Engineering Commons^™

Graphite: Open Source 2d Graphics Editor, Christopher H. Mendoza, Oliver A. Dolan

Computer Science and Software Engineering

Graphite is an open source 2D graphics editor aiming to provide a useful alternative to the Adobe product suite while integrating modern ideas from research and industry, including a node-based procedural approach that makes the design process fully non-destructive. Tools from the VFX and gamedev industry like Nuke, Houdini, and Substance Designer have proven the power and flexibility of node-based systems, but they are each lacking in their user experience because of the deep level of complexity that is not abstracted into simpler concepts for users (Adobe Systems, SideFX, The Foundry Visionmongers Ltd., n.d.). Graphite puts the node-based core into …

Experimental And Machine Learning Studies On Chitosan-Polyacrylamide Copolymers For Selective Separation Of Metal Sulfides In The Froth Flotation Process, Keitumetse Monyake, Taihao Han, Danish Ali, Lana Z. Alagha, Aditya Kumar

Mining Engineering Faculty Research & Creative Works

The froth flotation process is extensively used for the selective separation of valuable base metal sulfides from uneconomic associated minerals. However, in this complex multiphase process, various parameters need to be optimized to ensure separation selectivity and peak performance. In this study, two machine learning (ML) models, artificial neural network (ANN) and random forests (RF), were used to predict the efficiency of in-house synthesized chitosan-polyacrylamide copolymers (C-PAMs) in the depression of iron sulfide minerals (i.e., pyrite) while valuable base metal sulfides (i.e., galena and chalcopyrite) were floated using nine flotation variables as inputs to the models. The prediction performance of …

Compliance Requirements For Eu Market- The Ce Marking, M G Sathyendra Mr.

Manipal Journal of Science and Technology

This article is a simple overview of the CE compliance process useful for startups and manufacturers. It covers the entire process and dos and don’ts while obtaining a CE mark.

Programmable And Modular Dc-Dc Converter, Joshua C. Hutchinson, Elijah M. Gordon

Electrical Engineering

This project considers the design, implementation, and testing of an open-source dc-dc converter for microgrid prototyping. Unlike conventional dc-dc converters that are proprietary and require specialist knowledge, and are usually designed for a single function, the proposed dc-dc converter will comprise of a programmable MCU and a Raspberry Pi (RPi) interface to allow less-skilled consumers to monitor and modify a power converting system. We will develop an open-source library that contains voltage control, current control, maximum power point tracking, and battery charge control profiles. Each library will be easy to implement through a GUI on the Raspberry Pi and will …

Tank Level Controller Plc Lab, Siddhi Upadhyaya, Teghvir Grewal

Electrical Engineering

The California Polytechnic State University San Luis Obispo’s Electrical Engineering Department is currently developing lab experiments for the new EE435 (Industrial Power Control and Automation) class. In order to support these efforts, fourth year Cal Poly students are expected to develop laboratory experiments that will be conducted during this new class for the semester system. The lab experiment focused on in this project is called the Tank Level Controller. This experiment will introduce EE 435 students to Schneider Electric Programmable Logic Controller (PLC) hardware and software, which is prominent in the automation industry.
This experiment will require students to develop …

Hvac Fan Cooling System Using Modicon M580, Ogbonnaya Okoronkwo Okorie, Nicolas Jens Fache

Electrical Engineering

A common problem that many devices have when operating is overheating. Whether it is operating at full capacity or idle, those devices that we use exert heat to some type of extent. The physical and electronic components of the device can only withstand so much heat before the component becomes damaged. This product provides a method of preventing overheating by being a cooling system for your device. A solution for preventing overheating of the components in these electronic devices is by having some sort of cooling system. Our product’s cooling system will be based on energy efficiency, which means that …

Current Source Dc-Dc Converter For Undersea Fiber Optic Sensors, Richard Anthony Esplana Kwan, John Charles Rodinec, Andrew Armstrong

Electrical Engineering

Today, there are nearly 400 cable networks spanning roughly 750,000 miles to connect our world together. With thousands of miles of cable already lying on the ocean floor, with thousands more to come, many have recognized a unique opportunity in using this cable infrastructure as an attachment point for sensors to help study and monitor the ocean. Placing sensors onto a submarine cable is not a simple task; the sensors will require power that they receive from a transmission cable, from a battery, or from the submarine cable itself. Unfortunately, the existing power feed configuration for submarine cables typically only …

Photophoretic Optical Trapping, Essa Ababseh

Electrical Engineering

Photophoretic Optical Trapping (POT) is a relatively new concept in the field of optics which has potential application in 3D display. The POT is realized by confining a particle within a very small location of the optical system, mostly around the focus. The particle, if captured by the beam, has the potential to print visible 3D images in free space. Our POT system is encapsulated by an acrylic enclosure, which also incorporates a biconvex lens as well as an adjustable focus laser module. Particles are released around the top of the lens’ focal point until the captured particle can be …

Cybersecurity In Industrial Automation Lab Design For Ee 435, Jules Khalil Emile Hajjar, Emily Zhou

Electrical Engineering

This project involves the creation of an instructional laboratory aimed at teaching cybersecurity for industrial automation applications. Specifically tailored for Electrical Engineering students at Cal Poly, the experiment focuses on configuring the Modicon M580, a PLC from Schneider Electric, and serves to introduce students to relevant cybersecurity protocols and techniques. This project will be implemented into the EE435 (Industrial Power Control and Automation) course curriculum upon Cal Poly’s transition to the semester system.

Industrial Automation And Controls Lab: Smart Led Dimmer Control, Trevor J. Beck

Electrical Engineering

Programmable Logic Controllers (PLCs) are rugged industrial computers used extensively in many industries for automation and control. EE 435 is a course being developed to introduce students to PLCs. This project will focus on one section of the course, with the primary objective being to control the brightness of an LED based on input received from an ambient light sensor. The control logic will use a PLC with analog input and output modules to interface with the sensor and actuator hardware. The light sensor will output 4-20mA proportional to the intensity of visible light, measured in lumens. The analog input …

Battery Hardware Simulator, Kian N. Orang, Marcelo Garcia

Electrical Engineering

This project aims to develop a battery hardware simulator, which will serve as a tool for studying microgrids. The primary objective is to create a simulation system that can emulate various battery technologies that are used in microgrids, including lithium-ion and lead acid. By utilizing this battery simulator, Cal Poly students can safely test battery management systems and battery-sensitive electronics without the inherent risks associated with real batteries. Our project implemented this design with a 4-quadrant programmable power supply (ITECH) connected to an AP Systems grid tied inverter. The power supply acts as the battery which can receive or supply …

Development Of Multiple Input Single Output Dc-Dc Converter, Ryan Bailey, Miguel Carmona, Jose Velez-Lopez

Electrical Engineering

This senior project report details the testing and validation of the designed DC-DC Multiple Input Single Output converter. The MISO uses four-switch buck-boost topology to output a single 48V from multiple nominal 24V inputs. The previous iteration of the MISO was plagued with an overheating mosfet that would drastically reduce the lifespan of the boards and reduce efficiency. This newest iteration includes more ground panes to combat the issues. In addition, the 200W MISO board was redesigned to utilize an edge connector for secure installment, removal, and replacement in the actual DC House system panel. The slots also have a …

Smart Table Top, Conner Sima, Nathan R. Jaggers, Jacob Barnes

Electrical Engineering

Dungeons and Dragons 5th Edition (D&D) is a tabletop role playing game (TTRPG) with complicated mechanics and a seemingly overwhelming amount of information. D&D players are often looking for ways to more effectively track information and products that enhance their game experience. One such product is a custom miniature; players use these to track their character’s location and for the enjoyment of creating a physical representation of their imagination. Virtual Tabletops (VTT’s) were developed to make the entire experience digital. The digital nature of VTT’s make all of the game’s rules and mechanics accessible at the click of the mouse; …

Wireless Energy Harvesting System, Matthew Palma, Audrey Toop, Andrew Fahey

Electrical Engineering

The modern world is built upon wireless transmission of data. The signals that carry this data travel through the air, an untapped source of power. Unreceived transmissions are dissipated into useless forms of energy when they should be reclaimed. Wireless electronics can theoretically be powered by harvesting energy from the electromagnetic signals in the wireless internet frequency band. The aim of this project is to develop a system to capture ambient energy, convert it into DC power, and store the power for later use. The product will consist of three subsystems: an antenna receiver, a rectifier and voltage-multiplier, and a …

Sky Survey Radio Telescope, Jack E. Mcguigan

Electrical Engineering

This document outlines the design of a radio telescope designed to perform hydrogen line sky surveys. The telescope produces radio images mapping the intensity and relative velocities of hydrogen concentrations to their sky coordinates. Over the course of a day, the telescope images the regions of space visible to it, allowing sky survey imagery to be updated daily. Sky survey images are comprised of an array of pixels corresponding to specific sky coordinates. Each 8-bit RGB pixel contains information on the concentrations of hydrogen in the brightness and relative velocity in the color. Radio images mapping the concentrations and velocities …

Spice Modeling Of Biosensing Field-Effect Transistor, Alex Castro

Electrical Engineering

This project created a user manual on how to generate an easily configurable and implementable Spice model for Field Effect Transistor (FET) devices created in the Cal Poly clean room. The document contained step by step procedures depicting the proper execution techniques and example results for different experiments required to gather the proper information for these models. This testing methodology was shown for finding the numerous different device parameters of a FET, including the I-V curves, threshold voltage, and subthreshold current values. The manual then described how to transfer this data into a new Spice model to allow for simulation …

Reaction Wheel Based Rocket Active Spin Stabilization, Tanuj Vemuri

Electrical Engineering

Cal Poly Space Systems is the high-powered and experimental rocketry club at Cal Poly SLO. They aim to design, test, and launch fully integrated launch vehicles. In order to create efficient and reliable vehicles, stabilization systems must be implemented. One parameter that can be actively stabilized is the vehicle’s roll. The roll of the vehicle can have noticeably effects on vehicle performance, as uncontrolled roll leads to decreased system stability in flight. Un-controlled roll can also have negative impacts on the quality of onboard video, which is used for post-flight analysis and marketing.

Reaction wheels are a popular method for …

Directional Speaker, Gabriel Tramontina Ceribelli, Vincent Trevor Pierce

Electrical Engineering

Parametric Acoustic Arrays (PAA) are highly directional soundwaves whose attenuation and spread are much less affected by distance from the source as compared to traditional speakers. A well-known application for PAA is the directional speaker. Studies show that noise directly affects health and decreasing noise pollution can help improve the quality of life for millions of people. Directional speakers can revolutionize society by coupling space with sound. This project encodes audio into two RF-Pulse Width Modulated (PWM) waves to drive a transducer array. Each RF-PWM wave interferes with the other in air to generate a Single Sideband (SSB) frequency spectrum …

Bearing Health Detector, Natalie N. Tokhmakhian, Alexander J. Davis

Electrical Engineering

Bearings, a common component in rotating machinery, are essential components of modern rotating machines; thus, monitoring their health is crucial when reducing downtime and boosting production efficiency. The Bearing Health Detector (BHD), a hand-held device, captures and processes the sound of a machine under test in real time and estimates the level of wear and tear by comparing the sound to previous tests. The BHD encompasses audiences involved with roller bearings in rotating machinery and is designed to provide the diagnosis of wear through the universal detection of good, satisfactory, and very poor with the following color scheme: green, yellow, …

Multi-Effects Analog Guitar Pedal, Carson J. Bryan

Electrical Engineering

The Multi-FX Analog Guitar Pedal includes the analysis, design, performance, PCB layout, and packaging of an industry-standard effects pedal for an electric guitar. This project takes an analog input signal and utilizes analog circuitry to give the user the option to customize the way that their playing sounds. Effects include the options to add equalization filtering and distortion. The EQ filtering will allow the user to attenuate or gain certain frequencies divided into the 3 standard audio bands: bass (20-300 Hz), middle (300-4000 Hz), and treble (4-20 kHz). The soft-clipping distortion stage will allow the user to move around the …

Developments In Construction Workers’ Compensation Insurance With The Use Of Biometrics, Kobe Tooch

Construction Management

Construction insurance, especially that of workers’ compensation, is vital for the protection of general contractors, but it comes at a high cost and limits their control over contract terms. Biometric devices, such as heart rate monitors and motion capture, have the potential to revolutionize the industry by reducing construction insurance premiums. Heart rate monitors can provide real-time data on workers' physical activity and health, while motion capture analyzes movements to identify unsafe movement patterns performed by workers. By monitoring workers' biometrics, construction companies can ensure their safety, prevent hazards, and implement targeted training programs. This personalized data can lead to …

Hydrogen-Bonding Trends In A Bithiophene With 3- And/Or 4-Pyridyl Substituents, Alison M. Costello, Rebekah Duke, Stephanie Sorensen, Nadeesha Kothalawala, Moses Ogbaje, Nandini Sarkar, Doo Young Kim, Chad Risko, Sean Parkin, Aron J. Huckaba

UK CARES Faculty Publications

To improve the charge-carrier transport capabilities of thin-film organic materials, the intermolecular electronic couplings in the material should be maximized. Decreasing intermolecular distance while maintaining proper orbital overlap in highly conjugated aromatic molecules has so far been a successful way to increase electronic coupling. We attempted to decrease the intermolecular distance in this study by synthesizing cocrystals of simple benzoic acid coformers and dipyridyl-2,2′- bithiophene molecules to understand how the coformer identity and pyridine N atom placement affected solid-state properties. We found that with the 5-(3-pyridyl)-5′-(4-pyridyl)-isomer, the 4- pyridyl ring interacted with electrophiles and protons more strongly. Synthesized cocrystal powders …

A Low Cost Iot-Based Arabic License Plate Recognition Model For Smart Parking Systems, Mohammad Mahmoud Abdellatif, Noura Hany Elshabasy, Ahmed Emam Elashmawy, Mohamed Abdelraheem

Electrical Engineering

License Plate Recognition is one of the significant enablers that can be utilized in wide range of applications in ITS and smart cities. The proposed design relies on three image processing stages to achieve license plate identification with high accuracy which are pre-processing, segmentation, and character recognition. The canny edge detection method with various thresholds, contour detection, and masking techniques are used to locate the car edges and license plate. In the experiment presented in this paper, 200 images were used to identify Egyptian car plates. The model successfully identified Arabic license plates with 93% accuracy. A prototype is implemented …

Embodied Energy And Carbon Footprint Of Concrete Compared To Other Construction Materials, Hector Estrada, Luke Lee

All Faculty Articles - School of Engineering and Computer Science

The main objective of infrastructure design codes is to protect the public’s welfare, health, and safety, none of which appear directly related to the current sustainability movement that has focused on protecting the natural environment, conserving resources, and minimizing the toxicity of construction materials and processes. Some United States jurisdictions have adopted language related to sustainability based on the United States Green Building Council to curtail adverse effects of global climate change, minimize environmental impact of new construction of built assets (i.e., buildings and infrastructure), and in some cases, improve air quality in the community. The focus of this paper …

Evaluation Of Metaverse Traffic Safety Implementations Using Fuzzy Einstein Based Logarithmic Methodology Of Additive Weights And Topsis Method, Muhammet Deveci, Dragan Pamucar, Ilgin Gokasar, Mario Köppen, Brij B. Gupta, Tugrul Daim

Engineering and Technology Management Faculty Publications and Presentations

As the Metaverse’s popularity grows, its effect on everyday problems is beginning to be discussed. The upcoming Metaverse world will influence the transportation system as cross-border lines blur due to rapid globalization. The purpose of this paper is to investigate the capabilities of the Metaverse and its alternatives to traffic safety, as well as to prioritize its advantages. The case study is based on a densely populated metropolis with an extensive education system. The city’s decision-makers will have to weigh the pros and cons of the Metaverse’s effect on traffic safety. To illustrate the complex forces that drive the decision-making …

Drop Test Release Mechanism, Sophie M. Getty, Matthew A. Tichenor, Nash W. Levy, Connor D. Dilloughery

Mechanical Engineering

Many boxes for shipping undergo drop tests by the manufacturer to ensure their durability. Certain constraints are necessary to successfully carry out these tests such as not damaging the box prior to the drop and maintaining consistency throughout every drop.

Our team has designed a Drop Test Release Mechanism that addresses these constraints. It provides repetitive drops for different objects that vary in shape and size such as small electronics or parts. This device utilizes a soft-clamping mechanism that can release an object with minimal force applied onto it prior to drop. A frame made of 80/20 was designed to …

Animatronic Monarch Butterfly: Mechanical System, Janine Rae Moreno, Enrico Cruz, Alexia Murphy, Lakshmanan Muthukaruppan

Mechanical Engineering

This report describes the design, manufacturing, and design verification of an interactive animatronic monarch butterfly created by a team of mechanical and computer engineering students for the Girl Scouts of California's Central Coast. The purpose of the project is to engage Girl Scouts in learning about monarch butterflies and provide hands-on experience in robotics and STEM. The report covers design changes, manufacturing processes, and assembly of various components, including the butterfly body, wings, legs, and electronic housing. The software and electronics used in the project are also briefly discussed, as the computer engineering team was responsible for the software and …

Cooled Liquid Rocket Thrust Chamber, Benjamin Gibson, Kealan Frederick Harris, Ryan Frank Schackel, Bjorn Thorsen

Mechanical Engineering

Cooling may affect the thrust output of a small-scale rocket. Little research is published about small-scale rocket performance. We hypothesize the thrust produced varies as the amount of cooling varies. To facilitate assessing this hypothesis, we have designed and built a liquid rocket engine rated for at approximately 25 lb_f of thrust. Our objective was to build in parallel with Cal Poly Space Systems, who built a rocket engine with similar specifications except without cooling. Our challenge is to integrate film cooling, so that the effects of cooling may be compared to Cal Poly Space System’s engine which has …

Thermoacoustic Refrigerator, Rees Phillip Verleur, Colleen Farrell Mccandless, Anders Matthew Bjork, Yashraj Ashwinkumar Solanki

Mechanical Engineering

In the Thermoacoustic Refrigerator Cal Poly Mechanical Engineering senior project, we designed, built, and tested a thermoacoustic refrigeration system which achieved an average temperature difference of 11.0°C. Our system consists of a resonator tube with an instrumented stack, mounted onto a base with a speaker and amplifier. An external power supply and function generator provide the power and signal to the system, and a thermocouple reader displays the temperature of the top and bottom of the stack. The system consistently achieved a significant temperature difference between the two ends of the stack in various ambient conditions, and it was quick …

Rilem Tc 266-Mrp: Round-Robin Rheological Tests On High Performance Mortar And Concrete With Adapted Rheology—A Comprehensive Flow Curve Analysis, Dimitri Feys, Helena Keller, Khadija El Cheikh, Egor Secrieru, Yannick Vanhove

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A comprehensive testing program was carried out to compare the rheological properties of flowable concrete that can be obtained from different rheometers. The results obtained from seven rheometers using vane or similar geometries are discussed. A comprehensive flow curve analysis is undertaken for further comparison of the various rheometers. Partially, large differences could be observed between the results obtained from the different rheometers. However, the device-specific trendlines are shown to have significant correlations with the overall baseline. Two potential causes of differences between results are highlighted: imposition/registration of torque/rotational velocity and discrepancies between the measured material flow behavior in the …