Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2018

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 6031 - 6060 of 8951

Full-Text Articles in Engineering

Structural Cyber-Physical Systems: A Confluence Of Structural Health Monitoring And Control Technologies, Rosana E. Martínez-Castro, Shinae Jang Jan 2018

Structural Cyber-Physical Systems: A Confluence Of Structural Health Monitoring And Control Technologies, Rosana E. Martínez-Castro, Shinae Jang

CEE Articles

Many bridges in the nation’s transportation infrastructure network have been found to be structurally deficient. In face of a natural or man-made disaster, this poses a serious threat to the execution of emergency respondent logistics, as the failure of such structures could disconnect communities from the necessary provisions and services that must remain accessible after a disaster. To predict such an eventuality, dependable information on structural status for decision-making can be obtained from structural health monitoring (SHM) systems. However, the avoidance of such a situation is preferred. Structural control systems offer an option to improve structural response during extreme loading …

Go to article

A Half-Yearly E-Newsletter Of The Department Of Computer Science And Engineering Manipal Institute Of Technology, Ashalatha Nayak Jan 2018

A Half-Yearly E-Newsletter Of The Department Of Computer Science And Engineering Manipal Institute Of Technology, Ashalatha Nayak

Faculty work

No abstract provided.

Go to article

Overview Of Smart Manufacturing In West Virginia, Thorsten Wuest, Patrick Schmid, Brian Lego, Eric Bowen Jan 2018

Overview Of Smart Manufacturing In West Virginia, Thorsten Wuest, Patrick Schmid, Brian Lego, Eric Bowen

Bureau of Business & Economic Research

The manufacturing sector is currently reinventing itself by embracing the opportunities offered by the industrial internet, automation, and machine learning, just to name a few. This development is commonly referred to as the Fourth Industrial Revolution or Smart Manufacturing. While Smart Manufacturing can be observed around the globe, there are distinct differences in how it is adopted and embraced between countries, industries, and companies of different sizes. Small- and medium-sized manufacturers are generally understood as the backbone of the manufacturing sector. However, these manufacturers face specific challenges when it comes to the transition toward Smart Manufacturing. This report presents the …

Go to article

Superelastic And Ph-Responsive Degradable Dendrimer Cryogels Prepared By Cryo-Aza-Michael Addition Reaction, Juan Wang, Hu Yang Jan 2018

Superelastic And Ph-Responsive Degradable Dendrimer Cryogels Prepared By Cryo-Aza-Michael Addition Reaction, Juan Wang, Hu Yang

Chemical and Life Science Engineering Publications

Dendrimers exhibit super atomistic features by virtue of their well-defined discrete quantized nanoscale structures. Here, we show that hyperbranched amine-terminated polyamidoamine (PAMAM) dendrimer G4.0 reacts with linear polyethylene glycol (PEG) diacrylate (575 g/mol) via the aza-Michael addition reaction at a subzero temperature (−20 °C), namely cryo-aza-Michael addition, to form a macroporous superelastic network, i.e., dendrimer cryogel. Dendrimer cryogels exhibit biologically relevant Young’s modulus, high compression elasticity and super resilience at ambient temperature. Furthermore, the dendrimer cryogels exhibit excellent rebound performance and do not show significant stress relaxation under cyclic deformation over a wide temperature range (−80 to 100 °C). The …

Go to article

Machine Learning Provides Predictive Analysis Into Silver Nanoparticle Protein Corona Formation From Physicochemical Properties, Matthew R. Findlay, Daniel N. Freitas, Maryam Mobed-Miremadi, Korin E. Wheeler Jan 2018

Machine Learning Provides Predictive Analysis Into Silver Nanoparticle Protein Corona Formation From Physicochemical Properties, Matthew R. Findlay, Daniel N. Freitas, Maryam Mobed-Miremadi, Korin E. Wheeler

Bioengineering

Proteins encountered in biological and environmental systems bind to engineered nanomaterials (ENMs) to form a protein corona (PC) that alters the surface chemistry, reactivity, and fate of the ENMs. Complexities such as the diversity of the PC and variation with ENM properties and reaction conditions make the PC population difficult to predict. Here, we support the development of predictive models for PC populations by relating biophysicochemical characteristics of proteins, ENMs, and solution conditions to PC formation using random forest classification. The resulting model offers a predictive analysis into the population of PC proteins in Ag ENM systems of various ENM …

Go to article

A Survey Of Digital Systems Curriculum And Pedagogy In Electrical And Computer Engineering Programs, Hector A. Ochoa, Mukul V. Shirvaikar Jan 2018

A Survey Of Digital Systems Curriculum And Pedagogy In Electrical And Computer Engineering Programs, Hector A. Ochoa, Mukul V. Shirvaikar

Faculty Publications

Digital Systems is one of the basic foundational courses in Electrical and Computer Engineering. One of the challenges in designing and modifying the curriculum for the course is the fast pace of technology change in the area. TTL chips that were in vogue with students building physical circuits, have given way to new paradigms like FPGA based synthesis with hardware description languages such as VHDL. However, updating a course is not as simple as just changing the book, and changing the syllabus. A large amount of work needs to be done in terms of selecting the book that will accommodate …

Go to article

A Preliminary Study Of Smithport Plain Bottle Morphology In The Southern Caddo Area, Robert Z. Selden Jr. Jan 2018

A Preliminary Study Of Smithport Plain Bottle Morphology In The Southern Caddo Area, Robert Z. Selden Jr.

CRHR: Archaeology

This study expands upon a previous analysis of the Clarence H. Webb collection, which resulted in the identification of two discrete shapes used in the manufacture of the base and body of Smithport Plain bottles. The sample includes the Smithport Plain bottles from the Webb collection, and four new bottles: two previously repatriated specimens in the Pohler Collection, and two from the Mitchell site (41BW4) to test whether those specimens align morphologically with the Belcher Mound or Smithport Landing specimens. Results indicate significant allometry and a significant difference in Smithport Plain body and base shapes for bottles produced at the …

Go to article

The Future Of Groundwater In California: Lessons In Sustainable Management From Across The West, Christina Hoffman Babbitt, Katherine E. B. Gibson, Scott Sellers, Nicholas Brozovic, Anthony Saracino, Ann Hayden, Maurice Hall, Sandi Zellmer Jan 2018

The Future Of Groundwater In California: Lessons In Sustainable Management From Across The West, Christina Hoffman Babbitt, Katherine E. B. Gibson, Scott Sellers, Nicholas Brozovic, Anthony Saracino, Ann Hayden, Maurice Hall, Sandi Zellmer

Daugherty Water for Food Global Institute: Faculty Publications

The 2014 Sustainable Groundwater Management Act (SGMA) created, for the first time and on an unprecedented scale, a mandate to change how groundwater is managed statewide in California. While enacting SGMA was a tremendous step forward, communities and water districts now face the considerable challenge of creating successful groundwater management programs. This report is aimed at helping California’s water managers, public water agencies, county commissioners, city planners, and others better understand the suite of tools and approaches that can be used to enhance the sustainable management of groundwater. Specifically, we consider four categories of management tools—regulatory, incentive-based, agency supply augmentation …

Go to article

Color Removal Of Dye And Milk Wastewater Using Peanut Hull By The Process Of Adsorption, Venkatesh Kummarakuntla Jan 2018

Color Removal Of Dye And Milk Wastewater Using Peanut Hull By The Process Of Adsorption, Venkatesh Kummarakuntla

ETD Archive

Dairy industry is one of the major industries from which organic wastewater is produced and released into the water bodies. Textile industries also generate considerable amount of dye wastewater that effect the water quality standards. Various treatment techniques are adopted to treat the wastewater. Adsorption is one of the low-cost treatment processes to treat the textile and milk wastewater. This thesis focuses on the treatment of combined dye and milk wastewater using the process of adsorption. The treatment process is carried out by using three different types of low cost adsorbents Peanut-hull, Banana peel and Activated carbon. The effectiveness of …

Go to article

Treatment Of Dye Wastewater Using Dehydrated Peanut Hull, Nikitha Shamirpet Jan 2018

Treatment Of Dye Wastewater Using Dehydrated Peanut Hull, Nikitha Shamirpet

ETD Archive

The release of dye waste water into environment causes harm to aquatic life when they reach drains or other water sources. They pollute the soil and causes change in cycles of plant and animal life through bio-accumulation and nutrient cycle. Dyes which form residue or precipitate causes mutations or changes in the DNA of living organisms in and around the area of release of the dye into atmosphere. In this thesis, several runs were attempted to treat the synthetically prepared dye waste water using dehydrated peanut hull. The initial dye waste water samples were all collected and checked for absorbance, …

Go to article

Evolutionary Optimization For Safe Navigation Of An Autonomous Robot In Cluttered Dynamic Unknown Environments, Arash Roshanineshat Jan 2018

Evolutionary Optimization For Safe Navigation Of An Autonomous Robot In Cluttered Dynamic Unknown Environments, Arash Roshanineshat

ETD Archive

We present a path planning approach based on probabilistic methods for a robot to navigate in a cluttered, dynamic, unknown environment. There are dynamic obstacles moving around and static obstacles located in the map. The robot does not have any prior information about them but should be able to navigate through the map beginning from a known starting point and safely ending at a known target point. The only information the robot has is the location of the starting point and the target point and it uses sensory information to collect information about its surroundings. Our method is compared to …

Go to article

From Blockchain To Internet-Based Voting, Elham Akbari Jan 2018

From Blockchain To Internet-Based Voting, Elham Akbari

ETD Archive

Blockchain has been one of the hottest topics among the state-of-the-art technologies. As the enabling technology for Bitcoin, the pioneering cryptocurrency, blockchain is an append-only distributed ledger that is virtually impossible to attack. Hence, blockchain holds great promises as the fundamental technology to enable Internet-based electronic voting. However, Internet-based voting has additional requirements than what monetary transactions such as Bitcoin have to offer. In this thesis, we discuss the key differences of a blockchain-based voting system with digital currencies. In this context we also highlight the requirements, review existing proposed solutions, and outline possible improvements. Specifically, we propose several schemes …

Go to article

Kinetics And Ensemble Dynamics Of Colloidal Ellipsoids Near An Ac Electrode, Jiarui Yan Jan 2018

Kinetics And Ensemble Dynamics Of Colloidal Ellipsoids Near An Ac Electrode, Jiarui Yan

ETD Archive

The manipulation of colloidal particles via applying electric fields has been studied over the past 30 years due to the unique properties associated with the fabricated colloidal crystals. Most works in this field focused on utilizing an alternating current (AC) electric field with spherical particles. However, utilizing spherical colloidal particles as building blocks for complex microstructures has been challenging. Consequently, more recent work has shifted to employing complex colloids (anisotropic in nature) as building blocks for advanced materials. In our work, the phase diagram and the kinetics of assembling colloidal polystyrene ellipsoids under an AC electric field at low frequencies …

Go to article

Modeling Liver Diseases Using Hepatic Cell Microarrays, Alexander David Roth Jan 2018

Modeling Liver Diseases Using Hepatic Cell Microarrays, Alexander David Roth

ETD Archive

Hepatocellular carcinoma (HCC) is an invasive and aggressive cancer of the liver that arises due to chronic cirrhosis. Research into understanding HCC has focused on two-dimensional (2D) and three-dimensional (3D) technologies to simulate the liver microenvironment and use animal models to model how HCC affects the rest of the body. 3D hydrogel models are desired because they can mimic the transport behavior observed in vivo by structurally mimicking the extracellular matrix (ECM) without the ethical concerns of animal models. However, hydrogels can be toxic to cells and require optimal procedures for appropriate handling. In this study, we created 3D models …

Go to article

Advanced Manufacturing Of Titanium Alloys For Biomedical Applications, Nicholas C. Mavros Jan 2018

Advanced Manufacturing Of Titanium Alloys For Biomedical Applications, Nicholas C. Mavros

ETD Archive

In metallurgy, Titanium has been a staple for biomedical purposes. Its low toxicity and alloying versatility make it an attractive choice for medical applications. However, studies have shown the difference in elastic modulus between Titanium alloys (116 GPa) and human bone (40-60 GPa) contribute to long term issues with loose hardware fixation. Additionally, long term studies have shown elements such as Vanadium and Aluminum, which are commonly used in Ti-6Al-4V biomedical alloys, have been linked to neurodegenerative diseases like Alzheimers and Parkinsons. Alternative metals known to be less toxic are being explored as replacements for alloying elements in Titanium alloys. …

Go to article

Implementation Of A Reverse Staggered-Herringbone Microfluidic Mixer For High-Throughput Polymeric Nanoparticles Synthesis, Alexa Roberts Jan 2018

Implementation Of A Reverse Staggered-Herringbone Microfluidic Mixer For High-Throughput Polymeric Nanoparticles Synthesis, Alexa Roberts

Undergraduate Research Posters 2018

The goal of this research is to implement and optimize the operating conditions of a microfluidic mixer to synthesize polymeric nanoparticles (NPs) in a high-throughput fashion. Using a reverse staggered-herringbone microfluidic mixer that we recently designed, the effects of experimental conditions such as flowrate and reactant composition on NP characteristics were investigated and optimized. The device design allowed for physical contact between two streams of fluids – one containing poly(lactic-co-glycolic acid; PLGA) in acetonitrile and the other deionized water, to allow for efficient mixing and NP precipitation to occur. The resulting NPs were characterized using dynamic light scattering (DLS) and …

Go to article

Prediction Of Metabolism-Induced Neurotoxicity On A 384pillarplate, Rushabh Patel, Pranav Joshi, Soo-Yeon Kang, Stephen Hong, Parnian Bigdelou Jan 2018

Prediction Of Metabolism-Induced Neurotoxicity On A 384pillarplate, Rushabh Patel, Pranav Joshi, Soo-Yeon Kang, Stephen Hong, Parnian Bigdelou

Undergraduate Research Posters 2018

Metabolism of compounds including neurotoxins primarily occurs in the liver by a variety of drug-metabolizing enzymes (DMEs) followed by a series of downstream responses. Unmodified (or parent) neurotoxins are transported into human hepatocytes through several influx transporters or via passive diffusion and undergo Phase I and Phase II biotransformation by DMEs before they are cleared. Neurotoxins and their metabolites generated from human hepatocytes could potentially lead to the toxic effects on neural stem cells (NSCs) as the reactive metabolites have potential for producing reactive oxygen species (ROS), which can lead to irreversible oxidative damage to NSCs via lipid peroxidation, DNA, …

Go to article

Dendrite Morphology Of Pb-5.8 Sb Alloy: Gradient Freeze Ds With Cross-Section Area Change, Michael Shannon Jan 2018

Dendrite Morphology Of Pb-5.8 Sb Alloy: Gradient Freeze Ds With Cross-Section Area Change, Michael Shannon

Undergraduate Research Posters 2018

Directional solidification (DS) is the process of solidifying a metal alloy from one end to another resulting in aligned primary dendrites which are branched tree like features. Alignment of primary dendrites along [100] direction and their uniformity and distribution along the DS length determines the mechanical properties. These properties are especially important for single crystal turbine blade applications in modern gas turbine engines. Convection during solidification plays an important role in formation of detrimental defects, such as, misaligned grains, non-uniformity of dendrites and composition inhomogeneity. In this study the microstructural evolution during “Gradient Freeze DS process”, involving an abrupt cross-section …

Go to article

Bespoke Mobile Application Development: Facilitating Transition Of Foundation Students To Higher Education, Nevan Bermingham, Mark Prendergast Jan 2018

Bespoke Mobile Application Development: Facilitating Transition Of Foundation Students To Higher Education, Nevan Bermingham, Mark Prendergast

Books/Book Chapters

Smartphone usage by students has increased rapidly over the last number of years, and it is expected that the utilisation of mobile applications in educational environments will continue to increase. This chapter focuses on a bespoke mobile application which aims to facilitate the transition of Foundation students to Higher Education in an Irish setting. Foundation students comprise of Access and International Students participating on pre-degree foundation courses. These students experience a major life change in making this transition and it is important that efforts are made to ensure a successful adjustment experience. Research suggests that mobile technologies can play a …

Go to article

Where There Is No Engineer Chapter 06, Liam Mccarton, Sean O'Hogain Jan 2018

Where There Is No Engineer Chapter 06, Liam Mccarton, Sean O'Hogain

Books/Book Chapters

This chapter summarises the learning outcomes from the design program.

Go to article

An Yb3+-Ho3+ Codoped Glass Microsphere Laser In The 2.0Μm Wavelength Regions, Angzhen Li, Jibo Yu, Meng Zhang, Xiaosong Lu, Jiquan Zhang, Elfed Lewis, Gerald Farrell, Pengfei Wang Jan 2018

An Yb3+-Ho3+ Codoped Glass Microsphere Laser In The 2.0Μm Wavelength Regions, Angzhen Li, Jibo Yu, Meng Zhang, Xiaosong Lu, Jiquan Zhang, Elfed Lewis, Gerald Farrell, Pengfei Wang

Articles

In this letter, an Yb 3+ -Ho 3+ codoped sol-gel silica microsphere lasing at around 2.0 μm is reported. The gain microsphere is fabricated by overlaying the 1.0 mol% Yb 3+ -0.2 mol% Ho 3+ codoped sol-gel solution on the surface of a pure silica microsphere and is then heated using a CO 2 laser. Using a traditional fiber taper-microsphere coupling method, we observe the single- and multi-mode microsphere laser outputs around 2.0 μm using a 980 nm laser diode as a pump source, with a low threshold pumping power of 14.7 mW. The ability to fabricate sol-gel codoped silica …

Go to article

A High-Temperature Humidity Sensor Based On A Singlemode-Side Polished Multimode-Singlemode Fiber Structure, Xianfan Wang, Ke Tian, Libo Yuan, Elfed Lewis, Gerald Farrell, Pengfei Wang Jan 2018

A High-Temperature Humidity Sensor Based On A Singlemode-Side Polished Multimode-Singlemode Fiber Structure, Xianfan Wang, Ke Tian, Libo Yuan, Elfed Lewis, Gerald Farrell, Pengfei Wang

Articles

A relative humidity (RH) sensor based on a simple singlemode-side polished multimode-singlemode (SSPMS) fiber hybrid structure is investigated, which is capable of working over a relatively high-temperature range, at which many RH sensors based on moisture sensitive material coatings cannot operate. The beam propagation method is used to analyze the light transmission characteristics within the side polished multimode fiber (SPMMF) structure. Experimental results show that the SPMMF surface roughness has a significant influence on the sensor's humidity sensing performance, as a result of the adsorption and desorption of water molecules along the side polished surface. A higher surface roughness results …

Go to article

A High Sensitivity Temperature Sensor Based On Balloon-Shaped Bent Smf Structure With Its Original Polymer Coating, Ke Tian, Gerald Farrell, Elfed Lewis, Xianfan Wang, Haidong Liang, Pengfei Wang Jan 2018

A High Sensitivity Temperature Sensor Based On Balloon-Shaped Bent Smf Structure With Its Original Polymer Coating, Ke Tian, Gerald Farrell, Elfed Lewis, Xianfan Wang, Haidong Liang, Pengfei Wang

Articles

A high sensitivity optical fibre temperature sensor is demonstrated based on a balloon-shaped bent single-mode (BSBS) fibre structure where the fibre retains its original protective polymer coating. The BSBS fibre structure can be simply realized by bending a coated straight singlemode fibre into the balloon shape using a section of silica capillary tube. By adjusting the bending radius of the balloon-shaped fibre section, a modal interferometer between the core mode and the coating mode can be effectively implemented at a suitable bending radius. Considering the intrinsically high thermo-optical coefficient and thermal expansion coefficient of the polymer coating, the BSBS fibre …

Go to article

Position Paper: Collaborative Research, Caitriona Quinn Jan 2018

Position Paper: Collaborative Research, Caitriona Quinn

Other resources

This position paper is written on the topic of collaborative learning and how it might improve the ability of students, specifically third level students, to achieve learning outcomes within the construct of a project-based module. It is the author’s position that this statement is true. The topic is be discussed in relation to two specific aspects within the topic, student motivation and achievement of learning outcomes. Collaborative learning is based in social constructivism learning theory, which says that learning is co-created in a social context by learners. This is in contrast to the transmission method of learning, typified by traditional-style …

Go to article

Validation Of Low-Cost Wireless Eeg System For Measuring Event-Related Potentials, Yongxiang Wang, Zhengwei Wang, William Clifford, Charles Markham, Tomas Ward, Catherine Deegan Jan 2018

Validation Of Low-Cost Wireless Eeg System For Measuring Event-Related Potentials, Yongxiang Wang, Zhengwei Wang, William Clifford, Charles Markham, Tomas Ward, Catherine Deegan

Conference Papers

This study used the traditional P300 speller paradigm to compare a medical grade Electroencephalography (EEG) system, the G.Tec, with a consumer grade EEG system, the Emotiv, in the detection of P300 components within Event Related Potential (ERP) signals. The experiment focused on four electrodes known to produce optically induced visual evoked potential. A successful comparison of the two approaches was made. It was shown that both systems could measure an ERP. The paper concludes with discussion comparing the low-cost wireless EEG system with the medical grade EEG system.

Go to article

Improved Embedded Atom Method Potentials For Metal Hydride Systems, Robert Fuller Jan 2018

Improved Embedded Atom Method Potentials For Metal Hydride Systems, Robert Fuller

Theses, Dissertations and Capstones

Metal hydride systems are an important research topic in materials science because of their many practical, industrial, and scientific applications. Therefore, the development of reliable and efficient interatomic potentials for metal hydrides systems, to be utilized in molecular simulations, can be of great value in accelerating the research in this field. In this research, fully analytical interatomic Embedded Atom Method (EAM) potentials are developed for the PdAgH system. Ab initio simulations were performed to obtain the properties of selected PdAgH structures for fitting. The potentials are fit utilizing the central atom method without employing time-consuming molecular dynamics simulations in the …

Go to article

Design And Simulation Of A Pneumatic Actuator Bending Soft Robotics Based On 3d Printing, Chenyu Zheng Jan 2018

Design And Simulation Of A Pneumatic Actuator Bending Soft Robotics Based On 3d Printing, Chenyu Zheng

Theses, Dissertations and Capstones

Robots mechatronic devices are able to replicate human actions, especially in dangerous environments and in manufacturing. Recently, the development of robotics has been inspired by bionics. The advanced robotics allow advanced robots to be used in new environments where they were not traditionally applicable, such as narrow and small spaces. Compared to traditional rigid robots, soft robots are made by deformable materials and possess high dexterity and adaptivity in harsh working environments. Traditional soft robots are made by casting. The method implies that the molds of soft robots should be designed and printed by a 3D printer first, before casting. …

Go to article

Comparing And Enhancing The Analytical Model For Exposure Of A Retail Facility Layout With Human Performance, Bradley R. Guthrie, Pratik Parikh, Tyler Whitlock, Madison Glines, Thomas Wischgoll, John Flach, Scott Watamaniuk Jan 2018

Comparing And Enhancing The Analytical Model For Exposure Of A Retail Facility Layout With Human Performance, Bradley R. Guthrie, Pratik Parikh, Tyler Whitlock, Madison Glines, Thomas Wischgoll, John Flach, Scott Watamaniuk

Computer Science and Engineering Faculty Publications

Recent research in retail facility layout has focused on developing analytical models to estimate visibility measures of novel rack layouts based on assumptions about a shopper’s field of view. However, because of the human element involved in the shopping experience, it is vital to compare these models relative to actual human performance. In this study, we evaluate the predictions of our previously developed analytical model (that estimates exposure of every location on a given rack layout assuming expected head movement) in a 3D Virtual Environment (VE). We conducted trials with 18 participants who were asked to find targets strategically placed …

Go to article

Carbon Nanotube Ultracapacitor Characteristics And Cell Design, Antonis A. Orphanou Jan 2018

Carbon Nanotube Ultracapacitor Characteristics And Cell Design, Antonis A. Orphanou

Engineering Ph.D. Theses

A model of carbon nanotube (CNT) ultracapacitor (CNU) as a high-performance energy storage device is developed based on simulations of electrolyte ion motions between cathode and anode. Using a molecular dynamics (MD) approach, the equilibrium positions of electrode charges interacting through Coulomb potential are determined, which in turn yield the equipotential surface and electric field associated with the capacitor. With an applied AC voltage, the current is computed from the nanotube and electrolyte particle distribution and interaction, resulting in a frequency-dependent CNU impedance. From the current and impedance profiles, the Nyquist and Cyclic Voltammetry plots are then extracted. Results of …

Go to article

Engineering News, Winter 2018, School Of Engineering Jan 2018

Engineering News, Winter 2018, School Of Engineering

Engineering News

No abstract provided.

Go to article

First Prev Next Last