Engineering Commons^™

Recent Process In Transition-Metal-Oxide Based Catalysts For Oxygen Reduction Reaction, Yao Wang, Zi-Dong Wei

Journal of Electrochemistry

Transition metal oxides (TMOs) based catalysts have become the most promising catalysts to be employed in anion exchange membrane fuel cell for the sluggish oxygen reduction reaction (ORR). However, their ORR activity is still far from that of the Pt-based catalysts. Therefore, it is important to develop high performance TMO based catalysts. Electrical conductivity and intrinsic activity have been regarded as the two keys to affect the ORR activity of the TMOs based catalysts. In this review, we focused on the recent progresses in the fundamental viewpoints on the electrical conductivity and intrinsic activity of the TMOs based ORR catalysts. …

Preparation Of Nanoprobes And Their Possible Applications In Nanoscale Scanning Electrochemical Microscopy For Studying Electrocatalytic Oxygen And Hydrogen Reactions, Xing-Xing Chen

Journal of Electrochemistry

Scanning electrochemical microscopy (SECM) is a type of scanning probe microscopy, which can not only provide the topographical information, but also offer the electrochemical properties of different samples. The interrelationship of physical and electrochemical properties of a sample can be searched at a high-resolution scale due to the introduction of ultramicroelectrode (UME). With the continuous development of modern nanotechnology, the SECM probe has been improved with drastically decreasing its size down to nanometer. Meanwhile, to evaluate and understand the electrochemical performance of various electrocatalysts for both oxygen and hydrogen reactions with high-efficiency is highly demanded in the research area of …

Recent Advances In Continuous Models Of Electrochemical Supercapacitors, Hao-Tian Lu, Jing-Hong Zhou, Guang-Hua Ye, Xing-Gui Zhou

Journal of Electrochemistry

Electrochemical capacitors (supercapacitors) have been developed as a new type of energy storage device with high energy and power densities, which have the advantages of both fast charging-discharging as traditional capacitors and high energy density as batteries. Notable improvements in their electrochemical performance have been achieved in recent years owing to the recent advances in understanding of charge storage mechanisms and the development of advanced nanostructured materials. Recently, modeling and simulation of these supercapacitors has been applied as a useful approach to better understand the working mechanisms of the supercapacitors by describing the concentrations and electric fields inside the capacitors. …

Recent Advances In Non-Noble Metal Nanomaterials For Oxygen Evolution Electrocatalysis, Dan-Dan Zhao, Nan Zhang, Ling-Zheng Bu, Qi Shao, Xiao-Qing Huang

Journal of Electrochemistry

Hydrogen is a kind of renewable energies with the merits of environmentally friendly, abundance and high weight energy density, which can replace the fossil energy. The electrolysis of water is regarded as the most effective way to generate hydrogen. Owing to the sluggish kinetics and large overpotential of the anode oxygen evolution reaction (OER), the efficiency of the cathode hydrogen evolution reaction is greatly limited. Therefore, it is highly desirable to explore efficient, stable and low cost electrocatalysts to reduce the overpotential of OER and improve the efficiency of hydrogen evolution. Based on the natural characteristics of non-noble metal catalysts …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• ME Faculty Member Helps Plan REU Symposium in Alexandria

The Effects Of Antigen Size, Binding Site Valency, And Flexibility On Fab-Antigen Binding Near Solid Surfaces, Thomas A. Knotts, Derek B. Bush

Faculty Publications

Next generation antibody microarray devices have the potential to outperform current molecular detection methods and realize new applications in medicine, scientific research, and national defense. However, antibody microarrays, or arrays of antibody fragments (“fabs”), continue to evade mainstream use in part due to persistent reliability problems despite improvements to substrate design and protein immobilization strategies. Other factors could be disrupting microarray performance, including effects resulting from antigen characteristics. Target molecules embody a wide range of sizes, shapes, number of epitopes, epitope accessibility, and other physical and chemical properties. As a result, it may not be ideal for microarray designs to …

Recent Progress In Organic Redox Flow Batteries, Li-Xing Xia, Hao Liu, Lin Liu, Zhan-Ao Tan

Journal of Electrochemistry

Redox flow batteries (RFBs) are promising candidate for balancing instability of grids caused by integration of intermittent renewable energies such as solar energy and wind energy. Along with wide deployments in solar energy and wind energy due to abundance and declining installation cost, it can be predicted that RFBs will enter a period of rapid development. Basically,RFBs are electrochemical energy storage devices that decouple energy and power of the system by storing liquid electrolyte in tanks outside battery system itself. Such a unique framework makes RFBs flexible and fulfills the various demands of grids. During battery operation, redox-active species are …

The New Application Of Battery-Electrode Reaction: Decoupled Hydrogen Production In Water Electrolysis, Yuan-Yuan Ma, Zhao-Wei Guo, Yong-Gang Wang, Yong-Yao Xia

Journal of Electrochemistry

Hydrogen has been considered as a promising alternative to unsustainable fossil fuels because of its high calorific value, clean and abundant resources. Water electrolysis combined with renewable energy is regarded as the best way for hydrogen production, which will become the foundation of future hydrogen economy. For the past few years, many efforts have been employed to develop the cheap and high-performance catalyst for hydrogen evolution reaction and oxygen evolution reaction. However,the coupled hydrogen and oxygen evolution and the use of the expensive membrane have greatly restricted the flexibility of the conventional water electrolysis, and hindered the utilization of renewable …

Design Strategies Toward Highly Active Electrocatalysts For Oxygen Evolution Reaction, Tang Tang, Wen-Jie Jiang, Shuai Niu, Jin-Song Hu

Journal of Electrochemistry

Electrocatalytic water splitting is pivotal for efficient and economical production of hydrogen and oxygen gasses. However, the efficiency of the whole device is largely limited by the oxygen evolution reaction (OER) at the anode due to its sluggish kinetics. Thus, it is imperative to develop inexpensive, highly active OER catalysts to lower the reaction barriers. By examining the underlying critical factors for OER performance, this review outlines general principles for designing efficient nanosized OER catalysts, including (1) enhancing the intrinsic activity of active site by electronic modulation, crystallinity modulation, phase control, defect engineering and spin state engineering; (2) designing appropriate …

Research Progresses In Improvement For Low Temperature Performance Of Lithium-Ion Batteries, Yue-Ru Gu, Wei-Min Zhao, Chang-Hu Su, Chuan-Jun Luo, Zhong-Ru Zhang, Xu-Jin Xue, Yong Yang

Journal of Electrochemistry

Lithium-ion batteries (LIBs) have become a new research hotspot due to their high energy density and long service life. However, the temperature characteristics, especially the poor performance at low temperatures, have seriously limited their wider applications. In this report, the research progresses in the low temperature performance of LIBs are reviewed. The main existing limitations of LIBs at low temperatures were systematically analyzed, and followed by discussion on the recent improvements in low temperature performances by developing novel cathode, electrolyte, and anode materials. The developments for improving the low temperature performance of LIBs are prospected. The three most important factors …

An Investigation On The Structure Of Au(111)/Imidazolium-Based Ionic Liquid Interface: Effect Of Alkyl Side Chain Length, Li Chen, Shuai Liu, Mian-Gang Li, Jian-Jia Su, Jia-Wei Yan, Bing-Wei Mao

Journal of Electrochemistry

In this work, we comparatively investigated the interfacial structures at Au(111) electrode surfaces in two ionic liquids (ILs) with different alkyl chain lengths by combining AFM force curve technique and electrochemical methods. The number and stability of the layering structures, and their potential-dependency were analyzed. The experimental results indicated that the tendencies of force-potential curves in the two ILs behave the same way. At potentials close to PZC, the ions arrange loosely, which lowers the stability of the layering structure. As the potential shifting away from PZC, more ions attach to electrode surface, which increases the stability of layering structure, …

Synthesis Of Keggin Polyoxometalates Modified Carbon Paste Electrode As A Sensor For Dopamine Detection, Peng-Fei Dong, Na Li, Hai-Yan Zhao, Min Cui, Cong Zhang, Ju-Jie Ren, Xue-Ping Ji

Journal of Electrochemistry

Polyoxometalates, a class of anionic clusters with structure diversity and size variability, make them very attractive in many fields such as electrochemistry, catalysis and medicine. The Co(C₁₅N₆H₁₂)₂[PW₁₂O₃₈]·5H₂O(Co[PW₁₂O₃₈]) modified carbon paste electrode was prepared in this work, and its electrochemical performances as the sensor for dopamine detection were characterized with electrochemical impedance spectroscopy, cyclic voltammetry and differential pulse voltammetry. The preparation conditions and test conditions were optimized respectively. Under the optimized conditions, the POMs modified carbon paste electrode exhibited good selectivity and sensitivity …

Effects Of Sulfur-Containing Additive On Low Temperature Performance Of Graphite Anode, Ze-Li Wu, Ye-Zhen Zheng, Zhong-Ru Zhang, Yong Yang

Journal of Electrochemistry

The low temperature performance of lithium ion battery mainly depends on the graphite anode, and one of the research focuses is to improve the low temperature performance of the anode by additives. In this paper, the effects of different sulfur-containing functional groups such as DTD (ethylene sulfate), 1,3-PS (1,3-propane sultone) and ES (ethylene sulfite) on low temperature performances of artificial graphite materials were systematically studied. The results in density functional theory (DFT) calculations, cyclic voltammetry (CV), scanning electron microscopy (SEM) and charge-discharge measurement clearly demonstrated that all three sulfur-containing additives could participate in formation of films on the surface of …

Electrodeposition Of Cobalt From Eutectic-Based Ionic Liquid, Rostom Ali M., Sankar Saha S, Ziaur Rahman Md

Journal of Electrochemistry

The electrodeposition of cobalt from a solution containing cobalt chloride in either a urea-choline chloride based or an ethylene glycol (EG)-choline chloride based ionic liquid has been carried out onto copper and steel cathodes by constant current and constant potential methods at different temperatures. The influences of various experimental conditions on electrodeposition and morphology of the deposited layers have been investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD)technique. It has been shown that the smooth, shiny with good adherence and bright metallic coloured cobalt coatings were obtained from both urea and EG based ionic liquids at the applied …

Cloud Oriented Additive Technology Use For Fast Prototype Development, Betim Shabani, Vladimir Dukovski

UBT International Conference

Digitalization has already affected every segment of the industry and especially manufacturing. Based on market requires that are more specific and faster than ever, there is a need to use some of the online platform packages called Cloud Manufacturing (CM). CM operate through the digital data then here comes the expression CAD models or in particular STL files that are currently adequate for Additive Technologies (AT). On the other hand, there is a rapid increase in the measurement aspects via non-contact forms (3D scanners) where their data are stored in various digital formats: IGES, OBJ, PLY, etc.). Those formats can …

The Importance Of Cad/Cae Systems In Development Of Product Design And Process Of Optimization, Fatmir Azemi, Xhemajl Mehmeti, Bekim Maloku

UBT International Conference

Computer Aided Design (CAD) and Computer Aided Engineering (CAE) are the most important technology tools that today designers are using in development of product (design and in process of optimization). Thus, this study is carried out to present the importance of CAD/CAE system on process of design and process of optimization of spur gear. The paper presents the usage of CAD system for modeling parts and CAE software for analysis of stress-strain of spur gear and the results of calculation of pair spur-gears that it used in the gearbox transmission of the bucket wheel excavator located in “Bardhi i Madh …

Adaptation Of Wood Processing Engineers To New Technologies, Ramadan Topuzi, Arben Bejtja

UBT International Conference

New technologies have recently got a rapid and wide spread. They consist of softwares, systems and advanced engineering machinery, but not limited to these. In the furniture manufacturing industry they have found a wide application for their own specific nature. Wood Processing Engineers, given their university education, have a very important role applying their knowledge in the use of technologies. Today CAD CAM systems are becoming part of furniture design and manufacturing through digitally commanded machineries. The problem faced is the qualified staff for the use of these systems and machineries. This requires scientific preparation and training of specialists on …

Investigation Of Production Of Brick With Waste Coal Powder Additive, Mehmedi Vehbi Gökçe, Semiha Akçaözoğlu, Besian Sinani

UBT International Conference

Wastes in coal quarries and coal power plants are significant issues. Coal washing plant tailings as waste coal powder is one of these issues. Today, their ecological and economical utilization, control and management are of main subjects for ongoing researches throughout the world. On the other hand, researchers still carry out intense investigations on the production of lightweight and sustainable products for construction industry. In Turkey, approximately 20 coal mines and 1 coal power plant do have coal washing plant. In this study, waste coal powder obtained from Soma, Manisa were replaced with clay obtained from Niğde Kolsuz Region in …

Multithreading Technique Improvement In Processing Client Server Communication By Utilizing Object Oriented Language, Eda Tabaku, Kliv Shapllo, Senada Bushati

UBT International Conference

A comparison of an application’s performance, when a program is executed through multiple threads and only a thread to complete a specified task by using Java techniques. In this paper will be expounded how a Java programmer can profit by technology facilities. How to create a program that executes in a parallel way, that solves independent tasks not one after the other, but all at the same time. The application that is developed(the environment used is Eclipse) aims to speed up the time needed to download images from a specific website, but it is flexible for downloading images also from …

Performance Analysis Of Java Persistence Api Providers, Besart Pllana

UBT International Conference

Nowadays, fast and accurate access to data is very important. Usually data is managed and processed through software applications. In recent years, the most preferred programming model by most application developers is Object Oriented Programming (OOP) where data is represented through objects. These data must be persistent and therefore needs to be stored, and storage can be done on a variety of databases. The most common databases are Relational Database Management Systems (RDBMS). While persistence of objects in RDBMS is limited by object-relational mismatch which is the inconsistency of the direct interaction between two components based on different approaches, OOP …

The Moving Object Reflected Under Matlab Test-Bench (Simulation Model Through Buit-In Functions), Virtyt Lesha, Jozef Bushati, Dea Strica

UBT International Conference

Digital image processing is an area that finds many applications in three-dimensional graphics. One of the subjects considered in image processing is detection of moving objects. In this paper, we have analyzed the performance of an algorithm that detects a moving object. The performance relates to the speed of moving object during a pre-determined time interval. The methodology supports Matlab integrated with built-in functions. Specifically, as input of the simulation model is a video material containing moving objects. The model reads a video file presenting moving objects; after the model is executed in Matlab, the output emits moving objects associated …

Designing A Controller Via Simulated Annealing, Zemerart Asani, Selvet Rexhepi

UBT International Conference

With Proportional-Integral-Derivative (PID) controllers being widely used in industry for optimum solutions. Optimization of the PID controller is an important problem in Control Engineering. Therefore, in this paper work we have implemented Simulated Annealing to tune the controller parameters. Optimizing the controller parameters on the basis of the Simulated Annealing algorithm, based on criteria defined using an objective function, allows us to find optimal solutions for the controller parameters that give us minimum error. In terms of performance, the PID controller designed with Simulated Annealing gives us great results with regard to the rise time, settling time, overshoot and steady-state …

Nb-Iot: A Network Slice For Massive Iot, Xhafer Krasniqi

UBT International Conference

Network virtualisation is a concept that has been around for some time now, but the concept of network slicing is more recent and only started to be mentioned in the context of 5G. In essence, network slicing is a specific form of network virtualisation that enables sharing of physical resources by multiple logical network slices used to serve different applications and use cases. One such a use case would be to allocate network resources to small things, e.g. sensors and very low power consumption objects. To allow these small objects access to network resources or to a slice of such …

Small-Scale Physical Modelling Of Slope Failures In Sands, M. Tasevska, B. Susinov, J. Josifovski

UBT International Conference

This paper deals with small-scale physical and numerical calculation of slope stability. The aim is to define the critical slope angle at which failure occurs. The slope is constructed from material used in tailings dam construction. Many laboratory tests have been made to determine the physical and mechanical properties of the soil. The analyzed results show that the material is classified as silty sand. The first physical model refers to infinite slope with 45° slope angle under loaded conditions which represent an upslope extension. The second model wasn’t subjected to an external load, but raised upward to increase the slope …

Water Losses Management In Mitrovica Region, Faruk Hajrizi, Izet Ibrahimi

UBT International Conference

The purpose of this paper is to reduce water losses by presenting the unregistered customer situation, the number and where they are mainly distributed. In the context of analyzing the commercial and technical losses of the water in the Mitrovica region, a project for the reduction of water losses was devised. Financial support for project realization is ensured by the project funded by the Luxembourg Government for the Regional and Water Company Mitrovica, which has enabled to implement a project with significant activities to reduce water losses. During the project development we undertook site visits, field work evaluations were conducted …

Review Of Cloud Migration Strategies And Providers – An Iaas Migration Strategy, Florinda Imeri, Agon Memeti

UBT International Conference

Companies are addressing the Cloud Computing issue more actively recently, as a part of a move towards a more agile and flexible IT infrastructure since benefitting from an IT infrastructure that is flexible, scalable, high-performance and up-to-date is no longer a luxury or the exception to a rule. The issue they address is “Which is the best strategy?” Of course, this is not a simple issue given that the cloud can impact an organization’s application picture across several dimensions. When an organizations made the decision to consider cloud services for its application or infrastructure deployment, it’s important to understand the …

Simulation Based Optimisation Of Ground Crews: Case Of A Regional Airport, Blaz Rodic, Alenka Baggia

UBT International Conference

Paper presents the simulation models built within an airport ground crew scheduling automatization project at a regional airport. Our goal was to develop robust ground crew task scheduling and shift generation algorithms that would improve on existing heuristic rules. We have utilized simulation modeling to develop and validate the algorithms, starting with a model of the existing scheduling process coded and visualized in spreadsheet software and ending with a hybrid Discrete Event and Agent Based model used for the visualization and verification of the optimized processes. Explicit and tacit expert knowledge was recorded through meetings with airport personnel managers and …

The Relationship Between Teamwork Knowledge And Teamwork Behavior, Jeeun Yi, Glenn E. Littlepage

River Cities Industrial and Organizational Psychology Conference

Many organizations utilize a team-focused work structure in the workplace. Researchers have studied how working as a team can improve organizational outcomes such as productivity and employee satisfaction (Katzenbach & Smith, 1993). However, not all teams make positive outcomes (Hackman, 1998). Previous research has shown that effective teamwork can facilitate group and organizational effectiveness (Salas, Stagl, Burke, & Goodwin, 2007). Various models of teamwork process have been developed (Marks, Mathieu, & Zaccaro, 2001; Rousseau, Aube, & Savoie, 2006; Salas, Sims, & Burke, 2005). A meta-analysis found a consistent relationship between the ten dimensions of teamwork identified by Marks et al. …

An Implementation Of Weighted Least Squares Method In Central Bank Twitter Accounts Grew Prediction, Goran Bjelobaba, Ana Savic, Radosav Veselinovic, Hana Stefanovic

UBT International Conference

This paper presents some advantages of using social media and social networks as an efficient way of Central Banks communication with target audience. The statistics given in this paper presents some leading banks based on number of followers on Twitter in 2018, showing that Indonesia’s Central Bank has more Twitter followers than any other monetary authority, beating out the Banco de Mexico, Federal Reserve, European Central Bank and Reserve Bank of India. In this paper some prediction of number of Twitter followers in Central Bank communication is also contributed, based on Weighted Least Squares method. An algorithm is implemented in …

Efficiency Of Calculating Gcd Through Computer With Help Of Modified Euclidean Algorithm, Emin Emini, Azir Jusufi, Ruhada Emini

UBT International Conference

Euclid’s algorithm remains to be the most efficient method for finding greatest common divisor of two full numbers. By using the meaning of congruences this research paper will make a modification in the note of the Euclid’s algorithm. Here are discussed both classic and modified methods, by putting appropriate codes and observe the duration of the calculation through the computer.