Engineering Commons^™

Experimental Investigation Of Enhanced Damage Resistant Fiber Metal Laminates, Cannelle Metang Tefoung

Doctoral Dissertations and Master's Theses

Fiber metal laminates (FMLs) are hybrid composite structures made from fiber reinforced polymeric materials sandwiched between layers of thin metal alloy sheets. FMLs combine the advantages of metallic materials and fiber reinforced matrix systems. Some of these advantages include: lighter weight, enhanced impact tolerance, improved corrosion resistance, better fire resistance, longer fatigue life, greater tensile strength, easier repair ability and maintainability, etc. The most well-known commercially available FML is GLARE (Glass Laminate Aluminum Reinforced Epoxy), however there are ongoing issues, which include a very high fabrication cost compared to many competing material systems and substantial delamination upon impact and failure. …

Low-Fare Flights Across The Atlantic: Impact Of Low-Cost, Long-Haul, Trans-Atlantic Flights On Passenger Choice Of Carrier, Jennifer Nicole Hunt

Doctoral Dissertations and Master's Theses

Full-service carriers (FSCs) have long ruled the trans-Atlantic market, due to the absence of low fare competition, which has kept airfares high. However, renewed interest in low-cost, long-haul (LCLH) flights was prompted by efficient aircraft, low fuel prices, liberalization of air markets, and low-cost carriers’ growth opportunities. Since 2013, multiple LCLH carriers have commenced trans-Atlantic operations, and their market share has grown to 8%. In response, FSCs are establishing their own LCLH subsidiaries and/or introducing basic economy airfares to more effectively compete in the trans-Atlantic market. The purpose of this dissertation was to further the understanding of LCLH and FSC …

Sustainability Children's Book, Linden Cheek

Biological and Agricultural Engineering Undergraduate Honors Theses

As human driven climate change continues to alter our planet, persuading the general public to adopt sustainable living practices has become increasingly important. Storytelling has long been a part of human culture, and recent studies have emphasized the power of storytelling to influence the audience as a means of changing behavior. This project attempted to teach sustainable principles to primary school children through the creation of a scientific children’s book. The book communicated the maxim of “reduce, reuse, recycle” by tracing a fictitious story of a town where children frequently buy new toys and throw the old toys away. The …

Effect Of Incubation Temperature On Phosphorous Release From Soils To Water, Seth Boles

Biological and Agricultural Engineering Undergraduate Honors Theses

In recent years, nutrient release into flood waters and runoff has been a major concern within the Illinois River watershed, as well as nationwide. This study investigated whether there was a change in the release rate of soluble reactive phosphorous (SRP) into overlying water from soil cores incubated at different temperatures. Soil cores were incubated at 4.4°C, 20°C, and 32°C. After inundation, water samples were taken periodically over a seven-hour period and SRP measured. Following the drainage of the water, the upper 5 cm soil from each core was dried and analyzed for Mehlich III-extractable and water-extractable P. The results …

Nutrient Limitation Of Algal Growth In Fishery Lakes, Madeline Ludwig

Biological and Agricultural Engineering Undergraduate Honors Theses

This study investigated the effect of nutrient addition on algal growth in three United States Forest Service lakes for fishery management in Arkansas. In fishery managed lakes, fertilization works by manipulating algae growth, a basal food resource in lakes, to promote the growth of the fish population. For the nutrient addition experiments, water was collected from each lake in cubitainers and spiked with nutrients; the treatments included the control, nitrogen (+N), phosphorus (+P), and nitrogen and phosphorus (+N +P). When algal growth was visually observed, a water sample was collected from each cubitainer and analyzed for chlorophyll-α. The results showed …

Investigating Initial Interactions Between Silver Nanoparticles And Wastewater, Casey Gibson

Biological and Agricultural Engineering Undergraduate Honors Theses

The use of nanoparticles (NPs) has increased exponentially in the last 15-20 years, especially in the consumer market. NPs are currently found in over 1800 commercial products, including cosmetics, clothing, packaging, and toys. As a result, NPs can enter the environment via wastewater (WW) streams, leading to new challenges in WW treatment. This study focuses on the initial fate of silver nanoparticles (AgNPs) in WW. The AgNP interaction including aggregation and dissolution in both synthetic and real WW were studied. Real WW was collected from the primary-clarifier, secondary-clarifier, and effluent WW streams at two local WW treatment plants (Westside and …

Optimizing Genetic Manipulation Of Methanogens Through Faster Cloning Techniques, Merrisa Jennings

Biological and Agricultural Engineering Undergraduate Honors Theses

Methanogenesis is the biological production of methane. Only anaerobic archaea known as methanogens are capable of such a metabolic feat. They have strict living conditions and substrate sources which determine their rate of metabolism. This is of particular importance from a greenhouse gas reduction perspective or biogas capturing perspective. One of the best ways to optimize methanogen methane production is via genetic manipulation. The current procedures are timely though, therefore a faster cloning processes should be developed. The objective of this study was to optimize a premade genetic transformation kit known as the Gibson Kit. The Gibson Kit was supposed …

Chloride Salt Inhibition On Lipid Production In Wastewater-Grown Algae For Biofuel Production, Will Richardson

Biological and Agricultural Engineering Undergraduate Honors Theses

Algae are increasingly being recognized as useful organisms for many applications in today’s world. Their ability to remove nitrogen, phosphorus, and trace metals from water while adding oxygen to water makes them an attractive tertiary treatment technology in municipal wastewater treatment facilities. At the same time, algae produce lipids and carbohydrates that are useful for biofuel production, and they are not a human food crop unlike many biofuel feedstocks. In this study the effect of increased chloride concentrations in wastewater was assessed on the ability of two species of algae, Chlorella vulgaris and Scenedesmus dimorphus, to function as a …

Assessing Auto-Flocculation Of Microalgae In Wastewater Treatment, Alexander Parr

Biological and Agricultural Engineering Undergraduate Honors Theses

Biofuels produced from algae have the prospect to provide a cheap, carbon neutral alternative to fossil fuels. However, the high cost for harvesting algae limits its wide application, as the preferred algae strains for biofuel production are typically unicellular microalgae that do not settle in water very well. Recently, researchers have been focusing on developing a biological method to achieve the sedimentation of algae through flocculation. A recent study has concluded that introducing microalgae that self-flocculates increases the recovery of the desired microalgae, similar to the effect of using coagulant to flocculate the algae. This option can potentially be more …

In-Cage Surface Wetting System For Cooling Poultry In Transport, Ryan Clark

Biological and Agricultural Engineering Undergraduate Honors Theses

Abstract

Poultry health and mortality rates are important considerations in poultry production, as companies can minimize product loss and appeal to a consumer base whose concern for animal welfare continues to grow. Although animal welfare is a consideration for the entire poultry production process, this project focuses on the live-haul phase of the process, specifically during transport from grow houses to processing facilities. During the summer months, broiler chickens being transported can suffer from heat stress that can lead to death. This project consists of the designing and testing of an in-cage surface wetting system to minimize heat stress incidents …

Optically Active Dye-Based Systems Templated By Dna Exhibiting Excitonic Delocalization, Brittany Lynn Cannon

Boise State University Theses and Dissertations

The concept of quantum computing was first developed in the early 1980’s. The attraction of quantum computers is their potential capacity to solve extremely complex problems, such as factorization, on a timescale far faster than that of classical computers. However, realization of quantum computation is currently in its infancy, and recent implementations possess serious drawbacks that reduce their appeal. Some challenges of current designs include the necessity to cool the systems using liquid helium to near absolute zero temperatures (15 mK) in order to maintain sufficiently long-lifetimes of the Qbits (i.e., unit of quantum information), difficulty with scaling up the …

Framework For Determining The Pullout Resistance Of Inextensible 2-Wire Soil-Reinforcing Elements Embedded In Sand, Thomas Patrick Taylor

Civil Engineering Dissertations - Archive

Mechanically Stabilized Earth (MSE) has been successfully used as a commercial retaining structure since its development in 1963 by Henry Vidal (Schlosser 1990). MSE is a ground improvement system that consists of soil-reinforcing, compacted backfill, and a facing. The initial soil-reinforcing developed for commercial use by Vidal consisted of a smooth steel strip. Since then, a diverse range of soil-reinforcing has been developed, including extensible and inextensible reinforcing. The various geometric configurations of soil-reinforcing have included wide width and narrow width elements comprising planar strips, planar grids, co-planar strips, co-planar grids, and wide sheets. General specifications categorize inextensible soil-reinforcing into …

Reduced Order Modeling For Virtual Building Commissioning, Sean Rosin

Boise State University Theses and Dissertations

Model order reduction can help reduce the time and monetary constraints associated with building commissioning and significantly decrease overall building energy consumption through virtual commissioning. This research aimed to determine the effectiveness of using reduced order models to simulate the overall building energy consumption, and to estimate the energy savings from control-based commissioning recommendations.

A case study building was modeled using a ‘Lumped RC’ thermal model with three thermal resistances and capacitances (3R3C) for the building interior and a 2R1C model describing the building foundation. Due to energy consumption being dependent on building systems, this model was coupled with a …

The Future Of Construction As It Applies To The Colonization Of The Moon And Mars, Julian Prestia

UNLV Theses, Dissertations, Professional Papers, and Capstones

The goals of this research are:

1. To compile a comprehensive list of all the viable known solutions (and early stage potential solutions) to the issues related to constructing permanent, sustainable, and safe structures for human colonies on our moon and Mars,

2. Determine the most effective potential solutions, and

3. Further develop these ideas as to assist in further space endeavors.

This proposed paper will assist space experts in determining the best next steps in the development of deep-space travel and colonization technologies. Preliminary research has identified several key problems associated with establishing space colonies. They are as follows: …

Microgrids: Resilience, Reliability, And Market Structure, Saeed Dehghan Manshadi

Electrical Engineering Theses and Dissertations

This dissertation addresses several challenges corresponding to the operation and planning of microgrids in distribution networks including the formation, energy supply resilience, the contribution of microgrids in the short-term and mid-term operation of bulk power networks and the computational challenges in operation of interdependent infrastructure systems.

An approach to transforming the active distribution network with distributed energy resources into multiple autonomous microgrids is presented in the first section. The distribution network consists of several generation resources and demand entities that could be clustered into autonomous microgrids. Eigen decomposition in the graph spectra of the distribution network is leveraged to determine …

Pid Algorithm Design For Automation Of Eukaryote Fermentation, Madison Mann

Chemical Engineering Undergraduate Honors Theses

Single celled eukaryotic organisms are advantageous in the production of proteins for use in biopharmaceuticals due to their ease of cultivation and manipulation. Because of high cell density during fermentation and an ability to allow post-translational protein modifications, yeast is particularly well-suited. To maximize the specific formation rate of the desired proteins, an optimum specific growth rate of the yeast should be found and maintained. This rate is dependent upon pH, temperature, dissolved oxygen content, and carbon feed rate. Fermentation can be done in a fed batch reactor system, and it is possible to use a Buglab (online biomss) sensor …

Removal Of Carbamazepine From Drinking Water, Jordan Alex Gadberry, Adam Johnson, Juan Rodriguez, Paola Marrero-Rivera, Tom Krumpolc, Zach Wiese

Chemical Engineering Undergraduate Honors Theses

Due to the increasing prevalence of prescription medication over the past few decades, pharmaceuticals have accumulated in various water sources. This has become a public health concern because many pharmaceuticals have limited research on the effects of chronic low-level exposure. According to the World’s Health Organization (WHO), traces of pharmaceuticals products have been reported in different water sources such as surface waters, wastewater, groundwater, and drinking water.^[1] One pharmaceutical of interest that has been detected in water sources is carbamazepine. Carbamazepine (CBZ) is a common pharmaceutical prescribed for the treatment of seizure disorders, neuropathic pain, and various psychological disorders. …

Sulfate Removal From Mine Impacted Waters, Luis Sagarnaga

Chemical Engineering Undergraduate Honors Theses

Woo Pig Sulfate (WPS) has developed two methods for reducing levels of calcium sulfate in mine impacted waters, a “hot process” and a two-stage nanofiltration process. Both processes were designed to treat gypsum saturated water that is currently being pumped via interceptor wells to prevent the spread of a sulfate plume into a nearby community. Each solution was designed for Freeport McMoran’s Sierrita mine in Green Valley, Arizona, which was visited in order to gain insight about the problem. Below 250 ppm on the treated stream, nanofiltration and the hot process achieve overall recoveries of 84 and 99%, respectively. The …

Direct Potable Reuse Of Wastewater, Boyce Bethel

Chemical Engineering Undergraduate Honors Theses

Water is essential to our societies and mankind. Currently, 844 million people across the globe lack access to potable water. By 2025, it is projected that half of the world population will be in a region of water stress.⁵ The water crisis is often thought of as a problem limited to places that have always struggled to have clean water, but it is now affecting new areas such as the southwest United States. With increasing population demands and drought, the feasibility of direct potable reuse (DPR) of wastewater is being considered. According to an EPA report in 2017, there …

Optimizing A System Of Electric Vehicle Charging Stations, Ukesh Chawal

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

There has been a significant increase in the number of electric vehicles (EVs) mainly because of the need to have a greener living. Thus, ease of access to charging facilities is a prerequisite for large scale deployment for EV. The first component of this dissertation research seeks to formulate a deterministic mixed-integer linear programming (MILP) model to optimize the system of EV charging stations, the locations of the stations and the number of slots to be opened to maximize the profit based on the user-specified cost of opening a station. Despite giving the optimal solution, the drawback of MILP formulation …

Osteoprogenitor Cell Adhesion And Growth On The Bioactive Silicon Nitride Surface For Craniofacial Implants Applications, Kamal Awad

Material Science and Engineering Theses - Archive

As a novel biomaterial, silicon nitride (Si3N4) has been used for orthopedic and spinal fusion applications. Its ability to promote continuity for structural support of missing bone, by in/on bone growth, gives it advantageous properties and potential for mandibular and craniofacial reconstruction applications. Yet, the surface properties of this material and its effect on the osteogenic properties have not been fully realized. Thus, the aim of this study was to evidently investigate the surface properties of the bioactive Si3N4 that enhance the calvarial osteoblasts cell adhesion, growth, and differentiation when compared to conventional implant materials such as titanium (Ti) and …

Nature Inspired Technology: A New Process For Silicification Based On Marine Sponges, Ami Atul Shah

Material Science and Engineering Dissertations - Archive

Silica is used in various industries, ranging from automobile industry for tires to semiconductor industry, paints and coatings, biomedical devices & applications to food & drug industry. The current processing techniques for precipitated silica involve harsh conditions like high temperature and extreme pH conditions. Nature already has highly evolved production techniques for silica. They run at physiological conditions and exhibit intricate control over the synthesis, leading to very pure and ornate siliceous structures. These structures exhibit organized architecture at scales as small as nano-dimensions. The proposed research work is a step, towards development of new techniques that bio-mimic the silica …

Investigation Of The Processing-Structure-Property Relationship In Ta-Si-N Nanocomposite Coatings, Anna Zaman

Material Science and Engineering Dissertations - Archive

The present-day industry demands development of coatings for harsh environmental applications which can resist impact and oxidation at high temperatures. It is vitally important to develop new hard (>30 GPa) protective coatings which will be thermally stable at temperatures, T > 800 °C and simultaneously will ensure a good protection of the substrate against oxidation from an external atmosphere. The limitations of conventional coatings due to inferior hardness or poor oxidation stability can be overcome by nanocomposite coatings as they exhibit enhanced and completely new properties. To address this requirement of new enhanced protective systems, there is a need to …

New Mixture Additives For Sustainable Bituminous Pavements, Gabriel Mukristu Nsengiyumva, Kommidi Santosh, Yong-Rak Kim, Helan Xu, Yiqi Yang

Nebraska Department of Transportation: Research Reports

In an effort to improve mechanical properties of asphalt concrete, an exploratory research using mixture additives was attempted. Two different types of additives on two material scales were used: asphalt concrete (AC) level and binder level. At the start of this study, the effect of natural cornhusk fibers on the resistance of two types of AC mixtures on cracking were tested for hot-mix asphalt (HMA) and cold-mix asphalt (CMA). The results showed slight improvements in cracking resistance in cornhusk reinforced HMA, and in the case of the CMA, marshal flow. Overall, based on the test results, cornhusk-reinforced HMA and CMA …

Optimal Surgical Plating Of Mandibular Angle Fractures: A Validated Finite Element Model, Brett Seeley-Hacker

Wetterhahn Science Symposium Posters 2018

No abstract provided.

Characterization And Selection Of Hydroxyl-Terminated Polybutadiene Polymers For High-Strain Applications, Nathaniel Prine

Honors Theses

Understanding the behavior of hydroxyl-terminated polybutadiene (HTPB) as a composite matrix is imperative for the development of future military and aerospace munition technology. As a vital component of solid rocket fuel, HTPB strongly contributes to the fatigue behavior, burn-rate, and other properties that can cause critical failure of the rocket if not formulated properly. The purpose of this research is to identify traits characteristic of poor-performing HTPB matrices by analyzing two samples labeled as either “good” or “bad” based on their performance as a fuel matrix. Samples were analyzed via 1H NMR and GPC to determine their epoxy content, hydroxyl …

Thiol–Ene Photopolymerization: A Simple Route To Pro-Antimicrobial Networks Via Degradable Acetals (Pandas), William Martin

Honors Theses

The World Health Organization (WHO) has brought the growing epidemic of antibiotic resistance bacteria to the attention of the public and has expressed the need for the development of new methods of defense. In this direction, bioactive aldehyde essential oils have been shown to effectively act as antibiotic and antifungal agents. These bioactive compounds, when used in their pure form, are volatile and lack environmental stability. In this thesis, we describe the synthesis of pro-antimicrobial networks via degradable acetals (PANDAs) using thiol-ene photopolymerization. PANDAs were used as a new model for the high loading and release of bioactive aldehyde-containing compounds …

An Empirical Study On The Recovery Speed Of Usb Flash Drives Utilizing Raid-5 Compared To Hdds And Ssds, Joshua Manuel Martins

Honors Theses

Since their creation and implementation, storage drives have undergone and continue to undergo drastic changes in speed, size, and reliability. The original storage drives, known as hard disk drives (HDDs), are constructed using moving parts. The second modern type of storage drives, known as solid state drives (SSDs), are constructed using a series of silicon chips that utilize no moving parts. The third and most recent innovation in storage drives, known as USB flash drives (USBs), use only a single silicon chip to provide storage which grants them the smallest form factor of the three drive types.

This study compared …

Biocompatible, Responsive Polysoaps Via Raft Copolymerization For The Delivery Of Model Cancer Therapeutics, Mason Dearborn

Honors Theses

Many chemotherapeutic drugs are small, hydrophobic molecules that require water-soluble, biocompatible nanocarriers for enhanced vascular circulation. Existing polymeric carriers either conjugate the drug along a copolymer backbone or sequester drugs within a protected interior domain to be delivered to specific sites in the body. Such therapeutic systems must overcome a myriad of hurdles, beginning with complex, multi-step syntheses, followed by other inherent barriers that limit the efficiency of drug delivery at the targeted site. This work aims to circumvent a number of these issues using biocompatible, stimuli-responsive polysoaps that are capable of unimeric micelle formation, hydrophobic drug delivery, and triggered …

Corner Sealants For Tactical Shelters, Janine Carlita Nowak

Honors Theses

The demand for a lightweight, easy-assembly tactical shelter is high for those faced with unexpected disasters and global conflicts. This project focuses on designing and prototyping the corner sealant for such a shelter. Two materials were chosen and tested: an in-house thermoplastic polyurethane (TPU) and Texin 950. Thermogravimetric Analysis (TGA) was performed on both of these materials. The in-house TPU showed initial degradation at 282.50 °C and sample degradation at 457.45 °C. Similarly, Texin 950 showed initial degradation at 293.68 °C and sample degradation at 453.26 °C. Differential Scanning Calorimetry (DSC) was then run. The crystallization temperature (Tc) was observed …