Engineering Commons^™

Verification, Validation And Application Of Shear Stress Transport Transitional Model To A R/C Aircraft, Jon Willems

Doctoral Dissertations and Master's Theses

Accurate numerical prediction of transition onset as well as transition extent is crucial when evaluating the performance of many remotely controlled and autonomous aircraft. The four-equation Menter-Langtry Transitional viscous model in ANSYS Fluent is applied to a number of 2D and 3D airfoils and wings operating within the transitional flow regime, to permit comparison to relevant experimental and numerical results for transition onset, extent, and overall aerodynamic performance. The sensitivity to grid topology and fineness is also examined. With sufficient confidence in the numerical approach, the performance of a well-known high performance R/C glider is examined and compared to results …

Mission Tasking, Path Planning, And System Integration For An Autonomous Surface Vessel, Timothy Zuercher

Doctoral Dissertations and Master's Theses

This thesis presents the design and development of a fully autonomous surface vessel for use as a research platform for the Office of Naval Research and as a competition entry to the International Maritime RobotX Challenge in 2014 and 2016. The author’s contributions to this include the development of safety systems, power distribution systems, communications software, tasking software, and planning algorithms. The results of these developments include a hardware based safety system, a modular power and health monitoring system, an easy to use autoconfiguring inter-process communications stack, a dynamic tasking engine, and a comparison of two solutions to planning with …

Fast On-Line Kernel Density Estimation For Active Object Localization, Anthony D. Rhodes, Max H. Quinn, Melanie Mitchell

Computer Science Faculty Publications and Presentations

A major goal of computer vision is to enable computers to interpret visual situations—abstract concepts (e.g., “a person walking a dog,” “a crowd waiting for a bus,” “a picnic”) whose image instantiations are linked more by their common spatial and semantic structure than by low-level visual similarity. In this paper, we propose a novel method for prior learning and active object localization for this kind of knowledge-driven search in static images. In our system, prior situation knowledge is captured by a set of flexible, kernel-based density estimations— a situation model—that represent the expected spatial structure of the given situation. These …

Design And Prototyping Of A Shape-Changing Rigid-Body Human Foot In Gait, Tanner N. Rolfe

Honors Theses

Traditional ankle-foot prostheses often replicate the physiological change in shape of the foot during gait via compliant mechanisms. In comparison, rigid-body feet tend to be simplistic and largely incapable of accurately representing the geometry of the human foot. Multi-segment rigid-body devices offer certain advantages over compliant mechanisms which may be desirable in the design of ankle-foot devices, including the ability to withstand greater loading, the ability to achieve more drastic shape-change, and the ability to be synthesized from their kinematics, allowing for realistic functionality without prior accounting of the complex internal kinetics of the foot. This work focuses on applying …

Improving Electrochemical Devices Via Increased Charge Density And Ceramic Nanoparticles, George Padavick

Honors Theses

Challenges posed by climate change in conjunction with increasing global energy demand necessitate improved energy systems in both transportation and power delivery. These systems will require more advanced energy storage than current commercially available options. To enhance energy storage capabilities, supercapacitors were investigated to discover new mechanisms, materials, and fabrication techniques for developing electrochemical devices. In particular, methods for improving electrolyte performance were explored to enhance capacitance and conductivity. The results indicate that increasing charge density in the electrolyte via higher salt concentration or higher ionic charge of the solvated ions significantly increases capacitance. Specifically, a 0.1M solution of magnesium …

Design And Prototyping Of A Shape-Changing Rigid-Body Human Foot In Gait, Tanner N. Rolfe

Honors Theses

Traditional ankle-foot prostheses often replicate the physiological change in shape of the foot during gait via compliant mechanisms. In comparison, rigid-body feet tend to be simplistic and largely incapable of accurately representing the geometry of the human foot. Multi-segment rigid-body devices offer certain advantages over compliant mechanisms which may be desirable in the design of ankle-foot devices, including the ability to withstand greater loading, the ability to achieve more drastic shape-change, and the ability to be synthesized from their kinematics, allowing for realistic functionality without prior accounting of the complex internal kinetics of the foot. This work focuses on applying …

Energy-Efficient Fpga-Based Parallel Quasi-Stochastic Computing, Ramu Seva, Prashanthi Metku, Minsu Choi

Electrical and Computer Engineering Faculty Research & Creative Works

The high performance of FPGA (Field Programmable Gate Array) in image processing applications is justified by its flexible reconfigurability, its inherent parallel nature and the availability of a large amount of internal memories. Lately, the Stochastic Computing (SC) paradigm has been found to be significantly advantageous in certain application domains including image processing because of its lower hardware complexity and power consumption. However, its viability is deemed to be limited due to its serial bitstream processing and excessive run-time requirement for convergence. To address these issues, a novel approach is proposed in this work where an energy-efficient implementation of SC …

Spectroscopic Ellipsometry Studies On Zncdo Thin Films With Different Cd Concentrations Grown By Pulsed Laser Deposition, Shuai Chen, Qingxuan Li, Ian Ferguson, Tao Lin, Lingyu Wan, Zhe Chuan Feng, Liping Zhu, Zhizhen Ye

Electrical and Computer Engineering Faculty Research & Creative Works

A set of Zn 1-x Cd x O thin films with different Cd concentrations was deposited on quartz substrates by Pulsed Laser Deposition (PLD). The properties of these films were investigated by variable angle and temperature dependent spectroscopic ellipsometry (SE). The experimental Zn 1-x Cd x O thin films showed a red shift in the absorption edge with increasing Cd contents at room temperature. For ZnCdO films with the similar Cd concentration, it has been found that the film thickness has important effects on the optical constants (n, k). The variations of optical constants (n, k) and the band gap, …

Composition And Temperature Dependent Optical Properties Of Al X Ga 1-X N Alloy By Spectroscopic Ellipsometry, Yao Liu, Qing Xuan Li, Ling Yu Wan, Bahadir Kucukgok, Ehsan Ghafari, Ian T. Ferguson, Xiong Zhang, Shuchang Wang, Zhe Chuan Feng, Na Lu

Electrical and Computer Engineering Faculty Research & Creative Works

A series of Al x Ga 1-x N/AlN/Sapphire films with x = 0.35–0.75 and different thickness of epi-layer were prepared by metalorganic chemical vapor deposition (MOCVD). Spectroscopic ellipsometry (SE) was used to study the temperature-dependent refractive indices and optical bandgaps of the Al x Ga 1-x N films ranging from 300 to 823 K. Parametric semiconductor (PSEMI) models were used to describe the dielectric functions of AlGaN/AlN layers. The fitting results of refractive index, energy bandgap, thickness and surface roughness at 300 K are in good agreement with photoluminescence (PL), scanning electron microscopy (SEM) measurements and the existing literature. Our …

Rapid Characterization Of Local Shape Memory Properties Through Indentation, Peizhen Li, Haluk E. Karaca, Yang-Tse Cheng

Mechanical Engineering Faculty Publications

Shape memory alloys (SMAs) have the ability to show large recoverable shape changes upon temperature, stress or magnetic field cycling. Their shape memory, material and magnetic properties (e.g. transformation temperatures, strain, saturation magnetization and strength) determine their prospects for applications from small-scale microelectromechanical systems to large scale aerospace and biomedical systems. It should be noted that properties of SMAs are highly temperature dependent. Generally, the conventional mechanical characterization methods (e.g, tension, compression, and torsion) are used on bulk samples of SMAs to determine those properties. In this article, it will be shown that indentation technique can be used as an …

Optical Properties Of Organic Carbon And Soot Produced In An Inverse Diffusion Flame, C. Russo, B. Apicella, J. S. Lighty, A. Ciajolo, A. Tregrossi

Mechanical and Biomedical Engineering Faculty Publications and Presentations

The carbonaceous matter (soot plus organic carbon) sampled downstream of an ethylene inverse diffusion flame (IDF) was chemically and spectroscopically analyzed in detail. In particular, the H/C ratio, the UV-Visible absorption coefficient and Raman parameters were measured and found to be representative of a highly disordered sp² -rich carbon as the early soot sampled in a premixed flame. In contrast, the optical band gap was found to be relatively low (0.7eV), closer to the optical band gap of graphite than to that of medium-sized polycyclic aromatic hydrocarbons (>2eV) which are widely considered to be soot precursors and are …

Incorporation Of Catalytic Modalities For Forming Of A Catalytic Cascade, Albert T. Perry Iii

Nanoscience and Microsystems ETDs

This dissertation investigates the novel incorporation of inorganic and enzymatic catalysts. There is little literature on inorganic catalysts operating at biologically relevant pHs and as such a significant amount of this dissertation focuses on determination of catalyst activity. Mn amino-anitpyrene (MnAAPyr), Pt, Pt alloys, Mn-N-C and Pd catalysts on 3D graphene supports(3D-GNS), were explored for activity towards glycerol intermediates: oxalic acid, mesoxalic acid, glyoxalic acid, and formic acid. MnAAPyr was designed to mimic the reaction center of oxalate decarboxylase and oxalate oxidaze, the natural catalyst towards oxalic acid. It showed high activity towards oxalic acid, with onset potentials of 0.714±0.002V …

Development Of Cardiac Atrial Kick Shear Wave Elastography To Assess Myocardial Stiffness, Aaron J. Engel

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Increased myocardial stiffness, which is characteristic of many cardiovascular diseases, leads to a loss of diastolic function and is a cause of diastolic heart failure. Current methods to estimate myocardial stiffness rely on pressure-volume relationships derived from invasive cardiac catheter measurements. Noninvasive methods to estimate myocardial stiffness include ultrasound-based and magnetic resonance-based shear wave elastography, where the stiffness of the tissue is related to the propagation speed of a shear wave. Currently, ultrasound-based cardiac shear wave elastography includes acoustic radiation force based methods; however, the in vivo generation and detection of the shear waves in myocardium is significantly degraded due …

Study Of Defect Coalescence In Heterogeneous Material Systems Using Broad Band Dielectric Spectroscopy., Vamsee Vadlamudi, Muthu Ram Prabhu Elenchezhian, Priyanshu Kumar Banerjee, Rassel Raihan, Kenneth Reifsnider

Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive

Composite materials are essential for many modern applications, including airplanes and cars, energy conversion and storage devices, medical prosthetics, and civil structures. Detecting the initiation, growth, accumulation, and coalescence of micro-damage in these heterogeneous materials and predicting the onset of component failure using conformal Broadband Dielectric Spectroscopy (BbDS) is a promising area of ongoing research. Recently, the authors have developed the critical path concept and Heterogeneous fracture mechanics concept that depicts the effect of defect nucleation, growth, coalescence, and fracture plane development and correlation of these damage mechanisms to change in dielectric response respectively. Current research applies those concepts to …

Optimal Hemoglobin Extinction Coefficient Data Set For Near-Infrared Spectroscopy, Yue Zhao, Lina Qiu, Yunlong Sun, Chong Huang, Ting Li

Biomedical Engineering Faculty Publications

Extinction coefficient (ε) is a critical parameter for quantification of oxy-, deoxy-, and total-hemoglobin concentrations (Δ[HbO₂], Δ[Hb], Δ[tHb]) from optical measurements of Near-infrared spectroscopy (NIRS). There are several different ε data sets which were frequently used in NIRS quantification. A previous study reported that even a small variation in ε could cause a significant difference in hemodynamic measurements. Apparently the selection of an optimal ε data set is important for NIRS. We conducted oxygen-state-varied and blood-concentration-varied model experiments with 57 human blood samples to mimic tissue hemodynamic variations. Seven reported ε data sets were evaluated by comparisons between …

Techno-Economic Implications Of Fed-Batch Enzymatic Hydrolysis, Ellen Emanuel

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

As ethanol production continues to increase in the United States, cellulosic ethanol continues to gain traction as a viable option for meeting ethanol demands. In this work, a literature review of techno-economic analyses for cellulosic ethanol was conducted. It was found that pretreatment methods greatly affect the ethanol production costs. There is a lack of techno-economic data comparing a batch enzymatic hydrolysis to a fed-batch enzymatic hydrolysis for a separate hydrolysis and fermentation production process. Consequently, a techno-economic analysis comparing cellulosic ethanol production using batch versus fed-batch enzymatic hydrolysis was conducted. SuperPro Designer software (Intelligen, Scotch Plains, New Jersey), a …

Highly Compressible Origami Bellows For Harsh Environments, Jared J. Butler

Theses and Dissertations

The use of origami-based bellows is of interest in fields where traditional metal bellows are incapable of meeting compression, mass, or flexibility constraints. Metal bellows are often used in space applications but frequently complicate spacecraft design. Origami-based bellows capable of meeting design constraints while adequately shielding sensitive spacecraft parts may be advantageous to space mechanism design. The design and testing of a highly compressible origami bellows for harsh environments is described. Several origami patterns were evaluated and the Kresling fold pattern was designed to meet constraints and selected for use in the bellows design. Origami bellows were prototyped in five …

A Case Study Of Instructional Methods Used For Private Pilot Certification At Utah Valley University Flight School, Michael Robert Graham

Theses and Dissertations

In this case study, researchers investigated the instructional methods used to train private pilot students at Utah Valley University. Traditional one-on-one individualized learning methods were replaced with cooperative learning methods. Descriptive statistics were used to determine the effectiveness and efficiency of the cooperative learning methods used. Reduced training time, less repeated lessons and a reduced number of flight hours showed that cooperative learning methods were more efficient and a more effective way to train private pilot students at Utah Valley University.

Drained Elastoplastic Solution For Cylindrical Cavity Expansion In K0-Consolidated Anisotropic Soil, Jingpei Li, Weibing Gong, Lin Li, Fang Liu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

This paper presents a semi analytical solution for drained expansion of a cylindrical cavity in K0-consolidated clay. The solution is derived based on the K0-based anisotropic modified Cam-clay model (K0-AMCC), which can properly consider the initial stress anisotropy and the initial stress-induced anisotropy of natural soils. Parametric studies are carried out to investigate the effects of different over consolidation ratios on the growth of plastic zone and cavity pressure, the distributions of the stress components and the specific volume around the cavity, and the effective stress path. The results are compared with the published solution based on the modified Cam-clay …

A Multiscale Modeling Study Of Particle Size Effects On The Tissue Penetration Efficacy Of Drug-Delivery Nanoparticles, Mohammad Aminul Islam, Sutapa Barua, Dipak Barua

Chemical and Biochemical Engineering Faculty Research & Creative Works

Background: Particle size is a key parameter for drug-delivery nanoparticle design. It is believed that the size of a nanoparticle may have important effects on its ability to overcome the transport barriers in biological tissues. Nonetheless, such effects remain poorly understood. Using a multiscale model, this work investigates particle size effects on the tissue distribution and penetration efficacy of drug-delivery nanoparticles.

Results: We have developed a multiscale spatiotemporal model of nanoparticle transport in biological tissues. The model implements a time-adaptive Brownian Dynamics algorithm that links microscale particle-cell interactions and adhesion dynamics to tissue-scale particle dispersion and penetration. The model accounts …

Metabolomic Effects Of Ceo₂, Sio₂ And Cuo Metal Oxide Nanomaterials On Hepg2 Cells, Kirk T. Kitchin, Steve Stirdivant, Brian L. Robinette, Benjamin T. Castellon, Xinhua Liang

Chemical and Biochemical Engineering Faculty Research & Creative Works

Background: To better assess potential hepatotoxicity of nanomaterials, human liver HepG2 cells were exposed for 3 days to five different CeO₂ (either 30 or 100 μg/ml), 3 SiO₂ based (30 μg/ml) or 1 CuO (3 μg/ml) nanomaterials with dry primary particle sizes ranging from 15 to 213 nm. Metabolomic assessment of exposed cells was then performed using four mass spectroscopy dependent platforms (LC and GC), finding 344 biochemicals.

Results: Four CeO₂, 1 SiO₂ and 1 CuO nanomaterials increased hepatocyte concentrations of many lipids, particularly free fatty acids and monoacylglycerols but only CuO elevated lysolipids and …

Classification Of Rest And Active Periods In Actigraphy Data Using Pca, Isaac W. Muns, Yogesh Lad, Ivan G. Guardiola, Matthew S. Thimgan

Engineering Management and Systems Engineering Faculty Research & Creative Works

In this paper we highlight a clustering algorithm for the purpose of identifying sleep and wake periods directly from actigraphy signals. The paper makes use of statistical Principal Component Analysis to identify periods of rest and activity. The aim of the proposed methodology is to develop a quick and efficient method to determine the sleep duration of an individual. In addition, a robust method that can identify sleep periods in the accelerometer data when duration, time of day varies by individual. A selected group of 10 individual's sensor data consisting of actigraphy from an accelerometer (3-axis), near body temperature, and …

Energy Consumption Modeling Of Stereolithography-Based Additive Manufacturing Toward Environmental Sustainability, Yiran Yang, Lin Li, Yayue Pan, Zeyi Sun

Engineering Management and Systems Engineering Faculty Research & Creative Works

Additive manufacturing (AM), also referred as three-dimensional printing or rapid prototyping, has been implemented in various areas as one of the most promising new manufacturing technologies in the past three decades. In addition to the growing public interest in developing AM into a potential mainstream manufacturing approach, increasing concerns on environmental sustainability, especially on energy consumption, have been presented. To date, research efforts have been dedicated to quantitatively measuring and analyzing the energy consumption of AM processes. Such efforts only covered partial types of AM processes and explored inadequate factors that might influence the energy consumption. In addition, energy consumption …

Reward/Penalty Design In Demand Response For Mitigating Overgeneration Considering The Benefits From Both Manufacturers And Utility Company, Md Monirul Islam, Zeyi Sun, Cihan H. Dagli

Engineering Management and Systems Engineering Faculty Research & Creative Works

The high penetration of renewable sources in electricity grid has led to significant economic, environmental, and societal benefits. However, one major side effect, overgeneration, due to the uncontrollable property of renewable sources has also emerged, which becomes one of the major challenges that impedes the further large-scale adoption of renewable technology. Electricity demand response is an effective tool that can balance the supply and demand of the electricity throughout the grid. In this paper, we focus on the design of reward/penalty mechanism for the demand response programs aiming to mitigate the overgeneration. The benefits for both manufacturers and utility companies …

A General Algorithm For Assessing Product Architecture Performance Considering Architecture Extension In Cyber Manufacturing, Md Monirul Islam, Zeyi Sun, Cihan H. Dagli

Engineering Management and Systems Engineering Faculty Research & Creative Works

In modern manufacturing, the product architecture design options are usually restricted to those that can be produced with 100% confidence using those proven technologies to satisfy the existing customer requirement. As a result, the inefficiencies of architecture design are considerable due to such limitations. This issue is of particular interests in cyber manufacturing when exploring the tradeoff between generality and feasibility in product design and manufacturing. It can be expected that the improvement and extension of the existing product architecture may be required to meet new customer requirement when new technologies become available. An effective system performance assessment algorithm is …

Analysis Of Autonomous Unmanned Aerial Systems Based On Operational Scenarios Using Value Modelling, Akash Vidyadharan, Robert Philpott Iii, Benjamin J. Kwasa, Christina L. Bloebaum

Engineering Management and Systems Engineering Faculty Research & Creative Works

In recent years, the use of UAS (Unmanned Aerial Systems) has moved beyond the realm of military operations and has made its way into the hands of consumers and commercial industries. Although the applications of UAS in commercial industries are virtually endless, there are many issues regarding their operations that need to be considered before these valuable pieces of equipment are allowed for widespread civil use. Currently, UAS operations in the public domain are guided and controlled by the FAA Part 107 rules after overwhelming public pressure caused by the earlier 333 exemption. In order to approach such larger issues, …

Indiana Local Roads - An Asset Management Guide For Cities, Towns And Counties, Applied Pavement Technology, Inc.

Indiana Local Technical Assistance Program (LTAP) Publications

This Guide is designed to serve as a resource to agencies adopting an asset management philosophy. It presents an asset management process that can be used by any local agency in Indiana. It also introduces common terminology and helpful hints to get you started. The Guide promotes a statewide approach to gather and analyze the information you need to develop an asset management plan. You can use this Guide to: learn more about what asset management is, identify the steps involved with implementing asset management, discover ways to use data to better communicate with elected officials, develop an effective asset …

From Paper To Digital Maintenance With Electronic Signature, Marcelo Backes, Fernando Miwa, Cesar Okajima, Ari Souza Jr., Daniel Tkacz

Graduate Student Works

This research paper reviewed the impact of the implementation of digital maintenance records replacing paper documents in the commercial aviation through gains in efficiency and cost reduction in airplane transitions. Throughout the lifecycle of a commercial airplane, repairs are incorporated, components are replaced and maintenance tasks are accomplished every day, each of those activities generate records that need to be kept and reconciled. Lessors have strict contract terms that require operators to keep all required maintenance documents stored and available so that asset value is maintained, this process is done today mostly with paper documents and is very costly and …

A New Way To Improve Logistics Efficiency And Aircraft-Onground Recovery, Katia Regina Goncalves, Erica Maria Dias Ferreira Cruz Grudzinski, Fabio Pinto, Carlos Alberto De Queiroz, Gilson Macedo Dos Santos

Graduate Student Works

The objective of this project was to bring more efficiency to logistics, improving time of Aircraft-on-Ground (AOG) recovery and developing possible saving for airlines operations. There proposed goal was to develop a system that would allow airlines to easily visualize an available space at the aircraft cargo bay on a desired flight and book its company materials (COMAT) on it, still respecting all appropriate regulation and the final availability of space.

This project was inspired by an existing system called MyIDTravel that allows jointed airline’s personnel to buy available tickets with low fares. The objective was to develop something similar …

Environmental & Economical Solution For São Paulo Congonhas Airport (Iata: Cgh, Icao: Sbsp), Adriana Larcerda, Daniel Fischer P. De Campos, Euler Sousa, Renato Achoa, Renato Carbonieri

Graduate Student Works

The final recommendations of this Capstone Project are to reduce the usage of the aircraft APU, implement noise abatement procedures on departures and landings and use the reverse thrust at idle within São Paulo Congonhas Airport (IATA: CGH, ICAO: SBSP) operations.

The predicted, and conservative outcomes resulting from these recommendations shall impact on reducing noise, carbon emissions and aviation fuel burn, by combining in-flight and on the ground measures.

The noise produced at the airport is estimated to reduce up to 50 dB at a given procedure, which shall improve health, environment and life quality of the population that live …