Engineering Commons^™

Mechanical Testing Data From Neutron Irradiations Of Pm-Hip And Conventionally Manufactured Nuclear Structural Alloys, Yaqiao Wu

Materials Science and Engineering Faculty Publications and Presentations

This article presents the comprehensive mechanical testing data archive from a neutron irradiation campaign of nuclear structural alloys fabricated by powder metallurgy with hot isostatic pressing (PM-HIP). The irradiation campaign was designed to facilitate a direct comparison of PM-HIP to conventional casting or forging. Five common nuclear structural alloys were included in the campaign: 316L stainless steel, SA508 pressure vessel steel, Grade 91 ferritic steel, and Ni-base alloys 625 and 690. Irradiations were carried out in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) to target doses of 1 and 3 displacements per atom (dpa) at target temperatures …

Impacts Of A Cascadia Subduction Zone Earthquake On Water Levels And Wetlands Of The Lower Columbia River And Estuary, M. W. Brand, Heida Diefenderfer, J. E. O’Connor, Amy B. Borde, D. A. Jay, Aqeel Al-Bahadily, M. Mckeon, S. A. Talke

Civil and Environmental Engineering Faculty Publications and Presentations

Subsidence after a subduction zone earthquake can cause major changes in estuarine bathymetry. Here, we quantify the impacts of earthquake-induced subsidence on hydrodynamics and habitat distributions in a major system, the lower Columbia River Estuary, using a hydrodynamic and habitat model. Model results indicate that coseismic subsidence increases tidal range, with the smallest changes at the coast and a maximum increase of ∼10% in a region of topographic convergence. All modeled scenarios reduce intertidal habitat by 24%–25% and shifts ∼93% of estuarine wetlands to lower-elevation habitat bands. Incorporating dynamic effects of tidal change from subsidence yields higher estimates of remaining …

Incentivizing Electric Vehicle Adoption Through State And Federal Policies: Reviewing Influential Policies, Joshua Sabata, Subhaditya Shom, Ahmad Almaghrebi, Anne Mccollister, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

All-electric vehicles (EVs), battery-powered EVs (BEVs), and plug-in hybrid EVs (PHEVS) are gaining market share and increasing in popularity with the buying public because the battery range (longer) and cost (lower) have reached sweet spots, the charging infrastructure is more robust, and concern with global cli­mate change is high. In 2013, only 100,000 EVs were sold in the United States, but by 2022, approximately 800,000 have been purchased. A similar growth is seen in EV sup­ply equipment (EVSE), i.e., EV charging stations, with 19,742 documented EV charging station locations in the United States in 2013 to 50,054 documented EV charging …

Gyroless Nanosatellite Attitude Determination Using An Array Of Spatially Distributed Accelerometers, Kory J. Haydon

Master's Theses

The low size and budget of typical nanosatellite missions limit the available sensors for attitude estimation. Relatively high noise MEMS gyroscopes often must be employed when accurate knowledge of the spacecraft’s angular velocity is necessary for attitude determination and control. This thesis derived and tested in simulation the “Virtual Gyroscope” algorithm, which replaced a standard gyroscope with an array of spatially distributed accelerometers for a 1U CubeSat mission. A MEMS accelerometer model was developed and validated using Root Allan Variance, and the Virtual Gyroscope was tested both in the open loop configuration and as a replacement for a gyroscope in …

Control Of The Electroporation Efficiency Of Nanosecond Pulses By Swinging The Electric Field Vector Direction, Vitalii Kim, Iurii Semenov, Allen S. Kiester, Mark A. Keppler, Bennett L. Ibey, Joel N. Bixler, Ruben M. L. Colunga Biancatelli, Andrei G. Pakhomov

Bioelectrics Publications

Reversing the pulse polarity, i.e., changing the electric field direction by 180°, inhibits electroporation and electrostimulation by nanosecond electric pulses (nsEPs). This feature, known as “bipolar cancellation,” enables selective remote targeting with nsEPs and reduces the neuromuscular side effects of ablation therapies. We analyzed the biophysical mechanisms and measured how cancellation weakens and is replaced by facilitation when nsEPs are applied from different directions at angles from 0 to 180°. Monolayers of endothelial cells were electroporated by a train of five pulses (600 ns) or five paired pulses (600 + 600 ns) applied at 1 Hz or 833 kHz. Reversing …

Autonomous Attitude Consensus For Nanosatellite Formations In Leo, Laird J. Mendelson

Master's Theses

Consensus strategies are examined as a possible approach to achieving attitude alignment for a large, close-proximity formation of nanosatellites in low earth orbit (LEO). An attitude-only distributed consensus approach is selected for further consideration due to its comparatively low data transmission requirements. The convergence of a connected network of satellites to the attitude agreement subspace under this control law is shown using a Lyapunov stability approach with a set of idealizing assumptions. A moderate-fidelity simulation demonstrates the performance of the control law under realistic conditions that violate those assumptions. Particular emphasis is placed on the conditions that arise from the …

Neural Compression Inference Accelerator: A Cost And Energy-Effective Alternative To Conventional Machine Learning Inference Methods, Matthew Wallace

Master's Theses

Recent developments in machine learning and artificial intelligence have sparked an influx of workloads that require specialized computer hardware for cloud services. The hardware running machine learning models predominantly consists of graphics processing units (GPUs) and tensor processing units (TPUs). However, these com- ponents are expensive for cloud services to purchase, costly for customers to rent, prone to price spikes, and energy-intensive. In this research we show that both cloud services and customers would benefit from utilizing field programmable gate arrays (FPGAs) to alleviate the aforementioned challenges. An FPGA can be configured as a machine learning accelerator, operating similarly to …

Finfet Based Low Power Techniques For The Power Management Of Iot Devices, Anna Merine George, S Y Kulkarni Dr.

Manipal Journal of Science and Technology

The ability of IoT devices to self-power is a crucial requirement for achieving self-sustainability. The design of such a system requires a notable maintenance cost that emphasizes the demand for developing battery-less IoT devices. This paper presents a novel FinFET-based power management circuitry for an IoT application. Energy management is addressed by coupling low-power features in hardware with low-power system-level techniques. The market demand and surge in portable electronic devices have pushed the semiconductor industry to create circuit designs functioning at Low Voltage (LV) for Low Power (LP) consumption. Leakage power has become a severe problem in LV and LP …

Lighting Industry-University Collaboration: Enabling Collaborator-Based Evaluation Of Performance, Amardeep M. Dugar

Manipal Journal of Science and Technology

This paper explores a theoretical framework, the antecedent factors that shape it, and a practical interactive study for formalizing industry-university collaborations in the field of lighting. The framework uses an identity paradigm – an educational identity for the lighting industry and an entrepreneurial identity for universities. It further argues that such an identity exchange provides better avenues to address the performance of industry-university collaborations. These collaborations are viewed as learning interactions and decisions based on knowledge transfer between individuals from the lighting industry and universities. The proposed interactive study using survey research will be designed to enable participating individuals from …

Preliminary Bond Capacity Exploration Between Monolayer Graphene And Cementitious Composites, Yanping Zhu, Chuanrui Guo, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Study Aims to Explore Bond Capacity between Monolayer Graphene and Cementitious Composites for the First Time through a Pullout Test. the Low-Pressure Chemical Vapor Deposition Method Was Used to Synthesize Monolayer Graphene on the Copper Substrate to Be Embedded in the Mortar Made by the Briquette Mold. the Bond Capacity between Them Was Higher Than the Tensile Strength of the Copper Sheet with As-Grown Monolayer Graphene on the Surface Since All Specimens Failed in Fracture with Embedment Length of More Than 30 Mm. the Monolayer Graphene Enhanced the Copper Tensile Fracture Stress and Normalized Energy during the Test as …

Coating Condition Detection And Assessment On The Steel Girder Of A Bridge Through Hyperspectral Imaging, Pengfei Ma, Jiaoli Li, Ying Zhuo, Pu Jiao, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The organic coating of bridge steel girders is subjected to physical scratches, corrosion, and aging in natural weathering. The breakdown of the coating may cause serviceability and safety problems if left unnoticed. Conventional coating inspection is time-consuming and lacks information about the coating's chemical integrity. A hyperspectral imaging method is proposed to detect the condition of steel coatings based on coating-responsive features in reflectance spectra. A field test was conducted on the real-world bridge, which shows obvious signs of degradation. The hyperspectral signature enables an assessment of the coating's health and defect severity. The results indicated that the coating scratch …

Fate And Distribution Of Orally-Ingested Ceo2-Nanoparticles Based On A Mouse Model: Implication For Human Health, Xingmao Ma, Xiaoxuan Wang, Lei Xu, Honglan Shi, Hu Yang, Kerstin K. Landrock, Virender K. Sharma, Robert S. Chapkin

Chemistry Faculty Research & Creative Works

The use of nanoparticles in agrichemical formula and food products as additives has increased their chances of accumulation in humans via oral intake. Due to their potential toxicity, it is critical to understand their fate and distribution following oral intake. Cerium oxide nanoparticle (CeO2NP) is commonly used in agriculture and is highly stable in the environment. as such, it has been used as a model chemical to investigate nanoparticle's distribution and clearance. based on their estimated human exposure levels, 0.15–0.75 mg/kg body weight/day of CeO2NPs with different sizes and surface charges (30–50 nm with negative charge and <25 >nm with positive …

Alkali-Silica Reaction Mitigation Using Alternative Supplementary Cementitious Materials, Craig Newtson, Judit M. Garcia, Seyedsaleh Mousavinezhad

Data

Over the past few decades, Class F fly ash has been widely used in concrete as a supplementary cementitious material (SCM) due, in part, to its ability to mitigate alkali-silica reaction (ASR). However, future availability of fly ash is uncertain as the energy industry shifts towards renewable sources, resulting in the closure of coal-burning power plants. Therefore, there is a growing need to find alternatives to fly ash that are both cost effective and environmentally friendly. This study aimed to evaluate the effectiveness of ground-granulated blast furnace slag (GGBFS), metakaolin, and a locally available natural pozzolan mined from a pumicite …

Accelerated Sulfate Attack Testing For Concrete, Craig Newtson, Seyedsaleh Mousavinezhad, William Toledo, Federico Aguayo

Data

Extensive research has been conducted on sulfate attack of concrete structures, however, the need to adopt use of more sustainable materials is driving a need for a quicker test method to assess sulfate resistance. Class F fly ash, which is a byproduct of coal combustion for electricity generation, has historically been used in concrete mixtures to improve sulfate resistance. However, environmental considerations and evolving energy industry has decreased its availability, requiring the identification of economically viable and environmentally friendly alternatives to fly ash. Another challenge in addressing sulfate attack durability issues in concrete is that the standard sulfate attack test …

Alkali-Silica Reaction Mitigation Using Alternative Supplementary Cementitious Materials, Craig Newtson, Judit M. Garcia, Seyedsaleh Mousavinezhad

Publications

Over the past few decades, Class F fly ash has been widely used in concrete as a supplementary cementitious material (SCM) due, in part, to its ability to mitigate alkali-silica reaction (ASR). However, future availability of fly ash is uncertain as the energy industry shifts towards renewable sources, resulting in the closure of coal-burning power plants. Therefore, there is a growing need to find alternatives to fly ash that are both cost effective and environmentally friendly. This study aimed to evaluate the effectiveness of ground-granulated blast furnace slag (GGBFS), metakaolin, and a locally available natural pozzolan mined from a pumicite …

Accelerated Sulfate Attack Testing For Concrete, Craig Newtson, Seyedsaleh Mousavinezhad, William Toledo, Federico Aguayo

Publications

Extensive research has been conducted on sulfate attack of concrete structures, however, the need to adopt use of more sustainable materials is driving a need for a quicker test method to assess sulfate resistance. Class F fly ash, which is a byproduct of coal combustion for electricity generation, has historically been used in concrete mixtures to improve sulfate resistance. However, environmental considerations and evolving energy industry has decreased its availability, requiring the identification of economically viable and environmentally friendly alternatives to fly ash. Another challenge in addressing sulfate attack durability issues in concrete is that the standard sulfate attack test …

Investigating Disparities And Safety Equity In Pedestrian Nighttime Crashes In Michigan, Sia Isaria Mwende

Masters Theses

For the past eleven years (2011 - 2021) in Michigan, 76 percent of all fatal pedestrian crashes occurred at night. Over the same period, about 36 percent of pedestrian nighttime crashes were fatal or incapacitating (KA), while only 25 percent of daytime pedestrian crashes were fatal or incapacitating (KA). Previous studies suggest that, overall, poor neighborhoods and racial minorities are associated with more pedestrian crashes. With more fatal and incapacitating pedestrian crashes occurring at night, it is imperative to examine how these crashes are distributed by economic status and racial makeup. Therefore, this study aims to investigate the racial and …

Assessing Boil Water Notices As Health-Risk Communication: Risk Perceptions, Efficacy, And Compliance During Winter Storm Uri, Ashleigh M. Day, Sydney O'Shay, Khairul Islam, Matthew W. Seeger, Shawn P. Mcelmurry

Open Data at Wayne State

Winter Storm Uri was an extreme disaster that impacted much of the United States during February of 2021. Texas and Oklahoma were generally not prepared for such an event and experienced massive power grid failures. This led to cascading risks including water system disruptions and many boil water notices (BWNs). The breakdown of some communication channels and the inability to enact protective actions due to power outages, as well as travel limitations on public roads, complicated both dissemination and implementation. Under these conditions, a non-representative, cross-sectional, survey was collected to assess individuals experience BWNs and how perceived efficacy impacts compliance. …

Freeze-Thaw Damage Assessment Of Engineered Cementitious Composites Using The Electrochemical Impedance Spectroscopy Method, Ru Bai, Shuguang Liu, Changwang Yan, Ji Zhou, Lihe Lu, Lin Li

Civil and Architectural Engineering Faculty Research

The mechanical properties of engineered cementitious composites (ECC) in service in cold regions can be significantly degraded by periodic freezing and thawing. In this work, the damage degree of freeze–thaw of ECC was systematically assessed by using the electrochemical impedance spectroscopy (EIS) technique. In addition, Nuclear Magnetic Resonance (NMR) Relaxometry measurements were also performed to obtain pore structure parameters, and the uniaxial tensile tests were also carried out to analyse the tensile performance after freeze–thaw cycles. From the acquired results, it was demonstrated that the EIS behaviour of ECC varied with the freeze–thaw cycles. The diameter of the Nyquist curve …

Biopolymer-Based Sustainable Food Packaging Materials: Challenges, Solutions, And Applications, Kalpani Y. Perera, Amit Jaiswal, Swarna Jaiswal

Articles

Biopolymer-based packaging materials have become of greater interest to the world due to their biodegradability, renewability, and biocompatibility. In recent years, numerous biopolymers—such as starch, chitosan, carrageenan, polylactic acid, etc.—have been investigated for their potential application in food packaging. Reinforcement agents such as nanofillers and active agents improve the properties of the biopolymers, making them suitable for active and intelligent packaging. Some of the packaging materials, e.g., cellulose, starch, polylactic acid, and polybutylene adipate terephthalate, are currently used in the packaging industry. The trend of using biopolymers in the packaging industry has increased immensely; therefore, many legislations have been approved …

Finite Element Analysis Of A Coconut (Cocos Nucifera L.) Climbing Mechanism, Arjay O. Afan, Omar F. Zubia, Adrian A. Borja, Ralph Kristoffer B. Gallegos

The Philippine Agricultural Scientist

A coconut climber mechanism was subjected to Finite Element Analysis (FEA) to improve its overall design and analyze its strength characteristics. The von Mises stress, total deformation, and factor of safety were evaluated using static structural analysis for the seat and pedal assemblies of the mechanism. The design has a minimum yielding factor of safety of 7.03 for the seat assembly and 12.09 for the pedal assembly. If aluminum is used as an alternative to steel, the prototype's weight can be reduced to at least 64.56% without compromising its strength properties. The weight reduction by using aluminum is expected to …

Paired Storage Distributed Energy System Design For A Local Community Farm, Neil Albert Collison, Lily Goldman

Electrical Engineering

This project considers the design of a renewable energy microgrid for a 19-acre community farm in San Luis Obispo, CA as the farm seeks to increase the magnitude of its electrical loads, and gain back-up electrical capability. The microgrid design will enable lower carbon emissions, reduce demand on the utility grid while saving on energy costs, and provide improved reliability and resiliency to the operator of the community farm. The eventual implementation of the design by a professional engineering entity will allow the community farm to expand its education program to include renewable energy as well as gain notoriety in …

Energy Storage And Communication System, Noah R. Johnson, Marc Wong

Electrical Engineering

The Industrial Power and Controls Lab in Engineering East is welcoming the addition of a new lab course, EE 435. Schneider Electric sponsors this course, which seeks to teach students how to use the Modicon M580 Program Logic Controller (PLC) in various industry use cases. This project is a continuation of previous senior projects and focuses on developing a lab experiment to teach students how to utilize the M580 in an energy storage use case. More specifically, it focuses on the battery management system that oversees the units and exposes students to the various situations this system may encounter during …

Cubicom: Noisy Office Environment Communication Device, Nicholas Alan Maley, Joshua Michael Heeren, Alejandro Peña

Electrical Engineering

The CubiCom is a system that enables secure and clear communication between users in a noisy office space. It can function in any small cubicle within a 12 foot radius. The system consists of a series of wireless headsets for 6 users to transmit and receive audio, and a communication box that facilitates this process. These headsets are noise-dampening, preventing ambient sounds from interrupting conversation and making sure that all parties can hear each other clearly. Line-of-sight (L.O.S.) with each headset is required to have proper communication between users. This feature ensures no one outside of the room can eavesdrop, …

Power Thyristor Controller For Speed Control Of Dc Motor, Alejandra Zapata, Morgan Erich Boehme, Abdullah Mohammed Awidah, Payton Robert Chalstrom

Electrical Engineering

In this work, a Power Thyristor Controller for Speed Control of DC Motor has been developed with the purpose of replacing an existing simulation experiment, aiming to effectively implement the principle of learning by doing. The primary objective of the experiment setup is to illustrate the fundamental principles and operational mechanisms underlying the firing angle and controlled bridge rectifier. The new experiment is taking advantage of the existing FCRO4100 Single Phase Firing Board that was donated to the University by ENERPRO. The pre-programmed microcontroller is connected to the thyristor bridge rectifier that’s powered by 24VAC. Additionally, a DC motor will …

Audio Research Codec, Charlie Sutro

Electrical Engineering

Active Noise and Vibration Control (ANVC) systems are of increasing relevance as urban areas get more densely populated with people and their noise sources. Community noise is of great importance to many forms of transit that aim to bring mobility to a region with minimal subsequent noise pollution. Active Vibration Control (AVC) is an emerging field of research which can be employed to further mitigated unwanted harshness in an acoustic environment by extending the principals of Active Noise Control (ANC)to solid mediums using surface transducers and piezoelectric actuators.

The Audio Research Codec (ARC) is a compact, cost-effective system designed for …

Poster: Integrated Dc Microgrid Testbed For Quality Of Service Evaluation, Yasin Emir Kutlu, Ruairí De Fréin, Malabika Basu, Ali Malik

Conference papers

This study demonstrates a testbed for evaluating the effects of background network traffic on the Round-Trip Times (RTTs) of community-based integrated Direct Current (DC) Microgrid (MG) testbed using real hardware and different networking topologies.

The effects of difference levels of background traffic on the RTT of control packets are demonstrated.

Modeling Potential Damages Of Hurricanes At The Facility Scale: A Case Study Of Eglin Air Force Base, Alexander J. Baldwin, Christopher M. Chini, Steven J. Schuldt, Justin D. Delorit

Faculty Publications

Tropical cyclones have intensified and are expected to strengthen throughout the 21st century due to climate change impacts. Storm intensification poses a serious threat to coastal municipalities and infrastructure that are not designed to withstand future wind and storm surge potential. Coupled modeling software has been widely used to replicate extreme weather events and simulate climate change effects to understand the magnitude of vulnerability coastal regions face. However, these studies are often conducted at too coarse resolutions to provide decision makers with actionable information for facility-level adaptation. This study addresses this limitation using a coupled modeling approach by simulating climate-intensified …

Hybrid Model To Evaluate The Frequency-Dependent Leakage Inductance Of Partially-Filled Transformers, Angshuman Sharma, Jonathan W. Kimball

Electrical and Computer Engineering Faculty Research & Creative Works

The leakage inductance of a transformer designed for a power electronic converter can drop significantly as the switching frequency is increased due to skin and proximity effects. Although the magnetic image method-Based double-2-D model can predict the low-frequency leakage inductance of a partially filled transformer with sufficient accuracy, it is inherently a frequency-independent model. While Dowell's 1-D model uses frequency-dependent relations to account for both skin and proximity effects, its accuracy is severely affected by the assumed winding geometry. in this paper, a semi-analytical hybrid model is proposed that uses superposition to combine a modified Dowell's model with the double-2-D …

Participation Of Electric Vehicle Aggregators In Wholesale Electricity Markets: Recent Works And Future Directions, Saeed Salimi Amiri, Fazlur Rahman Bin Karim, Pedro Cesar Lopes Gerum

Electrical and Computer Engineering Faculty Publications

Electric Vehicles are key to reducing carbon emissions while bringing a revolution to the transportation sector. With the massive increase of EVs in road networks and the growing demand for charging services, the electric power grid faces enormous system reliability and operation stability challenges. Demand and supply disparities create inconsistency in the smooth delivery of electrical power. As a potential solution, EVs and their charging infrastructure can be aggregated to prevent the unwanted effects on power systems and also facilitate ancillary services to the power grid. When not need for transportation purposes, EVs can leverage their batteries for power grid …