Engineering Commons^™

A Dynamic Scaling Methodology For Improving Performance Of Big Data Systems, Nashmiah Alhamdawi

Electronic Theses and Dissertations

The continuous growth of data volume in various fields such as, healthcare, sciences, economics, and business has caused an overwhelming flow of data in the last decade. The overwhelming flow of data has raised challenges in processing, analyzing, and storing data, which lead many systems to face an issue in performance. Poor performance of systems creates negative impact such as delays, unprocessed data, and increasing response time. Processing huge amounts of data demands a powerful computational infrastructure to ensure that data processing and analysis success [7]. However, the architectures of these systems are not suitable to process that quantity of …

Development Of Standard Operating Procedure: Admicellar Polymerization Of Polystyrene Thin Film (Aibn) On Polysciences 30-50Μm Glass Beads Using Cetyltrimethyl-Ammonium Bromide Surfactant, David Langford

Honors Theses

Poly(1-phenylethene), commonly referred to as Polystyrene, is one of the world's most common polymers. Made from the monomer styrene (ethenylbenzene), this polymer is used in a wide range of products from packing peanuts to disposable cutlery. The method of polymerization used in this research project is called admicellar polymerization. This process consists of four main steps: admicelle formation, adsolubilization, polymerization, and removal of admicelle and polymer. Admicellar polymerization has a number of advantages over related methods of thin film polymerization including simplicity and low cost of components and process.

A Survey On Research Gaps In Chronic Traumatic Encephalopathy And American Football Players, Thomas Brent Ferguson

Honors Theses

Chronic Traumatic Encephalopathy (CTE) has recently received extensive media coverage, significantly increasing interest in concussions and their relation to the brain disease. As research continues on the disease and the protein Tau that is associated with it, it is imperative to find a correlation between any possible causation other than concussions. All American football players suffer subconcussive impacts, yet only some are diagnosed with the disease, leading most to believe there is something missing. Interviews were conducted with multiple university officials who work in sports and health, former football players, and team doctors. After interviews, 18 former football players who …

Unlv Title Iii Aanapisi & Mcnair Scholars Institute Research Journal, Nir Herscovici, Joyce Hsu, Matthew Khumnark, Joy Lamug, Jeong Lim Lee, Kendall Lyons, Andrea Mandril, Niroshini Moodley, Eric Ng, Timothy Ogburn, Andrew A. Ortiz, Emily Khanh Pham, Nha Trang Vivian Sam, Devlynn Scarpati, Olivia Tsang, Termaine Antonio Turner Ii, Pang Kou Vang, Kanisha Wilson, Shannon Zayas, Claudia Chiang-Lopez, Victoria Copeland, Andrea Darby, Bridgett Giordmaina, Briceida Hernandez-Toledo, Mark Larubio, Ana Lesquives, Yessenia Madrigal, Summer Millwood, Angel Mims, Blaine Pennock, Katie Randolph, Amber K. Stephens, Sarah Werman, Eben-Ezer Arias-Garcia, Ernesto H. Bedoy, Royale Cannon, Irma De Santiago, Lorraine Louise K. Francisco, Imani A. Gayden, Jeffrey Gonzalez, Isaiah Shornell Henry, Ashley C. Lee, Marielle Leo, Elizabeth Ochoa, Bernajane Palisoc, Sean Tanzey, Howard Yanxon

McNair Journal

Journal articles based on research conducted by undergraduate students in the AANAPISI and McNair Scholars Programs

Table of Contents

About AANAPISI

Biography of Dr. Ronald E. McNair

Statements

Dr. Len Jessup, UNLV President

Dr. Juanita P. Fain, Vice President for Student Affairs

Dr. William W. Sullivan, Associate Vice President for Retention and Outreach

Mr. Keith Rogers, Deputy Executive Director of the Center for Academic Enrichment and Outreach

Title III AANAPISI and McNair Scholars Institute Staff

Ms. Terri Bernstein, Director for College Programs

Dr. Matthew Della Sala, Assistant Director for Undergraduate Research

Analysis Of The Production Data From Marcellus Shale Wells, Amanda Parrish

Graduate Theses, Dissertations, and Problem Reports (ETD)

The increasingly prevalent practice of unconventional technologies has called for the need for the critical analysis of production decline rates to meet economic targets. The high early time production returns and transient flow make matching a production curve to known methods of decline curve analysis problematic.

This research focuses on finding a technique that best fits a known production curve and then applying that technique to another well to check its accuracy. The goal is to find the earliest time of production data necessary to predict an accurate production curve over the lifespan of the well. This is essential to …

Dynamic Model And Estimator Development For A Smart Refractory Brick With Embedded Wireless Sensors For Gasifier Applications, Qiao Huang

Graduate Theses, Dissertations, and Problem Reports (ETD)

The operating temperature is one of the most important variables for gasifier operation. A higher temperature can shorten the service life of the refractory lining. A lower temperature can reduce the extent of carbon conversion and disrupt the flow of molten slag in a slagging gasifier. Therefore temperature is one of the most important variable in a gasifier. In slagging gasifiers, molten slag can penetrate into the refractory lining leading to refractory spallation, undesired downtime, and costly replacement. Even though the temperature and extent of slag penetration are extremely important for the gasifier operation, they cannot be measured reliably by …

Availability Of Datasets For Digital Forensics–And What Is Missing, Cinthya Grajeda, Frank Breitinger, Ibrahim Baggili

Electrical & Computer Engineering and Computer Science Faculty Publications

This paper targets two main goals. First, we want to provide an overview of available datasets that can be used by researchers and where to find them. Second, we want to stress the importance of sharing datasets to allow researchers to replicate results and improve the state of the art. To answer the first goal, we analyzed 715 peer-reviewed research articles from 2010 to 2015 with focus and relevance to digital forensics to see what datasets are available and focused on three major aspects: (1) the origin of the dataset (e.g., real world vs. synthetic), (2) if datasets were released …

Regulation Of The Expression And Activity Of Extracellular Signal-Regulated Kinase 3 (Erk3), Lobna Elkhadragy

Browse all Theses and Dissertations

Mitogen-activated protein kinases (MAPKs) are Ser/Thr kinases that regulate diverse cellular processes. Extracellular signal-regulated kinase 3 (ERK3) is an atypical MAPK that has recently gained interest for its roles in cancer. ERK3 promotes cancer cell migration, invasion and drug resistance, and its expression is upregulated in multiple cancers. However, little is known about the molecular mechanisms that regulate ERK3’s expression and kinase activity. Here, we have identified the oncogenic polycomb group protein BMI1 as a positive regulator of ERK3 level in cancer cells. Mechanistically, BMI1 upregulates ERK3 expression by inhibiting the expression of the tumor suppressor microRNA (miRNA) let-7i, which …

Glycolytic Metabolism And Pregnancy Parameters In The Murine Placenta, Renee Elizabeth Albers

Browse all Theses and Dissertations

The placenta is a complex and essential organ composed largely of fetal-derived cells, including several different trophoblast subtypes that work in unison to support nutrient transport to the fetus during pregnancy. Abnormal placental development can lead to pregnancy-associated disorders that often involve metabolic dysfunction. The scope of dysregulated metabolism during placental development may not be fully representative of the in vivo state in defined culture systems, such as cell lines or isolated primary cells. Thus, assessing metabolic function in intact placental tissue would provide a better assessment of placental metabolism. In this study, we describe a methodology for assaying glycolytic …

Phospholipase D: Key Player In Macrophage-Mediated Inflammation And Resolution, Ramya Ganesan

Browse all Theses and Dissertations

Phospholipase D (PLD) is a cell membrane remodeling and signaling protein implicated in the pathology of chronic inflammation. As PLD is also central to macrophage cell migration, we investigated the molecular basis of PLD's involvement and regulation in macrophage-initiated inflammation (atherosclerosis) and resolution. We have found that PLD is associated with signaling proteins and positively affects cell movement, phagocytosis and NADPH-initiated release of Reactive Oxygen Species (ROS). We found that PLD2 but not PLD1 is important for foam cell formation that causes atherogenesis. We have also found a novel way of inducing macrophage class-switch (polarization) by PLD overexpression. PLD induces …

Proteomic Analysis Of Ischemic Stroke Blood Biomarkers, April Arnold Daubenspeck

Browse all Theses and Dissertations

Stroke is a global burden that claims 6 million lives and permanently disables another 5 million each year. The risk of morbidity and mortality following stroke decreases when early diagnosis and treatment are achieved. However there is no blood test to diagnose ischemic stroke because biomarkers to date have not shown adequate sensitivity and specificity to be adopted into hospital protocols. The overall objective of this dissertation was to identify novel blood protein biomarkers of ischemic stroke. We achieved this by using a number of proteomic and statistical techniques to investigate the differential abundance of proteins in the blood of …

Making Meaning: Shifts In Meaningfulness Across Three Modeling Units, Jeannette Manger

Browse all Theses and Dissertations

Recent reform calls for a more comprehensive approach to science education that positions learners as constructors of knowledge via scientific practices (NRC, 2012; Osborne, 2014). This 'practice turn' shifts from passive science learning to incorporating science actions with epistemic thinking (Duschl & Grandy, 2013; Ford & Forman, 2006; Osborne, 2014; Shouse, Schweingruber, & Duschl, 2007). Teachers are often underprepared in understanding the nuances of scientific practices, and frequently struggle with supporting students in meaningful practice engagement (Abd-El-Khalick & Akerson, 2004; Crawford, 1999; Davis, Petish, & Smithey, 2006; Duschl & Gitomer, 1997). Here, I draw upon the Berland et al. Epistemologies …

Difference Between Male And Female Workers Lifting The Same Relative Load When Palletizing Boxes, André Plamondon, Christian Larivière, Denys Denis, Hakim Mecheri, Iuliana Nastasia

Études primaires

A few biomechanical studies have contrasted the work techniques of female and male workers during manual material handling (MMH). A recent study showed that female workers differed from males mostly in the strategy they used to lift 15-kg boxes from the ground, especially regarding task duration, knee and back postures and interjoint coordination. However, the lifting technique difference observed in females compared to males was perhaps due to a strength differences. The objective of this study was to test whether female workers would repeat the same lifting technique with a load adjusted to their overall strength (females: 10 kg; males: …

Effect Of Local Magnetic Field Disturbances On Inertial Measurement Units Accuracy, Xavier Robert-Lachaine, Hakim Mecheri, Christian Larue, André Plamondon

Études primaires

Inertial measurement units (IMUs), a practical motion analysis technology for field acquisition, have magnetometers to improve segment orientation estimation. However, sensitivity to magnetic disturbances can affect their accuracy. The objective of this study was to determine the joint angles accuracy of IMUs under different timing of magnetic disturbances of various durations and to evaluate a few correction methods. Kinematics from 12 individuals were obtained simultaneously with an Xsens system where an Optotrak cluster acting as the reference system was affixed to each IMU. A handling task was executed under normal laboratory conditions and imposed magnetic disturbances. Joint angle RMSE was …

Validation Of Inertial Measurement Units With An Optoelectronic System For Whole-Body Motion Analysis, Xavier Robert-Lachaine, Hakim Mecheri, Christian Larue, André Plamondon

Études primaires

The potential of inertial measurement units (IMUs) for ergonomics applications appears promising. However, previous IMUs validation studies have been incomplete regarding aspects of joints analysed, complexity of movements and duration of trials. The objective was to determine the technological error and biomechanical model differences between IMUs and an optoelectronic system and evaluate the effect of task complexity and duration. Whole-body kinematics from 12 participants was recorded simultaneously with a full-body Xsens system where an Optotrak cluster was fixed on every IMU. Short functional movements and long manual material handling tasks were performed and joint angles were compared between the two …

Autocatalytic Pyrolysis Of Wastewater Biosolids For Product Upgrading, Zhongzhe Liu, Patrick J. Mcnamara, Daniel Zitomer

Civil and Environmental Engineering Faculty Research and Publications

The main goals for sustainable water resource recovery include maximizing energy generation, minimizing adverse environmental impacts, and recovering beneficial resources. Wastewater biosolids pyrolysis is a promising technology that could help facilities reach these goals because it produces biochar that is a valuable soil amendment as well as bio-oil and pyrolysis gas (py-gas) that can be used for energy. The raw bio-oil, however, is corrosive; therefore, employing it as fuel is challenging using standard equipment. A novel pyrolysis process using wastewater biosolids-derived biochar (WB-biochar) as a catalyst was investigated to decrease bio-oil and increase py-gas yield for easier energy recovery. WB-biochar …

Tire-Pavement Interaction Modeling: Hyperelastic Tire And Elastic Pavement, Jaime Hernandez, Imad L. Al-Qadi

Civil and Environmental Engineering Faculty Research and Publications

The interaction between deformable tire and pavement was studied using the validated finite element model; the full understanding of tire–pavement contact has implications for pavement damage prediction and pavement life-cycle assessment (fuel consumption estimation). The tire’s rubber and reinforcement were considered hyperelastic and linear elastic, respectively, with material constants obtained from the tire manufacturer (rubber) and laboratory testing (reinforcement). On the other hand, the pavement was assumed linear elastic supported by linear elastic springs. This assumption was made as a first step to examine the impact of using a deformable-on-deformable tire–pavement system to predict energy in the tire and contact …

Evaluation Of Career Readiness At An Industrial Technology Program Using A Fuzzy Approach, Ahmed Deif, Cameron Stark, Kathryn Butler, Eric Olsen

Industrial Technology and Packaging

In this research, a quantitative model to measure the “career readiness” performance level of the current curriculum of the Industrial Technology and Packaging program at California Polytechnic State University is proposed. Career readiness is first defined through performance attributes and these attributes are further classified into specific categories and metrics. Using a fuzzy logic computational approach, “career readiness” measures are developed and a “career readiness” score referred to as (CRS) is calculated. The model is designed to be flexible, dynamic and easy to use. It should enable a systematic measurement of career readiness by producing a final integrated unit-less score. …

Insights On Lean Gamifications For Higher Education, Ahmed Deif

Industrial Technology and Packaging

Purpose

There is no argument that using games (gamification) is an efficient way of learning in higher education. The questions, though, are which gamification approach is most suitable at that level and how to assess its suitability? This paper aims to attempt to partially answer these two questions, in the context of lean thinking education.

Design/methodology/approach

The paper offers an assessment criteria to investigate the impact of lean gamification based on the evaluation of motivational, cognitive and social processing during games. In addition, a study is conducted among selected games using these assessment criteria. The study included statistical as well …

Evaluation Of Stability Of Unit Loads For Tilt And Shock Events During Distribution, Jay Singh, Koushik Saha, Tyler Sewell, Landon Newton

Industrial Technology and Packaging

Initiatives to lightweight and reduce packaging materials to achieve sustainability goals have created unit load stability challenges in the transportation and handling of palletized packaged goods. Consequently, an increased focus is being placed on evaluating how current pre-shipment performance tests evaluate load stability. This study was undertaken to address the current need for establishing test methodologies towards observing a unit load’s overall stability during transportation and handling related activities commonly experienced in the distribution environment. With this goal, this study developed two test methods as well as apparatus/measuring tool to observe a palletized load’s overall stability. The experimentation involved unit …

Effect Of Liquid Contamination On Hermeticity And Seal Strength Of Flexible Pouches With Lldpe, Francesca Delle Cese, Koushik Saha, S. Roy, Jay Singh

Industrial Technology and Packaging

Flexible packaging is a growing successful market and the majority of flexible package applications are for the food industry. The demand for process optimization and reduced production costs, has led to an increase in flexible packaging. However, fast production lines can result in contamination in the seal area. For flexible food packaging, contamination is considered any food particle or substance trapped in the seal area. Current quality control processes can detect contamination in the seal area, but it is not determined if seal contamination affects seal quality. Oil-based and sodium based snack foods are two common categories that can be …

Diffusion Tensor Imaging Correlates With Short-Term Myelopathy Outcome In Patients With Cervical Spondylotic Myelopathy, Aditya Vedantam, Avinash Rao, Shekar N. Kurpad, Michael B. Jirjis, Gerald Eckardt, Brian D. Schmit, Marjorie C. Wang

Biomedical Engineering Faculty Research and Publications

Objective

To determine if spinal cord diffusion tensor imaging indexes correlate with short-term clinical outcome in patients undergoing elective cervical spine surgery for cervical spondylotic myelopathy (CSM).

Methods

A prospective consecutive cohort study was performed in patients undergoing elective cervical spine surgery for CSM. After obtaining informed consent, patients with CSM underwent preoperative T2-weighted magnetic resonance imaging and diffusion tensor imaging of the cervical spine. Fractional anisotropy (FA) values at the level of maximum cord compression and at the noncompressed C1-2 level were calculated on axial images. We recorded the modified Japanese Orthopaedic Association (mJOA) scale, Neck Disability Index, and …

The Effects Of Ultrasonic And Photochemical Pretreatment On Heating Value And Carbon Capturing Ability Of Fast Pyrolysis-Derived Biochars, Jordan Houry, Dong Joon Kim, Cary Roy

Honors Theses

Slow pyrolysis biochar has been shown to be receptive to ultrasonic and photochemical pretreatment that raises the heating value, surface area, and carbon content of the samples. This experiment was designed to test the feasibility of substituting fast pyrolysis derived biochar in place of slow pyrolysis biochars in order to reduce production times. Furthermore, new biomasses (switchgrass, rice husk, and rice straw) were tested for their receptiveness to pretreatment methods. It was ultimately determined that fast pyrolysis biochars that were exposed to pretreatment increased their carbon content and surface area but did not experience a heating value increase to the …

Hot-Fire Testing Of An Af-M315e 1-Newton Thruster, Alex Mcgee

Honors Theses

AF-M315E is a green monopropellant currently being investigated for use as a potential replacement for hydrazine in low-thrust spacecraft propulsion applications. To support devel- opment e↵orts, a series of hot-fire tests were conducted to assess the performance of AF-M315E in a 1N thruster. Preliminary design and analysis shows an increase in performance versus a comparable hydrazine system. Testing was conducted with a 1N TZM (titanium, zinc, and molybdenum alloy) thruster in late July 2016 in collaboration with the Spacecraft Propulsion Systems o ce (ER23) at Marshall Space Flight Center (MSFC). Testing focused on character- izing the transient behavior of the …

Geotechnical Laboratory Testing For 2-D Fem Analysis Of Geomorphic And Planar Sloped Caps And Covers For Sustainable Mine Refuse Deposition, Sun Hee Park

Graduate Theses, Dissertations, and Problem Reports (ETD)

This thesis reports the findings of the application of Geomorphic Landform Design principles to the Royal Scot abandoned coarse coal refuse (CCR) pile located in Greenbrier County, West Virginia. The Royal Scot facility has many environmental concerns including severe erosion, acid-mine/rock drainage, and sediment transport. A cap and cover system is proposed to be implemented which incorporates the GLD principles. A two-layer cap and cover system will be used to reclaim the site and return it back to a stable state and reduce the production of acid-mine drainage. The system is composed of a hydraulic barrier composed of compacted CCR, …

Characterization Of Thermoplastics For Leaf Spring Application, Marvin Alejandro Munoz

All ETDs from UAB

Composite materials, especially thermoplastics, are now used extensively in the automotive industry to replace metal components. Three different glass fiber reinforced thermoplastic composites were compared to obtain an equivalent performance of a steel leaf spring. Polyethylene Terephthalate Glycol (PETG), Polyamide 66 (PA 66) and Polyphenylene Sulfide (PPS) were the matrices considered for this research work. Mechanical testing (tensile, compressive, shear, flexural and moisture absorption) was performed to these three thermoplastic composites concluding that PPS is the best choice since it displayed the best overall properties. Once PPS was selected, a Design of Experiment (DOE), based on three level (3^k) factorial …

A Comparison Of The Bond Strength Of Spun And Static Cast Concrete Specimens, Kalyn Nicole Murray

All ETDs from UAB

The purpose of this study is to determine the pullout bond strength of seven wire steel strand in two types of concrete: spun and static cast. It is perceived that the spinning process used in the manufacturing of concrete poles introduces compaction forces that densifies the concrete and hence, improves the steel to concrete bond. Studies have successfully been conducted determining the bond strength of steel and concrete using the pullout test method; however, there are not any studies known of that address centrifugally cast concrete. In order to obtain data for the research, an experimental program was designed to …

An Improved Contact Method For Multi-Material Eulerian Hydrocodes, Kenneth Cline Walls

All ETDs from UAB

Realistic and accurate modeling of contact for problems involving large deformations and severe distortions presents a host of computational challenges. Due to their natural description of surfaces, Lagrangian finite element methods are traditionally used for problems involving sliding contact. However, problems such as those involving ballistic penetrations, blast-structure interactions, and vehicular crash dynamics, can result in elements developing large aspect ratios, twisting, or even inverting. For this reason, Eulerian, and by extension Arbitrary Lagrangian-Eulerian (ALE), methods have become popular. However, additional complexities arise when these methods permit multiple materials to occupy a single finite element. Multi-material Eulerian formulations in computational …

Augmented Framework For Generating Domain-Specific Mobile Applications, Rama Krishna Raju Rudraraju

All ETDs from UAB

In this research, we developed a new approach called Augmented Framework to mean the integration of existing frameworks with domain-specific knowledge. The resulting framework provides a productive development environment suitable for app-developers to generate customized mobile-applications in the domain chosen by the framework developer. This process requires the application developer to provide specifications about the domain for customizing the generated mobile-applications. With this approach, the entire process of developing a mobile-application becomes simplified since it will only need minimum design and development effort. The approach for developing an Augmented Framework consists of three stages. The first stage consists of the …

Object Detection And Path Detection System For Autonomous Terrain Vehicles, Avinash Kumar Singh

All ETDs from UAB

Every year’s thousands of people died in road accidents worldwide. The autonomous vehicles provide a better solution for this kind of situations. The autonomous vehicles move freely in an outer environment and perform different types of tasks according to the condition. The moving object detection in real time and perform the action are always considering important part in autonomous vehicles. To demonstrate the concept of the autonomous vehicle, we design an autonomous all-terrain vehicle model. In this thesis, we used the two types of distance measurement sensors i.e. Ultrasonic and Sharp Infrared sensors. These sensors are connected to the Arduino …