Engineering Commons^™

Nature Inspired Technology: A New Process For Silicification Based On Marine Sponges, Ami Atul Shah

Material Science and Engineering Dissertations - Archive

Silica is used in various industries, ranging from automobile industry for tires to semiconductor industry, paints and coatings, biomedical devices & applications to food & drug industry. The current processing techniques for precipitated silica involve harsh conditions like high temperature and extreme pH conditions. Nature already has highly evolved production techniques for silica. They run at physiological conditions and exhibit intricate control over the synthesis, leading to very pure and ornate siliceous structures. These structures exhibit organized architecture at scales as small as nano-dimensions. The proposed research work is a step, towards development of new techniques that bio-mimic the silica …

Investigation Of The Processing-Structure-Property Relationship In Ta-Si-N Nanocomposite Coatings, Anna Zaman

Material Science and Engineering Dissertations - Archive

The present-day industry demands development of coatings for harsh environmental applications which can resist impact and oxidation at high temperatures. It is vitally important to develop new hard (>30 GPa) protective coatings which will be thermally stable at temperatures, T > 800 °C and simultaneously will ensure a good protection of the substrate against oxidation from an external atmosphere. The limitations of conventional coatings due to inferior hardness or poor oxidation stability can be overcome by nanocomposite coatings as they exhibit enhanced and completely new properties. To address this requirement of new enhanced protective systems, there is a need to …

New Mixture Additives For Sustainable Bituminous Pavements, Gabriel Mukristu Nsengiyumva, Kommidi Santosh, Yong-Rak Kim, Helan Xu, Yiqi Yang

Nebraska Department of Transportation: Research Reports

In an effort to improve mechanical properties of asphalt concrete, an exploratory research using mixture additives was attempted. Two different types of additives on two material scales were used: asphalt concrete (AC) level and binder level. At the start of this study, the effect of natural cornhusk fibers on the resistance of two types of AC mixtures on cracking were tested for hot-mix asphalt (HMA) and cold-mix asphalt (CMA). The results showed slight improvements in cracking resistance in cornhusk reinforced HMA, and in the case of the CMA, marshal flow. Overall, based on the test results, cornhusk-reinforced HMA and CMA …

Optimal Surgical Plating Of Mandibular Angle Fractures: A Validated Finite Element Model, Brett Seeley-Hacker

Wetterhahn Science Symposium Posters 2018

No abstract provided.

Characterization And Selection Of Hydroxyl-Terminated Polybutadiene Polymers For High-Strain Applications, Nathaniel Prine

Honors Theses

Understanding the behavior of hydroxyl-terminated polybutadiene (HTPB) as a composite matrix is imperative for the development of future military and aerospace munition technology. As a vital component of solid rocket fuel, HTPB strongly contributes to the fatigue behavior, burn-rate, and other properties that can cause critical failure of the rocket if not formulated properly. The purpose of this research is to identify traits characteristic of poor-performing HTPB matrices by analyzing two samples labeled as either “good” or “bad” based on their performance as a fuel matrix. Samples were analyzed via 1H NMR and GPC to determine their epoxy content, hydroxyl …

Thiol–Ene Photopolymerization: A Simple Route To Pro-Antimicrobial Networks Via Degradable Acetals (Pandas), William Martin

Honors Theses

The World Health Organization (WHO) has brought the growing epidemic of antibiotic resistance bacteria to the attention of the public and has expressed the need for the development of new methods of defense. In this direction, bioactive aldehyde essential oils have been shown to effectively act as antibiotic and antifungal agents. These bioactive compounds, when used in their pure form, are volatile and lack environmental stability. In this thesis, we describe the synthesis of pro-antimicrobial networks via degradable acetals (PANDAs) using thiol-ene photopolymerization. PANDAs were used as a new model for the high loading and release of bioactive aldehyde-containing compounds …

An Empirical Study On The Recovery Speed Of Usb Flash Drives Utilizing Raid-5 Compared To Hdds And Ssds, Joshua Manuel Martins

Honors Theses

Since their creation and implementation, storage drives have undergone and continue to undergo drastic changes in speed, size, and reliability. The original storage drives, known as hard disk drives (HDDs), are constructed using moving parts. The second modern type of storage drives, known as solid state drives (SSDs), are constructed using a series of silicon chips that utilize no moving parts. The third and most recent innovation in storage drives, known as USB flash drives (USBs), use only a single silicon chip to provide storage which grants them the smallest form factor of the three drive types.

This study compared …

Biocompatible, Responsive Polysoaps Via Raft Copolymerization For The Delivery Of Model Cancer Therapeutics, Mason Dearborn

Honors Theses

Many chemotherapeutic drugs are small, hydrophobic molecules that require water-soluble, biocompatible nanocarriers for enhanced vascular circulation. Existing polymeric carriers either conjugate the drug along a copolymer backbone or sequester drugs within a protected interior domain to be delivered to specific sites in the body. Such therapeutic systems must overcome a myriad of hurdles, beginning with complex, multi-step syntheses, followed by other inherent barriers that limit the efficiency of drug delivery at the targeted site. This work aims to circumvent a number of these issues using biocompatible, stimuli-responsive polysoaps that are capable of unimeric micelle formation, hydrophobic drug delivery, and triggered …

Corner Sealants For Tactical Shelters, Janine Carlita Nowak

Honors Theses

The demand for a lightweight, easy-assembly tactical shelter is high for those faced with unexpected disasters and global conflicts. This project focuses on designing and prototyping the corner sealant for such a shelter. Two materials were chosen and tested: an in-house thermoplastic polyurethane (TPU) and Texin 950. Thermogravimetric Analysis (TGA) was performed on both of these materials. The in-house TPU showed initial degradation at 282.50 °C and sample degradation at 457.45 °C. Similarly, Texin 950 showed initial degradation at 293.68 °C and sample degradation at 453.26 °C. Differential Scanning Calorimetry (DSC) was then run. The crystallization temperature (Tc) was observed …

Consensus Ensemble Approaches Improve De Novo Transcriptome Assemblies, Adam Voshall

School of Computing: Dissertations, Theses, and Student Research

Accurate and comprehensive transcriptome assemblies lay the foundation for a range of analyses, such as differential gene expression analysis, metabolic pathway reconstruction, novel gene discovery, or metabolic flux analysis. With the arrival of next-generation sequencing technologies it has become possible to acquire the whole transcriptome data rapidly even from non-model organisms. However, the problem of accurately assembling the transcriptome for any given sample remains extremely challenging, especially in species with a high prevalence of recent gene or genome duplications, those with alternative splicing of transcripts, or those whose genomes are not well studied. This thesis provides a detailed overview of …

Application Of Cosine Similarity In Bioinformatics, Srikanth Maturu

School of Computing: Dissertations, Theses, and Student Research

Finding similar sequences to an input query sequence (DNA or proteins) from a sequence data set is an important problem in bioinformatics. It provides researchers an intuition of what could be related or how the search space can be reduced for further tasks. An exact brute-force nearest-neighbor algorithm used for this task has complexity O(m * n) where n is the database size and m is the query size. Such an algorithm faces time-complexity issues as the database and query sizes increase. Furthermore, the use of alignment-based similarity measures such as minimum edit distance adds an additional complexity to the …

Characterization And Analysis Of Ultrathin Cigs Films And Solar Cells Deposited By 3-Stage Process, Grace Rajan, Krishna Aryal, Shankar Karki, Puruswottam Aryal, Robert W. Collins, Sylvain Marsillac

Electrical & Computer Engineering Faculty Publications

In view of the large-scale utilization of Cu(In,Ga)Se₂ (CIGS) solar cells for photovoltaic application, it is of interest not only to enhance the conversion efficiency but also to reduce the thickness of the CIGS absorber layer in order to reduce the cost and improve the solar cell manufacturing throughput. In situ and real-time spectroscopic ellipsometry (RTSE) has been used conjointly with ex situ characterizations to understand the properties of ultrathin CIGS films. This enables monitoring the growth process, analyzing the optical properties of the CIGS films during deposition, and extracting composition, film thickness, grain size, and surface roughness which …

Impact Of Computer Tablets On General Aviation Flight Training, Anthony Saitabau Lolchoki

Theses and Dissertations

Over the past two decades, Electronic Flight Bags (EFBs) and Personal Electronic Devices (PEDs) have developed from flight publication storage devices hosted on modified laptop computers into fully interactive near-avionics-quality navigation equipment based on consumer-grade tablet computers. Broadly speaking, the Code of Federal Regulation (CFR) 14 regulates the use of this type of equipment for commercial airlines, commuter operations, and fractional ownership operators, but have neglected the General Aviation (GA) sector. Due, in part, to this lack of governance, little has been known about EFB use in GA. After using an internet-based survey, this study was conducted to examine whether …

Energy Sustainability Analysis Of A Baja Test Facility, Seth Bishop

Honors Theses

The objective of this paper is to study the viability of building a Baja SAE competition site so that UTC could host events in the future. Part of this includes defining a building size in square feet and estimating the construction cost. Once that is accomplished it is necessary to determine what equipment may be used at the site, how much power each piece of equipment would use, and how many hours each would be used for within the year. With this information it is then possible to estimate the annual power consumption for a competition year and a regular …

Design Of A Pneumatic Conveying Test Loop For Laboratory Testing, Natalie Burdine

Honors Theses

Pneumatic conveying is the transportation of material through a closed conveying line in a gas medium via a pressure differential. In industry, pneumatic conveying is used extensively to handle materials: specifically, bulk solids and powders. 80% of all transported materials are bulk solids and pneumatic conveying is currently experiencing industry growth at a rate of 6.4% annually. Industrial pneumatic conveyor suppliers use specialized testing systems to make design decisions regarding specific applications, taking into account the conveyed material, the structure of the plant in which the system will be installed, and desired system characteristics such as necessary filtering or safety …

The Measurement Of The Adhesion Of Glaze Ice., Andrew Hardesty Work Jr.

Electronic Theses and Dissertations

Icing is a lethal and costly aviation hazard affecting aircraft of all sizes ranging from small UAVs to large commercial craft such as the Boeing 787, resulting in hundreds of deaths over the last century and resulting in billions of dollars of economic impact. Three predominant types of icing, namely, airframe icing, engine icing, and rotorcraft icing, dominate aircraft icing research. Each type poses unique challenges. In the case of rotor icing, attention needs to give to the rotating environment with large oscillatory loads and icing conditions. In the case of airframe icing, special attention needs to be paid to …

Ultrasonic Nondestructive Evaluation Of Metal Additive Manufacturing., Venkata Karthik Nadimpalli

Electronic Theses and Dissertations

Metal Additive Manufacturing (AM) is increasingly being used to make functional components. One of the barriers for AM components to become mainstream is the difficulty to certify them. AM components can have widely different properties based on process parameters. Improving an AM processes requires an understanding of process-structure-property correlations, which can be gathered in-situ and post-process through nondestructive and destructive methods. In this study, two metal AM processes were studied, the first is Ultrasonic Additive Manufacturing (UAM) and the second is Laser Powder Bed Fusion (L-PBF). The typical problems with UAM components are inter-layer and inter-track defects. To improve the …

Horse Racing Prediction Using Graph-Based Features., Mehmet Akif Gulum

Electronic Theses and Dissertations

This thesis presents an applied horse racing prediction using graph based features on a set of horse races data. We used artificial neural network and logistic regression models to train then test to prediction without graph based features and with graph based features. This thesis can be explained in 4 main parts. Collect data from a horse racing website held from 2015 to 2017. Train data to using predictive models and make a prediction. Create a global directed graph of horses and extract graph-based features (Core Part) . Add graph based features to basic features and train to using same …

Designing Synthetic Environments To Control Valvular Interstital Cells In Vitro, Kent E. Coombs

Biomedical Sciences ETDs

Aortic valve disease (AVD) is a large contributor to health costs in the United States affecting 2.8% of the population greater than 75 years old. With a growing elderly population due to medical advances, AVD will continue to rise in prevalence over time. Current treatments for AVD are insufficient due to a lack of preventative therapies and the bioprosthetic valves used for surgical replacement have major limitations. Tissue engineered heart valves (TEHVs) present an ideal solution to current AVD needs because of their biocompatibility, capability to integrate with the host’s tissue, and ability to utilize the natural repair mechanisms of …

Authentication Via Openathens: Implementing A Single Sign-On Solution For Primo, Alma, And Ezproxy, Travis Clamon

ETSU Faculty Works

OpenAthens is a hosted identity and access management service that provides a streamlined solution for implementing single sign-on authentication. This presentation will outline the steps East Tennessee State University took to configure OpenAthens authentication across the Alma, Primo, and EZproxy platforms. We will give a brief overview of the internal configurations related to LDAP integration, allocating electronic resources, and selectively assigning permissions. Finally, we will share our experiences with OpenAthens including support, vendor adoption, and end user benefits.

Development Of A Model To Predict The Likelihood Of Complaints Due To Assorted Tone-In-Noise Combinations, Joonhee Lee, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper develops a model to predict if listeners would be likely to complain due to annoyance when exposed to a certain noise signal with a prominent tone, such as those commonly produced by heating, ventilation, and air-conditioning systems. Twenty participants completed digit span tasks while exposed in a controlled lab to noise signals with differing levels of tones, ranging from 125 to 1000 Hz, and overall loudness. After completing the digit span tasks under each noise signal, from which task accuracy and speed of completion were captured, subjects were asked to rate level of annoyance and indicate the likelihood …

Predicting The Impact Of Resource Delays On A Construction Project’S Critical Path Using Monte Carlo Simulation, Colby Weishaar

Graduate Theses and Dissertations

The construction industry is a complex and evolving industry, making the project manager’s job of planning, organizing, and making decisions a difficult one. One of the most difficult decisions throughout a project is determining what resources are needed to complete a task by the deadline. Uncertainties cause risks within the schedule often creating delays for which the project manager must develop a mitigation plan once risks are identified. After conducting a review of the literature, no research was found examining the use of an analytical model to estimate the delays caused within the resource allocation process. If an analytical model …

Design Of A Multidirectional Wear Testing Device For Simulating Wear Of Biocompatible Materials Used In Joint Implants, Carlos A. Rodriguez Betancourth

Theses and Dissertations

In the present work, a novel multidirectional pin-on-disc wear testing device designated CNC-POD (computer-numerical-control pin-on-disc) capable of replicating the cross-shear motions experienced by a prosthesis in vivo was designed and developed in the UTRGV in order to evaluate the wear resistance of new biomaterials. The CNC-POD consists of six temperature-controlled pin-on-disc stations mounted on a two-axis CNC table (X-Y). Each pin-on-disc station is load-programmable up to 510 Newtons (115 pounds). The CNC table allows the machine to reproduce a wide range of 2D patterns in millimeter scale on the six stations under a specific load. Friction force is measured during …

Bs News May/June

Building Services Engineering

No abstract provided.

Non-Covalent Functionalization Of Graphene Films For Uniform Nanoparticle Deposition Via Atoic Layer Deposition, Ty Seiwert

Mechanical Engineering Undergraduate Honors Theses

Graphene functionalized with platinum (Pt) and palladium (Pd) has proven to be highly effective as a hydrogen sensor. Deposition methods such as Atomic layer deposition (ALD) can be further enhanced by pretreating the graphene with a non-covalent surfactant prior to nanoparticle deposition. In this study, graphene-based sensing devices will be fabricated by ALD deposition. The graphene will be non-covalently functionalized using sodium dodecyl sulfate (SDS) anionic surfactant prior to ALD deposition. The aim of this study is to test the deposition pattern achieved by varying the amount of time that graphene is treated with the SDS surfactant. Initially, ALD deposition …

Baseline Data From Servo Motors In A Robotic Arm For Autonomous Machine Fault Diagnosis, Jacob Brown

Mechanical Engineering Undergraduate Honors Theses

Fault diagnosis can prolong the life of machines if potential sources of failure are discovered and corrected before they occur. Supervised machine learning, or the use of training data to enable machines to discover these faults on their own, makes failure prevention much easier. The focus of this thesis is to investigate the feasibility of creating datasets of various faults at both the component and system level for a servomotor and a compatible robotic arm, such that this data can be used in machine learning algorithms for fault diagnosis. The faults induced at the component level in different servomotors include: …

Design Of A Low-Cost Capillary Electrophoresis Laser-Induced Fluorescence System: Lessons Learned When Trying To Build The Lowest Possible Cost System, Steven James Perry

Theses and Dissertations

Capillary electrophoresis laser-induced fluorescence (CE-LIF) is widely used to detect both the presence and concentration of fluorescently labeled biomolecules. In CE-LIF, a plug of sample fluid is electrophoretically driven down a microchannel using a high voltage applied between the opposite ends of the microchannel. Molecules of different sizes and charge states travel at different velocities down the channel. Laser light with a wavelength in the excitation band of the fluorophores is focused near the end of the channel. As each species of molecule passes through the laser spot, the fluorophores emit a fluorescence signal which is measured with an optical …

Biodegradation Of Phenolic Components In Wastewater By Micro Algae: A Review, Muthanna H. Al-Dahhan, Faris Hammoodi Al-Ani, Adaf Jadaan Obaied Al-Saned

Chemical and Biochemical Engineering Faculty Research & Creative Works

The biodegradation of phenolic contaminant present in wastewater by micro algae has been investigated in the current research. The study focused on algae growth requirements and factors affecting algae growth in contaminated water leading to the best treatment. Different techniques used to functionalize microalgae in the treatment such as batch and continuous operation modes have been further investigated. Mechanisms for microalgae pollutants degradation and microalgae growth kinetics were also highlighted to present the required knowledge in phenol contaminant biodegradation field by microorganisms.

Comparison Between Cold/Hot Smart Water Flooding In Sandstone Reservoirs, Hasan N. Al-Saedi, Ariel Williams, Ralph E. Flori

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The incremental oil recovery has been investigated and approved by many laboratory and field projects using water flooding in tertiary stage. The salinity of the injected water is an important factor observed by many researchers. The more salinity decreases the more oil recovery obtained. The investigations on the hot low salinity water flooding have been conducted by many researchers and they found out that it is useful for increasing oil recovery especially heavy oil due to reducing oil viscosity and make it easy to produce to the surface. The thermal expansion of water plays an important role in the incremental …

Journeyman International – Kalisher Multi-Purpose Center, Chelsea Trumbull

Construction Management

The Kalisher Multi-Purpose Center in Rwanda was completed through a non-profit organization, Journeyman International. Dan and Frances Klinck created a vision for a master plan in the Sunzu Yacu Village in Rwanda and teamed up with Journeyman International to accomplish it. The Kalisher Multi-Purpose Center is the next step in completing their master plan. This center will serve as a place of gathering and community for the locals. It will house various events including, but not limited to: community meetings, private ceremonies, performances, church gatherings, learning opportunities and a space for growth. This project was interdisciplinary and combined efforts from …