the DIY music scene in San Luis Obispo (SLO) on SLO-Fi, the intricacies of navigating SLO on Cal Poly 101, the best of Cal Poly Athletics on The Gallop, and the voices of underrepresented populations on campus on Different Matters. KCPR utilizes podcasts to entertain and inform its audience of the various experiences possible as a Cal Poly student. As a student-run entity, KCPR …

Board 342: Moving Toward Transdisciplinary Learning Around Topics Of Convergence: Is It Really Possible In Higher Education Today?, Greg Strimel, Douglas Edward Pruim, Deana Lucas, Todd R. Kelley, Jung Joo Sohn

Technology Leadership and Innovation Faculty Publications

There have been numerous demands for enhancements in the way undergraduate learning occurs today, especially at a time when the value of higher education continues to be called into question. One type of demand has been for the increased integration of subjects/disciplines around relevant issues/topics—with a more recent trend of seeking transdisciplinary learning experiences for students. Transdisciplinary learning can be viewed as the holistic way of working equally across disciplines to transcend their own disciplinary boundaries to form new conceptual understandings as well as develop new ways in which to address complex topics or challenges. This transdisciplinary approach can be …

Refactoring Dependency Loading And Standardizing Factory Patterns In The Horizon Simulation Framework, Jack W. Kelly

Master's Theses

The Horizon Simulation Framework (HSF) is an open-source community driven mod- eling and simulation tool developed over 15 years by a lineage of Cal Poly graduate students. The tool excels in its flexibility to model an assortment of complex systems, with prebuilt modeling elements available for the simulation of space missions. A high-level simulation tool like HSF lends itself to an agile development cycle as system constraints can be quickly identified through day in the life simulation of the modeled system. The objective of the work presented in this thesis is to refactor the way in which several modeling elements …

Clinical Utility Of Mesenchymal Stem/Stromal Cells In Regenerative Medicine And Cellular Therapy, Vitali V. Maldonado, Neel H. Patel, Emma E. Smith, C. Lowry Barnes, Michael P. Gustafson, Raj R. Rao, Rebekah M. Samsonraj

Biomedical Engineering Faculty Publications and Presentations

Mesenchymal stem/stromal cells (MSCs) have been carefully examined to have tremendous potential in regenerative medicine. With their immunomodulatory and regenerative properties, MSCs have numerous applications within the clinical sector. MSCs have the properties of multilineage differentiation, paracrine signaling, and can be isolated from various tissues, which makes them a key candidate for applications in numerous organ systems. To accentuate the importance of MSC therapy for a range of clinical indications, this review highlights MSC-specific studies on the musculoskeletal, nervous, cardiovascular, and immune systems where most trials are reported. Furthermore, an updated list of the different types of MSCs used in …

Residual Vulnerabilities To Power Side Channel Attacks Of Lightweight Ciphers Cryptography Competition Finalists, Aurelien Mozipo, John M. Acken

Electrical and Computer Engineering Faculty Publications and Presentations

The protection of communications between Internet of Things (IoT) devices is of great concern because the information exchanged contains vital sensitive data. Malicious agents seek to exploit those data to extract secret information about the owners or the system. Power side channel attacks are of great concern on these devices because their power consumption unintentionally leaks information correlatable to the device's secret data. Several studies have demonstrated the effectiveness of authenticated encryption with advanced data, in protecting communications with these devices. A comprehensive evaluation of the seven (out of 10) algorithm finalists of the National Institute of Standards and Technology …

An Examination Of The Stiffness Terms Needed To Model The Dynamics Of An Eddy Current Based Maglev Vehicle, Colton W. Bruce, Jonathan Bird

Electrical and Computer Engineering Faculty Publications and Presentations

This paper re-examines the basis for each eddy current stiffness term computed from prior published steady-state eddy current models. The paper corrects prior analysis work by confirming, through the use of 2-D and 3-D dynamic finite element analysis modelling, that when a magnetic source is moving over an infinite-wide and infinite-long conductive sheet guideway the steady-state lateral and translational stiffness terms will be zero and only the vertical coupled stiffness terms need to be modelled. Using these observations, a much simplified 6 degrees-of-freedom (DoF) linearized eddy current dynamic force model can be used to compute the steady-state force changes in …

Spheroidization Heat Treatment Conditions With Data Analysis In Medium Carbon Cr-Mo Steel For Ultra High Strength Cold Heading, Yong Deok Jo, Sung Yi, Byoung Lok Jang

Mechanical and Materials Engineering Faculty Publications and Presentations

The degree to which parameters affect the spheroidization heat treatment of steel was calculated by setting the spheroidization heat treatment conditions of Cr-Mo steel and using data analysis such as S/N ratio and ANOVA. After analyzing the transformation temperatures of the steel, A_c1 and A_c3, using a DSC, the conditions were set accordingly. The surface hardness was measured for the conditions and used as an evaluation index. The correlation was analyzed by comparing the spheroidized volume fraction and the surface hardness, and the Pearson correlation coefficient was -0.88, proving that a correlation existed between the two values. …

Measurement Of Polycyclic Aromatic Hydrocarbons (Pahs) On Indoor Materials: Method Development, Aurélie Laguerre, Elliott T. Gall

Mechanical and Materials Engineering Faculty Publications and Presentations

Wildfire smoke penetrates indoors, and polycyclic aromatic hydrocarbons (PAHs) in smoke may accumulate on indoor materials. We developed two approaches for measuring PAHs on common indoor materials: (1) solvent-soaked wiping of solid materials (glass and drywall) and (2) direct extraction of porous/fleecy materials (mechanical air filter media and cotton sheets). Samples are extracted by sonication in dichloromethane and analyzed with gas chromatography–mass spectrometry. Extraction recoveries range from 50–83% for surrogate standards and for PAHs recovered from direct application to isopropanol-soaked wipes, in line with prior studies. We evaluate our methods with a total recovery metric, defined as the sampling and …

The Role Of High-Order Anharmonicity And Off-Diagonal Terms In Thermal Conductivity: A Case Study Of Multi-Phase Cspbbr3, Xiangdong Ding, Guimei Zhu, Yi Xia, Jie Ren, Jun Sun, Multiple Additional Authors

Mechanical and Materials Engineering Faculty Publications and Presentations

We investigate the influence of three- and four-phonon scattering, perturbative anharmonic phonon renormalization, and off-diagonal terms of coherent phonons on the thermal conductivity of CsPbBr3 phase change perovskite, by using advanced implementations and first-principles simulations. Our study spans a wide temperature range covering the entire structural spectrum. Notably, we demonstrate that the interactions between acoustic and optical phonons result in contrasting trends of phonon frequency shifts for the high-lying optical phonons in orthorhombic and cubic CsPbBr3 as temperature varies. Our findings highlight the significance of wavelike tunneling of coherent phonons in ultralow and glasslike thermal conductivity in halide perovskites.

Solving Supersonic Flows Using The Method Of Integral Relations In Python, Eddie Hsieh

Master's Theses

This thesis presents a modern approach to the Method of Integral Relations implemented in the Python programming language. This work is based on South's reports on solving supersonic conical flows and Belotserkovskii's publications on solving supersonic flows over blunt bodies. The Python SciPy library is extensively used in this thesis. A root finder module is used to perform South's solution process, and the Runge-Kutta ODE solver with dense output is implemented to replicate Belotserkovskii's solution process. The implementation of Python makes the development efficient and serves as an open-source framework for future work to build on. This work focuses on …

Range-Doppler Map Processing Chain For Marine Radar On Fpga Of An Rfsoc, Nickolas W. Ogilvie

Master's Theses

To improve the accuracy and resolution of the measurements, radar systems employ increasingly complex, resource-intensive signal processing, larger bandwidths, and higher carrier frequencies. However, implementing these improvements requires more expensive, complex electronics that are larger and use more power. Using RFSoC (Radio Frequency System on Chips) in radars can address these challenges. By combining processors, an FPGA (Field Programmable Gate Array), and RF data converters into a single integrated circuit, RFSoCs allow for radar electronics that are physically smaller, use less power, and are simpler to design. As using RFSoCs to perform RF data conversion for radars has been already …

Design And Implementation Of A Prototype Pendulum Platform For Aerospace Controls Education, Zachary A. Wright

Master's Theses

This thesis presents a modular, low-cost, prototype inverted pendulum platform for undergraduate Aerospace control theory research and education. The platform's default configuration integrates a propeller and reaction wheel as its actuators, with multiple sensors available to measure the pendulum's states. The platform utilizes open-source software and hardware to power the actuators, and uses MATLAB/Simulink to streamline data collection. System identification techniques are applied to the platform, and the mathematical model of the pendulum is verified. Momentum exchange between the reaction wheel and propeller during closed-loop stabilization of the pendulum is demonstrated.

Composite Solid Rocket Motor Case Optimization With Matlab Genetic Algorithm, Aleksandr Breit

Master's Theses

This study utilizes MATLAB genetic algorithm (GA) to perform optimization on a solid rocket motor (SRM) chamber structure. The (SRM) structure is modelled as a cylindrical composite laminate where unidirectional fiber orientations are the primary design variable in the optimization problem formulation. Additional design variables such as chamber length, diameter, and internal pressure are altered along with the ply angles to minimize the safety margin towards a near-zero value and encourage efficient layup design. Classical lamination theory with Tsai-Wu failure criterion are used to calculate ply-level safety margins. A thickness minimization scheme is employed to reduce the ply count from …

Enhancing Telecom Churn Prediction: Adaboost With Oversampling And Recursive Feature Elimination Approach, Long Dinh Tran

Master's Theses

Churn prediction is a critical task for businesses to retain their valuable customers. This paper presents a comprehensive study of churn prediction in the telecom sector using 15 approaches, including popular algorithms such as Logistic Regression, Support Vector Machine, Decision Tree, Random Forest, and AdaBoost.

The study is segmented into three sets of experiments, each focusing on a different approach to building the churn prediction model. The model is constructed using the original training set in the first set of experiments. The second set involves oversampling the training set to address the issue of imbalanced data. Lastly, the third set …