Engineering Commons^™

Utilizing 3d Printed Analogue Soils To Investigate Specimen Size Effects In Triaxial Testing, Claire Louise Stewart

Graduate Theses and Dissertations

Triaxial testing is one of the fundamental laboratory tests used in geotechnical engineering to determine strength parameters, such as shear strength and friction angle. Investigating the minimum representative elementary volume (REV) can verify the independence of size effects on strength parameters and ensure that the scaled laboratory tests results are consistent, repeatable, and representative of field conditions. Although, REV has been studied for many applications, there is disagreement within geotechnical engineering of a minimum particle diameter to specimen diameter to minimize the size effects related to the REV in consolidated drained (CD) triaxial tests. This research study compared the strength …

Assessing Biofiltration Without Ozonation For Removal Of Trihalomethane Precursors In Drinking Water At The Beaver Water District Drinking Water Treatment Plant, Sana Ajaz

Graduate Theses and Dissertations

Biofiltration without pre-ozonation has the capability to remove natural organic matter (NOM) fractions that serve as precursors of disinfection byproducts (DBPs), which include the four regulated trihalomethanes (THMs) and dichloroacetonitrile (DCAN). Rapid small-scale column tests (RSSCTs) and Pilot Plant filters operated at empty-bed contact times (EBCTs) of 4, 8, and 16 minutes were used to evaluate the performance of nutrient-amended (free ammonia and phosphorus) biofiltration for THM and DCAN precursor removal, as measured using formation potential (FP) tests. NOM surrogates – which include dissolved organic carbon (DOC), specific ultraviolet absorbance (SUVA254) and fluorescence-PARAFAC components – were measured weekly throughout the …

Power Optimization Of Solar Powered Standalone Wireless Sensor System, Rajan Amatya

Masters Theses

Wireless sensor systems are common in applications where harsh environmental conditions or remote locations make it difficult to run wires. Having these sensor systems self-powered is essential as it is difficult for battery replacement. Using solar as an alternative source of energy can be a medium to charge the battery in such scenarios. With an increasing number of portable devices powered by battery; more and more research is focused on low-power design technique. For this thesis, a microcontroller (Texas Instruments MSP432) was used along with a digital sensor (Bosch BME280) to provide temperature, pressure and humidity information, and Wi-Fi module …

Applications Of Passive Solar Energy And Reclaimed Heat From Livestock Manure Decomposition, Naomi Elizabeth Schalle

Honors Theses

One energy intensive part of raising livestock in colder climates is keeping water warm and easily accessible to the animals in the winter. The objective of this project is to increase the sustainability of livestock farms by developing and implementing an energy conservation measure to decrease electric energy usage on the heating of water for livestock in the winter. One thing farmers have in excess is manure, an abundant and renewable resource for the farmers. This project will capitalize on that excess to encourage a creative use of resources often seen as waste, through implementing aspects of sustainability and conservation …

Nonupdating Methods For The Characterization Of Nonlinear Stress-Strain And Delamination Fracture Properties Of Fiber Reinforced Composites, Bastiaan Corstiaan Van Der Vossen

Mechanical and Aerospace Engineering Dissertations - Archive

Efforts to develop strength and life prediction analysis tools for aircraft composite structures have shown a great need to understand the complexity and interaction of failure modes. Many failure models are highly sensitive to transverse nonlinear shear stress-strain and delamination fracture properties, which are notoriously hard to measure. Without proper input parameters, life predictions analyses will not be successful. The objective of this work was to accurately characterize these mechanical properties of carbon fiber reinforced polymer composites through advanced experimental methods. Full-field noncontact deformation measurements using Digital Image Correlation are used to quantify all surface strains components, enabling the design …

Evaporative Hotspot Cooling Of Microprocessors Using Electrowetting On Dielectric (Ewod), Arvind Venkatesan

Mechanical and Aerospace Engineering Dissertations - Archive

The increased use of smart devices and great strides in fabrication technologies have resulted in densely packed electronics. Combined with 3D packaging, high heat uxes have become the norm. The need for advanced thermal management solutions has risen. Most devices based on their load pro le and architecture are susceptible to non-uniformities in heat uxes. These non-uniformities with very high heat uxes are known as hotspots. Mitigation of hotspots is very important for the normal functioning and long term reliability of microprocessors. Multiple attempts have been made at developing microscale thermal solutions. Most prominent among them are microchannels and heat …

Design Principles For Large Foil Bearings Based On Scaling Laws: Analyses And Experiment, Srikanth Honavara Prasad

Mechanical and Aerospace Engineering Dissertations - Archive

Gas foil bearings are used for supporting high speed turbomachinery systems. They are characterized by complex physical and thermal interactions between the lubricating fluid and the structural elements. Mathematically, the behavior of such systems is governed by nonlinear partial differential equations and pose substantial computational challenges. However, their potential applications in aerospace systems and power generation systems have renewed research and development efforts aimed at simplifying their design and analyses methods. Commercialization of gas foil bearings in Mega Watt scale applications necessitate the development of simple tools for estimating bearing design parameters such as load capacity, radial clearance, and support …

Surface Roughness Formation During Tensile Plastic Deformation Of Nickel Polycrystals, Kranthi Balusu

Mechanical and Aerospace Engineering Dissertations - Archive

Understanding the formation of surface roughness could help better diagnose a metal component’s health and could potentially help in making better microstructure design decisions. Both of these, in turn, contribute to the design of efficient structural components. In this work, the research objective is to understand the relationship between the surface microstructure (i.e., grain orientations) and the surface-height changes in nickel polycrystals undergoing small amounts of tensile plastic deformation. The secondary objective is to determine the relationship between surface height and strain localization. Primarily simulations were used, along with experimental surface roughness observations, to validate the simulation results. Discrete dislocation …

Performance Modeling And Experimental Investigations Of Rotating Detonation Engines, Andrew Ryan Mizener

Mechanical and Aerospace Engineering Dissertations - Archive

The rotating detonation engine (RDE) is a promising propulsion concept that has the potential to offer increased thermodynamic performance in a compact package with no moving parts. A series of analytical and experimental investigations was carried out on RDEs with the joint goal of investigating swirl, torque, and a range of other design parameters of interest. The model and experimental facility were then applied to related problems with the goal of advancing the understanding of RDE applications. A flexible, low-order, semi-empirical model for a rotating detonation engine was presented. The model was formulated to be able to run broad parametric …

Direct Numerical Simulation Of Homogeneous Isotropic Turbulence - A Methodology And Applications, Sarah Moussa Hussein

Mechanical and Aerospace Engineering Dissertations - Archive

Turbulence has been a topic of scientific research for years. Characterized by unorganized chaotic motion and irregular fluctuations, it persists as one of the most challenging topics in fluid mechanics despite volumes of documented research and crucial findings. This begs the question: What is turbulence and why is it so challenging? Turbulence research studies cover a wide spectrum of branches from fundamental flow propagation to different turbulence interactions. This research project investigates the simplest class of turbulent flow studies, homogeneous isotropic turbulence. In a quest to advance the fundamental understanding of turbulence physics, a direct numerical simulation tool is developed. …

Observation Of The Interaction Between A Transonic Shock Wave And A Wingtip Vortex||, Troy T. Bushmire

Mechanical and Aerospace Engineering Theses - Archive

The present study observes the interaction between two fundamental phenomena in fluid mechanics: the transonic shock wave and the wingtip vortex. While these are two areas of fluid mechanics in which extensive experimental and numerical research has been conducted, there is little information on the interaction between the two. The present study numerically simulates a wing with a NACA-0012 section at Mach 0.758 and observes the interaction between the transonic shock wave and wingtip vortex for various angles of attack. The focus of the study is on the surface flow topology and the flow exterior to the boundary layer. Results …

Reachable Set Computation And Analysis For Perturbed Linear Systems, Prabhjeet Singh Arora

Mechanical and Aerospace Engineering Theses - Archive

Determination of the set of all possible states, which a system can attain, plays an important role in safety for critical application. Prior knowledge of this set for the complete run-time provides critical information about how a system may evolve, providing accurate information of all the states, which could violate constraints. The knowledge of these states, helps in estimating control input, which can control the system, such that, these states are eliminated from the reachable set. Computation of reachable set of a dynamic system for a set of initial conditions can be easily performed, provided the analytical solution of the …

An Analytical Design Of Experiments Method For Fatigue Constrained Design Optimization Of A 3d Printed Structure, Ashish Pokharel

Mechanical and Aerospace Engineering Theses - Archive

A design of experiments approach has been used to analytically determine a low cycle fatigue (LCF) constraint for use in design optimization of 3D printed structures. In context of metal additive manufacturing, the process of melting, solidification and consolidation of metal powder introduces very high temperature gradient field within the build which in turn results in high compressive stresses at the core and tensile stresses at the outer surface of the part after it has cooled down to room temperature post build. An approach of finite element modeling in ANSYS Additive has been used to develop a residual stress profile …

Sensor Tasking For Satellite Tracking Utilizing Observability Measures, Mitchel T. Mcdonald

Mechanical and Aerospace Engineering Theses - Archive

In this thesis, novel observability-measure based sensor tasking methods are studied for satellite tracking applications. The tasking is performed by first computing the Hellinger Distance between ground/space based sensors and space objects, and then the measure is utilized for selecting the sensors that maximize observability. Several other measures such as the Fisher Information Gain, Largest Lyapunov Exponent, and Shannon Information Gain have also been utilized and the performance of these measures are computed against each other. The object's state estimates are obtained using nonlinear estimation techniques. The Extended Kalman Filter, Unscented Kalman Filter, and Bootstrap Particle Filter are compared within …

Design And Development Of Flexible Mems-Based Ph Sensor For Agricultural And Biomedical Applications, Shardul Sonu Pawar

Mechanical and Aerospace Engineering Theses - Archive

The purpose of this study is to demonstrate a novel method of using a flexible MEMS-based pH sensor for agricultural and biomedical applications. The first part of the thesis involves demonstration of the capability of our pH sensor for monitoring pH level change in the food product. The pH sensor we have developed consists of Iridium Oxide (IrOx) and Silver Chloride (AgCl) sensing electrodes. The sensor is designed to monitor and sustain long-term continuous usage, which makes it suitable for a wide variety of agricultural based applications. The electrochemical potential generated between IrOx and AgCl electrode is monitored and further …

Enhancing Tensile Strength Of Fdm Parts Using Thermal Annealing And Uniaxial Pressure, Rhugdhrivya Rane

Mechanical and Aerospace Engineering Theses - Archive

Additive manufacturing has been a revolutionary and disruptive technological development in the field of design and manufacturing with Fused deposition modelling (FDM) being at the forefront of this technology. But it is seen that parts printed using FDM suffer from an inherent deficiency of weak tensile strength in the out of plane direction (z-direction) thus limiting their application. This issue of weak z-direction strength is due to the weak Inter-bead bond strength of adjacent polymer interfaces. The purpose of this work is to increase this Inter-Bead bond strength thus increasing the overall tensile strength of the part. In this work, …

Inducing Vibro-Tactile Sensation At Mesoscale, Sudip Hazra

Mechanical and Aerospace Engineering Theses - Archive

Haptics, the feeling of touch, has primarily been used to provide a person a general sensation such as vibration using a joystick or cellphone. But haptics has gradually developed to a stage where it is investigated for virtual and augmented reality environments. Vibro-tactile based feedback is a modality employed to provide a more realistic and localized sensation. This research focuses primarily on providing vibro-tactile feedback at the mesoscale level on the fingertips. A research platform for mesoscale vibro-tactile feedback has been investigated and developed. The software is based on LabVIEW and could generate a number of different and distinct waveform …

Thermodynamic And Phase-Field Analysis Of Domain Structures And Switching Kinetics Of Bismuth Ferrite Thin Films, Ryan T. Hart

Material Science and Engineering Theses - Archive

In this study, thermodynamic analysis and phase field simulation are utilized to study the polarization, phase transitions, and phase coexistence in BFO thin films. The effect of temperature, substrate strain, and electrical bias on the phase stability and the phase transformation pathways were studied. Existing thermodynamic analysis methods are supplemented by a phase destrain model, which determines free energy minima as a function of biaxial strain and the fractions of BFO’s ferroelectric phases in a thin film. The results of this methodology are compared with phase field modeling. The phase de-strain model shows reasonable accuracy in determining boundaries at which …

Rational Design And Synthesis Of Biodegradable Polyurethane Based Biomaterials, Cancan Xu

Bioengineering Dissertations - Archive

Biodegradable polyurethanes have been applied in biomedical field since 1960s. In recent years, biodegradable polyurethanes have been widely investigated for tissue repair and regeneration because of their good mechanical properties, elasticity, biodegradability, biocompatibility and processability. Compared with some commonly used biodegradable polymers, such as poly(glycolide) (PGA), poly(lactide) (PLA), poly(ε-caprolactone) (PCL) and polyhydroxyalkanoates (PHA), the favorable aspects of biodegradable polyurethane are its mechanical, physicochemical and biological properties can be tailored by varying the three blocks in polyurethane backbone, diisocyanate, diol and chain extender. In this thesis, we focus on the development of different functional biodegradable polyurethanes to study their structure-property relationships …

Stimuli-Responsive Nanoparticles For Treatment Of Lung Cancer, Roshni Iyer

Bioengineering Dissertations - Archive

Despite extensive research and progress in anti-cancer therapeutics, an effective treatment for non-small cell lung cancer (NSCLC) remains elusive, resulting in poor 5-year patient survival rate. Towards this end, we have explored a therapeutic regimen to improve the effects of local concurrent chemo-radiation-therapy (CRT), by utilizing multifunctional stimuli-responsive nanoparticles (NPs) as drug carriers. We have also utilized lung cancer targeting strategies for site-specific drug delivery, mainly antibodies against the Ephrin-transmembrane receptor kinase (EphA2), that is over-expressed mainly on lung cancer cells, to promote the targeted delivery of drugs to only cancer cells, and eventually reduce the toxicity to healthy tissues. …

Development Of Particle Platforms For Delivery Of Angiogenic Reagents To Treat Peripheral Arterial Diseases, Duong Quang Le

Bioengineering Dissertations - Archive

Peripheral arterial disease (PAD) is a disease that one or several peripheral arteries are narrowed or blocked. PAD is an emerging disease that cost annually 10-20 billions of US dollars for health care in America. PAD patients suffer high risk of limb loss, amputations and mortalities. At 5 years, the amputation rate for PAD is 40%-70% while the 5-year survival rate is less than 30%. For PAD patients undergoing acute and critical limb ischemia, surgery bypass and endovascular balloon/stenting are applied as standard treatments. However, surgical bypass is subject to patients’ readiness of autologous veins and the depth of arteries …

Laboratory And Field Study Of A Liquid Ionic Soil Stabilizer, Sandesh Gautam

Civil Engineering Theses - Archive

Chemical stabilization of expansive soil has been practiced for quite a time now. The use of lime/cement stabilization as a traditional method has been well acknowledged, understood and standard guidelines for practice have been developed. However, owing to certain demerits like high production and application cost, environmental impact, durability issues and most importantly incompatibility with high-sulfate soil leading to excessive heaving and swell, there is need to develop alternatives to these stabilizers. Non-traditional stabilizers like ionic soil stabilizer have been used by manufacturers in the past and claimed to effectively reduce the swell-shrink behavior of expansive soil. Undocumented results, the …

Integrating Crash, Hospital, And Roadway Data To Investigate The Effect Of Cable Median Barriers On Injury Severity, Michael D. Singleton, Eric R. Green, William Nicholas Staats, I-Chen Chen

Kentucky Transportation Center Research Report

Executive Summary

• In median-involved crashes, the odds of a police-reported injury were estimated to be 42% lower on road segments with a cable median barrier (CMB) than on road segments with a concrete median barrier, and the difference was statistically significant [odds ratio 0.58, 95% confidence interval (0.43, 0.78)].
• In median-involved crashes, the odds of having an injury severity score of 8 or greater were estimated to be 34% higher on road segments with a CMB than on road segments with a concrete median barrier; however, the difference was not statistically significant [odds ratio 1.34, 95% confidence interval (0.67, 2.66). …

Empathetic Computing For Inclusive Application Design, Kenny Choo Tsu Wei

Dissertations and Theses Collection (Open Access)

The explosive growth of the ecosystem of personal and ambient computing de- vices coupled with the proliferation of high-speed connectivity has enabled ex- tremely powerful and varied mobile computing applications that are used every- where. While such applications have tremendous potential to improve the lives of impaired users, most mobile applications have impoverished designs to be inclusive– lacking support for users with specific disabilities. Mobile app designers today haveinadequate support to design existing classes of apps to support users with specific disabilities, and more so, lack the support to design apps that specifically target these users. One way to resolve …

Design Guidelines Of Profiled Sheet Decking Slab Composite Floor, H M Jagadisha

Manipal Journal of Science and Technology

The components of profiled steel decking slab are profiled steel sheet with normal weight concrete, and minimum reinforcement for shrinkage stresses. Nowadays, composite slabs are becoming popular for high-rise office structures due to faster construction, where the structural requirement for fire protection is at a medium level. However, there are no Indian standard codes of practice available for design principles and guidelines for composite floors with profiled sheeting. In this paper, a design guideline for profiled steel decking composite slab is proposed with limit state approach, as per Indian standard.

Performance Of A Wind Torch Under Varying Test Conditions, Sumukh Surya

Manipal Journal of Science and Technology

In an earlier effort, feasibility and proof of the concept for generating wind power to provide a torch-light for cyclists was reported. Performance of the device was proved in a low-speed wind tunnel at the National Aerospace Laboratories, Bangalore. In order to achieve a sufficient confidence level in the performance and assess the reliability of the device, it is essential and desirable to verify the performance in another test facility. Therefore, tests were repeated in the low-speed wind tunnel at the Manipal Institute of Technology. It was found that the device underperformed in the latter, apparently due to the reduced …

A Note On Algebraic Structures, Kuncham Syam Prasad

Manipal Journal of Science and Technology

In this paper, we introduce the idea of 2-Banach algebra and 2-C*-algebra with suitable examples and some related results are established. We provide the recent developments and related results in near-algebra. We also give a generalization of gamma nearring and a module over a gamma nearring with suitable illustration.

Detection Of Multiple Flaws In Concrete Bridge Decks Using Ultrasonic Wave Propagation, Ece Erdogmus, Eric Garcia, Michael Schuller, Donald Harvey, Kelsey Stithem, Monica Houck

Nebraska Department of Transportation: Research Reports

No abstract provided.

Offset Right-Turn Lanes On State Highway Systems, Aemal J. Khattak, Yashu Kang

Nebraska Department of Transportation: Research Reports

This research focused on two aspects related to Offset Right Turn Lanes (ORTLs) on Nebraska state highway two-way stop-controlled intersections. The first was the crash safety and economic benefits of ORTLs compared to intersections with no right turn lanes or traditional right turn lanes. The second was driver stopping behavior at stop signs at two-way stop-controlled intersections equipped with ORTLs. The research team reviewed information from various published studies, analyzed crash data reported at 47 two-way stop-controlled intersections as well as collected and analyzed driver stopping behavior at six ORTLs in Nebraska. Traffic volume and reported crashes during 2012-2015 were …

Structural Safety Of Bridge Decks With Variable Rebar Cover, Prem Egade

Civil Engineering Theses - Archive

Construction defects are common and are difficult to avoid completely. This arises due to improper workmanship, inspection, drawing and specification. On bridge decks, achieving the desired cover is necessary since inadequacy can cause accelerated corrosion in steel and for the most part spalling and delamination which ultimately led to failure. Tolerance provided by different standards and specification also restrict the amount of rebar. So, construction is more focused on increasing cover undermining the loss of strength as consequence. The objective of this research is to check the safety of decks by analyzing bridges for reduction in capacity due to cover …