Engineering Commons^™

An Efficient Optimal Solution Method For Neutrosophic Transport Models: Analysis, Improvements, And Examples, Maissam Jdid, Florentin Smarandache

Neutrosophic Systems with Applications

Transport issues aim to determine the number of units that will be transferred from the production centers to consumption areas so that the cost of transportation is as low as possible, taking into account the conditions of supply and demand. Due to the great importance of these issues and to obtain more accurate results that take into account all circumstances, we conducted two research studies. In the first research, we presented a formulation of neutrosophic transport issues, and in the second research, we presented some ways to find a preliminary solution to these issues, but we do not know whether …

Traffic Monitoring System, Elizabeth Suda

Honors Projects

The Traffic Monitoring System (TMS) was implemented at the Bowling Green Flight Center as a pre-planning traffic volume tool for flight instructors to utilize when deciding on a safe location for a training event. The TMS allows the instructor to pre-determine a location during the preflight planning stage that provides the best traffic separation, rather than finding out once airborne that an designated flight training area is overcrowded leading to greater collision hazards. The Traffic Management System has provided Bowling Green Flight Center pilots and instructors with greater situational awareness of traffic and increased safety margins in flight training.

Imerys: Tube Mill Optimization Project, Ryan Waltman, Dalton Beasley, Dyson Beasley, Tristan Mcmichael

Senior Design Project For Engineers

The Tube Mill Optimization Project is in partnership with Imerys for Tube Mill 81 at their Marble Hill site in Georgia. Tube Mill 81 is a dry ball mill that operates 24/7 and makes an intermediary product for Plant 3. Tube Mill 81 needs quality improvement and a production rate increase to meet demand. Imerys’s quality specification is between a particle size of 12-18 microns and an acceptable production rate of 5 tons per hour. This project focuses on the development and implementation of three solutions: increase the amps on the separator to increase production, replace missing classifier blades in …

Microwave-Photonic Vernier Effect Enabled High-Sensitivity Fiber Bragg Grating Sensors For Point-Wise And Quasi-Distributed Sensing, Chen Zhu, Osamah Alsalman, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

This paper reports a sensitivity-improved fiber Bragg grating (FBG) sensor system based on microwave-photonic interferometry and the Vernier effect. an incoherent microwave photonics system based on a broadband light source is employed to interrogate the FBG sensor using the wavelength-to-delay mapping technique combined with interferometry. Specifically, the sensing FBG together with a reference FBG is used to construct a microwave photonics Michelson interferometer (MI). Changes in the Bragg wavelength of the sensing FBG subject to external perturbations are encoded into the spectral shifts of the microwave interferogram of the MI. a virtual interferometer is then generated from the sensing MI …

An Efficient Optimal Solution Method For Neutrosophic Transport Models: Analysis, Improvements, And Examples, Maissam Jdid, Florentin Smarandache

Neutrosophic Systems with Applications

Transport issues aim to determine the number of units that will be transferred from the production centers to consumption areas so that the cost of transportation is as low as possible, taking into account the conditions of supply and demand. Due to the great importance of these issues and to obtain more accurate results that take into account all circumstances, we conducted two research studies. In the first research, we presented a formulation of neutrosophic transport issues, and in the second research, we presented some ways to find a preliminary solution to these issues, but we do not know whether …

The Influence Of Aviation Technology On Human Complacency, Aurora Burton

Honors Theses

The thesis covers automation complacency in the aviation industry. The purpose being to provide a foundation of complacency-related accidents to support or dismiss the Federal Aviation Administration’s claim to automation-induced inattention. Complacency factors are outlined in a multitude of fields, creating a background for aviation discussion. To outline the parameters of literature review, behaviors associated with complacency are addressed. Next, a compilation of accident reports is examined and categorized. Specific, impactful accidents relating to complacency are detailed and explained. Summarily, three solutions to human-driven complacency are proposed, evaluated, and analyzed. Including the following: proficiency advancement, technology improvement, and change in …

Bridge Deck Surface Damage Assessment Using Point Cloud Data, Issa Al Shaini, Adriana Trias Blanco

Henry M. Rowan College of Engineering Departmental Research

Bridge deck condition assessments are typically conducted through visual inspections and by incorporating traditional contact sensors for Non-Destructive Evaluation techniques such as hammer sounding and chain dragging, which require the keen expertise of trained inspectors. The accuracy of these inspections is proportional to the level of deterioration of the bridge deck, as the ability of the inspectors is correlated to the apparent level of damage. This study aims to improve the accuracy of bridge deck inspection processes by utilizing non-destructive evaluation techniques, including analyzing point cloud data gathered via Light Detection and Ranging (LiDAR) as a geometry-capturing tool for identifying …

Modification Strategies For Development Of 2d Material-Based Electrocatalysts For Alcohol Oxidation Reaction, Haichang Fu, Zhangxin Chen, Xiaohe Chen, Fan Jing, Hua Yu, Dan Chen, Binbin Yu, Yun Hang Hu, Yanxian Jin

Michigan Tech Publications

2D materials, such as graphene, MXenes (metal carbides and nitrides), graphdiyne (GDY), layered double hydroxides, and black phosphorus, are widely used as electrocatalyst supports for alcohol oxidation reactions (AORs) owing to their large surface area and unique 2D charge transport channels. Furthermore, the development of highly efficient electrocatalysts for AORs via tuning the structure of 2D support materials has recently become a hot area. This article provides a critical review on modification strategies to develop 2D material-based electrocatalysts for AOR. First, the principles and influencing factors of electrocatalytic oxidation of alcohols (such as methanol and ethanol) are introduced. Second, surface …

Modification Strategies For Development Of 2d Material-Based Electrocatalysts For Alcohol Oxidation Reaction, Haichang Fu, Zhangxin Chen, Xiaohe Chen, Fan Jing, Hua Yu, Dan Chen, Binbin Yu, Yun Hang Hu, Yanxian Jin

Michigan Tech Publications

2D materials, such as graphene, MXenes (metal carbides and nitrides), graphdiyne (GDY), layered double hydroxides, and black phosphorus, are widely used as electrocatalyst supports for alcohol oxidation reactions (AORs) owing to their large surface area and unique 2D charge transport channels. Furthermore, the development of highly efficient electrocatalysts for AORs via tuning the structure of 2D support materials has recently become a hot area. This article provides a critical review on modification strategies to develop 2D material-based electrocatalysts for AOR. First, the principles and influencing factors of electrocatalytic oxidation of alcohols (such as methanol and ethanol) are introduced. Second, surface …

Design And Implementation Of A Software System For Measuring Cookstove Emissions In Peru, Cody Arvonen

Undergraduate Honors Theses

The particulate matter (PM), carbon monoxide (CO), and carbon dioxide (CO₂) emitted from cookstoves cause many potential health and environmental risks. This work outlines the design of a sensor system to accurately and affordably measure these gas quantities to aid in the certification of cookstoves for a laboratory in Peru. Our team was able to design and build this system at a price ten times reduced than the current commercial sensor unit in use. The performance of our sensor system was verified by comparing its PM and CO trends to that of the commercial unit. After testing, we …

Evaluation Of Polyvinyl Alcohol (Pva) For Electrospinning Utility In The Blood Vessel Mimic (Bvm) Lab, Logan Vandenbroucke

Master's Theses

Electrospinning has provided the opportunity to create extracellular matrix (ECM) mimicking scaffolds for the development of tissue-engineered constructs. Within Professor Kristen Cardinal’s Blood Vessel Mimic (BVM) Lab, at Cal Poly, there exists a constant demand for innovation and the expansion of polymer types and electrospinning capabilities for its BVM model. Along these lines, the BVM Lab has recently acquired two new electrospinning systems: the Spinbox, a commercially graded electrospinning system, and the Learn-By-Doing system, which was part of a recently completed thesis conducted by Jason Provol. Additionally, recently published literature has demonstrated polyvinyl alcohol (PVA) as a viable option for …

Effects Of Beet Supplements On Cardiovascular Response Using A Noninvasive Blood Pressure Cuff, Nicholas M. Hughes

Master's Theses

A Calibrated Cuff Plethysmography device was built, tested for verification, and used to experiment on human subjects to measure the cardiovascular response of consuming a beet supplement, specifically looking at arterial compliance and pressure-area curves. Each subject was tested four times. A baseline was measured under normal conditions and after five-minute hyperemia conditions. 10 subjects were given 6 ounces of water mixed with either purple Kool-Aid (control), a SuperBeets supplement, or a SuperBeets Sport supplement and after 45 minutes, measurements were taken undergoing normal and hyperemia conditions once more. The verification testing demonstrated the calibration of the device was effectively …

Cybersecurity In Critical Infrastructure Systems: Emulated Protection Relay, Mitchell Bylak

Computer Science and Computer Engineering Undergraduate Honors Theses

Cyber-attacks on Critical Systems Infrastructure have been steadily increasing across the world as the capabilities of and reliance on technology have grown throughout the 21st century, and despite the influx of new cybersecurity practices and technologies, the industry faces challenges in its cooperation between the government that regulates law practices and the private sector that owns and operates critical infrastructure and security, which has directly led to an absence of eas- ily accessible information and learning resources on cybersecurity for use in public environments and educational settings. This honors research thesis addresses these challenges by submitting the development of an …

Automation Complacency On Humans And Cyber-Physical Systems In The Energy Sector, Shannon Olaveson

Cyber Operations and Resilience Program Graduate Projects

Cyber-physical systems (CPS) and the Industrial Internet of Things (IoT) enable industrial systems and technology to work together to achieve increased connectivity and operational efficiency through the use of automation. Because automation requires less human interaction to run industrial tasks, a reliance may form on this integration to take over an otherwise manual process. This reliance can cause human behavior to affect operational safety and security, leading to unintentional outcomes or vulnerable areas of adversarial opportunity. The energy sector is one of the most critical infrastructure areas becoming a part of the rise to automation, resourcing gas, oil, and electricity …

Truck Platooning Reshapes Greenhouse Gas Emissions Of The Integrated Vehicle-Road Infrastructure System, Huailei Cheng, Yuhong Wang, Dan Chong, Chao Xia, Lijun Sun, Jenny Liu, Kun Gao, Ruikang Yang, Tian Jin

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Reducing greenhouse gas emissions has turned into a pillar of climate change mitigation. Truck platooning is proposed as a strategy to lower emissions from vehicles on roads. However, the potential interactive impacts of this technology on road infrastructure emissions remain unclear. Here, we evaluate the decarbonization effects of truck platooning on the integrated vehicle-road system at a large-scale road network level, spanning 1457 road sections across North America. We show that truck platooning decreases emissions induced by truck operations, but it degrades faster the durability of road infrastructure and leads to a 27.9% rise in road emissions due to more …

Ionically Crosslinked Cellulose Nanocrystals By Metal Nitrates For The Preparation Of Stable Emulsions With Tunable Interface Properties, Joseph Batta-Mpouma, Gurshagan Kandhola, Jin-Woo Kim

Materials Science and Engineering Faculty Publications and Presentations

Biologically extracted cellulose nanocrystals (CNCs) are rod-like and amphiphilic materials with surface-exposed (hydrophilic sites) and hidden (hydrophobic sites) hydroxyl groups. These physicochemical characteristics make CNCs suitable for use as emulsifying agents to stabilize emulsions. Stable oil-in-water emulsions, using sulfated (i.e., – SO₃−) CNCs that were ionically crosslinked with alkaline-earth (i.e., Mg ²⁺) or transition-d-block (i.e., Zn ²⁺) metal cations, were developed without the use of any synthetic surfactants or prior functionalization of pure CNCs with hydrophobic molecules. Various emulsion surface properties such as interfacial tension, surface charge, surface chemistry, as well as rheology were characterized. Ionically …

Enhancing Rubber (Hevea Brasiliensis) Seed Shell Biochar Through Acid-Base Modification For Effective Phenol Removal From Aqueous Environments, Oyinlola R. Obanla, Jamie A. Hestekin, Modupe E. Ojewumi, Imen Bousrih, Modupeoluwa C. Fawole

Chemical Engineering Faculty Publications and Presentations

This work encompasses using acid-base modified rubber seed shell biochar (RSSB) as an adsorption approach to eradicate phenol from aqueous mediums. Potassium hydroxide (KOH) was used pre-pyrolysis to modify the RSS, and hydrochloric acid (HCl) was used post-pyrolysis to modify the RSSB. The methodology was divided into three stages: RSS pretreatment, RSS base-modification and pyrolysis, and RSSB acid-modification and processing. Temperature, pH and several other factors were investigated for their impacts on the adsorbent, and optimal conditions were established at pH 6, 1.0 g of rubber seed shell biochar (RSSB), 50 mg/L initial concentration, 120 min contact time, and 30°C …

A Low-Power Analog Cell For Implementing Spiking Neural Networks In 65 Nm Cmos, John S. Venker, Luke Vincent, Jeff Dix

Computer Science and Computer Engineering Faculty Publications and Presentations

A Spiking Neural Network (SNN) is realized within a 65 nm CMOS process to demonstrate the feasibility of its constituent cells. Analog hardware neural networks have shown improved energy efficiency in edge computing for real-time-inference applications, such as speech recognition. The proposed network uses a leaky integrate and fire neuron scheme for computation, interleaved with a Spike Timing Dependent Plasticity (STDP) circuit for implementing synaptic-like weights. The low-power, asynchronous analog neurons and synapses are tailored for the VLSI environment needed to effectively make use of hardware SSN systems. To demonstrate functionality, a feedforward Spiking Neural Network composed of two layers, …

Effectiveness Of The Different Eutectic Phase-Change Materials In Cooling Asphalt Pavement, Jiasheng Dai, Feng Ma, Zhen Fu, Jenny Liu, Chen Li, Yingjie Hou, Hanli Wu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Choosing a Phase-Change Material (PCM) Adapted to the Specific Phase-Change Temperature (Tm) Required for Each Temperature Condition is of Utmost Importance in Cooling Pavements. Eutectic Phase-Change Materials (EPCMs) Realize the Customization of the Desired Tm and Reduce the Difficulty of Matching PCMs. This Work Aims to Investigate the Effectiveness of a Group of Binary/ternary EPCMs with Tm Ranging from 30 to 60 ℃ and Melting Enthalpies of Around 200 J/g as Thermal Regulation Components for Different Asphalt. to Achieve This Goal, the Thermal and Rheological Properties of Phase-Change Asphalt Binders (PCAB) Were Evaluated by Differential Scanning Calorimeter, Thermogravimetric, Fourier Transform …

Pollutant Forecasting Using Neural Network-Based Temporal Models, Richard Pike

Masters Theses & Specialist Projects

The Jing-Jin-Ji region of China is a highly industrialized and populated area of the country. Its periodic high pollution and smog includes particles smaller than 2.5 μm, known as PM2.5, linked to many respiratory and cardiovascular illnesses. PM2.5 concentration around Jing-Jin-Ji has exceeded China’s urban air quality safety threshold for over 20% of all days in 2017 through 2020.

The quantity of ground weather stations that measure the concentrations of these pollutants, and their valuable data, is unfortunately small. By employing many machine learning strategies, many researchers have focused on interpolating finer spatial grids of PM2.5, or hindcasting PM2.5. However, …

An Exhaustive Review Of Neutrosophic Logic In Addressing Image Processing Issues, Samia Mandour

Neutrosophic Systems with Applications

Since the importance of images in our lives and the advancements in computer data gathering methods, anyone can collect a large number of images, but most of them cannot be processed manually. Image processing therefore becomes appealing since various types of data may be represented and processed digitally. Image processing has become the most popular processing method, employed in security camera films, healthcare images, images from remote sensors, and naturalistic image/videos because of fast computers and processors. In order to raise cognitive function and speed up decision-making, image processing is crucial to many information access systems. Since ambiguity now permeates …

An Integrated Neutrosophic Approach For The Urban Energy Internet Assessment Under Sustainability Dimensions, Walaa M. Sabry

Neutrosophic Systems with Applications

The urgent issue of climate change has resulted in an increasing preoccupation with the transition to low-carbon energy. The urban energy internet (UEI) enables the efficient utilization of renewable energy via the integration of contemporary energy grids, smart energy services, and cyber-physical systems. Consequently, the assessment of urban energy is vital for the construction of low-carbon cities. This study intends to provide an integrated decision-making approach for addressing assessment challenges related to UEI, with a focus on sustainability. The introduced approach adopts the opinions of three experts to express their opinions through semantic terms in evaluating sustainability factors and evaluating …

Optimization Of Hydraulic Cylinder Positioning For Wind Tower Hydraulic Erection System, Anbesh Rawal

Master's Theses

Wind produced electricity is a rapidly growing field with wind towers serving as critical components. Conventionally, special cranes are commonly used for wind tower erection. This study explores the use of hydraulic cylinders for small-scale wind tower erection. The thesis aims to find the optimal position of hydraulic cylinder connections in a hydraulic erection system for safe and energy-efficient tower erection and retraction and to enhance the performance and longevity of the system.

Structural analysis was conducted to investigate various hydraulic cylinder positioning configurations, ensuring minimal force exertion while maintaining structural integrity. The study included the selection of locally available …

Bioactivity And Structural Properties Of Hydroxyapatite On Ti6a|4v And Si(100) Surfaces By Pulsed Laser Deposition, Salizhan Kylchbekov

Masters Theses & Specialist Projects

Although biomedical implant technology is very advanced, there are still caveats in terms of biocompatibility properties because metals are inert to biological processes such as osseointegration, cell growth, and cell adhesion. This results in statistically significant complications and opens rooms for improvements. Among many techniques to improve this problem, coating the metal surface with biologically functional materials has resulted in the best performances. Hydroxyapatite (HAP), Ca_₁₀(PO_₄)_₆(OH)_₂, is the most stable form of calcium phosphates in human body environment and is functional in key processes such as ion exchange, osteoblast (bone cells) formation, …

Ethical Implications Of Ai-Based Algorithms In Recruiting Processes: A Study Of Civil Rights Violations Under Title Vii And The Americans With Disabilities Act, Vanessa Rodriguez

Cyber Operations and Resilience Program Graduate Projects

This research paper analyzes the ethical implications of utilizing artificial intelligence, specifically AI-based algorithms in business selection and recruiting processes, with a focus on potential violations under Title VII of the Civil Rights Act of 1964 and Title 1 of the Americans with Disabilities Act (ADA). Amazon’s attempt at launching AI recruiting tools is examined. This paper will assess the fairness of AI recruiting practices, considering data collection, potential biases, and accuracy concerns in its implementation process. Additionally, the paper will provide an overview of federal civil rights statutes enforced by the U.S. Equal Employment Opportunity Commission (EEOC) and recent …

Molecular Separation By Using Active And Passive Microfluidic Chip Designs: A Comprehensive Review, A. Ebrahimi, K. Icoz, R. Didarian, C.-H. Shih, A. Akpek, Berivan Cecen, Sabanci A. Bal-Ozturk, K. Güleç, Y.-C.E Li, S. Shih, B. Sirma Tarim, H.C. Tekin, E. Alarçin, H. Ghorbanpoor, C. Özel, A. Eker Sarıboyacı, Guzel F. Dogan, N. Bassous, S.R. Shin, H. Avci

Henry M. Rowan College of Engineering Departmental Research

Separation and identification of molecules and biomolecules such as nucleic acids, proteins, and polysaccharides from complex fluids are known to be important due to unmet needs in various applications. Generally, many different separation techniques, including chromatography, electrophoresis, and magnetophoresis, have been developed to identify the target molecules precisely. However, these techniques are expensive and time consuming. “Lab-on-a-chip” systems with low cost per device, quick analysis capabilities, and minimal sample consumption seem to be ideal candidates for separating particles, cells, blood samples, and molecules. From this perspective, different microfluidic-based techniques have been extensively developed in the past two decades to separate …

Combining Adhesive And Nonadhesive Injectable Hydrogels For Intervertebral Disc Repair In An Ovine Discectomy Model., Christopher J Panebianco, Caroline Constant, Andrea J. Vernengo, Dirk Nehrbass, Dominic Gehweiler, Tyler J Distefano, Jesse Martin, David J Alpert, Saad B Chaudhary, Andrew C Hecht, Alan C Seifert, Steven B Nicoll, Sibylle Grad, Stephan Zeiter, James C Iatridis

Henry M. Rowan College of Engineering Departmental Research

BACKGROUND: Intervertebral disc (IVD) disorders (e.g., herniation) directly contribute to back pain, which is a leading cause of global disability. Next-generation treatments for IVD herniation need advanced preclinical testing to evaluate their ability to repair large defects, prevent reherniation, and limit progressive degeneration. This study tested whether experimental, injectable, and nonbioactive biomaterials could slow IVD degeneration in an ovine discectomy model.

METHODS: Ten skeletally mature sheep (4-5.5 years) experienced partial discectomy injury with cruciate-style annulus fibrosus (AF) defects and 0.1 g nucleus pulposus (NP) removal in the L1-L2, L2-L3, and L3-L4 lumbar IVDs. L4-L5 IVDs were Intact controls. IVD injury …

Rheological And Mechanical Properties Of Kenaf And Jute Fiber-Reinforced Cement Composites, Seongwoo Gwon, Seong Ho Han, Thanh Duc Vu, Chanyoung Kim, Myoungsu Shin

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigated the rheological and mechanical properties of cement composites with kenaf and jute fibers for use in shotcrete. The length and volume fractions of the fiber were varied; the rheological properties were analyzed in terms of air content, compression and flexural tests were conducted, and the degree of fiber dispersion was assessed using fluorescence microscopy. The rougher surfaces of the jute fibers led to a higher yield stress and viscosity of the composite compared to the kenaf fibers. The use of 10-mm-long jute fibers at 2.0% volume fraction led to optimal rheological properties while 30-mm-long jute fibers at …

Vertical Free-Swinging Photovoltaic Racking Energy Modeling: A Novel Approach To Agrivoltaics, Koami Soulemane Hayibo, Joshua M. Pearce

Electrical and Computer Engineering Publications

To enable lower-cost building materials, a free-swinging bifacial vertical solar photovoltaic (PV) rack has been proposed, which complies with Canadian building codes and is the lowest capital-cost agrivoltaics rack. The wind force applied to the free-swinging PV, however, causes it to have varying tilt angles depending on the wind speed and direction. No energy performance model accurately describes such a system. To provide a simulation model for the free-swinging PV, where wind speed and direction govern the array tilt angle, this study builds upon the open-source System Advisor Model (SAM) using Python. After the SAM python model is validated, a …

Recycled Polycarbonate And Polycarbonate/Acrylonitrile Butadiene Styrene Feedstocks For Circular Economy Product Applications With Fused Granular Fabrication-Based Additive Manufacturing, Alessia Romani, Marinella Levi, Joshua M. Pearce

Electrical and Computer Engineering Publications

Distributed recycling and additive manufacturing (DRAM) holds enormous promise for enabling a circular economy. Most DRAM studies have focused on single thermoplastic waste stream. This study takes three paths forward from the previous literature: 1) expanding DRAM into high-performance polycarbonate/ acrylonitrile butadiene styrene (PC/ABS) blends, 2) extending PC/ABS blend research into both recycled materials and into direct fused granular fabrication (FGF) 3-D printing and 3) demonstrating the potential of using recycled PC/ABS feedstocks for new applications in circular economy contexts. A commercial open source large-format FGF 3-D printer was modified and used to assess the different printability and accuracy of …