Engineering Commons^™

Teaching With Jupyter In-Class Activities: Lessons Learned And Next Steps, David Anastasiu

Faculty Publications

No abstract provided.

Meso-Scale Simulation Of Size-Dependent Shear Behavior In Glass Fiber Reinforced Polymer Reinforced Concrete Beams Without Stirrups, Sina Khodaie

Theses and Dissertations

There is extensive experimental evidence of the decrease in the shear stress at failure at increasing effective depths in concrete beams reinforced with glass fiberreinforced polymer (GFRP) bars without shear reinforcement. An important practical implication is that extrapolating strength values from typical laboratory-scaled experiments to design larger members may be misleading. The complexity of the underlying mechanics is reflected in the difficulty of using commercially available numerical tools to accurately estimate shear strength irrespective of beam size. This dissertation presents research on a Lattice Discrete Particle Model (LDPM) based model to simulate the response of scaled slender GFRP reinforced concrete …

Enhancements In Alginate Microencapsulation Technology & Impacts On Cell Therapy Development, Marwa Belhaj

Theses and Dissertations

Biodegradable alginate microcapsules (MC) are recently becoming widely used in the biomedical field, and have shown effectiveness as a drug delivery system. Alginate has been used in microencapsulation due to its simple gelling process, biodegradability, excellent biocompatibility, and its stability under in-vivo conditions. Alginate polymer is a natural polysaccharide derived from brown seaweed and has the ability to polymerize rapidly in the presence of cations to form a porous matrix. In order to advance the previous system for efficient protein and peptide delivery, we further lyophilized the peptide-filled microcapsules and we were able to rehydrate, and test them for sustained …

Photovoltaic Inverter Control To Sustain High Quality Of Service, Yan Chen

Theses and Dissertations

The increasing penetration of distributed solar photovoltaic (PV) generation presents both challenges and opportunities for distribution systems. The intermittent nature of solar irradiance may lead to power quality degradation. At the same time, PV inverters –if properly designed and operated– can be used to improve power quality. The goal of this dissertation is to develop power flow optimization methods for power distribution networks with high penetration of PV generation. The approaches proposed in this dissertation have been tested using the modified version of the IEEE 34-node distribution system and the IEEE 123-node distribution system, as well as the validated model …

Matrix Stiffness Modulates Mesenchymal Stem Cell Sensitivity To Geometric Asymmetry Signals, Maria Eugenia Piroli

Theses and Dissertations

Human stem cells hold significant potential for the treatment of various diseases. However, their use as a therapy is hampered by the limited understanding of the mechanisms by which stem cells respond to environmental stimuli. Efforts to understand extracellular biophysical cues have demonstrated the critical roles of geometric and mechanical signals in determining the fate of stem cells. The goal of this study was to explore the interplay between cell polarity and matrix stiffness in stem cell lineage specification. We hypothesize that confining cells to asymmetric extracellular matrix (ECM) islands will impart polarity at a single-cell level and result in …

Quantifying Time Retarded Electromagnetic Fields And Their Applications In Transmission Lines, Brandon Thomas Gore

Theses and Dissertations

Modern baseband signaling that facilitates the passing of information over high speed interconnects such as copper twin-ax cable and printed circuit boards supports single line data rates of 100 Gbps. Next generation bandwidth requirements of electrical links are approaching frequencies up to 50 GHz. Yet, signal integrity engineers that analyze these interconnects rely on models with underlying assumptions and limited extensions beyond those proposed in the 19th century to describe per unit length characteristics of Resistance, Inductance, Conductance, and Capacitance (RLGC) for transatlantic telegraph cable. An excluded phenomenon is the time retarded behavior of electromagnetic fields. The aim of this …

Plants As Biofactories To Produce Mammalian Tumor Suppressor Micrornas, John Lachlan Macarthur

Theses and Dissertations

MicroRNAs (miRNAs) are small noncoding single stranded RNAs that are considered master regulators of gene expression. They are also an emerging class of therapeutic agents with significant potential for the prevention and treatment of many diseases, including cancer. Many different forms of cancer are associated with loss or reduced accumulation of one or more miRNAs that function as tumor suppressors. In animal models, restoration of missing tumor suppressor miRNAs prevents the initiation, progression and/or spread of the disease. However, the current absence of an efficient method for delivery of therapeutic miRNAs is a critical barrier to their use. The research …

Novel Wideband Ebg Structures For Isolation Improvement Between Cosite Antennas, Paul John Czeresko Iii

Theses and Dissertations

As the number of installed antennas increases on a structure, the available real estate to do so without each antenna interfering with the others diminishes. Electromagnetic band gap (EBG) structures are one way to mitigate this cosite interference with compact antenna installations. While a host of EBG structures and types (3-D, planar etc.) have been proposed and studied historically, it has been found that planar EBG structures tend to provide very narrow bandwidths for both antenna design and cosite interference reduction. This research focuses on the design of EBG structures intended to achieve greater than 20 dB of isolation improvement …

Stabilization Of Silicon And Germanium Based High Capacity Anodes For Lithium Ion Batteries, Kuber Mishra

Theses and Dissertations

Lithium-ion batteries (LIBs) have been the driver of the widespread application of portable electronics. As the electronic devices have been more powerful and versatile, the pressing demand for higher energy density batteries have led the extensive explorations of novel materials for high capacity electrodes. Despite several breakthroughs in literature, the current state of art LIBs still uses the battery chemistry developed in early 1990s.The keys challenges for switching to other high capacity electrodes have been high cost, non-linear scalability and poorer electrochemical performance. This dissertation focusses on development of high capacity electrodes in order to increase the energy density of …

Impact Of Critical Path Method (Cpm) Of Scheduling On On-Time Completion Of Transportation Projects, Fahim Ahmed

Theses and Dissertations

This study addresses the effectiveness of Critical Path Method (CPM) scheduling on project delivery. Specifically, the on-time completion of projects with and without a CPM schedule is explored. The paper uses data from 2,097 South Carolina transportation projects let after February 2008 and substantially completed by August 2015. The delay analysis uses the original contract completion date as well as the completion date adjusted by change orders. Chi-Squared tests are used to examine the relationship between CPM scheduled projects and delayed projects, and t-tests are used to compare the mean delay (in days) between CPM scheduled and unscheduled projects. The …

Structurally Integrated Reconfigurable Wideband Array For Conformal Applications, Michael Damon Wright

Theses and Dissertations

Structurally integrated conformal antennas offer significant advantages over traditional bolt on antennas, especially for air vehicle applications. The ability to leverage the entire structure allows for unconventionally large antennas and arrays to be implemented in a manner which does not detract from the aerodynamic, structural or aesthetic qualities of the vehicle. Works along this line have included Slotted Waveguide Antenna Stiffened Structures (SWASS), conformal helix and spiral antennas, Log Periodic Dipole Arrays (LPDA), and other antennas.

An area which has not been investigated to date is the possibility of implementing reconfigurable antennas in a structural environment. There are inherent challenges …

Modulation Of Amyloid-Β Aggregation Via Small Molecules And Glycine Zipper Alterations, Steven Zebulon Vance

Theses and Dissertations

Alzheimer’s disease (AD) is the most common form of neurodegenerative disease. Nationally, AD is the 6th leading cause of death and the only top 10 killer of Americans that cannot be slowed, cured, or prevented. AD is characterized by the deposition of extracellular plaques of aggregated amyloid-β protein (Aβ). Aβ originates from the amyloid precursor protein (APP), a transmembrane protein that is cleaved to form a short and inert protein fragment called Aβ. However, Aβ undergoes a nucleation process wherein aggregates from soluble oligomers to insoluble fibrils are formed. While uncertainty remains as to the exact mechanism, studies have associated …

Evaluation Of Sonocatalytic Degradation Of Ibuprofen And Sulfamethoxazole In The Presence Of Various Catalysts, Yasir Alhamadani

Theses and Dissertations

Over the last two decades, large quantities of products, such as medicines, disinfectants, and personal care products, have been released into surface waters and wastewater treatment facilities by the pharmaceutical and chemical industries which have come to the attention of scientists with regard to their impacts on life in lakes, rivers, and groundwater. Among various types of treatment processes, ultrasonic (US) treatment process was used in this study to investigate the effect catalysts and removal of selected pharmaceutical’s (PhACs) compounds (ibuprofen (IBP) and sulfamethoxazole (SMX)). Carbon nanomaterials (CNMs) have become candidates for numerous applications in nanocomposites, microelectric devices, sensors, energy …

Development Of Models And Solution Methods For Different Drayage Applications, Samaneh Shiri

Theses and Dissertations

In the last decades, intermodal freight transport is becoming more attractive in the global supply chains and freight transport policy makings. Intermodal freight transport provides a cost-effective, reliable, and efficient movement of freight by utilizing the strengths of different transport modes. The initial and final segment of intermodal freight transport, performed by truck, is known as “drayage.” The scheduling of truck movements in drayage operation within the service area of an intermodal terminal is an operational problem which leads to a truck scheduling problem that determines the efficient schedule of trucks while satisfying all transportation demands and constraints. Drayage accounts …

System Optimization And Material Development Of Solid Oxide Cells For Energy Conversion And Storage, Libin Lei

Theses and Dissertations

Solid oxide cells (SOCs) can convert chemical energy to electricity in the fuel cell mode and store electricity to chemicals in the electrolysis mode. However, there are still critical barriers, such as energy efficiency and durability, for the development and commercialization of SOCs. The objective of this dissertation is to apply system optimization and materials design to address the critical barriers for solid oxide cells in energy conversion and energy storage applications. One major focus of the dissertation is related to improve energy efficiency, enhance the cell performance and achieve multifunctionality in solid oxide electrolysis cells (SOECs). In addition, development …

Enhance Flow Boiling In Microchannels By Regulating Two-Phase Transport Patterns, Wenming Li

Theses and Dissertations

Flow boiling in microchannels is one of the most promising cooling techniques for microelectronics. Using latent heat by vaporization can significantly improve heat dissipation of high power density electronic devices. Most of the failure of electronic devices is induced by the occurrence of critical heat flux (CHF), which defines the maximum operating conditions. However, the vigorous rapid generation of vapor through phase change leads to chaotic two-phase flows in microchannels, resulting in flowinstability in terms of severe flow, temperature and pressure drop fluctuations. Particularly, the very well-known bubble confinement exacerbates the two-phase flow instabilities and greatly deteriorates heat transfer performance …

Study Of 4h-Sic And Alxga1-Xn Based Heterojunction Devices For Ultraviolet Detection Applications, Venkata Surya Naga Raju Chava

Theses and Dissertations

Ultraviolet (UV) detectors are important for their applications in flame detection, furnace gas control systems, plume monitoring etc. Due to their wide band-gap, 4H-SiC (Eg=3.26eV) and III-V semiconductors such as GaN (Eg=3.4eV), AlxGa1-xN (Eg=3.4eV to 6.2eV) etc., are excellent candidates for visible(��cut-0ff=400nm) and solar blind(��cut-0ff=290nm) UV detectors. Conventional SiC UV detectors suffer from poor UV responsivities due to reflection/absorption/transmission losses caused by the metal electrodes used in those detectors.

In the first part, a novel bipolar transistor with epitaxial graphene(EG)/p-SiC (30μm)/n+-SiC substrate was fabricated and characterized. The 2-3 ML thick, transparent and conducting, EG used in this work was grown …

Efficient Design Optimization Methodology For Nonconventional Laminated Thin-Walled Composite Structures, Mazen Albazzan

Theses and Dissertations

Structural designers seek the best possible design of a structure that optimally meets the requirements of a specific application. The measure of the quality of the final design can often be related to specific stiffness and strength of the structure. Because of their superior mechanical and environmental properties compared to traditional metals, fiberreinforced composite materials have earned a widespread acceptance for different structural applications. The tailoring potential of composites to achieve high specific stiffness and strength has promoted them as promising candidates for constructing lightweight structures. From that aspect, designers have tackled the problem of designing composite laminates, which is …

Multiscale Deformation And Failure Behavior Of Polymer Bonded Explosives Subjected To High Rate Loading, Suraj Muthiramalil Ravindran

Theses and Dissertations

Polymer bonded explosives (PBX) are heterogeneous granular composites with a high-volume fraction of solid. Typically, they contain 80-95% explosive crystals and 5- 20% soft polymer binder. These materials are subjected to different loading conditions during their service life. The main function of the soft binder is to reduce shock sensitivity to prevent an accidental explosion. However, there have been inadvertent detonations in these materials during transportation and handling. The reason for such unintentional explosion is not well understood. It is commonly accepted that the formation of local hightemperature regions, called ‘hot spots’, is the primary cause. Hotspot formation is associated …

Changes Of Dispersal Ability In An Isolated Population, Connor Bacon

Theses and Dissertations

Dispersal is a core mechanism in the maintenance of metapopulations. It maintains genetic diversity by connecting subpopulations and generates new populations to replace those that die out. However, as populations become more isolated, as occurs in habitat fragmentation, dispersal becomes more difficult. This should lead to selective pressure against dispersive individuals, causing a reduction in dispersal traits. Over time, this can lead to variation in dispersal traits among populations. We examine this idea using an extreme case of isolation in Euphydryas gillettii, a population that has remained completely isolated for forty years. By comparing this population to a baseline established …

Three-Way Catalysts In Passive Selective Catalytic Reduction Systems, Calvin Thomas

Theses and Dissertations

Conventional gasoline-powered engines operate with a stoichiometric air-fuel ratio (AFR), but greater fuel economy is achieved in lean burn engines by increasing the AFR. The primary drawback to these engines is the nitrogen oxide (NOX) emissions, which cannot be reduced over a conventional three-way catalyst (TWC). Passive selective catalytic reduction (SCR) is a promising approach for the control of NOX emissions in lean burn systems. By periodically decreasing the AFR to fuel-rich levels, ammonia (NH3) can be produced over a TWC and stored on a downstream SCR catalyst for the reduction of NOX during normal lean operation. While passive SCR …

Screening Of Novel Active Salicylic Acid Analogs And Identification Of A Bacterial Effector Targeting Key Proteins Involved In Salicylic Acid-Mediated Defense, Ian Palmer

Theses and Dissertations

The master regulator of salicylic acid (SA)-mediated plant defense, NPR1 (NONEXPRESSER OF PR GENES 1), and its paralogs NPR3 and NPR4 act as SA receptors. After the perception of a pathogen, plant cells produce SA in the chloroplast. In the presence of SA, NPR1 protein is reduced from oligomers to monomers, and translocated into the nucleus. There, NPR1 binds to TGA and WRKY transcription factors to induce expression of plant defense genes. EDS1 and PBS3 are two key proteins involved in SA biosynthesis. Previous research has shown that several plant pathogens produce SA hydroxylases. These pathogen-produced hydroxylases act to degrade …

High Temperature Compression Creep Of U3si2, Emil Angelo Cahanap Mercado

Theses and Dissertations

As a result of the Fukushima Daiichi Nuclear Disaster in 2011, a push for increasing the safety of nuclear power plants was made through research grants funded through the United States Department of Energy via the Accident Tolerant Fuels (ATF) campaign. One of the focuses of the campaign is improving the accident tolerance of nuclear fuel during a loss of coolant accident.

A promising set of being researched from the ATF is Silicon Carbide (SiC) composite cladding and Uranium Silicide (U3Si2) fuel pellets. Under high temperatures, stresses, and times the creep deformation can play an important factor in pellet to …

Physics-Based Approaches For Structural Health Monitoring And Nondestructive Evaluation With Ultrasonic Guided Waves, Md Yeasin Bhuiyan

Theses and Dissertations

The engineering infrastructures have a growing demand for damage monitoring systems to avoid any potential risk of failure. Proper damage monitoring solutions are of a great interest to this growing demand. The structural health monitoring (SHM) and nondestructive evaluation (NDE) offer appropriate online and offline damage monitoring solutions for a variety of mechanical and civil infrastructures that includes unmanned aerial vehicles (UAV), spaceships, commercial aircraft, ground transportation, wind turbines, nuclear spent fuel storage tanks, bridges, naval ships, and submarines. The fundamentals of the ultrasonic SHM and NDE consist of multi-disciplinary fields. The dissertation addresses SHM and NDE using ultrasonic guided …

Understanding Early Amyloid-Ss Aggregation To Engineer Polyacid-Functionalized Nanoparticles As An Inhibitor Design Platform, Nicholas Vander Munnik

Theses and Dissertations

Alzheimer’s disease (AD) is characterized by the presence of amyloid-ß (Aß) protein aggregates in the brains of those afflicted. This protein aggregates via a complex pathway to progress from monomers to soluble oligomers and ultimately insoluble fibrils. Due to the dynamic nature of aggregation, it has proven exceedingly difficult to determine the precise interactions that lead to the formation of transient oligomers. A statistical thermodynamic model has been developed to elucidate these interactions. Aß was simulated using fully-atomistic replica exchange molecular dynamics. We use an ensemble of 5 × 105 configurations taken from these simulations as input for a self-consistent …

Development Of A Supplier’S Delivery Time And Delivered Quality Performance Index And Assessment Of Alternative Decisions Regarding Underperforming Suppliers For The Aerospace Industry, Clint Saidy

Theses and Dissertations

This study investigates current practices of supplier’s delivery assessment so that a comprehensive index and a cost function model could be properly developed. Following a thorough literature review, a framework was created based on a penalty cost function that integrates both suppliers’ ability to deliver on time, as well as suppliers’ capability to deliver good quality. Afterward, suppliers could then be ranked and placed either in good standing, or transversely on probation. Underperforming suppliers face three potential outcomes based on current literature: (1) switching supplier, (2) increase collaboration, (3) maintaining the status quo. The decision vis-à-vis failing suppliers is based …

Fundamentals Of Srcoo3 Based Oxygen-Deficient Perovskites As Cathodes For Solid Oxide Fuel Cells, Tianrang Yang

Theses and Dissertations

The local structure and oxygen stoichiometry in oxide systems have a profound impact on oxygen electrocatalysis encountered in metal-air batteries and solid oxide fuel cells (SOFCs). However, this knowledge is often obtained under conditions different from the real working conditions of the material, resulting in misinterpretation and misunderstanding. This PhD dissertation aims to obtain the structure and oxygen stoichiometry information of a class of perovskite oxides under their real working conditions in solid oxide fuel cells. Several perovskite oxides were selected for the study: Sr0.9Y0.1CoO3- (SYC10), Sr0.9Y0.3CoO3- (SYC30), SrCo0.9Nb0.1O3- (SCN10) and SrCo0.9Ta0.1O3- (SCT10). The local crystal structure and oxygen stoichiometry …

Manufacturing Feature Recognition With 2d Convolutional Neural Networks, Yang Shi

Theses and Dissertations

Feature recognition is a critical sub-discipline of CAD/CAM that focuses on the design and implementation of algorithms for automated identification of manufacturing features. The development of feature recognition methods has been active for more than two decades for academic research. However, in this domain, there are still many drawbacks that hinder its practical applications, such as lack of robustness, inability to learn, limited domain of features, and computational complexity. The most critical one is the difficulty of recognizing interacting features, which arises from the fact that feature interactions change the boundaries that are indispensable for characterizing a feature. This research …

Real-Time Communication In Wireless Sensor Networks, Jeongcheol Lee, Babar Shah, Giovanni Pau, Javier Prieto, Ki Il Kim

All Works

No abstract provided.

Energy-Efficient Region Shift Scheme To Support Mobile Sink Group In Wireless Sensor Networks, Yongbin Yim, Kyong Hoon Kim, Monther Aldwairi, Ki Il Kim

All Works

© 2017 by the authors. Licensee MDPI, Basel, Switzerland. Mobile sink groups play crucial roles to perform their own missions in many wireless sensor network (WSN) applications. In order to support mobility of such sink groups, it is important to design a mechanism for effective discovery of the group in motion. However, earlier studies obtain group region information by periodic query. For that reason, the mechanism leads to significant signaling overhead due to frequent flooding for the query regardless of the group movement. Furthermore, the mechanism worsens the problem by the flooding in the whole expected area. To deal with …